PSE12: Camera Raw 8.5 installed. Unable to install Camera Raw 8.7.

PI have elements 12, after installing raw 8.7 raw is still the previous 8.5 altho' the installation said be installed correctly

Photoshop Elements 12 is only compatible with versions of Camera Raw to 8.5.

Similar Messages

ITunes won't install "Unable to instal GEAR driver set"

I tried to update to itunes 8 and it gave me this message but then it let me update my iphone to 2.1. Afterwards it then told me that my phone won't work without itunes 8 and now i can't install an older version of itunes. Please HELP! i have no phone now and i desperately need help!

May want to check this out:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452

HP Pavilion g6 2201AX - no Audio driver installed, Unable to install dobly advanced studio. Need Hel

HP Pavilion g6-2201AX Notebook
OS: WIndows 7 Ultimate 64 Bit
Audio driver not installed, Dolby advanced studio asking for PCEE to be installed, Not getting the right set of drivers for my laptop. need help

Hello balamuralee. I understand that you're having problems getting your audio driver to install.
Have you tried using HP Support Assistant to download the drivers for your notebook? This application can normally locate most drivers which your notebook needs.
Let me know if HP Support Assistant is able to resolve your issue.
Have an excellent day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Unable to install Camera Raw 6.3

Recently upgraded from PSE7 to 9 however found that my raw files from my camera were not supported (canon 550d). Downloaded camera raw 6.3, however I cannot install/run the program. In the Adobe Application Manager (Updates) I get the following: Some updates failed to install preceeded by a red triangle. In the box below I get: Update is not applicable. I am using Windows 7, upgrade from Vista.
Any ideas/help/solutions would be greatly recieved.

Ankush,
Manythanks for the reply. Yes I was attemping to install the wrong version and
have now updated to the correct version however I still get an error message
saying "Unable to use Camera Raw plug-in. It is not compatible with this version
of Photshop Elements". I can see my image when on a thumbnail view but when I
select open the error message appears. Any ideas?
Regards,
Bob

Unable to install Elements Update Camera Raw 6.6

Due to error code: U44M2P7, I am unable to install Camera Raw 6.6 update for Elements 10.

Please try applying the update directly from the Camera RAW section of our Product update page at http://www.adobe.com/downloads/updates/. If you continue to have difficulties then please review the install logs for the update to locate the cause of your difficulties. You can find details on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Unable to install Camera Raw update in PSE trial

New Trial user and unable to import Raw file and unable to download camera raw plug-in.
Message title was edited by: Brett N

Frederick2013
I think that I can help but am definitely going to need more specific information:
1. What version of Photoshop Elements and or Premiere Elements do you have and on what computer operating system is it running?
2. If you go to Help Menu/Updates in either the Photoshop Elements Full Editor or Premiere Elements workspace, are there any updates waiting for you?
3. When you attempt to do the Help Menu/Updates, are you getting an error messages relating to Servers or other?
4. What do you want to do with the raw file that you intend to use with an Elements program:?
a. Edit in the Camera Raw Dialog in accessed from Photoshop Elements?
b. Import a raw or dng image into Premiere Elements for media purposes, not editing in the Camera Raw dialog?
5. From what camera are these camera raw files coming?
The answers to all of the above are expected to resolve the matter for you.
Looking forward to your follow up.
Thanks.
ATR
Add On...Are you having trouble posting a reply? I ask since I do not see a reply message in your post which is designed 2.

Unable to open Camera Raw 6.7 from Bridge CS5

I am unable to view the RAW images that were taken on my D90 in Bridge CS5. They show up blank with the Camera Raw logo in the center and "NEF" in the upper left hand corner. This is the first time this problem has occured because I was (and still) able to view RAW images taken from my old D40. I have tried everything including updating my Camera Raw to version 6.7.0.339, but to no avail! I have no error messages, btw. I am operating Bridge and Photoshop CS5 on Windows 7 (32-bit). I found this thread, and it seems extremely helpful, but it's for Mac users: http://forums.adobe.com/message/2842306

All you need to do now is to refresh (purge) the cache. Everything is fine with your install.
That the right version of the ACR Plug-in is installed in the correct location is proven by the screen shot of the "About Camera Raw" splash screen. It would not show up in "About Plug-in" if it were not in the correct location.
I also take it only one instance of Camera Raw shows up in your list.
I see absolutely nothing in your first screen shot that would prevent you from sliding your mouse over to the "Purge Cache for This Folder" menu command and then letting go of the mouse. That's all it takes. That menu item does not appear to be grayed out. The only thing that is not clear is whether you do in fact have a folder selected.
The reason you see the generic NEF icons without preview is that the cache for that folder was built when you still had an older version of ACR that did not support your camera. That's why the cache needs to be purged (refreshed) now.
Humor me for a second and perform the following experiment: Select all the generic icons you see in the Content panel in Bridge and right-click on them in order to call the "Purge Cache for Selection" command you had discovered earlier and mentioned in a previous post. You should see the icons turn into thumbnails before your eyes.
Now you can just use the "Purge Cache for this Folder" command on any other folder containing generic NEF icons without having to select the individual icons at all.
If you already have a bunch of folders harboring generic NEF icons, go ahead and use the central Purge Cache command in Bridge preferences to purge the entire Bridge cache on your disk in one fell swoop.
Hope this helps. Let me know.
Message was edited by: station_two

I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

The D610 needs ACR 8.3 so you are easily covered there. I am not entirely clear on the process you are using the bring the files onto your hard drive. The safest way is to simply bring all the NEF files into a folder on your hard drive, then find them with bridge and open from there.
If still stuck, open Photoshop, and go Help > About plugins > Camera RAW and check that 8.7 installed OK.

After Downloading and Installing any version of Camera Raw after 8.3 the installation completes but 8.3 remains, how can I resolve this?

I am using Windows 7 Home Premium, with Adobe Design and Web Premium CS6.. I previously had this same problem installing Camera Raw 8.3 and as a work around back then, Adobe Support manually edited the Registry of my Windows 7 laptop to enable Photoshop CS6 and Bridge CS6 to recognise the Adobe Camera Raw 8.3 software so I could edit my files from my then new Nikon D610 camera... Now when I receive and install any updates for Camera Raw the installation says it was successful but the old 8.3 version of Adobe Camera Raw remains when launched via Bridge or Photoshop.. which means I am unable to edit any files with the New Nikon D750 , or even the D810, can someone please help me solve this issue once and for good.. Thanks, please?!

Download the latest version: Parallels Desktop 8.0.18483. Uninstall the one you have then install the new version. The uninstaller will either be in your Applications folder or on the disk image for the version you now have installed.

Unable to update Camera Raw 6.7 for PS CS5

After updating my OS to Windows 8.1, and reinstalling Photoshop CS5 and updates to version 12.0.4, I have been unable to complete the Photoshop Camera Raw 6.7 Update. All other updates to PS and Bridge installed correctly.
The update file downloads completely from http://www.adobe.com/downloads/updates.html, but immediately fails with the following screen:
"Some updates failed to install."
"The following updates were unable to install. If you wish to install these updates, please fix the problems below and retry:
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later."
Is there a known workaround for this problem?

Please provide me with a snapshot from Ps->Help->Update->Preferences.
Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

Elements 7 on windows 7, have downloaded a new version on raw for my new camera eos50d still unable to read the raw files help

Hi
Hope someone can help me with this one, have a new computer with windows 7 as the operating system, have installed elements 7 and have now purchased the 50d, as i shoot in raw have tried to open the file but elements is unable to read the raw file, have looked on various threads and have downloaded the new version of raw, this version is saved in my download file directory, have copied across these files to the elements folder but i still cannot read my raw file for the 50d, is there something i have missed.
collisa

please have a look at the folllowing link about the isntallation of the camera raw plugin.
http://kb2.adobe.com/cps/407/kb407344.html
be sure not to have the older version of camera raw plugin in the same folder as that of new one. dont even rename it. Remove it and store it in some other location in case you need to revert back the changes. The camera raw plugin is called : Camera Raw
thanks

Unable to open camera raw 6.0 from Bridge CS5

I just Installed photoshop CS5 and I am unable to view and open my NEF files in Camera Raw from Bridge CS5. It worked perfectly fine with Bridge CS4 and Camera Raw 5.1.0.30. Anyone has any suggestion other than using my old Bridge CS4. I have mas OS X 10.6.3 installed on my computer.
Many Thanks

Natdale wrote:
I have de-installed and re-installed the entire photoshop CS5 and it is still the same... I am at lost and using my old CS4 bridge for now.
You'll need to confirm that the Camera Raw plug-in was correctly installed so that both Photoshop _AND_ Bridge can access it. For Mac the only correct location that is should be installed is: the root level Library (not the user Library). Inside of the Library look at Application Support/ Adobe/Plug-ins/ CS5/ File Formats/ Camera Raw.plugin
If the Camera Raw plug-in isn't there and/or any of these folders are not there then Camera Raw is not properly installed...if Camera Raw is correctly installed then you may need to do several things...first, in the folder you are trying to see raw images, go up under Tools/ Cache/ Purge Cache For Folder. If that doesn't work you may need to trash your Bridge CS5 preferences. To do that, hold down the Command/ Option/ Shift keys while double-clicking the Bridge app icon and choosing Reset Preferences...
If Camera Raw was not properly installed, sorry, can't help you...you may need to contact Customer Service for installing tech support.

Unable to view camera RAW files on Windows 7 and CS4 - Have tried updates

All working OK until 8 days ago, then bridge just disappeared completely. Looked like it had opened but would disappear when I clicked on the icon. Re-installed, Bride now visable but unable to view .CR2 files in camrea RAW or in Photoshop, comes up as "unable to open". Have tried to install the 5.7 camera raw update, extract files, click on application, then photoshop opens and advises "invalid file type". Not sure what to do now and have a large number of weddin files slowly building up .... PLEASE HELP!!

When something works one day, but not the next, then something has changed. The task is to find out what that is.
Have you installed new hardware?
Have you installed new software?
Have you had any major updates installed?
Those are but a few things to ponder.
You might want to create a new System Restore Point (on a PC) for today, and then boot to Safe Mode, choosing System Restore, and choose a point, from at least 8 days before. Reboot, when prompted, and test. At the least, you have only lost a few minutes, as you can Restore to today's System Restore Point. The Mac has something called Time Machine, and I would think that it could do similar, but just do not know, as I am a PC-only guy.
Good luck,
Hunt

Unable to view RAW thumbnails in Bridge since getting new camera

Hi,
I have just purchased a new camera, and am unable to see the RAW file thumbnails as I would normally, when using the Photo Uploader in Bridge.
I have Elements 8, on a Mac.
I have downloaded the latest version of ACR, 6.2, in order to recognize the new camer's RAW files.
I can see the RAW image, but only if I open it via PSE8, and not when uploading to the Mac via Bridge. The only way I can see and process the RAW image is if I open the file via PSE8. If I look in Bridge, all I can see are lots of generic thumbnail images from PSE8.
My question mainly is how do I resolve this, as I am used to being able to see all of my RAW files in Bridge, and like using Bridge.
Do I need to update Bridge separately from ACR 6.2?
Many thanks.

Hi Barbara,
are you saying that I will not be able to use Bridge with any RAW file taken with the Lumix LX5?
If that is the case, what are m options? I would like to be able to see the thumbnails of the photos I have taken, in a Workspace setting, but at presnt, all I can do is see an individual photo by opening it via PSE8.
This is now extremely cumbersome, and frankly a real pain.
Would there be any advantage to purchasing PSE9?
I would appreciate any help at all.
Dokotela

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

Photoshop Camera Raw 7.4 Update is not installing because of Error Code U43M1D207. What needs to be done to resolve this error code issue?

Photoshop Camera Raw 7.4 update is not installing because of error code U43M1D207. What needs to be done to resolve this issue?

If you need to post again, please keept the following in mind:
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

PSE12: Camera Raw 8.5 installed. Unable to install Camera Raw 8.7.

Similar Messages

Maybe you are looking for