PSE6.0 organizer import CR2 files results in 'no preview'

When I import Canon CR2 files from my camera using the PSE Organizer (Windows "import with PSE6") I often get no RAW preview/thumbnails; a thumbnail is created for some of the imported RAW pictures but most of them not. When I have opened the picture (camera raw 5.3 start by double click, and close) in most cases a thumbnail is created and displayed. This shouldn't be necessary, I suppose ????
Does someone know this bug and how to fix it?

So, now I have to buy PSE 7? Isn't there a cheap(er) upgrade possibility? After all, it is a bug in PSE6. PSE7 costs almost as much as a 'new' / first install version, isn't it.
I would love to have the latest version, mostly not for the new features but mainly for bug fixes and/or performance enhancements.
Date: Sun, 6 Sep 2009 09:30:40 -0600
From: [email protected]
To: [email protected]
Subject: PSE6.0 organizer import CR2 files results in 'no preview'
The bug was fixed in PSE 7 (one of the few PSE 6 bugs that were).
>

Similar Messages

I am trying to import CR2 files from my canon 450D. Lightroom 5 won't let me. Help please!!

I am trying to import CR2 files from my canon 450D into Lightroom 5. Lightroom says 'preview unavailable for this file'. I cannot get past this. I have tried importing directly from the camera, and also from an external hard drive that I managed to download the photos onto. I am new to Lightroom so any simple suggestions would be greatly appreciated!! Also I am working on a Mac. Thanks!

I have a 450D and the files open just fine in LR5.
Is this your first attempt at using LR or your first attempt at developing CR2 files?
It sounds like your raw files may be corrupted or there is some permission problem that is preventing LR from reading the files.
Can you upload one of these unrecognized files to http://www.dropbox.com/ and post a public download link to it, for others to test?
Also try copying just one CR2 file to your internal drive and see if that imports, in case there is some problem with the permissions on the external drive. Just use Finder to copy the file, not LR, in case that is an issue.

Importing *.CR2 files to Lightroom 3.6 - support of Canon EOS 70D

Hi,
try to import *.CR2 files from my new camera Canon EOS 70D to Lightroom 3.6, but it is not supporting format. What to do? Can anyone help me. Thanks a lot for your answers, yours Petr.

The DNG files are mainly supported by Adobe software. The CR2 files would be for any software that knows how to deal with 70D raw files and so the right answer for you depends on whether you feel you’ll want to use the raw data in other software or not, and what you feel you want decades from now if Adobe or Canon no longer exist. Personally, I’d just upgrade to LR 5.2 and not worry about DNGs, but I also already have compatible hardware so am not hit by having to upgrade my OS or hardware.

Lightroom 5.4 not importing cr2 files over a network?

Well, this is unfortunate.
Brand new iMac, just out of the box, OS updated.
Brand new Adobe CC subscription, everything updated.
Neither Lightroom 5.4 or Photoshop CC can import CR2 files stored on my NAS.
The Mac connects to the NAS just fine. I can see the photos and copy them to my new PC, but can't import.
I know LR doesn't allow storing CATALOGS on a network, but I've never had problems with the original raw files stored there.
Any advice?

Solved it!
I'm not sure why it makes a difference, but once I mounted the network folder and gave it an alias on the desktop, LR5.4 was able to import.
Here are the steps:
http://osxdaily.com/2010/09/20/map-a-network-drive-on-a-mac/

Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Urgent please
anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Sounds like the folder Write permissions issue described here with a solution:
"Some import operations were not performed" from camera import

LR4.3 does not show previously imported CR2 files (5D mark III) by trial version

LR4.3 does not show previously imported CR2 files taken using 5D mark III by trial version.
When tried to synchronize the files not show when browsing, the import window comes up. All the Jpeg files, Raw files are seen in the window. None of them are highlighted nor selectable. LR is assuming that those files are already imported but if imported they are being shown for browsing or editing

Maybe you have set a Filter in LR. Press Ctrl-L once or twice to turn it off.
Maybe you don't have "All Photographs" selected in the Catalog Panel on the left.

Install LR3 with LionOSX- not importing CR2 files

When LR3 is installed, it will not import my CR2 files. tried an un-install and still no results. when i install LR3.5 on laptop (without Lion) everything works fine. what is going on?

Does LR 3 support your camera? Are you hooking the camera to the computer or using a card reader? What type of error or failure are you getting?
Some detail would be helpful.

HELP!!! I Can't Import .CR2 Files In Lr4?!?!

I have a Canon Digital Rebel T3 and everytime since yesterday I tried to import images it tells me it can't read file *****.CR2. I Am fairly new to photography but would like to know what a .CR2 file is and how suddenly I'm getting them and it won't let me import them. Did I accidentally change a setting in Lr4?
Any help is appreciated.
Thanks!

I have just got LR4 and the same thing happened to me after I chose a new directory to import them to, just refused to import them. I am importing Canon 5D2 CR2 raw files. However, when I used the default 'my pictures' it worked. Not good when you want to specify a folder for your images. Have you had any more insights into this?

Can't import Cr2 files from my Canon 60D into LR5

I took a trip to New Zealand and I shot in Raw +low res jpeg. I uploaded the files to my little Asus tablet I had purchased right before my trip because I was running out of SD cards. This is the only place I have quite a few images as I formatted the cards to reuse them. I have transferred them to an external hard drive with no problem and then to my main PC which has LR5. It doesn't seem to 'see them' when I try to import. Any ideas? I tried opening one of the images directly into Photoshop CS6 and then I saved it as a jpeg file - then I was able to import it into LR, but I have 100's of photos and not sure I can do a bunch at a time, but at least all is not lost. Thanks for any help anyone can offer.

When you say "grayed out" do you mean a gray area instead of a thumbnail as can happen when the monitor profile is bad or do you mean the thumbnail is dim and washed out to indicate an image that cannot be selected as they would be if they had already been imported into the catalog?
You talk about shooting RAW+(low-res)JPG but no where to you talk about what happened to those JPGs. Did the JPGs remain on the tablet when you transferred things to the external hard drive prior to attempting to import or are they on the external hard-drive, too? Are you importing them along with the raw files, but have Treat RAW+JPG as separate files unchecked, so the JPGs have become the sidecar file to the CR2s? The size of the companion JPGs shouldn't matter as far as what happens with the CR2 files when you work with them. They take up space on the card and the tablet memory but I guess you wanted them so you could review your pictures on the tablet since the CR2 files are not processable on the tablet so wouldn't be visible.
Have you imported your camera's raw files into LR before? What is different this time from previous times, the source of the files, or the fact the files were on a tablet, or that there were companion JPGs, or the type of import is different because you usually import direct from the card? What type of import did you do, Add, because the files are supposed to stay on the external drive as the normal place for your images, or Move (or Copy) because the photos end up on an internal drive, normally?
When you open the JPGs in Photoshop, do they first open in Camera Raw or do you not see the ACR plug-in and they open straight in Photoshop?
When you say the saved JPGs out of Photoshop are 1/5th the size, do you mean pixel-dimensions size where a normal 4000x3000 image becomes 800x600, or that the file-on-disk size is of the CR2 files is 25MB but the JPG is only 5MB on disk? Images don't just become smaller in pixel dimensions without a resize happening, and it is perfectly normal for a JPG file to be much smaller on disk than the original raw file, since JPG files use lossy compression.
The imprecision of terms "grayed out" and "size" is confusing to me. I worry that somehow you don't have any CR2 files, only small JPGs, or that the CR2 files became corrupted because they were put on the tablet since you've never done that before. Can you provide an example CR2 file, uploading to www.dropbox.com and post a public download link, here--a file that you don't mind others seeing, just so it can be checked for corruption?

How to import CR2 files with XMP files?

I'm using LR 1.4.1 on a Vista platform (with service pack 1). Last week my OS got corrupted and I had to reinstall everything.
So I'm trying to get my catalog back into LR but am having a lot of trouble. When I try to open LR using the latest backup of the catalog, it only opens certain files. All others show up as a grey preview.
Frustrated at this not working, I decided to just import the CR2 files from my external HD. Problem with this is that it's not bringing in ANY of the develop settings. So all of my edits are gone. This is going to cost me hours and hours and days of time to redo.
I have several clients waiting on orders, galleries, etc and I'm at my wit's end on how to fix all this! Can anyone help me?
Thanks,
Annie

> All others show up as a grey preview
Do you mean grey boxes as thumbnails or are images grey in loupe or develop module? If it's grey thumbnails, then it's because there are no preview files generated. Generating standard previews (or 1:1 previes) should fix it. If Develop module shows images as grey then I have no idea.

Why am I unable to import CR2 files into Lightroom ?

When I try to import a CR2 file I receive a response that the files are not recognized by the raw format support in Lightroom.
I have downloaded the latest version.
I'm using a Canon 7D Mark II

Click on help and at the bottom of the context menu you should see:
About Adobe Photoshop Lightroom 5.7.1
That is the latest version.
Otherwise, if you installed through a Creative Cloud subscription launch CC desktop and install the latest version of Lightroom from there.
If you have a stand-alone purchased version of LR5 go to:
Help >> Check for Updates
Install 5.7.1

Raw import .cr2 files with Canon SX1

Hello !
Should Aperture be abble to import .cr2 raw files ?
If so , why can'nt I do it with my new SX1 from Canon ?
Thanks
Marcel Jacques

In the meantime try Adobe Digital Negative Converter (DNG converter): http://www.adobe.com/products/dng/ not positive it will be compatible with the SX1 CR2, but Aperture will read the converted DNG. The concept is that although these proprietary formats may come and go, the DNG format is here to stay for Decades to come. +worth a shot+!

Can't import CR2 Files

Hi - I just started working with RAW files on my Canon Rebel and am having a hard time importing to Lightroom 5. I did go to preferences and check the box to treat RAW as separate photos. I imported several photos from iPhoto and both the JPG and RAW files appeared (actually that was a hassle because most of the CR2's weren't checked so I had to find them and some of the JPG's appeared twice). After I completed my editing I went back to my original pics in iPhoto and wanted to import a few more. I tried to drag the jpg and cr2 file into Lightroom and 2 photos import but they are both jpg - one is 545 JPG and the other is 545-2 JPG. I can't get the CR2 to import which is what I really want. Does anyone have any ideas?
Thanks so much!

That is why you’re getting duplicates JPGs because iPhoto only presents a JPG for raw files to outside programs.
To get CR2s from iPhoto into LR you’ll need to export them from iPhoto. I’m a PC user so I can’t tell you what to do from personal experience but Adobe has a help page detailing a process:
http://helpx.adobe.com/lightroom/help/import-iphoto.html
Otherwise Google for something like (importing raw files from iphoto to lightroom)

CS3 Photoshop Will Not Import .CR2 Files

I have tried countless updates and cannot seem to get Photoshop to import RAW files (.CR2) into the system. I receive the error message, "Could not complete your request because Photoshop does not recognize this file type"
I am trying to import using the Merge HDR function on CS3 Photoshop, but it does not even do anything when I click OK on the three RAW pictures i have selected.
Help please. I am using a Canon Rebel T1i
Thanks
lhfarrow

Photoshop CS3 doesn't have support for that camera. You'll either need to upgrade to CS5 or use the free DNG Converter to convert the raw files to DNG files that can be opened with CS3.

Problem Importing CR2 Files in Aperture 1.5.6

I recently shot a number of pictures at my sister's wedding using my Canon Digital Rebel XTi. I am now trying to import the RAW files into Aperture (ver. 1.5.6). Aperture will recognize the compact flash card and display the files on the card. When I try to import the files, however, Aperture seems to go through the process of importing the files (the little timer dial runs etc.) but at the end of the import process the pictures do not appear in my project. What could be the problem? I am able to copy the files onto a folder on my desktop but Aperture will not import these files even from that folder. Help!

gah hey im having this problem too
and it all worked last week <?>
formatted flash drive on camera.
downloaded photos from a file reader via flash drive.
camera = canon mk3ds eos
can see previews in apeture (2.1.2) but large image on browser is unsupported.
error message "unsupported image format".
have tried downloading them again and importing them again etc.
both straight into apeture and via hard drive folder.
but it worked last week?
bit upset i love aperture and my new camera now nothing is working well
for info i loaded up canon photo professional which is canons own brand image processor (which is a bit rubbish imho) and the images worked on that.
they will not import to photoshop (an old version)

PSE6.0 organizer import CR2 files results in 'no preview'

Similar Messages

Maybe you are looking for