PSE6 crashes when using Clone Stamp tool

Hi! I'm new to PSE and have a standard install of 6.0 - no addons. I've been using the editor for just a couple of days now, but I have experience with other graphic editors.
I've just started using the Clone Stamp tool. I've cut out a background from a photo, put it into a new file using New>From Clipboard, and am using the Clone Stamp tool to paint background over the edges of the cut.
So, start Photoshop in edit mode, open picture (.psd created above), select clone stamp tool, right-click and select 100 pixel brush from default palette, place brush some way away from the edge and Alt-click to set "From" point, then move the brush next to edge, click, and start painting over the edge. All OK. Now, move the brush to the right-edge of the picture and start painting so the edge of the brush goes outside the picture a little. This is where it crashes for me. It may be that it's actually the from area that is outside the picture that causes the problem.
Does anyone else get this problem?
Now I'm going back to try again taking great care along the right-hand edge to try and stop it crashing!
Alan

Hi Alan,
is it still crashing for you? I tried the same steps and works fine for me. Are you working on Windows/Mac?

Similar Messages

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium

Hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

Good day!
What kind of Layer is selected, is the Layer locked, …?
Could you please post a screenshot with the pertinent Panels (Layers, Channels, Options Bar, …) visible?
Regards,
Pfaffenbichler

A problem using clone stamp tool

Hi guys,
I use After Effects CC last version on a pc under windows 7 ultimate..
This problem must be simple to solve but I just don't see how.
I have an aerial view of the Vesuvio. The volcano makes a 10 to 15° circular motion due to the helicopter moving.
I need to eliminate the actual houses and other trails on the border of the crater to have my volcano as it was 2000 years ago when it erupted and destroyed Pompeii.
I succeeded to do that with the clone stamp tool without a problem and it takes of course into account all the different shades of earth on the cliffs of the volcano.
But when I preview the shot, while the volcano moves, I can see the stamped touches of paint moving as if floating above the volcano. The older surface is not visible as I wanted but the new one does't follow the movement. I'm sure I forgot to do something but what? Should I do the clone stamp in conjunction with motion tracker, if so how? I tried once but got the same problem.
Thanks in advance
Claude

OK, I see a bunch of painting on the nearest slope of the volcano that does not track with the shot. Your biggest problem is workflow using the clone stamp. You are just not using it properly. If it were me, the first think I would do is to use the After Effects tracker to stabilize this part of the volcano so that it didn't move in the frame.
Now you only have perspective issues to deal with.
Next I would duplicate the stabilized layer, pre-compose the duplicate moving all attributes to the new composition, name the preComp - clone or paint pre-comp, then open the pre-comp in the layer panel and use the clone stamp to repair the parts of the image you want to repair. You can then add other trackers for the parts of the image you want to clone or use a time offset to make your painted layer match the mountain.
I probably would do something completely different. I'd export the middle frame of this move as a Photoshop file, then go in and paint the mountain the way I wanted it to look. I'd mask the background in photoshop so I only see the sides and face of the volcano. Then I'd bring my painted mountain back into AE and animate distortion, scale and rotation so the painted layer matches the original perspective on the shot as close as possible. When that is done I'd go back to my main comp, add a null, tie the null's position to the anchor point of the stabilized footage, then parent the original copy of the footage and the painted copy to the null to put the camera movement back in the scene.
Here's a tutorial on how to apply tracking data to a clone stamp in AE:
Removing an Object with Clone Stamp - After Effects Tutorial
I am pretty convinced that you added the smoke... Use the same procedure to get the smoke to look right. It's also floating in an unnatural manner. You could also replace the far background with a matte painting of the city using the same mask, duplicate, paint in Photoshop, then distort and remove the stabilization.

PPro CC crashes when using Track Select tool

This is probaby the most bizzare bug i have encountered so far - everythig works - i can scub, play and adjust footage, apply effects, titles and time remapping, but when i select Treack Select tool and click on the timeline, Premiere Pro crashes.
This is a new develpment as well - i was able to use PPro CC just fine since i installed it (trial version), until yesterday.
No new applications or updates for Windows, Nvidia card or Adobe were installed lately, but all drivers are up to date (according to various update managers)
Premiere CS6 works fine with the same sequence (mixed RED and DSLR footage)
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe Premiere Pro.exe
Application Version:    7.0.0.342
Application Timestamp:    5176598d
Fault Module Name:    ntdll.dll
Fault Module Version:    6.1.7601.17725
Fault Module Timestamp:    4ec4aa8e
Exception Code:    c0000005
Exception Offset:    0000000000052fc6
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    1ce0
Additional Information 2:    1ce04770b02f823ff20b7f82076eba51
Additional Information 3:    c192
Additional Information 4:    c19212ee5e1e8407cb093e848f6cb5d8
System specs:
Creative Suite CS6 subscription
Creative Cloud trial
Windows 7 x64, SP1
Nvidia Quadro 4000 GPU
i7-3039k CPU
32Gb of RAM
thank you

Yep, buggy project..
New project with same and different footage works fine
Other project created in CC works fine
Imported sequence from CS6 works fine
Imported sequence from a buggy CC project into a new project causes crash on using Track Select tool
I was able to revert the project in question to CS6 via Final Cut Pro XML, also works fine (for now, at least), just have to redo some time remapping which didn't come through with XML translation, small loss
I guess i'll wait few more months before switching to PPro CC, maybe mysterious bugs will be worked out by then
Thank you for your replies!

Aperture crashes when using the Crop Tool

I have tried using Aperture in 32 and 64 bit modes. I have the same problem in both when using the Crop Tool. Immediately after I hit "RETURN" key to finalize the crop I have chosen, the VIEW screen goes blank and the SPINNING BEACH BALL appears. I go to the "Force Quit" dialog and Aperture is highlighted in red--signifying a crash (unresponsive application).
THIS is happening more frequently.
Help!!

I had a similar problem. I solved it with these instructions on my blog.
http://maximegousse.wordpress.com/2010/12/05/my-aperture-library-crash/
Max

Problem using clone stamp tool

I have a composition which I created from prem pro dynamic link. There is only one layer in my composition (a .mov clip) which I have removed an unwanted item from using the clone stamp tool however the item is still showing in my comp and therefore not updating in prem pro? Anyone help please?
Cheers,Alan

I wasn't using the current frame option, it was set to constant, however just to explain:-
I was using Prem pro and replaced a clip via the dynamic link to AfterEffects, the layer it automatically put in the composition was the actual .mov clip. This clip had an object I wanted to remove, which I did using the clone tool, however this did not replicate in the composition. I ended up creating a new composition and imported the same clip, carried out the same procedure and it worked OK?

Photoshop crashes when using Free Transform Tool

Hello All Forum Members,
Recently Photoshop CS6 crashes when I attempt to use the Free Transform Tool through the shortcut (Ctrl+T).
It also crashes very often when using any of the free transform/transform tools via the menu as well, though not as often as the previous listed situation.
This experience only occurred recently - for all the time I have been using CS6, this has never happened.
I have read another thread similar to this, though I don't think the cause of the problem is the same as this was only a recent experience.
Any help will be appreciated.
Many thanks in advance.
Jinky145

Hi Curt Y,
Thank you for the quick reply!
By immediately, do you mean when the loading or when the actual interface has finished loading?
I have tried both, but neither seems to have worked.
Is there a menu or someplace else I can reset preferences?
Many thanks!!!
JInky145

After Effects CS6 11.0.2 crashes when using the pen tool (Mac OS X 10.8.2)

I'm using After Effects CS6 11.0.2 on Mac OS X 10.8.2. Whenever I use the pen tool to add a vertex, the application crashes. I've submitted several crash reports to apple (they get sent to apple automatically when the app relaunches).
My specs:
iMac
21.5-inch, Mid 2010
Processor 3.06 GHz Intel Core i3
Memory 12 GB 1333 MHz DDR3
Graphics ATI Radeon HD 4670 256 MB
Software OS X 10.8.2 (12C60)
Anybody else having this problem or have a solution?

So I have discovered it only crashes when adding a vertex when I'm editing the max a few frames in. When I add vertices on the first frame of the comp I don't have any trouble. I've tried unchecking the box that says preserve constant vertex count, and it still happens.

Flash Pro CC crash when using pencil, brush tool

Hello,
I have bought the full CC package and installed Flash Pro CC today on my laptop (lenovo y50) and im getting crashes when i use the pencil and brush tool.
When i use the select tool the selection is not in the right place. program feels weird.
Im using lastest version
running windows 8.1
lastest flash and air and graphic drivers.
It just crashes doesn't even show a error just benggg stopped working.
Can anybody help me out?
Greatzz

solved
i was having the same problem and found the solution from Adobe.
you have to go to control panel - hardware and sound - display -
change the size of the text to the smaller one 100%
REstart the os and start adobe flash
i wish this will help

Computer crashing when using Spot Healing Tool ~ PSE9

Why does my computer "Crash" when I use the "Spot Healing" tool. While using the "Guided" edit for "Perfect Portait" every other tool works just fine, but when I go to do the "Spot Healing" it crashes. Weather I am in the "Guided" edit or to use it on it's own. This is my 1st attempt using PSE 9 and this feature. HELP!!

Try clicking on the drop down icon under the word file - then choose reset all tools.

Illustrator CC 2014.1.0 Consistently crashes when using the Curvature tool

I'm using the curvature tool to trace a simple JPEG. After a few minutes the program will crash.
Never had this issue with previous versions of Illustrator.
I am using OSX 10.7.5
Any ideas as to why this would happen?
Thanks

I cannot guarantee you my suggestions are warranted, or effective, and I am in no way associated with Adobe troubleshooting staff, but... you should check to make sure that there are no erroneous printer entries listed with your peripherals. In addition, if you have networking functions enabled on your printer, and it does not possess network capabilities or they're malfunctioning, I advise you resolve or remove them from the properties ASAP. I don't know why, but if there's a networking printer error, you'd best expect AI to follow suit.
If that does not do the trick, you can try removing the prefs file in your AI dir.

LR 3.5 'crashing' when using spot correction tool

I recently upgraded to Windows 7 (from XPx64) and have had to restart LR several times after using the spot correction tool. The circle verifying the correction doesn't appear, and my mouse cursor disappears anytime it is over the LR program window. Task manager indicates the program is running, but I can't operate the program. It also will not close from the start bar, and only closes from the task manager. Any other experience this?

Spot Tool slowness and lock up can be caused when the 'Lens Corrections' tool is used (i.e. Enable Profile Corrections or Manual tab settings applied). Try temporarily disabling the 'Lens Corrections' tools by turning OFF the small switch to the left of the 'Lens Correction' tab. This will disable all lens correction settings. Try using the Spot Tool again and see if that fixes the problem. If so this is the best solution for now, and once finished with the 'Spot Removal' tool you can flip the Lens Corrections' swicth back ON.

PSE6 crashes when using Clone Stamp tool

Similar Messages

Maybe you are looking for