PSE5 on Win 7: newly installed .8bf files not appearing in Filters menu [was: Good Day,]

Good Day,
I am running PSE5 under Windows 7 64-bit, I have tried numerous times to get newly installed 8bf files to show up in the program under filters, but this never happens. The additional filters such as Flaming Pear 'Flood' were correctly copied to the plug-ins folder. Any help anyone?
Friendly regards,
Dieter

After you download the flood filter from flaming pear, you unzipped (extracted) the flood-164.zip and then copied the flood-164 folder to
C:\Program Files (x86)\Adobe\Photoshop Elements 5.0\Plug-Ins

Similar Messages

Application installed but does not appear in main menu

after i uninstalled facebook application with my i pod touch and try to reinstall it, application store said it was installed but icon does not appear in main menu.please hel.tnks

Did you try to use the search function "spotlight" to find the app on your device? Go to your main screen and swipe once more to the right to open spotlight and search for it.
Also try to reset the ipod by holding the sleep and home button until the Apple logo comes back again, or reset your Home Screen by going to Settings/General/Reset ->Reset Home Screen

Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?

Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?

the cc desktop app is used to install and update cc programs (and a few other thinigs). but that does not include 'opening' the installed programs.
click your start button or your program files directory to find the acrobat executable to launch acrobat (and any of your other apps, adobe or otherwise).

After updating My iPad 2 to iOS 5.1.1 , my newly installed apps are not working.

After updating My iPad 2 to iOS 5.1.1 , my newly installed apps are not working . When I try to open the app the screen just flashes and then nothing happens. Built in apps works fine . Please help

I realize that installing apps is not the problem. Installing another app from the app store is a recommended troubleshooting tip from Apple if all of the third party apps will not open. It resets your iTunes authorization when you install the app because you have to enter your password.
If you didn't install another app try it. Read this support article as well.
iOS: Troubleshooting applications purchased for the App Store
Try this as well. Quit all apps, reset the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad.
Go back to Settings>Store>Sign in and then see if the apps will launch.

When itunes is installed missing file -45075 appears, any suggestions

When itunes is installed missing file -45075 appears, any suggestions

Me too.
I have looked at 2-3 other posts, and they still fail to resolve this.
I have reinstalled iTunes; I have repaired every other Apple component and ......
Same message every time.
I am running fully updated Windows 8 (not 8.1 yet though)
Looking at the number of posts in this discussion group, it does appear to be something that Apple could take a more proactive lead on. Either a more meaningful error message, or ideally a fully loaded iTunes installation.
COME ON GUYS - help us out here.
If it wasn't that I NEED iTunes to manage and backup my phone, I'd uninstall the %^$*&^ lot. That said, my 4G upgrade to the iPhone 5S is now in serious doubt ... maybe a time for a complete change.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

I buy extension from adobe online, i installed it correctly but then the extension menu was greyed out and i can't click it. Some help please.

I buy extension from adobe online, i installed it correctly but then the extension menu was greyed out and i can't click it. Some help please.

hello ptbruce, you probably only selected to open (not save) the video which will download it into windows temporary folder where it gets deleted again after it has been used. <br>you could try to right-click the entry in the firefox download manager and copy the link of the source file and try if you can download it through this url again. otherwise you'll have to contact the vendor of the video to find a solution...

HT2513 In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal

In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal?

If you're running Mountain Lion (10.8.3), reminders is now a separate app. Launch reminders from your applications group and you will be able to access File>New Reminder.

FTP publishing on iWeb to replace existing site - files not appearing.

On iWeb, I used FTP publishing to replace my existing site files, then deleted the original files but not only has the new site files not appeared in my public html folder but I get the message:The requested URL /www.geofflevitus.com was not found on this server.
Additionally, a 404 Not Founderror was encountered while trying to use an ErrorDocument to handle the request.

but I get the message:The requested URL /www.geofflevitus.com was not found on this server.
That's an indication that the index.html file that is created alongside the site folder by iWeb is missing.
Try publishing your site to a folder on your hard driive and use a 3rd part ftp client like the free Cyberduck to upload the site folder and the index.html file.
Cyberduck or Transmit will let you view your server folder in a Finder like window where you can see which files are missing.
OT

Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is down loading at the app store and when complete, I can not open it or reinstall it. Help Please o,

Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is downloading at the app store and when complete, I can not open it or reinstall it. Has happened on the last 4 free apps. Help Please

Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.

Is there a way to open powerpc installer in Mavericks to just install library files (not run power pc app)?

Hello, I was looking to install some files from a power pc program. However, I have osx x mavericks. I know the deal, since snow leopard apple swicthed to intel processors. I was wondering since I only need to install files and not install and run a powerpc app ,is there any way I can get the installer open to grab these files that I need? I just need the files, not to run the program, there has to be a way around this without having to run a program like paralells or to run a dual boot with leopard on another drive?
I'm trying to run a music plug in instrument program in Logic and I have everything installed except for the actual sound libraries wich need to be installed off this power pc installer. I went to the companies website and downloaded and installed all of the latest updates. I then ran a report which is telling me that I just need to install the missing library files (on the powere pc installation). Which I find confusing since I thought the whole point of the update i nstall was a way around that? Any help would be appreciated, thanks for your time.
Mike

MikeThomasmusic wrote:
...there has to be a way around this without having to run a program like paralells or to run a dual boot with leopard on another drive?
In my experience advising Logic users, depending upon the version of Logic and the model Mac you are using, if your Mac will boot from Snow Leopard, you can install Logic and all of its plug-ins in Snow Leopard and then upgrade to Mavericks.

Newly installed Cap 8 not capturing mouse clicks

Newly installed Captivate 8 is not capturing my mouse clicks. Captivate is set to Training & I have my regular settings selected. I have also worked with the application I am trying to capture before and did not experience any issues. Thoughts?

Hi there,
Please tell which Operating system is it?
If it is Windows, then have you installed the 32 bit version or 64 bit of Captivate?
Again, if it is Windows please try to run it as admin, by right clicking the Captivate launch icon.
Thanks.

RSC Files Not Appearing in RH Project Manager

My three-writer group has experienced a number of RoboHelp/RoboSource Control problems in the last week.
First this is our setup:
1. Two writers with 64-bit Windows 7, and one with 32-bit Win 7. We all have the latest patches and updates.
2. Our RSC database is on a remote machine that has 32-bit Win XP.
After a time where our group successfully updated our project, I was given a new laptop with Win 7 (I had previously had a 32-bit Win XP desktop), we have now encountered the following problems:
1. No one can open a RH project from version control. We go through all steps and when we open the XPJ icon it finally crashes after taskbar status messages of something like "Querying version control." It thus crashes at one of the final steps in opening a project from the database.
2. Even on our remote machine, I cannot open a RH project from version control.
3. For some unknown period of time, it appears that the three of us have not had our changes uploading to the database because nobody's desktop RH project looks the same. Out of the three of us, I have many--but not all--of my changes up at RSC. I have no idea where my colleagues' changes went.
4. An unspecified number of files are listed in RSC as well in the File Status pod in RH but they are NOT appearing in the Project Manager pod. If I try to move one image file with the same name into a folder where the original should be, RH displays an error message saying that it already exists there--even though I cannot see it in Project Manager nor interface with it.
I have used RH for 11 years but RSC for just 1-2. I have never seen behavior like this before and it's really brought our entire OLH efforts to a halt. Can anyone tell me what I might do to restore, if not the database, a version of the XPJ that has as many of our changes that DID make it to RSC?
Thank You,
Chris
Varian Medical Systems

I have amended the title of the thread for the simple reason that I don't do source control. I guess you've just added another reason why.
Sorry but I cannot help you on this one.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

File Place does not appear on my menu. Neither does Tools Photoshop Image processor.

In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all. I have reset the preferences numerous times and am good to go until I shut down my computer. When I reboot they are gone again. I have a Mac with OS 10.10.2 (Yosemite) and CC.

Mardi Carter wrote:
I shut down using "Shut Down" under the Apple menu.....always…
Well, that's fine for the OS, but sometimes not so great for Photoshop. Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
Forget about "it had never happened before", Yosemite is a work in progress. Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5. That has proven to be the nature of the beast.

File not appeared in Application server

hello gurus
iam new to SAP
Iam doing excersice MD (Attributes ,text,hierarchies) loading through PROCESS CHAIN, while iam loading data by infopackage under schedule tab i had given file name which is saved in Application server,but in preview it shows File not found (for text) and hierarchy also same problem,so pls clear my thread any one....!

Hi,
Check the proper authorizations are there or not?. in SU53. Check you are opening structure file or Data File?. Ask Basis team to check the file from backend using command promt, give path and ask them. You create your own Folder in AL11 and try to save the files in that folder only because it is easy to track and maintenance.
Thanks
Reddy

PSE5 on Win 7: newly installed .8bf files not appearing in Filters menu [was: Good Day,]

Similar Messages

Maybe you are looking for