PSE13 slide show theme array

Any suggestions on how to do the following in PSE13 - slide show theme Array
     > How to modify the duration of each slide?
     > How to 'customize' the presentation of each slide (eg weather it is a single shot per slide or multiple shots per slide)?
     > How to adjust the shot size to display the entire picture (In PSE11 - slide show the shots were fine - nothing cut off or cropped, however when the same shot appears in PSE13 slide show the tops of the shots are being cut off)?

The Slide Show Editor was completely rewritten in PSE 13. Adobe was forced to do this because the legacy code that the SS Editor was using through PSE 12 was difficult to maintain.
Unfortunately the capabilities of the PSE 13, are very limited. What you see is what you get. I suspect that now that they have the foundation code in place we will see it enhanced in future releases.
In the meantime, I would keep PSE 11 around and use the Export command of PSE 13's Organizer to copy the images, import them into PSE 11 and make your slide show there.
Personally, I have found that the PSE 13 Classic theme works best for me. Otherwise I make my slide shows with other programs.

Similar Messages

IPhoto 11 crashes when slide show theme is selected

My iPhoto 11 on Lion freezes when slide show theme button is selected. Anyone else experience this?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

How can I move my 31K photos to a standalone drive in folders and then import them back to edit and then perhaps return them to iphoto and library to produce slide shows

I want to move my photos into folders, which reflect the contents of iphoto events , to a standalone hard drive. Subsequently I intend to return them a few at a time to edit in Elements. Once they are edited I may return groups to iphoto to organize into slide shows. As things stand now, my iMac drive is rapidly filling up. I do not use raw files so I want to move Jpegs and edit them.
David

I'm with Léonie. That's a very (and unnecessarily) complicated plan you have there. As Léonie says you can just set Elements as an external editor.
To move a Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

How do I get my DVD slide shows to display files in the order I load them rather than random present

How do I get slide shows created on DVD to show slides in the order I load them rather than randomly?

Try this article:
<http://help.adobe.com/en_US/elementsorganizer/using/WS8346320B-3F64-46f6-AE4B-9FF4D934DB36 _WIN.html>
It is for PSE11 Windows only and it has a section for reordering under Section 5.

Are .mov files usable in PE 13? If not, can PE 13 convert them to a usable format? Will the result be usable in a slide show created with Photoshop Elements 13?

Are .mov files usable in PE 13? If not, can PE 13 convert them to a usable format? Will the result be usable in a slide show created with Photoshop Elements 13?

jayarl
Please do not duplicate thread. It gets confusing for you as well as for those trying to respond to your question.
I have replied to your question in your other thread.
https://forums.adobe.com/thread/1662961
Please continue the discussions there.
A moderator will probably delete or close one of the duplicates as soon as seen.
Just a note...Photoshop Elements 13 and Premiere Elements 13 are standalone products. Each comes with the
Elements Organizer 13. When both are on the same computer, they share the same Elements Organizer 13.
ATR

Can you have more than one theme in a slide show?

I am creating a slide show for my parent's 50th wedding anniversary but do not want to use the same theme throughout the slideshow. I have not been able to figure out how to change themes after a series of pictures. Is there a way to do this?

Chop the project into several different slideshows with different themes, export them as quicktime movies, and reassemble them in imovie.

Slide show reflections theme suddenly renders incorrectly

Recently I mentioned a strange appearance of a slide show I've made with the reflections theme. The mirror image at the bottom of the screen is suddenly appearing as solid instead of transparant. This only happens with a screen with one ore two pictures. With 4 pictures it shows up normally. I checked the photos and I tried using other photos, still not working. Exporting the slide show still shows this deficiency. Maybe a problem with the latest version of iPhoto 9.4.3?
Is there anyone who can reproduce this? Any solution?

As a first fix attempt Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Slide show only plays Theme Music

Using iPhoto 9.5.1 and Mavericks 10.9.4
I made a new slide show and after selecting it and clicking on Music, I have clicked the check box for Play Music during Slideshow.
Theme music plays perfectly. I can see my iTunes library and select music, but when I select my own music and hit Choose, it either (1) stays on themed music or (2) is silent. In fact once it is silent, I have to change the Theme in order to get even the Themed music to play.
I would REALLY appreciate some help with this. It is very frustrating!
Dave

Try choosing the "Custom Playlist' option and drag the audio track into it. See if that will link that audio track to the slideshow.
Is this a slideshow from an album or from the slideshow mode?

I am running Windows 7. I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order). I can not see any recent remarks regarding how to keep them from being loaded in date order.

I am running Windows 7. I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order). I can not see any recent remarks regarding how to keep them from being loaded in date order

By default the photos will be sorted by the date modified.
iOS: Understanding photo sorting
Edit (touch) them in the order you want them to be shown.

Adding a theme to the beginning of a slide show

I created a slideshow in IPHOTO and sent it to IDVD+6. I picked out the theme "kids showtime" and tried to add it to the beginning of the slide show. It has one drop zone. I put one photo in the zone. When I preview-the theme plays over and over. I want it to play once and then have the slide show start. Any help would be appreciated.

Any theme that has motion and music will repeat. No way to stop it after one cycle. And there's no way to automatically start the slideshow, unless you put it in the Autoplay well in Map... I don't think you want to do that.

Help! I thought I was pretty good setting up slide shows and adding music. I'm trying to make a new slide show from a great trip to New York. I can get theme music but no music at all from iTunes. Checking my older slide shows, which did play music!

Help! I thought I was pretty good setting up slide shows and adding music. I'm trying to make a new slide show from a great trip to New York. I can get theme music but no music at all from iTunes. Checking my older slide shows, which did play music, it's all gone!
Problem seems to have started after updating to Mavericks.
Is there a box I need to check/uncheck?
Any help very welcome!

Hopefully you've seen the post from Terence Devlin? I've pasted it below.
In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Pity Apple didn't either warn us or set up a bug fix!

Burning slide show using scrapbook theme to DVD for viewing on TV using DVD

Made a slideshow using scrapbook theme with songs in iPhoto '09. Clicked on burn disk, after disk was complete tried to play in DVD player on a TV and it won't work.
Can anyone tell me how I can keep the scrapbook theme and burn it to a DVD for viewing on TV using a normal DVD player? We want to be able to just put in DVD player and it auto start into the slide show if possible (if not then a button to start slide show). I know you can go into iDVD and burn a slide show with music but it looses the scrapbook theme of random photo's and cluster photo's that we like when viewed in iPhoto.

I also need to solve this problem. I plan to try to export the slideshow to a Quicktime (.mov) and a MPEG4. I think MPEG4 may be recognized by most DVD players. The Quicktime (.mov) should be able to work with an iDVD project.

In adobe muse when we have more thumbnail in slide show how can scroll them?

In adobe muse when we have more thumbnail in slide show how can scroll them?

Hi,
Can you please be a little more specific regarding your issue? perhaps a screenshot explaining what you are trying to do using muse would be really helpful .
Regards,
Rohit Nair

I want to make a copy of slide show create from my own photographs and with a an audio track behind them. I have carefully followed the iDVD tutorials and burnt the result to a disc but image quality is very poor. What is wrong?

I want to make a DVD of a slide-show with an audio track behind the photographs. I have carefully followed the iDVD video tutorials but the result is far from satisfactory. The quality of the images on the resulting DVD are blurred and indistict although the original photographs are of a very high quality. Where am I going wrong? Would I have better results from a different program than the inbuilt iDVD and if so so what programs have others found to be better? I should be grateful for some expert guidance.

Hey Falcopebo,
Thanks for using Apple Support Communities.
Looks like you have image quality issues when using iDVD to burn.
iDVD 7.0: Burned DVD has interlacing, pixelation, or image quality issues
http://support.apple.com/kb/ht4078
A standard DVD made by iDVD is made to the standard DVD resolution of 720 X 480, which is smaller than most HDTVs and monitors. When expanded to fit the entire screen or monitor, the image will distort slightly due to upscaling to fit the screen or monitor.
Have a nice day,
Mario

IPhoto's Slide Show allows for only one song !

I love the feature of iPhoto's slide show for a user to accompany a slide show with music from one's iTunes library. However, you can only pick one song. That means that if you have a slide show longer than one songs worth of time (most slide shows will be this way), the song will just keep repeating.
Sure would be nice if there was a way to either play mutiple songs from a user's iTunes playlist. Alternatively, I've heard that the a capability may exist (outside of iTunes) to concatenate multiple songs together to accomplish the same end.
Any suggestions on how to do either of the above?

Hey Baheno,,
there's so many Roads that lead to Rome!
Road #1
You can consolidate 2or more songs together in iTunes and name that (2 in 1) big song, Say, "eye of the tiger 2in 1) so this way it will be easy to locate it in the iTunes library while searching through iPhoto. Else you can create a separate albums in iTunes, and you put there only songs that are combined together.
Road #2
This is the one I prefer. You can export your slide show to QT (Quicktime). it requires some calculation to create a slide show that ends with the end of 1 song. Then you create another QT slide show, that ends with another songs.... etc..... after you merge all the parts together and you have a very long slide show with many songs!
Transitions:
Keep in mind that exporting to quicktime uses only the desolve transition. Which is fine with me. I have seen so many people doing some power point presentation and slide show with photos and using a array of different transitions..... in the same slide show.....it is disturbing, and takes away from viewing pictures. In cinema, it is said: "the thecniques should remain invisible" so keep the disolve transition... it is the least obtrusive .... your viewers, will never complain that there was no "cube effects"! Only you know about the missing effects!
Self contained file.
When you export to QT, you now have a file that you can send people through e-mail (given that it is a reasonable size) or you can even post them on web page! like a .mac page.
When you want to view the show, you just click on the file and play it. No need to start iPhoto. No need to have a MAC, it can be seen on a PC too with QT. You can put it on a CD or DVD, and can be viewed on a DVD player.
But when you play your slide show directly from iPhoto, you have to be in front of your mac, you have to have iPhoto open! But you can have you mac connected to a TV in the living room (I do) and then can play the slide show from iPhoto, using a TV-VGA adaptor that will play on your living room TV for a larger crowd to see. It can also be played through the sound system!!!! infinity and beyond!!
If you want more specific on how to export to QT and merge 2,3,4,5 files post back. I will get more into it.
I always export to QT, because this way, in the future, you do not have to mess around again in selecting the photos needed, and selecting the songs in iPhoto. I just click the QT file, and it will always play the same!
hope this helps!
Michel

PSE13 slide show theme array

Similar Messages

Maybe you are looking for