PSE11 - installing error 1935 rolls back

I have tried several suggestions to install PSE 11 on my Windows 7 computer, without any success. The installation stops, rolls back, and error 1935 shows up. Adobe, nor Microsoft, seem to have a clue on what will work on my machine. Some suggestions get too deep into the computer for me to follow. Since I am not that advanced in tinkering in areas that I could screw up the parts of the machine that works, I wonder if Windows 7 has a problem that cannot be fixed. Others have experienced the same issue with error 1935.
I am not willing to try Windows 8 if Microsoft cannot fix this problem on 7.
For now I am stuck without my new version of PSE being usable.

The following article is for Acrobat or Reader but might work for you:
http://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html

Similar Messages

Photoshop 12 error 1935 roll back

I have received the error 1935 the roll back error in windows for photoshop 12 I have tried to resolve it but the file 00BE does not show on the C: drive

Hi Chrisvgr,
Thanks for posting on Adobe forums.
Please try steps written in the doc :
http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html
for more information about the error Please check this document from Microsoft:
http://support.microsoft.com/kb/926804
Thanks
Sandeep

It will not let me install Itunes 1.6.1 on my Windows 7 OS and keeps coming with an error and rolls back, what can i do?

Everytime i tried to update my i tunes to 1.6.1 it wouldn't let me and came up with this error.
I'd hit OK then it would roll back and start again and end with this error
Anything i can do?

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070002, or some other number? (If they're another number, what number are you getting?)

Install Error 1935 Adobe Premier Elements 10 Windows 7 64

So Windows 7 looks like it's finishing up installing Premier Elements 10 when I get an error message and Windows rolls back the install. I know others might have had similar issues but I haven't found any sort of solution that works.
I spent about 6 hours trying different things. Trying to use safe mode and running without any extra services through MSconfig.
I even tried reinstalling NET Framework and changing the registry keys (which I wasn't able to do since it won't let me delete the .NET Framework key even with permissions.)
I also downloaded the trial version of Premier elements but it came up with the same error message.
Here is what I keep on getting:
I will be calling the phone support on Monday but I have a feeling they will say it's just something wrong with my computer. Which I don't think is possible because I was able to install the Vegas HD trial and other programs easily enough.

Well I went through that list before. I did try yet another install using all those suggestions. No Dice.
The only thing I can come up with is that I tried to install a really old version of premiere 7 that wasn't able to be installed since it wasn't supported by Windows 7. So maybe that screwed up things?
Either that or I just have severe Registry issues with NET Framework and I can't get those keys fixed. But again I am able to get other programs installed and whatnot.
I have already tried to clean up my registry a few ways.
The only thing I can think of to get this program installed is to do a complete windows 7 reinstall and that would just be a giant pain. But still, I paid good money for this product.
I will wait and contact customer support on Monday.

ITunes 10.5.1 won't install. Keeps "rolling back" when nearly complete...

I've emptied the temp folder, deleted the old version of iTunes, downloaded the installer to install from my desktop. It goes all the way through the installation process, then at the last minute "rolls back" and gives me an error message saying to try it again. I've tried several times. What's blocking the installation? Thanks for your suggestions.

unplug phone from computer.
Update computer ( apple menu)
DO NOT UPDATE ITUNES
After each update go back to apple menu and check for updates.
Only when you have completely updated computer ( only itunes comes up for updating) do you update itunes.
Follow all instructions.
Then restart computer.
Plug in phone.
Message appears... do you want to update..... follow instructions.
It actually took me the better part of sunday afternoon, but worth it.

Acrobat XI Pro install errors 1935 &1603

Hi,
I have just upgraded from CS3 and run the Creative Cloud installer app but am having problems with Acrobat (whereas Indesign and Photoshop installed fine) on my workstation that is running Win 7 64-bit.
I have therefore uninstalled all Adobe products, run the Adobe CC Cleaner, checked .Net (currenly 4.5.1) is up to date and restarted but no luck as the attached screen grab where the 'more information' link states:
"Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {C6357C55-7461-3D51-9AE5-FD71CA24027A}. HRESULT: 0x80070422.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {C6357C55-7461-3D51-9AE5-FD71CA24027A}. HRESULT: 0x80070422.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Anyone any suggestions? Thanks v much if so.

Hi Mark ,
Please see the links below mentioned for the Errors.
Error 1603 http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Error 1935 http://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Error 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Let me know if it helps.
Thanks!
Eshant

Server 2008 R2 SP1 - Software install - Error 1935 HRESULT:0x800736B5

I'm working on an error installing a product on Windows Server 2008 R2 SP1 machines. The server has been acting as a file server for months with no problems. The application requires .net 3.5 and .net 4 client profile to be installed. I'm able to pass the
prerequists portion of the installation but eventually the software halts near completion with the error
Error: 1935.An error occurred during the installation of assembly component {106BBB06-46FA-8A99-8361C13A0C}.
HRESULT: 0x800736B5.
I've found a couple articles that reference this article
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1935an-error-occurred-during-the/7105ee7e-ab45-4bd2-b5db-a3e9002f7f9e , which I've tried with no success.
The other article I found was
http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/error-code-1935-during-installation-on-windows-7/daee32ef-58f0-4d24-a1e0-8bfdab66185f which again I found no success with.
The weird thing about this error is that I cant find anything useful from the event viewer. Does anyone have any thoughts on this?
Thank you in advance!

Hi,
Thanks for posting in the forum.
Before going further, would you please let me know what the product you want to install on the server is? At this time, you could try to disable the anti-virus program first if it is installed
on the server. Then please try to reinstall the two version of .Net Framework and Visual C++ 2005 / 2008 Redistributable Package to see if the issue could be resolved.
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Adobe XI Pro Installing Error 1935

I tried to download trial Adobe Acrobat XI Pro but this message keeps appear.
I used Chrome to download the Adobe Download Assistant.
I have Windows 7. Please help me on this problem.

Try Error 1935 | Install | Acrobat, Reader | Windows

Elements 10 installed, then installation rolled back. Why?

Elements 10 installed, then rolled back. Why?

It could be due to Adobe Bridge running already. I would recommend reviewing Install rollback | Photoshop Elements | Windows - http://helpx.adobe.com/photoshop-elements/kb/install-rollback-photoshop-elements-windows.h tml. Please feel free to respond to this thread if you have any questions regarding the steps listed.

Zen Xtra won't connect for Firmware Install. WMP Rolled back to v

My Nomad Jukebox Zen Xtra would not load firmware from it's hard dri've. It only entered into a cycle of displaying the 'Creative' then 'EAX' screens. I Downloaded the latest version of firmware 'ZenXtraP4SAudible_PCFW_LB_2_0_03' and installed it following the instructions on the Creative website.
The install started initially but then failed because either the software installing the firmware, or the zen xtra, locked up. I left it for nearly an hour and had no choice but to cancel and try again.
Since this time I have been unable to load any version of firmware to the zen xtra. The installer says that the zen is not connected even though it is. When I do connect it, the 'autoplay' dialog appear asking me what to do. So, the computer recognises the device as 'NOMAD Jukebox Zen Xtra' but the firmware installer will not recognise it at all.
I have carried out a 'Reload OS' in preparation for new firmware. I have also carried out a 'Format All' and 'Clean Up' from the Recovery Menu that the zen xtra is now stuck in. All appears to be fine with the Zen's hard dri've as, on completion of the format, the hard dri'ves shows 'Freespace 3833.7MB'.
I have looked on this discussion forum and FAQ and this appears to be a common problem but have found no solutions. I have tried uninstalling Windows Mediaplayer and rolled back to v0 and reinstalling drivers and MediaSource software but problem persists. Please help.

OK. Sorted it! Try this!
http://www.anythingbutipod.com/forum/showthread.php?t=9829
Turns out you have to uninstall Windows Media Player Runtime v as well as WMP itself.
Also, if you have the problem with reduced HDD space because of installing PlayForSure firmware, you could install a bigger hard dri've. They are the generic 2.5 inch hard dri'ves fitted in Laptop Computers! My 40Gb Zex Xtra now has the 80Gb HDD I removed from my VAIO! And it was easier to do on the Zen than it was on the VAIO!

Latest update of Itunes...when attemptin to install it kept 'rolling back'!

HI
my problem is this...
basically i attempted to download and install the latest itunes after it prompted me when i went into itunes. so i did this. when it got to last quater of the installation it started rolling back...it says it requires quicktime but quicktime is supposed to come with it!!! i dont understand....please help..i have tried this several times.
i have an ipod mini. if thats any help.
ricky36

Hi,
You must foloow these steps:
1 - Uninstall iTunes and (if it is possible) Quicktime
2 - You must download the Windows Inatll Clean Up utility from Microsoft
3 - Using this tool you must remove iTunes and Quicktime only
4 - Reboot your computer and install iTunes again
Must work...
Joao

Installing itunes + quicktime rolling back action issues

hey, i know this has been mentioned before, but i have been searching hours on end to try and fix this and nothing so far
I just got an ipod touch, and when i go to the apple site to download the itunes and quicktime, i go to install and it keeps rolling back action and in the end it says that "quicktime was unable to install, itunes needs quicktime to install". I tried downloading both of the separately and they both keep rolling back actions. I dont have itunes or quicktime installed on my computer previously, and I am running them as administrators.
this is really frustrating as I cant even turn on my ipod touch because I cant install itunes, any help with this problem?

seein if anyone has a chance to help out

Msxml6.dll error causing roll back on PSE 9 install.

I just bought PSE 9 today. I've never used it or any previous versions before, and at this rate I probably never will. I've spent the last four hours trying to get this program to install to no avail. What I thought was going to offer me a fun new hobby has done nothing but provide me with a whole lot of frustration. Tech savy, I am not, and after searching this site, its forums, and elsewhere on the net, I have been unable to find a solution that actually solves my issue.
I don't know what information is pertinent for proper troubleshooting, but I'm trying to install on a Vista. The install seems to get very close to what I would image to be success, before crashing. The stated cause being an error with msxml6.dll.
I would be a very happy individual if someone can offer me some help with this.

Googling for msxml6.dll error got me here: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/error-cwindowssystem 32msxml6dll-is-either-not/5f9f4f2d-e124-4dc9-90ea-1b668a7cfc63
It may be worth a try...
Juergen

Transaction rolled back by an internal error

Hello
I am wrting a stored procedure .
In that i wrote a while loop.
The Requirement is even though any exception is caught it should continue.
If ant exception is occured I am getting the error transaction rolled back by an internal error and execution exits.
But it should continue.
I am not using any transactions.
Please help me.

Hi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K

Websphere 5.0 & JDBC : LocalTransaction rolled-back due to setRollbackOnly.

Hello,
I'm using WAS 5.0 & Oracle. I'm getting following error.
Resource cp_fcatretail_user_A1 rolled back in cleanup of unresolved LocalTransactionContainment.
LocalTranCoor E WLTC0032E: One or more resources rolled back. An unresolved LocalTransactionContainment had an unresolved action of rollback.
*5258e643 WebAppTransac E WTRN0043I: LocalTransaction rolled-back due to setRollbackOnly.*
*[Servlet Error]-[LocalTransaction rolled-back due to setRollbackOnly]: com.ibm.ws.LocalTransaction.RolledbackException*
at com.ibm.ws.LocalTransaction.LocalTranCoordImpl.cleanup(LocalTranCoordImpl.java:1091)
Plz help me out.
Thanks in Advance
Edited by: PremInd on Dec 27, 2007 2:44 PM

PremInd wrote:
No.. I have wriiten all transaction correctly.
WAS seems to disagree with you.
I think , this problem related to WAS configuration.Aren't your transactions declarative? That is configuration.
Please any one have idea, come forward.All you jokers with nothing to say take one step back.
%

PSE11 - installing error 1935 rolls back

Similar Messages

Maybe you are looking for