PSE12 install: Error 1335, Data1.cab corrupt

PSE12 install: Error 1335, Data1.cab corrupt
Install from online purchase with download, all remedies are relevant to CD-ROM?!
How do I get my money back?

great.  for others:
if you follow all 7 steps, you can download a trial via one of the links on this page using a browser that accepts cookies:  http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
and activate with your serial number.
if you have a download problem (eg, you see an error page or you are offered an incorrect version), you probably didn't follow all 7 steps.  typically, failure to meticulously follow steps 1,2 and/or 3 is the problem, but your browser must also allow cookies so that (a restrictive browser setting) is another potential source of problems.

Similar Messages

  • Error 1335 Data1.cab corrupt during CS6 installation of Acrobat X.  Any suggestions.

    Had to replace hard drive.  Downloaded CS6 Standard files from web site for installation.  Only Acrobat X did not install.  Any suggestions.

    Hi,
    Please try downloading the CS6 installer from following link and then check the issue:
    Download CS6 products
    Regards,
    Anoop

  • I am trying to download elements 5.0 onto my laptop that has windows seven. I get the message error 1335'data1.cab' missing. What can I do to get this to instal?

    I am trying to download elements 5.0 onto my laptop that has windows seven. I get the message error 1335'data1.cab' missing. What can I do to get this to instal?

    It looks like the CD is damaged.  You could try copying the entire CD on to your hard disk in a temporary folder and then launch the setup.exe file by double clicking on it.
    Can you do this?  Please post back.
    Whether 5 can run in Windows 7 is something I don't know.  You just have to try it.

  • How do I address error 1335, Data1.cab is corrupt, to install?

    I have Photoshop Premiere 8 and would like to install it on my new computer Windows 8. I receive error message 1335 during installation. I have downloaded Photoshop files 3 times, followed web instructions to try again and again (e.g. disabled start up files and services files, deleted old copies, re-started, etc.).  Actually I have had this problem ever since I bought Version 8 but did not use it as I did not need it (managed with easier programs). Now I need it and still cannot install it. Program was bought online from Adobe.

    Adobe Photoshop Elements 8 fails to install. Premiere Elements 8 loaded as expected.

  • Error 1335 'itunes.cab' is corrupt.

    I can't finish the install of the new version of iTunes because of an error 1335. I tried downloading the install package a second time to see if maybe there was just a problem during the download, but no dice. Any ideas?
    --d

    Exactly the same problem. error 1335 iTunes.cab is corrupted.
    Solution: uninstall Quicktime and delete all the iTunes files that iTunes uninstaller fails to delete.
    1. Control Panel -> Add/remove programs -> Quicktime -> uninstall
    2. Rt click on START and select "Search...". Search for "iTunes". (include advanced: hidden and system files). Delete every file found except the Library ones and the folders.
    3. Shutdown / Restart
    4. Download iTunes 6 again. and Install.
    I also downloaded an update to Windows Installer from the microsoft site again, as there was a problem with the version from SP2.
    Good luck

  • Itunes Error Internal Error 2356.Data1.Cab

    Hello everyone. I keep on getting this error everytime i try to install itunes. The error is Internal Error 2356.Data1.Cab. I have no idea on how to fix it and hope someone can help me. Thanks
    Emachines T2642   Windows XP  

    let's try getting an itunes 7 installer log to the Apple Engineers for that one.
    1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
    2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
    3. Type in a space, then the following line:
    /l*v C:\log.txt
    4. Hit return.
    5. The installer will create a log file:
    C:\log.txt
    Find that file and send it as an attachment to this email address.
    in the email to Roy, be sure to include the following information:
    - A link to the thread on Apple Discussions where the issue is being discussed
    - The username you are using in the thread
    - The version of iTunes you are using or trying to use
    - the version of Windows you are using (mention service packs)
    - A concise description of the issue you are seeing
    - The exact text of the error message you are seeing

  • Error 1335.The cabinet file 'Data1.cab' corrupt

    Acrobat Professional Design Failed. Could be network error, or problem with the package. Acrobat Professional Install Failed.
    I don't know what to do.
    I have uninstalled and re-installed the entire package and it is not working.
    Windows 7, 62 bit

    HI WatershedCenter,
    Please try the following link and advise if you were able to install the products or not.
    Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows
    Cheers,
    Kartikay Sharma

  • Trouble installing Elements 12, message "cabinet file Data1.cab corrupt"

    What can be done to complete installation after receiving the corrupt file message?
    [email protected]

    Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows

  • Error 1335 iPod.cab is corrupt

    When trying to install iTunes 6, I get the following error:
    iTunes Error: Error 1335. The cabinet file 'iPod.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
    Abort, Retry, Ignore
    I've attempted to download this installer mulitple times. I even tried downloading it from a seperate NIC since I saw one guy had an nvidia firewall issue. I am attempting to install it from my desktop folder and I'm also on the administrator profile on this PC. I'm running WinXP SP2. No firewalls up.
    I've tried the Microsoft Cleanup utility, but itunes nor quicktime were listed. I've deleted all reg keys associated with apple. My system is totally void of all Apple related installations.
    I tried to install the iPod software seperately and succeeded. If I hit retry a few times, the progress bar goes all the way across before I have to hit ignore. I then get a white x with a red circle saying Internal Error 2350. The installation rolls back and another message comes up.
    Error: -1603 Fatal error during installation.
    Consult Windows installer help (msi.chm) or MSDN for more information.
    I'm at a loss.

    I finally figured it out. All those temp directories in the other posts don't get down to the solutions.
    First, I have a built in nvidia firewall on one of my nics. I switched nics and redownloaded the itunes installer. I then went to the properties of the installer.
    If you look at the comments of the installer, you may see something like this:
    Setup=iTunesSetup.exe
    Silent=2
    Path=.\%windir%\Downloaded Installations\{872653C6-5DDC-488B-B7C2-CF9E4D9335E5}
    Overwrite=2
    So, I went to my c:\windows\downloaded installations\ folder and deleted that folder that started with 872..
    Since I did that, the installer went through like nothing else.
    iTunes is now working and installing successfully. I hope this helps for anyone else.

  • Acrobat 10 data1.cab corrupt

    Adobe Acrobat ver. 10.0.3
    Windows 7 Enterprise (64-bit) OS
    English
    I have been trying to update to Acrobat 10.1, but the update keeps failing with the following message:
    Error 1334. The file 'ia32.ppi' cannot be installed because the file cannot be found in cabinet file 'PCW_CAB_ACRO1010'. This could indicate a network error, an error reading from the CD-ROM or a problem with this package.
    I thought repairing the installation might help, but that also failed with a similar error:
    Error 1334.The file 'zy______.pfm' cannot be installed because the file cannot be found in cabinet file 'Data 1.cab'. This could indicate a network error, an error reading from the CD-ROM or a problem with this package.
    After seeing a similar question in http://forums.adobe.com/message/3740605, I tried to follow the instructions to create a new AIP by doing the following:
    1. msiexec /a <path of AcroPro.msi for 10.0> TARGETDIR <path where you want to create AIP>
    2. cd to the AIP folder
    3. msiexec /a <AcroPro.msi> /p <path of .msp file (AcrobatUpd1010.msp)>
    But at step #1, I get the following error message:
    Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
    What would be the best way to resolve this problem and apply the Acrobat 10.1 update?
    Thanks for any help you can offer.
    -David

    Thanks for taking the time to reply.
    I don't have Carbonite installed on my machine, so that isn't the cause of my particular issue.
    I decided to try what seemed most straightforward: simply copying data1.cab from my Acrobat X installation media and replacing the file on my machine. This seems to have worked and enabled me to apply the 10.1 update without error.
    I have no idea what could have caused data1.cab to become corrupt.

  • Acrobat 8 Standard - Data1.cab Corrupt

    I've been trying to get Acrobat 8 Standard installed on my Vista desktop.  At first, I was having problem with the PDF writer print driver, but in trying to resolve that, I have developed another problem.  I uninstalled Acrobat, and was trying to re-install it, but have had the installation interrupted each time I've tried, apparently because the Data1.cab is corrupt.  I tried making a copy of the CD, but got the same results.  I then tried copying the entire contents to my C: drive, then running the setup app, with the same results.
    It's odd that I'm experiencing this problem now, since I had previously installed it on this desktop with mostly successful results (other than the print driver issue).
    Can anyone offer any suggestions on how to resolve this issue?
    Thanks,
    Todd

    Quick update on this.  I tried once more to install Acrobat, and this time it seemed to work.  The app itself seems to work ok, as far as I can tell, but I'm back to my original problem of the print driver not working.  I have another posting for this problem, so I'll switch over to that posting.

  • Installation of Blackberry Desktop Software fails: Data1.cab corrupted

    Hi,
    I got some trouble to setup BlackBerry Desktop on my PC. I've tried to download and setup the software three times, but there is always the same message: Data1.cab seems to be corrupted. I tried to unzip the file manually, without success...
    Does someone have an idea ?... 
    Thank you in advance.  

    SDR wrote:
    Xandrex, I am having the same problem (along with a few others).  I hate to sound like a novice, but how do I decompress into a folder other than temp?  Whether installing from the website, or saving to my desktop and then installing, it unzips without giving me a choice of where to put the files.
    Hello,
    I don't have the install at home so my answer will be approximate. when you get the .exe file, it is in fact a zip file with a small launcher that knows it has to unzip the stuff in your temp file.
    What you need is a decompression tool to decompress without that launcher. You can install 7Zip that is quite good for those things.
    You can also try WinZIP or winRAR or winACE but those are not free-of-charge.
     http://www.7-zip.org/
    Once you have installed this tool, just open 7Zip and browse to the .exe file. click on it, there should be a button "Extract". Choose a folder (somewhere on your Desktop for example) and wait for the decompression to finish.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • When attempting to install Acrobat IX i get the following error "Error 1335" "pcw-cab-acr 11007" saying the file is corrupt.  What causes this error and how do I fix it?

    Has anyone else found this error?

    I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed.  It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4).  Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html   The previous version works beautifully.

  • Error 1305: Data1.cab

    When I was updating my Adobe Reader to 9.3, it got to 99.9 then I got a message saying that I had to "Verify that the file exists and that you can access it."
    Well, it was in a folder on my desktop where it was supposed to be, I opened the cabinet file and everything looked fine.
    So after clicking retry about 10 times, I finally clicked cancel. It looked like it worked, everything continued fine my IE (Eww...Fire Fox ftw!) opened showing the thank you page. So then it started doing other things and I waited and now I have the error again and I'm curious as to whether I should hit retry another 20 times, or hit cancel and hope for the best.
    Any help with my prediciment would be greatly appreciated.
    Sincerely,
    -Danny.

    It appears there is problems with your installation files.  Please review Error 1305 when you try to install an Adobe product (Windows) - http://helpx.adobe.com/creative-suite/kb/error-1305-try-install-product-1.html.

  • Internal error 2356 Data1.cab

    I have search the net and not found an answer to this I have done everything I have found and still I can not install itunes on my window xp I am getting ready to return the ipod and get something else already

    Try logging in as the user titled "Administrator", not just a user with administrator privileges. Sometimes Windows errors when a user just has admin privileges, but will work with the actual Administrator user.

Maybe you are looking for