PSE6 - Can I sync Organizer to Windows Explorer?

Is there a way to sync Organizer up to certain folders in Windows Explorer? I want any changes I make to files on my hard drive (additions, deletions, moves, etc.) to show up automatically in Organizer. For example, whenever I delete a photo or folder from my computer, a dead thumbnail/folder still shows up in Organizer that I have to manually remove.
Thanks in advance!
Johnny

Johnny,
The overall idea is to perform any and all changes from within Organizer.
And no, the Organizer will not recognize changes made in Windows, however,
Windows does see everything that was done with Organizer.
Juergen

Similar Messages

  • I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

    I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as  I have associated .pdf files with adobe reader. My operating system is windows 7.
    When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'.  I have not changed my security settings (Tools, Internet Options, security).

    Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • HT1386 I have a bradford syncing cart can i sync with a Windows computer with itunes or do i need a mac

    I have a bradford syncing cart can i sync with a Windows computer with itunes or do i need a mac

    Apparently you need a Mac. See specs @ http://apple.bretford.com/products/powersynccartforipad
     Cheers, Tom

  • User cannot access redirected Documents folder, but can connect to share in Windows Explorer and access folder on server

    I am in the final stages of a cross-forest migration.  Users have Windows 7 workstations with redirected folders on a Windows Server 2012 box running in the old forest.  User accounts were not migrated.  The accounts in use have always
    been in the "new" forest.  One of our challenges was the large volume of data in redirected folders.  I made sure users in the target forest had continued to have access to their redirected folders in the old forest and robocopied
    the entire users share, copying the permissions with the files.  By doing incremental robocopies, we can get a final copy done now in about six hours.  The plan was simple: copy the files, do an incremental copy every night, on the night of the cutover
    change the folder redirection policy Documents path from
    \\oldserver\users\%USERNAME% to
    \\newserver\users\%USERNAME%. The policy is configured to NOT copy user files from the existing folder to the new redirected folder.  Everything was going well until I tested the policy change.  After the folder redirection policy is updated
    and applied, the user cannot access the private Documents folder.  For example, user Chester Tester logs on as ctester.  I open Windows Explorer and click the Documents shortcut.  I see one subfolder, which is subfolder of Public Documents. 
    So I can look at Public Documents but when I click on the Documents folder (Under the Documents library link) I get an access denied error.  Now for the kicker, if I open another Windows Explorer window and edit the address bar to
    \\newserver\users\ctester, I can navigate the Documents folder tree and see my thousands of documents. What the ....?
    I'm hoping this is something really simple to fix!
    TIA

    HI Vivian,
    Thank you for your reply.  Yes, the path in Group Policy Folder Redirection Root Path was updated to
    \\NEWSERVER\users.  I had planned to point this to the distributed file system, so the first used was actually
    \\domain\dfs\users.  To simplify things I have backed off to copying to just a normal share
    \\newserver\users. 
    We are using BASIC folder redirection and we create a folder for each user under the root path. 
    We did not want the policy to move content, as we were seeing users requiring 15-20 minute logon times  (or higher) after the policy is changed.
    Grant the User exclusive right to Documents - Disabled
    Move the contents of Documents to the new location - Disabled
    Related folder settings
    Video - Follow Documents
    Music - Follow Documents
    Pictures - Follow Documents
    Now when I change the folder redirection from old server to new server I now have TWO My Documents folders in the user's redirection folder on the server.  The redirected Documents points to an empty folder set.  The copied folders with all user
    data are there, but folder redirection refuses to recognize the original folder.
    I am looking at the full view of the folder, nothing hidden, so I'm wondering how a folder can have two subfolders with the exact same name.  For now, I just want the redirection to move from the old server to the new server properly.  I deleted
    the new My Documents folder, rebooted the user's workstation and tried again.  The behavior repeats itself, i.e., a new My Documents folder is always created when the redirection policy is changed from the old server to the new server.  The environment
    has about 1500 users with approximately 1.3TB of data in the redirected Documents folders.  OUCH!

  • Can't View JPEGs in Windows Explore Because of QuickTime Picture Viewer

    A couple of weeks ago I had some film developed in our local drug store. I had the photos put on a CD. The CD came with its own software and you had to install the software in order to view or take off the photos. I wanted to use my own editing software program to edit my photos so I copied the photos to a folder on my HD. Imagine my surprise when I discovered that all my JPEG files had been turned into QuickTime Picture files. Not just the ones that I took off the CD, but every JPEG file on my hard drive--over a 1000! I did what you usually do whenever you want to change an association for a file in WD 98--I right clicked on a JPEG file and chose the option that said always open these type files with ACDSee, the photo editing program I wanted to use for my photos. All this did was to allow me to open all my JPEG files into my favorite photo editing program, but still would not allow me to view my JPEGs in the Windows Preview pane on the left of my screen in Windows Explorer! When you have as many JPEGs as I do, even if they are all organized and labeled, you still need to be able to view the thumbnails in Windows Explorer so that you won't have to open up every photo to see what it looks like. There is no way you can remember what every photo looks like when you have that many files even with them all labeled. I went in to the Preference option in Quick Time and unchecked every thing that had to do with still photos. But it did not help. I right clicked on every folder and checked the option that says View Thumbnails. I went into the Folder Options in Windows Explorer and tried every folder option that was offered and none of it solved the problem. I have searched the knowledge base on MS web site and could not find an answer. I have posted this problem in numerous Tech bulletins and no one can figure out how to solve this problem. I checked my Program's list and I also noticed that I had something there listed right under Quick Time that said "Quick Time for Windows" and don't remember ever seeing that before and don't know if that has anything to do with my problem or not. My Quick Time version is: 6.5.2. The "Quick Time for Windows" is not listed in my ADD/REMOVE program. I am so totally frustrated after working on this problem for 2 weeks, almost 8 hours a day, that I am about to uninstall Quick Time just to see if that will solve this problem. I would hate to do that, and that is why I joined this forum before I perform such a drastic measure. I figured that since this forum is all about Quick Time, someone here will know the answer. I have to leave the house for a little while but will check back here when I get back home and see if anyone has posted here. Thank you in advance for any help that you offer.
    Sheila
    PC Windows 98 Pent lll, 500--RAM 256-Firefox-AVG
      Windows 98   Pent lll, 500--RAM 256

    Well, it seem no one here knows the answer to my problem either. I appreciate all the people who have looked at my problem even though they did not know the answer either. Because no one on the Internet seems to know how to solve this problem, then I am going to have my husband reformat my hard drive and then I know for sure the problem will go away.
    I probably should do that anyway since I have never had to reformat my hard drive since I got it 8 years ago. I always said if something is not broke, why fix it and now it finally seems to be "broke", so I might as well clean it up as well as fix it. Thanks to everyone who looked at my problem.
    Sheila

  • Can't Sync my iPhone4 Windows XP

    Can't Sync - iPhone4 - Windows XP - iTunes version 10.4.1.10
    1st AppleMobileDevice seems to run and run and uses up all my CPU capability.
    When I connect and get iTunes to recognize my iPhone4, it starts the Sync process..
    "Backing Up"  (step 1 of 4)   but ....
    it seems to just run forever in this mode, and never backs up .  sometimes iTunes stops working and just sits there.
    The problem has been getting worse since iTunes 10.2
    I have no other programs running, just iTunes.
    Basically I can no longer Sync my iPhone4, can't add new APPS, or rearrange the ones that are already on it.
    Someone Please HELP !!!
    Thanks!   Doug

    Hi Doug.  I had the same problem so took my iPhone to Apple Store for Genius appt.  Whilst there, it synced perfectly - the chap thought it might be my wifi settings at home interfering with iTunes.  So when I got home I disabled wifi signal and hey presto - it synced fine!  Hope this works for you.

  • When going to the official site, covering the Hoover Dam bypass bridge, I cannot bring up the site camera to view construction activities but I can do this successfully with Windows Explorer 8, following the instructions by clicking on the appropriate ic

    When I attempt to view the construction of the new Hoover Dam bypass bridge, to do so, you must click on the icon (while holding down the CTRL key) on the site camera to bring the camera up. This will not work with my latest version of Firefox but I can do this with Microsoft's Windows Explorer 8.
    == This happened ==
    Every time Firefox opened
    == After Firefox recently installed

    Works for me on Firefox 3.6.6 - hold Ctrl and click on the Web Cam icon on the left side of this page - http://www.hooverdambypass.org/ - then hold Ctrl and click on the '''Click Here''' hyperlink in the popup window.
    It crashed Firefox once for me, but after I re-opened Firefox it worked fine for 5 minutes as I tried the panning control and viewed both the Nevada and Arizona side cameras. The non-Java view worked for me too.

  • Can see my file in Windows explorer but not in DW

    There's gotta be an easy fix for this one...  I have a .jpg that I copied over into the file structure of my local site.  I know it's there, I can open it from Windows explorer.  But DW doesn't see it!  I tried just closing and relaunching DW and rebuilding the cache... what am I missing?  It just doesn't show up in the DW file list!
    Thanks,
    mathnun

    OOPS!  As you might have guessed I was looking in the wrong place... WAMP instead of XAMPP, I have a duplicate file system and saved my .jpgs to the old one. 

  • Can you sync music from windows windows media

    I synced music from windows media player onto my ipod nano. Windows media says it's all downloded but none of the songs show up on my ipod. Why is that? Can you not sync music from windows media player even though windows media player lets you?

    Hi,
    You probably have your nano's disk-use enabled. This enables you to use your iPod as an external disk. Windows Media Player does sync music, but it only transfer it to the iPod as normal data file you put into it, which iPod Nano will not show the songs in the player, but if you access the iPod from My Computer, you might able to see the files.
    Meanwhile, iPod only read and understands files that synced into it by using iTunes. The songs are renamed and put into the iPod filesystem hiddenly. If the above information contains errors, please correct me.
    Regards,
    Siau.

  • Can't sync music from Windows PC to iPad Retina

    I've a newly purchased iPad Retina. Unfortunately I can't sync music from my Windows PC to iPad. I tried with the best practice, muisc appears with a cloud circle at the left most column in the device shown in the iTune. I'm puzzled as I'm an user of iPod and have never faced such problem earlier.

    The cloud symbol means your music is in the cloud-not on the PC.
    Download the music onto the PC,

  • Can't sync iPad to windows xp on hp, HELP!!!

    This may be long and I apologize. I am new to all iPod, iPad products. Ihave an hp with windowsxp for home use. I downloaded iTunes to my pc, then connected the iPad to my computer. Nothing happened. When I go into iTunes I can find sync iPod, but it is not in active mode,so I can not do anything. I have deleted Itunes and re-downloaded it and still have nothing happening. I can use iTunes on my pc and on my iPad,but just can't sync them. I want to transfer my music from my pc. HELP!!!

    What's not showing up? The iPad or the File>Transfer Purchases part? If you can't see the iPad and you are running iTunes 11 you can go to View>Show Sidebar in the iTunes menu in order to see the sidebar and your iPad should appear under the devices heading there.
    You can right click on the iPad name and select Transfer Purchases from there as well. Or in iTunes 11 you can go to File>Devices>Transfer Purchases from the menu at the top of the screen.
    This might be helpful as well.
    Syncing to a "New" Computer.
    https://discussions.apple.com/docs/DOC-3141

  • Can't sync iPod on Windows "Can't find file" message

    This is my umpteenth problem with iTunes since getting Vista. Can't resist sharing that.
    Problem: I sync my iPod (bought it two years ago; audio and video, it downloads some of my music, shows the progress on the "bar", then it gets stuck on one song, will sit there for five minutes trying to download and then gives me the error message "Can't sync iPod. Can't find the necessary file" or words to that effect. I try ejecting my iPod and while my iTunes goes back to normal, my I have to wait for my iPod to run out of power before it returns to normal.
    I uninstalled iTunes and downloaded it again and got the same result. However, the newly downloaded iTunes still kept my old play lists so maybe it was not completely downloaded even though it disappeared from my computer.
    Any help would be greatly appreciated.
    Thanks.

    . when i plugged my ipod shuffle g1 in a few days ago itunes said the i had to restore my ipod. i did not want to but i had no choice cauz it already deleted my songs. after 5 trys it said "cant restore ipod"ipod". unknown error occurred (1418))(itunes did it by it self, i just put it in one very fateful afternoon. i spent 5 hrs on the computer and i still cant fix it) well i went to this web site to see if they could help me. i found something. it was a program for my ipod but by the time i downloaded it, it was too late. after a while plugging in my ipod "my computer" no longer reconized it as removable disk. a pop up comes up and says this device malfunctioned then my ipod disappears off the face of the earth. i would send it to the apple store but my warranty expired. bummer what should i do?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!umm i dont think anything can work towards our problem

  • Can't sync tunes from windows to my iPhone, can't even drag and drop.  Very frustrating!  Any ideas?

    I can't sync my music or ringtones from my iTunes account to my iPhone.  I can't even drag and drop songs! Won't let me update apps, without purchasing them again!  Very frustrating!  Help!

    I add the keyword 'sync' to any photos I want added to the iPhone/iPad.
    Then, during the regular process of syncing the iPhone/iPad with my computer (mac), the photos with that keyword would be copied onto the iPhone, iPad.
    I've been doing it this way ever since I was shown how to; ie after I got my iPhone 2 years ago. And every time the process worked - until the last few weeks. Suddenly it doesn't do it any more.
    I believe I have upgraded software (either iTunes or iPhoto or both) during this period. I try to keep my software updated but have noticed previously that the new version often is disappointing.
    I've not tended to use Smart albums much.
    MM

  • Can't Sync with ITunes (Windows 7)

    So I recently bought a new computer with Windows 7.
    I installed the latest Itunes and everything seemed fine.
    However, when I tried to sync my Iphone, it literally syncs for less than 10 seconds (no sync).
    Is there a reason for this?
    Is there a patch?
    I have tried to reinstall Itunes several times now, but nothing.
    My iphone is recognized, but can't seem to sync.
    Anyone know how to fix this problem?

    See also "OutlookSyncClient.exe crashes silently - Outlook 2003 with exchange account" - might be the same behavior...

  • Can't sync photos using Windows 7, 64 bit

    I just got the iPad. Am using a PC with Windows 7, 64 bit. When I try to sync selected photo folders, sync begins, but never ends. I have to manually stop the sync, and none of the photos are copied. If I try to sync the iPad without photos, it works.

    ronsir wrote:
    There are only 4 photos in the file and they are quite small. How long should the sync take? I quit after about 5 minutes. Does it take longer?
    I sync'ed about 400 the first time and they took about 5 minutes. Yours should be pretty fast. I watched the status bar at the top count through the photos as they optimized...
    Try 4 different photos. Maybe one of the photos can't be optimized. (or whatever is done to them)

Maybe you are looking for

  • Freight charges borne by business.

    Freight charges borne by the business not by the customer in some  segments .. How to configure in sap sd pricing    ? Rehards/lijo

  • Apply SP1 to SQL 2012 clustered on a Windows 2012 failover cluster

    For earlier versions of clustering there was an ability to prevent a resource from failing to a particular node. I used this when service packing clusters to ensure that no SQL instances would attempt to fail back to the node I was patching. That abi

  • Duplication of groups in Contacts

    I have approx 15 Groups in my Contacts. Total real contacts are approximately 470. My Mac has duplicated all of these groups, some with up to 8 copies, but not all the copies contain the same contacts (or number of contacts). So, I have some 2000 to

  • LE - WM  Storge unit management.

    Hi Experts, i am trying  to create TO with storage unit management active but not able to create TO i did all setting in warehouse number i activated the sumagment active chech box and in defination of storage type also i activated the su chech box a

  • H.264 is outputting stretched and low res.

    Dear Compressor mavens, Help me if you can. My issue is this, a month ago I used compressor to take an uncompressed 1280 by 720 HD QuickTime movie output from FCP and make it into a hinted webcast QuickTime at high resolution and it worked great. I u