PSE12 download keeps failing with error codes DF006 and DF016. [was:Question]

I have purchased elements 12 for my Macbook pro but the download keeps failing with error codes DF006 and DF016.
What can I do?

Is there an Exit Code indication that precedes the DF indications? If so, try searching this forum using that "Exit Code #" substituting the number for #

Similar Messages

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

SSPI handshake failed with error code 0x8009030c and Login failed for user''

I got the following error when tried to connect to local machine in the
non-domain environment with Windows Authentication by SSMS.
"SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security."
"Login failed for user''. the user is nothing associated with a trusted SQL server connection."
questions
1,if I saw the "SSPI handshake failed ", does it means it must used Kerberos but failed? or it is also possible used the NTLM but failed?
2,Any ideas for this issue?
Please click the Mark as Answer button if a post solves your problem!

Hi Michael,
Firstly, "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos authentication. For more details about "SSPI Handshake Failed" error, please review this
FAQ.
Secondly, regarding to your error message, it could be caused by loopback check. To resolve the issue, please set the DisableLoopbackCheck registry entry to 1 by performing the following steps.
1.Click Start, click Run, type regedit, and then click OK.
2.Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3.Right-click Lsa, point to New, and then click DWORD Value.
4.Type DisableLoopbackCheck, and then press ENTER.
5.Right-click DisableLoopbackCheck, and then click Modify.
6.In the Value data box, type 1, and then click OK.
7.Exit Registry Editor.
8.Restart the computer.
There is a similar blog about your scenario for your reference.
http://www.bhcblog.com/2009/10/08/fix-for-login-failed-for-user-the-user-is-not-associated-with-a-trusted-sql-server-connection/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Office 2010 Service Pack 2 (SP2) installation failing with error code 0x80070643 and B56

I've been trying to install Office 2010 service pack 2 (32 bit) multiple ways without success. I've tried getting it directly from Microsoft Update, downloading the full file from Microsoft and installing it, using WSUS to deploy to clients, and I've tried
using LANDesk to deploy it. All methods are failing.
I need a solution that doesn't involve touching each PC manually, as I have a feeling this error is going to occur on several hundred PC's in my organization. So far on a group of 15-20 test PC's, every one has failed. We have not had problems with any other
Microsoft Updates before this one.
When I try Microsoft Update, I receive the following error:
Code B56 Windows Update encountered an unknown error.
Below is the WindowsUpdate.log excerpt:
2013-08-06 12:45:33:313 3952 dc4 Handler :::::::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler :: START :: Handler: MSI Install
2013-08-06 12:45:33:328 3952 dc4 Handler :::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler   : Updates to install = 7
2013-08-06 12:45:33:328 3952 dc4 Handler Extracting MSP file stored in CAB officesuiteww-x-none.cab
2013-08-06 12:45:43:671 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:671 3952 dc4 Handler Extracting MSP file stored in CAB proofing-en-us.cab
2013-08-06 12:45:43:702 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:702 3952 dc4 Handler Extracting MSP file stored in CAB proof-fr-fr.cab
2013-08-06 12:45:43:983 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:983 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64ww-x-none.cab
2013-08-06 12:45:44:217 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:217 3952 dc4 Handler Extracting MSP file stored in CAB officesuitemui-en-us.cab
2013-08-06 12:45:44:482 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:482 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64mui-en-us.cab
2013-08-06 12:45:44:529 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:529 3952 dc4 Handler Extracting MSP file stored in CAB proof-en-us.cab
2013-08-06 12:45:44:716 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:716 3952 dc4 Handler   : Batch installing 7 updates
2013-08-06 12:45:46:417 3952 dc4 Handler List of MSPs in transaction:
2013-08-06 12:45:46:417 3952 dc4 Handler   C:\Windows\SoftwareDistribution\Download\29f5035d168bf9e9d0369f84037ff787\img\officesuiteww-x-none.MSP
2013-08-06 12:45:46:417 3952 dc4 Handler MSP final command line: DISABLESRCPROMPT=1 LOCALCACHESRCRES=0 NOLOCALCACHEROLLBACK=1 REBOOT=REALLYSUPPRESS MSIRESTARTMANAGERCONTROL=Disable
2013-08-06 12:46:42:265 112 600 Report Uploading 2 events using cached cookie, reporting URL =
http://wsus:8530/ReportingWebService/ReportingWebService.asmx
2013-08-06 12:46:42:358 112 600 Report Reporter successfully uploaded 2 events.
2013-08-06 12:47:52:012 3952 dc4 Handler MSP Error List:
2013-08-06 12:47:52:012 3952 dc4 Handler 1: 2902 2: ixfAssemblyCopy
2013-08-06 12:47:52:012 3952 dc4 Handler   : MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: First failure for update {365F23BF-5D31-4811-A197-29C2C0751961}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = InstallFiles
2013-08-06 12:47:52:012 112 938 AU >>## RESUMED ## AU: Installing update [UpdateId = {9C5E43A3-3AE9-434D-B105-A9D7902D5F9F}]
2013-08-06 12:47:52:012 112 938 AU   # WARNING: Install failed, error = 0x80070643 / 0x00000B56
2013-08-06 12:47:52:012 3952 dc4 Handler   : WARNING: Operation failed at update 0, Exit code = 0x8024200B
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::
2013-08-06 12:47:52:012 3952 dc4 Handler :: END :: Handler: MSI Install
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::::::
2013-08-06 12:47:52:168 112 5c4 Agent *********
2013-08-06 12:47:52:168 112 5c4 Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2013-08-06 12:47:52:168 112 5c4 Agent *************
2013-08-06 12:47:52:168 112 938 AU Install call completed.
2013-08-06 12:47:52:168 112 938 AU   # WARNING: Install call completed, reboot required = No, error = 0x00000000
2013-08-06 12:47:52:168 112 938 AU #########
2013-08-06 12:47:52:168 112 938 AU ## END ## AU: Installing updates [CallId = {87C0C0A5-18CE-45A0-9376-989DCA9CACCA}]
2013-08-06 12:47:52:168 112 938 AU #############

I too have been unable to install the Office 2010 SP2 update on either a Win7 or a Win 8 system. Researching the errors I got led me to discover the following:
1. Many people are encountering errors during the SP2 installation. Some were able to get around it by downloading the self-installing package and bypassing Windows Update. Some were able to get it installed by first doing a Repair on Office 210 itself
first, and then installing SP2. But many others have not been able to install it at all.
2. Apparently a common and insurmountable issue that prevents SP2 from installing is the lack of the MSOCACHE directory. This directory normally gets installed on a machine during the original install of Office, and contains all the install files used
during the installation. Apparently the idea behind creating MSOCACHE was to allow subsequent updates without requiring the user to have the original source CD available.
The problem is that if MSOCACHE is deleted, which is an option many people choose, you can then no longer do any updates to Office.
I am one of those people.
I found a posting that described a way to recreate MSOCACHE from the source CD. I did that, and the SP2 update actually got farther - it started to install stuff but then stopped and asked for a particular file. I found the file on the CD and
pointed the installer to it, but it said the file was not found and quit. So my install still failed.
The last response I got at the Microsoft Answers site was to wait until SP2 is debugged. It's not clear to me this will ever happen, but we'll see.
Birk Binnard http://www.birkbinnard.com

OLEDB select from Analysis Services fails with error codes 0x80040E21 and 0xC0202009

Hi,
In IS2008 SP1, I have an OLEDB source component that uses an Analysis Services OLEDB connection to run an MDX statement (set in the "SQL command text" property). This already worked for other cubes with the same MDX statement (apart from different hierarchy
and cube names) in several other IS packages.
But in this package, I keep getting the following errors when executing:
Error: 2011-12-08 14:12:42.70
   Code: 0xC0202009
   Source: myDataflow myOLEDBsource [190]
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80040E21.
End Error
Error: 2011-12-08 14:12:42.70
   Code: 0xC004701A
   Source: myDataflow SSIS.Pipeline
   Description: component "myOLEDBsource" (190) failed the pre-execute phase and returned error code 0xC0202009.
End Error
As usual with AS OLEDB, you get warnings for all columns that the data type is unknown and hence set to DT_WSTR(255). This is the case for the working packages and for the non-working one.
And when I click on the "Preview" button in the OLEDB source, I see the three column two row resultset as expected.
As I found some other posts with similar error messages that could be resolved by changing the 32 bit and 64 bit setting, I tried in BIDS 2008 (32 bit) on Vista 32 bit, dtexec 32 bit on the same computer, dtexec 64 bit and dtexec 64 bit on a Win2008 server,
all with the same results.
SQL Server Profiler shows that the MDX statement is executed without errors when running the package. I do not see any relevant difference between the working packages/cubes and those not working. I re-created the OLEDB source component several times, even
copied it over from a working package, and still have no success.
I even executed the statements in an XMLA sheet in Management Studio with the PropertyList taken from the trace, without seeing anything obvious in the result.
Any ideas what I could do to get this working?
Is there any reference explaining OLEDB error codes?
Thanks
Frank

Hi,
I finally got it working. Re-creating the connection manager solved the issue. There was no difference between the not working and the working connection in the Connection Manager Editor. When I compared on XML source level in the package, I found that the
working version contained Format=Tabular in the connection string, while the not working version did not contain this.
Frank

FPGA Code Generation fails with error codes 7 and -1

Hi all,
I have been having a weird issue with my LV FPGA compilation in the last couple of days, no matter what I try to compile LV fails to generate the FPGA code files and returns with errors 7 and -1 and complains that the file is not found. This happens no matter what I am trying to compile even a VI with just a while loop. I followed the discussion forum here without any luck, also followed the NI article here and that did not help either. The error codes always get generated at the start of the Generating Intermediate files step #7 (out of 7).
Attached to this post is a screenshot of the error I am getting (error -1 just says internal error and to contact NI support), bellow is basically the error I get for error code 7
An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error 7 occurred at Read from Text File in nirviGetInstantiation_cRIO-IDSel_Timer.vi->nirviGetInstantiation_cRIO-IDSel_Timer.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
C:\NIFPGA\compilation\cRioController_8-SlotFPGA_FPGA-TriggerTest_C06156E2\IDSel_Timer.vhd
I tried to do some digging to see what could possibly be happening, and I noticed that LV is looking for the vhdl files in the wrong folder (see the line highlighted in red above), when generating the vhdl files, LV will place them inside the "source_files" folder under the compilation project, but for some reason it is trying to find them under the root folder not inside the source_files folder!!!
Does anyone have any idea why LV would be looking for these files in the wrong subfolder?
Thank you,
Aws
Attachments:
Code Generation Errors.png ‏35 KB

Hi Aws_Khudhair,
What version of LabVIEW are you using? And what version of the FPGA module? From what I found, it seems as though this is primarily an issue with LabVIEW 8.6 and 8.6.1.
http://digital.ni.com/public.nsf/allkb/A711119FE89E39E78625754E00075E92
This forum also discusses a similar issue:
http://forums.ni.com/t5/Real-Time-Measurement-and/FPGA-compile-errors-after-generating-intemediate-f...
It may also be worth repairing/reinstalling the FPGA Module and the Xilinx compile tools.
Catherine B.
Applications Engineer
National Instruments

OPatch Error: OPatch failed with error code 73

Hi,
Trying to apply One-off patch for Base Bug : 5038791 on Linux 32 bit machine and getting below provided error code (My Maiden patching attempt using OPatch Utility).
OPatch failed with error code 73*
DB Details:
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Patch Details:
Name/Number: p5038791_10202_GENERIC
Base Bug : 5038791
[oracle@prashant2 OPatch]$ pwd
/u01/app/oracle/product/10.2.0/db_1/OPatch
[oracle@prashant2 OPatch]$ /u01/app/oracle/product/10.2.0/db_1/OPatch/opatch apply
Invoking OPatch 10.2.0.1.0
Oracle interim Patch Installer version 10.2.0.1.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0/db_1
Central Inventory : /u01/app/oracle/oraInventory
from : /u01/app/oracle/product/10.2.0/db_1/oraInst.loc
OPatch version : 10.2.0.1.0
OUI version : 10.2.0.1.0
OUI location : /u01/app/oracle/product/10.2.0/db_1/oui
Log file location : /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/opatch/opatch-30_Jul_05_00-06-34-GMT+05_Thu.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /u01/app/oracle/product/10.2.0/db_1/OPatch
Details = PatchObject constructor: Input file "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/actions" or "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/inventory" does not exist.
Apply Session failed: PatchObject constructor: Input file "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/actions" or "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
And this is what the OPatch Logs says:
SEVERE:OPatch invoked as follows: 'apply '
INFO:Starting ApplySession at Thu Jul 05 00:06:34 GMT+05:30 2012
INFO:Starting Apply Session at Thu Jul 05 00:06:34 GMT+05:30 2012
SEVERE:OUI-67075:Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /u01/app/oracle/product/10.2.0/db_1/OPatch
Details = PatchObject constructor: Input file "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/actions" or "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/inventory" does not exist.
SEVERE:OUI-67073:Apply Session failed: PatchObject constructor: Input file "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/actions" or "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/inventory" does not exist.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Thu Jul 05 00:06:34 GMT+05:30 2012
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Thu Jul 05 00:06:34 GMT+05:30 2012
INFO:Stack Description: java.lang.RuntimeException: PatchObject constructor: Input file "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/actions" or "/u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/inventory" does not exist.
INFO:StackTrace: oracle.opatch.PatchObject.<init>(PatchObject.java:1089)
INFO:StackTrace: oracle.opatch.PatchObjectUtil.loadPatch(PatchObjectUtil.java:996)
INFO:StackTrace: oracle.opatch.ApplySession.loadAndInitPatchObject(ApplySession.java:1076)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:4027)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:912)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:506)
According to the logs and the base error code it's failed to locate directories
_1. /u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/actions_
_2. /u01/app/oracle/product/10.2.0/db_1/OPatch/etc/config/inventory_
Not sure about these destinations highlighted by the patching Utility ...*
Your assistance will be highly appreciated.
Thanks
Prashant Dixit

You need to invoke OPatch from the directory where the patch has been unzipped, after making sure that the path to OPatch is included in the PATH variable. Pl re-read the patch install instructions in the README and follow them exactly
FAQ : Understanding OPatch Tool And Patching [ID 1451669.1]
HTH
Srini

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

[ForumFAQ]How to troubleshoot error "SSPI handshake failed with error code 0x80090324"

Understanding the problem:
When connect to SQL Server with Windows authentication, you may receive the following message in the SQL Server error log:
SSPI handshake failed with error code 0x80090324, state 14 while establishing a connection with integrated security; the connection has been closed.
Security Support Provider Interface (SSPI) is a set of Windows APIs that allows for delegation and mutual authentication over any generic data transport layer, such as TCP/IP sockets. SQL Server supports Kerberos indirectly through the Windows Security Support
Provider Interface (SSPI) when SQL Server is using Windows Authentication.
"SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos Authentication. There are many reason for SSPI Handshake error to appear in SQL Server error log.
Troubleshot the problem:
Download and install the Windows error code lookup tool Err.exe to view error descriptions for Windows Error Codes.
The error code 0x80090324 (SEC_E_TIME_SKEW) means "clock on client and server machines are skewed". In most case, this is a Kerberos issue. Kerberos is using a timestamp to protect against replay attacks. The maximum time skew that can be tolerated
between a ticket's timestamp and the current time at the KDC is 5 minutes by default.
Also check the Windows Event Log of client machine, domain controller and the SQL Server machine for existence of W32time error messages.
The solution:
Make sure the clock of client server, domain controller and the server running SQL Server are within five minutes of each other. Or Resynchronize the clock by run w32tm /resync on client machine and SQL Server machine.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

This error can happen due to Active Directory configuration issue or Network related issues. Assuming they are fine,
another reason could be related to fail Kerberos Authentication to connect to SQL Server.
In Windows 2003 and above, the default method of establishing a connection is Kerberos but if it fails, then connection may be established using NTLM. An error may be registered on SQL Server error log due to Kerberos failure.
To confirm if you have any database connection using Kerberos authentication, run this on your SQL Server
SELECT distinct auth_scheme FROM sys.dm_exec_connections
If you only see NTLM and SQL then, there is no Kerberos connection.
To use Kerberos, the client and SQL Server must be in the same domain or trusted domains and a Service Principal Name (SPN) must be registered with Active Directory for SQL Server service account.
You can check if the service account already has SPN, by running this on the SQL Server
setspn -l <domain\sqlserviceaccount>
If you don't see anything starting with MSSQLSvc\ then the account is not setup with SPN.
You can manually register SPN as a Domain Administrator using these commands.
To      create an SPN for the NetBIOS name of the SQL Server use the following      command:
setspn –A MSSQLSvc/<SQL Server computer name>:1433      <Domain\Account>
To      create an SPN for the FQDN of the SQL Server use the following command:
setspn      -A MSSQLSvc/<SQL Server FQDN>:1433 <Domain\Account>
If SQL Server service account is granted "Validated write to service principal name" privilege in Active Directory, SQL Server database engine will register itself when it starts and unregisters at shutdown. If you Domain Administrators do not permit this setting
then you should manually register the SPN and the SSPI error will go away.
Also the SQL Server service account must be granted "Account is trusted for delegation" privilege in Active Directory. If your SQL Server connects to other SQL Server using Linked Server then the server must also be granted "Trust this computer for delegation
to any service" privilege.
For a named instance, you can use the FQDN of the named instance instead of SQL Server FQDN and use the port number.
For a clustered server, you should use the FQDN of the SQL Server virtual name. In this case you will need two entries, one with port name and one without such as
setspn -A MSSQLSvc/<Virtual SQL Server FQDN> <Domain\Account>
setspn -A MSSQLSvc/<Virtual SQL Server FQDN>:1433 <Domain\Account>
Kerberos authentication works when SQL Server, Service Account and Windows account accessing the SQL Server are in same windows domain. If anyone these are in different domain, there must be bidirectional trust established between the domains, otherwise it
does not work.

CPU12.1.0.2.3 opatchauto failed with error code 255.

I am installing critical patch update 12.1.0.2.3 (15-APR-2015) for Grid Infrastructure standalone on Linux. It fails with the subject error code and the following additional messages:,
The user is root. OPatch cannot continue if the user is root.
opatchauto failed with error code 255.
The instructions specifically tell me to login as root before installing the patch, so what's up?
The instructions say to first upgrade OPatch to the latest, which I have done and verified.
Second, an OCM Response File is mandatory, so I followed the steps to create this file and saved it as /home/grid/ocm.rsp with default permissions 644.
Third, the instructions say to download the patch and unzip it to an empty location that cannot be /tmp. I created a new directory /home/grid/foo and unzipped the software to that location. So, the unzip location is /home/grid/foo/ and in that directory are only two things: a file named PatchSearch.xml and a directory named 20485724.
Fourth, the readme says the patch must be installed by a user with root privileges, so I have logged in as root. (Oracle Note 1591616.1 says you must login as root, not just be root like).
As root I have set environment variable for ORACLE_HOME pointing to the GI Home, and I set PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/OPatch.
Finally, I invoke opatchauto with the required parameters and it throws an error saying I cannot be root. I fussed with the parameters and the result is always I cannot be root.
From the documentation,
Case 3: Patching GI Home Alone
You should use the following instructions if you prefer to patch Oracle GI (Grid Infrastructure) home alone with this patch.
Case 3.1: Non-Shared GI Home
If the GI home is not shared then use the following instructions to patch the home.
Case 3.1.1: ACFS File System Is Not Configured
Follow these instructions in this section if the GI home is not shared and none of the Oracle database homes use ACFS file system for its software files.
Execute the following on each node of the cluster.
As root user execute:
# opatchauto apply <UNZIPPED_PATCH_LOCATION>/%BUGNO% -oh <GI_HOME> -ocmrf <ocm response file>
My command is,
opatchauto apply /home/grid/foo/20485724 -oh /u01/app/12.1.0.2/grid -ocmrf /home/grid/ocm.rsp
So, not a syntax problem. It simply won't let me run it as root despite that being a hard requirement.

Hello,
I tried with above command and faced the a different error . I tried applying patch 4487801.
ApplySession applying interim patch '4487801' to OH <Oracle_Home>
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
bleProduct" failed.
The details are:
OPatch found incompatible or invalid applicable product type with respect to the
Oracle Home.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 74
I doubt if some other patches to be applied before this one.if yes, then from where we can get the list of pre requite patches.
Please guide.

Flash Player Install failed with error code: 30

Hi, I want to report a problem with the Adobe Flash Player 13.0.0.182 (Mac OS X, English) installer on OS X 10.9.2. Mavericks. I'm posting this so the engineers will know what to fix in the next update version.
I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Symptom is the first installer downloads the 2nd, starts to launch it, then quits it with "Error: Unable to proceed with the installation" and a green (success?) checkmark. The GUI provides no other assistance except to "FINISH", which leads to the generic "Adobe Flash Player could not be installed." page.
The system log says: Adobe Flash Player Install Manager[22567]: Install failed with error code: 30.
The FlashPlayerInstallManager.log says:
2014-04-13 16:12:01 -0500 [I] IM: ---------- log start ----------
2014-04-13 16:12:01 -0500 [I] IM: All install checks pass
2014-04-13 16:12:01 -0500 [W] IM: Unexpected umask value for process: 0
2014-04-13 16:12:06 -0500 [I] IM: User does not have any processes that need to be closed.
2014-04-13 16:12:06 -0500 [I] IM: [install started]
2014-04-13 16:12:06 -0500 [E] RA: Unable to launch FPInstallHelper. Error = 'launch path not accessible'
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/FPInstallHelper':
    NSFileCreationDate = "2014-03-27 04:20:43 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileHFSCreatorCode = 0;
    NSFileHFSTypeCode = 0;
    NSFileModificationDate = "2014-03-27 04:20:43 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 2541;
    NSFileReferenceCount = 1;
    NSFileSize = 13348;
    NSFileSystemFileNumber = 4892044;
    NSFileSystemNumber = 16777224;
    NSFileType = NSFileTypeRegular;
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T':
    NSFileCreationDate = "2014-04-07 13:43:21 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileModificationDate = "2014-04-13 21:12:06 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 449;
    NSFileReferenceCount = 12;
    NSFileSize = 408;
    NSFileSystemFileNumber = 4552991;
    NSFileSystemNumber = 16777224;
    NSFileType = NSFileTypeDirectory;
2014-04-13 16:12:06 -0500 [E] IM: [install failed: 30]
2014-04-13 16:12:06 -0500 [E] IM: Install failed with error code: 30.
2014-04-13 16:12:06 -0500 [I] IM: ---------- log end ----------

I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Regardless... I still recommend "falling back" to 12 until they get this release right for everyone. I've read plenty of posts in the Apple forums from new iMac, Mini and MacBook users who've had nothing but trouble. Even the "gurus" there are linking to Chris Campbell's post here:
ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
Using the offline installer completely eliminates the errors seen with the stub installer.

Critical patch update fails with error code 73

RDBMS Version: 10.2.0.3
Operating System and Version: solaris 5.9
Error Number (if applicable): error code 73
Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
Product Version: 10.2.0.3
Critical patch update fails with errors(urgent)
UD00_102030>pwd
/mnt/base_install/downloads/10gR2/cpu/6394981
UD00_102030> opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0
Central Inventory : /u01/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /u01/app/oracle/product/10.2.0/oui
Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
This cpu oct 2007 patch for 10.2.0.3(for solaris)

That's great :) ...
Does anybody know which is the difference between
opatch napply
and
opatch apply ?
thanks,
P.

Request User State Store Fails with error code 0x00004005

I am trying to get a machine refresh working in SCCM and am running into a road block with the user state migration. The Task sequence hits Request user state store and then fails. In the logs on the machine it shows it downloads the cert from the SMP but it fails to verify the cert. The thing is that this was working and then stopped for no apparent reason. I have added a second SMP and it has the same issue so its got to be something environmental causing this. I have found no references to the errors I am recieving that relate to the issue so I am stumped. We have a SCCM 2007 site in mixed mode. The error log is:
The task sequence execution engine failed executing the action (Request User State Storage) in the group (Capture User Files and Settings) with the error code 16389 Action output: ployment\osdsmpclient\smpclient.cpp,1743) Request to SMP 'ATXFREPSMS01.NA.atxglobal.com' failed with error (Code 0x80090006). Trying next SMP. FALSE, HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1698) pClientRequestToSMP->Execute(migInfoFromMP.saSMPs), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2713) ExecuteCaptureRequestToSMP(migInfoFromMP), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2755) ExecuteCaptureRequest(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\main.cpp,72) OSDSMPClient finished: 0x00004005 Failed to verify certificate signature for 'ATXFREPSMS01.NA.atxglobal.com' (0x80090006) ClientKeyRequestToSMP failed (0x80090006). ClientRequestToSMP:oRequest failed. error = (0x80090006). Failed to find an SMP that can serve request after trying 4 attempts. ExecuteCaptureRequestSMP failed (0x80004005). ExecuteCaptureRequest failed (0x80004005).. The operating system reported error 16389:

Hi
I am getting the same issue.
More info:
The same task works ok for one client - an xp machine that was upgraded to vista sp1 using sccm but without usmt.
If I send this machine a task which includes usmt and os deploy it works.
On 2 other machines ( so far) , the request store fails with the same error - 0x80090006. (one of them existing vista and the other xp)
I have tried removing and adding the client from the domain but it did not help.
Any idea?
David

PSE12 download keeps failing with error codes DF006 and DF016. [was:Question]

Similar Messages

Maybe you are looking for