PSE6 FLV Share - how to get thumbnails?

Hi,
I have tried all the available templates (that allow video) to publish for the web various video clips (FLV format).
Does anyone know how one can thumbnails to be visible on the album pages so one can select the relevant clip?
At present all one can do is advance through the clips on the player with no knowledge of what the clips are until they play.
Thanks,
Stewart

You gave NO details whatsoever. No wonder your post has rewmained unanswered this long.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

How to get thumbnails to show as the photo instead of a folder with date shot?

How do I get thumbnails to show as the photo instead of as a little folder with the date shot on it?

You gave NO details whatsoever. No wonder your post has rewmained unanswered this long.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Show and Share: How to add thumbnail for uploaded by URL

Hi all,
I upload video by URL in Show and Share. Can I manually add thumbnail for video? and how to?
Thank you very much.
Bintasan Mokkamakkul

As per docs, the default behavior for show and share is to assign a
thumbnail based on the length of the video:
Check out:
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
TABLE: Please match the # for each section:
If your video is ...
1. less than 3 seconds long
2. Between 3 and 8 seconds long
3. 8 seconds or longer
It uses this frame for the thumbnail...
1. 0 seconds
2. 4 seconds
3. 8 seconds
If you have a video that is longer than 8 seconds, but the title shot only lasts for 5 seconds, the automatically generated thumbnail may not contain your video title. Or, if you recorded a message, the system may have captured an unflattering facial expression for the thumbnail. Use this procedure to correct the situation.
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
The procedure to modify the thumbnail is listed in the link above. You
need to go to your uploaded videos and click "Edit Video" then follow
the instructions above to move the slider where you want the thumbnail
to be.
Please keep in mind that video editing is only possible for some video
formats:
Table 6-1 Video Format Editing Support
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1080725
I hope this helps!
Cheers!
T.

How to get thumbnail view in File-Open

When I go to File-Open I would like my directories to come up in thumbnail view right away, instead of having to click on the View icon and then on Thumbnails. Is there any way to make this view the default?
Thanks

On Tue, 22 Jan 2008 18:33:05 -0800, [email protected] wrote
in <[email protected]>:
>John, I changed my Windows default folder view to Thumbnails and
>rebooted, but PSE6 still opens with a list of files, not Thumbnails. Is
>there a step I haven't done?
No, I gave you bad advice -- relied on something I had heard without
checking it myself -- sorry. I've now done some checking, and there
doesn't appear to be any way to do what you want. What I do is open My
Pictures, which I've configured for Thumbnail View, and then drag and
drop into PSE.
Best regards,
John Navas
Check for answers to your questions at
http://help.adobe.com/en_US/PhotoshopElements/6.0/
Lots of useful help there,

How to get thumbnails to indicate whether JPEGs or Raw files?

In earlier versions of iPhoto I could look at a photo thumbnail and immediately tell whether it was a JPEG or a RAW file because the description below the thumbnail indicated such. With iPhoto version 9.2 the thumbnails do not include this information. Is there anyway I can cause this information to be displayed beneath the thumbnails? I shoot JPEG + RAW and would like to distinguish between JPEG and RAW files by merely looking at the thumbnails.
Bob

Try this from a different perspective:
Why are you shooting Raw?
In order to obtain the highest quality images my D700 is capable of producing.
When a camera takes a shot a Raw is generated, this Raw is processed by the camera into a Jpeg and that's goes onto your computer.
High end cameras allow you to step into that process. It stops the Jpeg being processed and allow you to bring the Raw data directly to your computer so that you can do the final step yourself: process and out put the Jpeg.
But the point of the exercise is to produce a Jpeg that can be used/shared/printed etc.
The point of shooting Raw is that you prefer the results when you process the Raw compared to what the camera does.
If you think the job the camera does is good, then don't shoot Raw.
If you think it's not, then shoot Raw and don't shoot Jpeg.
Shooting both makes little sense - excepting the scenario detailed in my para above.
On my iMac monitor I’m looking at the thumbnail of the last RAW file I processed. Since a RAW file is not even an image I presume that what I am actually seeing is the JPEG preview you referred to. Correct?
No. The thumbnail is different again. Usually, it's actually a thumb copied from the one created by the camera and stored in the Raw file.
To see the Preview drag the shot to the Desktop from the iPhoto Window - that's it. Open it in Preview and compare that with the Jpeg version from the camera - just visually, not file sizes etc. (I'll come to that later on.)
I do all of my editing in Photoshop Elements, so in order to convert this RAW file I right clicked on the thumbnail and selected “Edit in External Editor” whereupon the RAW file opened up in Adobe Camera Raw.
In the iPhoto Preferences -> Advanced, have you selected to 'Use Raw when using external editor' ? If not then you're not processing Raw at all, just the Jpeg preview.
Yes, I selected "Use RAW when using external editor."
That workflow is quite convoluted
Camera to iPhoto, iPhoto to ACR, ACR to Elements, Elements to Finder (tiff), Finder to iPhoto (Sharpening), iPhoto to Finder (Jpeg) and then Finder to iPhoto.
At the end of it you're left with the Raw, Camera Jpeg, iPhoto Preview, a tiff and a couple of Jpegs, right?
Only one JPEG.
That's too complex and worse, there is no connection between the Master Raw and the final Jpeg. They're not even linked in the iPhoto database. You can't revert from the Final Jpeg to the master Raw.
I can't think of a reason why I would I want to revert from the final JPEG to the master RAW. The master RAW is already available.
Even though my workflow gives me good results it is more complex than I would like it to be. Since acquiring my new iMac last January I have been seriously thinking about downloading Aperture 3 from the Apps Store for a mere $79 and using it to manage and edit my images. Presumably that would give me a less convoluted workflow. A big question will be what to do with all of the thousands of images I have stored in iPhoto--leave them where they are as referenced files or move them into Aperture where they will be managed files. My initial inclination is to leave them in iPhoto.
To use the iPhoto preview just... use it. If you import a Raw and then try do anything with it, email, upload, print etc then it's the Jpeg Preview that is used.
If you process the Raw in iPhoto then the Preview is regenerated incorporating the decisions you made.
If you export (File -> Export) you can use many settings to set the level of compression, size and so on of the resulting file.
Put it this way: I'd be 99% sure that the iPhoto preview will be good enough for sharing by email or online. It may also be perfectly good enough for printing too - but if it's not that's when you export to the quality you prefer.
This is good to know. Sometimes I just want to quickly e-mail a group of JPEGs without having to go through the process of generating JPEGs by processing the RAW files. I previously mentioned that by dragging the thumbnail labelled RAW to my desktop it becomes a JPEG which can then be dragged back into the iPhoto Library. If I'm shooting only RAW is that the best way to quickly obtain a JPEG? By the way, I just did this with one of my thumbnails labelled RAW. The size of the JPEG thereby obtained was 6.3 MB. This is larger than the size of the high quality camera-generated JPEG which is 5.8 MB. This would seem to indicate that the iPhoto-generated JPEGs are of high quality. In a side-buy-side comparison the two images looked very similar except for the iPhoto-generated JPEG being a little brighter than the camera-generated one.
So if I am understanding this situation correctly it appears that I can cease shooting JPEG +RAW and instead shoot only RAW. Then for best results I will process RAW files to produce highest quality JPEGs and for less demanding requirements and for quick responses I can use the iPhoto-generated JPEGs.
Question: Even though I have been shooting JPEG + RAW for a relatively short time I have managed to accumulate a goodly number of camera-generated JPEGs. How can I most readily delete these JPEGs without having to go through my iPhoto library and tediously deleting them one-by-one?
Regards
TD

How to get thumbnail image on caller id

How do I get a small picture in the upper right corner when a call comes in like in the tv ads instead of a full size pic? I have tried to upload a pic via mobile me and from the phone itself but still get the full pic?

If you have a Mac, you need to add the photo to the contact on the Mac first.
Remove the photo from the contact on the iPhone, then sync. The contact will now have the small photo like on the ads.

How to get thumbnail photos OFF of Ipod?

My computer crashed and unfortunately we did not have full res. photos saved to ipod but we did have the lower quality saved to it. Is there anyway to get them back on to my computer? I really appreciate any help. Thanks!

There are a few programs out there for recovering photos from an iPod, have a look at the ones below. If you search the internet you can find more. As you are aware, what you'll be recovering will be photos optimised for the iPod so they won't be the same quality as the original full resolution versions:
iPodPhotoCopy Windows only
CopyPodPhoto Windows only
Tansee iPod Transfer Photo Windows only
iPod Photo Liberator Mac & Windows
TouchCopy Mac and Windows Versions (iPhone and iPod Touch compatible)

How to get thumbnails ?

Hi,
I am new in photoshop plugin, and I would ask some question.
1) I have a automate plug-in, is it possibile retrieve thumbnails of the images in workspace ?
2) I would save an image as copy with icc embedded, I try listner plug-in, but there is no information about icc embedded key. Is it possible ?
Thanks for answer...

1) As explained in the SDK documentation: no, you can't do that from an automation plugin. Other plugin types can access the pixel data, and the automation plugin can work with them.
2) That depends on the type of plugin, but those that can use profiles have the profile data available to the plugin, as documented in the SDK.

Question: how to get the adobe plug in to play a downloaded flv file ?

I want to know how to get the flv adobe plug in which i downloaded as a result abc or nbc or cbs.com i forget exactly which said i had to and also it seems to be used for playing most all videos from web such as those from utube,hulu, etc. So my question is how do i get the plug in to play any downloaded *.flv video ? The particulars on the one i have is:
Output folder: C:\WINDOWS\system32\Macromed\Flash
Execute: "C:\WINDOWS\system32\Macromed\Flash\uninstall_plugin.exe"
Extract: NPSWF32.dll
Extract: NPSWF32_FlashUtil.exe
Extract: flashplayer.xpt
also perhaps FLVPlayer.swf of about 9Kb may have something to do with it?
And the latest update i have was about jan 13 when it seemed to automatically take over my system and update itself.x
I know it has the ability to do what i want- which is full screen cropped ,change aspect ratios etc. and seems
It has to be able to or else it could not play the files and give those options which it does on some videos like from utube etc. in the first place. Unfortuneately it has something also to do with the useless *.swf files which are apparently of no use to anything and could certainly be eliminated .
I have downloaded several freebie flv players such as bs player etc. etc. but they all have so many faults and are not suitable. Bs player does what i want but it hangs , have to go to system mgr. to get out of it sometimes , often difficult to use etc.etc. The main features is i need is to be able to make and play playlists to automatically in full screen one after the other in a specified order with NO user intervention and the ability to magnify or 'pan in' i guess they call it and change aspect ratios so that i can have full screen as if just cropping part of horizontal such as if want to view a 16/9 aspect ratio on a computer as i have with the prior standard 4/3 aspect and change a downloaded vertically stretched to a cropped instead etc.
Also it doesn't make sense to download others and take up disk space when already have the adobe - also adobe seems to be the only one that plays hulu flv's correctly - on other flv players the video and audio are way out of sync and not just by few seconds but often by a minute or more. I know there is another 'pain' way to do it which is create a *.avi or other extension with loss of clarity etc. which have done but would like to be able to just do it in real time while playing the flv file itself as for example
as bs player does.
Anyway if there is no way to get adobe to do this does anyone know of any other free flv player downloads which will do what
i want - basically playlists, magnify , pan,crop and still full screen, change aspect ratios - other than bs player ?

The plugin is what it is: a browser plugin - it cannot act as a standalone player.
To play local flv files you either need to
download/install the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
download/install Adobe Media Player http://www.adobe.com/products/mediaplayer/

In Elements 12, how do I get thumbnails to show when opening a file?

In Elements 12, how do I get thumbnails to show when opening a file?

When in iPhoto (photos, library, an album, whatever, etc.) and I try to position the thumbnails at the top of the page I am unable to do so. In the "View" menu of iPhoto, then "Thumbnails" at the bottom, then all the items in the menu are grayed out. I have tried to go to iPhoto prefences and try there, but no luck. I get the beachball turning for a few minutes, then it stops, but still no luck.
I have iPhoto 08, OS 10.5.8, anda PowerBook G4, 17"
Thanks, and sorry for the brief/incomplete question.

Index file share with pictures - how to get the "Tag" property as refiner?

Hi,
I'm indexing a folder in file share and in the windows explorer view i gave values to the "Tags" property.
Now i want to set it as refiner in search results. I see that SharePoint gets the properties of: file name, size, picture height, picture width, author... how to get also the properties of Tags? and Dimensions?
keren tsur

Hi keren,
According to your description, my understanding is that you want to add some refiners based on pictures’ properties in SharePoint 2013 Search.
Firstly, do a full crawl for the content cource.
For the ‘Tags’ refiner, go to the results page, click on edit page and edit the refiners web part, then choose the Choose Refiners picker. Now add the TAGS field to the right hand column.
More information, please refer to the link:
http://social.technet.microsoft.com/wiki/contents/articles/23690.sharepoint-metadata-tag-refiners-not-displaying-in-sharepoint-2013office-365-search.aspx
SharePoint indexes an item based on list/library columns. However, for the Dimensions property of pictures, SharePoint library cannot retrieve the property from pictures . So when crawling, the property cannot be crawed as a crawled property, you are not
able to add it as a refiner in Search. When you use Picture Library, there are Picture Size, Picture Width and Height columns, you can create refiners based on these three columns. You can check them in Crawled properties(CA->Search Service Application->Seach
Schema).
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How do I get thumbnails to show?

How do I get thumbnails to show in iPhoto? When in iPhoto, the thumbnail menu is greyed out.

When in iPhoto (photos, library, an album, whatever, etc.) and I try to position the thumbnails at the top of the page I am unable to do so. In the "View" menu of iPhoto, then "Thumbnails" at the bottom, then all the items in the menu are grayed out. I have tried to go to iPhoto prefences and try there, but no luck. I get the beachball turning for a few minutes, then it stops, but still no luck.
I have iPhoto 08, OS 10.5.8, anda PowerBook G4, 17"
Thanks, and sorry for the brief/incomplete question.

How to get video thumbnails on the timeline?

I've got a single thumbnail at the very beginning of the video clip (on the timeline) ... I've seen pictures of thumbnails all along the timeline, wherever a clip changes. How do I activate this function? Can't find it in preferences.
Ben

You get thumbnails only when you add time markers. For each marker his thumbnail.

How to get Multiple FLV duration?

How to get Multiple FLV duration in single shot?. Am using Netstream concept.

I have more flv files and taking it via XML. I want to play the multiple flv video in single timeline. For that i need duration of multiple flv in for loop. Is it possible to take without metadata?

How to get facebook to say via ipad when I share something using my ipad

how to get facebook to say via ipad when I share something using my ipad

It appears that the app is indeed not available in Finland, as I can't find it by searching the iTunes Store there. You'll have to contact the developer of Onlive Desktop and ask if they have any plans to release their service in your country.
Regards.

PSE6 FLV Share - how to get thumbnails?

Similar Messages

Maybe you are looking for