PSE6 Watched Network Folders Won't Stick

Hi,
I'm trying desperately to get PSE6 to remember my 'monitored folders' on a network share and it won't remember it between sessions. I've changed the filewatcher service to use my credentials and the setting "goes in" fine, but won't stay put after I exit the program.
Any suggestions? Visa Ultimate 64.
Thanks!

This is something that is not supported in PSE.
I'm curious -- what leads you to that conclusion?  Is this referenced somewhere in the Adobe documentation or knowledgebase?  Many people have reported successfully watching network folders.

Similar Messages

  • How do I watch Network Shared Folders in Organizer?

    I must be able to watch shared folders on a network share in organizer.
    Is there any way to be able to do this????
    I'm using Photoshop/Premiere Elements 12.
    Is this functionality present, or any easier, etc. if I upgrade to 13?
    For Example: One problem that comes up is, if you're able to bring up the network places, and choose the share you want, getting the error "The watch folder service returned an error: The user name or password is incorrect."
    I've investigated this before, spent some time, couldn't get this to work after some internet searching. I'm now re-visiting this trying to get it to work.
    Thanks!

    Here is the resource I find on the subject:
    Photoshop Elements 6/7/8 Frequently Asked Questions (FAQ)
    [Note, how this is a problem back with PE 6.. I had PE 6... quit using it because of this same EXACT problem. I'd think that Adobe would fix this problem by 6 (or 7) versions later?!]
    I tried changing the logon for the service the last time I worked on this and for some reason it didn't work. For whatever reason, I didn't get any errors this time.
    I think my problem is, "watching" a folder isn't doing what I would have expected it to do. I'm expecting to choose a watched folder and then it will automatically populate my entire library (and then automatically update that as I add/delete/change files/folders). But I choose the watched folder, click the 'auto-something' (can't remember what it says) option, and then... nothing...

  • Mail settings won't stick, how to fix?

    The column settings in Mail suddenly won't stick. Probably a corrupt preference? What's the best way to deal with the problem?
    Thanks,
    iHope

    Well, in theory, if we backup the whole shmeer, we can at least go back to where we are now...
    Quit Mail. First I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    Try dragging this file to the desktop in case we need to put it back later...
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist
    (May or may not require you to setup your account(s) again.)
    Then In your home folder, try moving this +folder & file+ to the Desktop then reboot...
    First, Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these +folder & file+ to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    These too...
    /Users/YourUserName/Library/Mail/<[email protected]>/.mboxCache.plist
    /Users/YourUserName/Library/Mail/Mailboxes/.mboxCache.plist
    Reboot.

  • Deafult Printer won't "stick" XEROX Phaser 7760GX

    When I set the XEROX Phaser 7760GX IP networked printer as default in system settings, it has reverted to "last used" next time I i look. I have downloaded and installed new printdriver since upgrading to Leopard and it prints fine but won't stick.
    It might be the same problem but in the Adobe CS3 InDesign Print Presets [Deafult] I'm unable to select the Default Printer (Greyed out)

    I have another idea on how to use the old driver. NO guarantees.
    For all who may be reading this -- this is for Yosemite -- it reduces security by relaxing sandboxing. It is a workaround, not a permanent fix.
    Use the Terminal utility to run the two commands below -
    sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
    sudo launchctl stop org.cups.cupsd
    (sudo means superuser do - this is your admin user on OS X. It asks for your password - but it hides it from you when you type - for security)

  • VPN password won't stick

    I enter my VPN password in the Network settings but the password won't stick. I keep getting a dialog box that asks me to re-enter it. This just started to happen. How to fix?
    Thanks in advance,
    Ken

    Hello,
    Is there more than one entry for that account in Keychain Access?
    I mean there should be 2, one for incoming & one for outgoing.
    The Password rejection can confuse people since it's a catch all meaning...
    This Password, Username, Authentication method... is not recognized on this Port to this Server, or a server end problem.
    If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.
    Is it gMail maybe?
    Gmail send but not receive...
    Here are two steps that have come in handy in related situations
    1) login to gmail on your computer or device via a web browser
    2) once logged in successfully, go to this URL to unlock:
    https://www.google.com/accounts/DisplayUnlockCaptch

  • Default paper size won't stick in Snow Leopard

    Hi,
    I have a Mac which prints to a usb laser, which is on the network. Since Snow Leopard the default paper size won't stick. Every time I print I have to change it from US Letter to A4. It's ok on the Mac which host the printer. Both Macs are on Snow Leopard. (I have ensured that the Region is appropriate and set the Default Paper Size in the Printer prefs.)
    Anyone any ideas?

    I had a similar problem and none of the above solutions worked. However, with the help of my daughter, we figured it out (at least it worked for me).
    Go to Apple Preferences/Print & Fax.
    Pick your printer.
    Ensure the 'Default paper size' is correct.
    Click on the 'Options & Supplies' button, then 'Driver'.
    On the Fit to Page menu, choose 'Nearest Size and Scale'
    All the programs now use the default paper and size.
    I hope this helps.
    Don

  • My iPhone won't allow me to scan for any network and won't even pick up on any wifi networks near by. How do I fix this?

    My iPhone 4s won't allow me to scan for any networks and won't even pull up wifi networks near by. How do I fix this?

    Settings > General > Network > Reset Network Settings.
    If that does not resolve the issue...
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • "Show Script menu in menu bar" setting won't stick

    Hi all,
    I'm starting some Applescript development, and I'd like to make some scripts available in the Scripts menu. I checked the box to "Show Script menu in menu bar" from within the prefs for AppleScript Editor, but it doesn't work. When I close AppleScript Editor, relaunch it, and look at the prefs again, the box is unchecked. I deleted the relevant preference files from my Library and recreated them by launching AppleScript Editor, but the setting just won't stick.
    Any ideas?
    -Tim

    Taylor,
    The preference that I'm looking at is within AppleScript Editor, the program I use to write new AppleScripts. Script Editor was the previous name of the same application. When I check the "Show Script menu in menu bar" in the AppleScript Editor prefs and close with window. The box is unchecked the next time I open the AppleScript Editor application, and the Script menu never appears in my menu bar. Everything works fine on my iMac at home. The problem seems to be isolated to my MBP. Weird.
    -Tim

  • License key won't "stick"

    Hi, I'm administering a Contribute site for about 20 users. I
    installed and licensed all of my authors' copies of 3.0 without
    incident with one exception: one user's license key won't
    "stick"--she's prompted for the license number every time she opens
    Contribute. It lets her in each time, but it's obviously a pain for
    her to have to do this every time. The only thing different about
    her workstation that we can think of is that she has Adobe Acrobat,
    and others don't. Would there be a conflict between Adobe software
    license numbers? It's all I could think of...

    Sien,
    Virtually every time this question comes up, it's a matter of pilot error. You'll need the hyphens. Also make sure that you properly distinguish between zeros and O's, and ones and lower case L's. A hard-to-read typeface was chosen for the serial number on iWork '05. The zeros should have a dot in the center.
    When you get it right, the submit button will be active.
    -Dennis

  • Network folders for "other" user

    I have managed to set up a lab of iMacs (new) bound to AD via Windows Server. I had users make shortcuts to their 3 main network folders. Works fine. Users can't always get to "their" workstations though so I'd like to set up the "other" user to load those same three network folders on log in, or at least make it easy for them to do it once logged in. As is, the server shows up a finder window's left pane under "Shared" but they have to drill through the whole server to find their own folders.
    I'm just a teacher here, though I've made WAY more progress then the IT bozos that get paid for this, they have deferred to me (thank goodness).
    Any help much appreciated.

    I followed the suggestion of plugging the EX2 directly into the Windows8 PC, and it didn't work, in-fact the internet stopped working, until I reverted the connection and let windows fix the problem. I did make a minor step with homegroups, as I felt there was no where to turn but to try to get homegroups working once again.  It works, the homegroup sees the other computer, but every second, yes, every second, when you click on the homegroup icon in windows explorer, the window to the right changes from the name of the Windows 8 computer to immediately No other homegroups PC's are available right now, that happens every second, I can time it, it switches every 1-2 seconds between the name of the Windows 7 computer to the error I posted a few words back.  Sharing anything drive on the EX2 so it can be accessed on Windows8, same as it always has been, I don't see the drive on Windows8.  Mapping the drive on Windows7 works flawlessly, except, I have a few files that I know I didn't delete but are not showing up, and I have transcoded folders ? As well I can't share any folder on the EX2 because it's listed under the user nobody and it's restricted to that users control for which I don't have a password for ?

  • Finder problems using network folders

    I am using NFS in my setup with an iBook and a PowerMac G5 both using NFS to network to a Linux fileserver. I am having some unusual problems with the Finder. Specifically, when I try to copy files from a local to a mounted NFS folder using the Finder, it can cause the system to hang. Moreover, even when copying a file within an NFS folder to the same folder under a different file name and then deleting the copy, the Finder display often goes crazy sometimes refusing to display any files in the folder or even worse, scrambling the file and/or subfolder names in that NFS folder. The problem seems to be entirely in Finder because when I look at the same folder in Terminal, everything works fine -- there is no underlying NFS problem.
    The problem is even more acute when I use the NFS union mount option. What I want to do in my iBook is to union mount a network users diretory on top of /Users -- this way, both local and network users will have their directories available to them in the same place. Union mounts drive the Finder crazy and this can be readily checked. The mount seems to work fine, and the finder displays the union-ed directory fine. However, when you try to look at any of the folders in the directory, I basically get a system folder that is not even in the same directory tree sometimes, and at others, random network folders. Again, when looking at things in Terminal everything seems to work fine.
    What is wrong with Finder and NFS? How on earth can Finder have problems displaying a directory structure? I keep having other problems when using GUI based programs with NFS volumes -- random failures seem all too common while the Terminal seems to work fine each time. Is the Apple implementation of NFS hopelessly broken? Or is it just the Finder that has problems. Either way, I am surprised and concerned that a mounted network directory exhibits seemingly random behavior in a GUI. Any help on these issues would be much appreciated.
    Power Mac G5 2.0Ghz Mac OS X (10.4.6)
    Power Mac G5 2.0Ghz   Mac OS X (10.4.6)  

    Seems to be new behavior that if you delete a directory you are currently in it jumps back to the root instead of a directory above or after the deleted one. Just press the back button and you will be back in the directory.

  • After upgrade to latest firmware canon network printer won't print

    after upgrade to latest firmware canon network printer won't print. It's a canon MP540 on a wireless network. It will print a test page but won't print from any application, just sits there with the message 'copying print data'!
    Running Mac OS X Lion 10.7.2 (11C74), with firmware SMC Version (system):          1.73f63.
    Any help gratefully received.

    First off if you can print a test page there is absolutely no reason you wouldn't be able to print from a application...none.  But stranger things have happened now that we have Lion.  Within the application are you selecting the wireless printer........just had to check.
    I have the MP620 which is simlar to your MP540 and have no problems printing from my MBA (June 2011).  I too have the latest firmware and software......without problems printing.
    A few things I'd try would be to remove the wireless printer from your computer (in Preferences, printers), restart, and repair permissions.  Then add the wireless printer back, and see if it works.  If not.....power OFF the printer and turn back on.
    If the above fails reinstall the printer driver (yours) I think you will have to plug in the USB cable. 
    Keep me updated and I'll tyr and help!

  • Programs that require a network connection won't work because there is no virtual IP address available for this session.

    Programs that require a network connection won't work because there is no virtual IP address available for this session.  Per application IP virtualization is enabled.
    There are in fact available IP address's within the dhcp scope.  Before I dig to deep into root cause.. Could the problem be RDS CAL licensing running out, or isn't that not a symptom of my error message?

    Hi,
    Thank you for posting in Windows Server Forum.
    As per my research, there is no any issue related to RDS CAL licensing. Prior to the issue which you are facing, there are some basic setting which need to configure.
    Application Compatibility – Turn on Remote Desktop IP virtualization
    Some applications require a unique IP address, which is by default logically not the case if the application is running on RD Session Host. To solve this issue, Remote Desktop IP Virtualization is introduced. With this setting you enable the IP virtualization
    feature. When enabling this setting you need to specify if the virtual IP is provided per session or per program. When using per program you need to define the executable to which an IP address should be configured. Desktop IP virtualization also needs the
    configuration of the next setting.
    Application Compatibility – Select the network adapter to be used for Remote Desktop IP Virtualization
    When you need to use Remote Desktop IP virtualization configuring this setting is mandatory. You need to specify the IP address of the Network Interface Card which should be used for this feature. Besides the IP address you need also to specify the network
    mask using the slash notation, for example 192.168.77.201/24.
    Application Compatibility – Do not use Remote Desktop Session Host server IP address when virtual IP address is not available
    More information:
    Microsoft RDS Policies explained (Part 2)
    http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/microsoft-rds-policies-explained-part2.html
    Configuring Remote Desktop IP Virtualization II
    http://blogs.msdn.com/b/rds/archive/2009/07/15/configuring-remote-desktop-ip-virtualization-ii.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Boldface won't "stick" in database document

    I'm using a large database document in AppleWorks in which some text is boldfaced. Boldface won't "stick" in those fields now -- if I boldface some text, it returns to lightface as soon as I move out of the field. If I enter a field where the text is already boldfaced, it immediately returns to lightface. I've tried closing the document, restarting AppleWorks and restarting the computer, and the problem continues.
    I'm running a MacBook with OSX v. 10.4.11 and AppleWorks 6.2.9.
    Thanks for any help.

    "Is there a way to export all of the data in the file to a new file without copying and pasting pieces of it or carrying over the corrupt data?"
    Create a new DB document with the same fields in the same order as the old one.
    Open the old one, show all records in "List" view.
    Go file > Save as... ASCII Text (or Text, whichever is available in the list of Save as choices).
    Switch to the new DB
    Click on the single (empty) record in the DB to select it, then go Edit > Clear to delete the record.
    Go file >Insert... to open the Open dialogue.
    Navigate to and select the Text file you saved above. Click Open.
    Check to see that the imported data has gone into the correct fields. If it has, you're done. If it hasn't, then the Tab order of the fields in the two DBs does not match. Revise the tab order of one so that they are the same in both DBs, then repeat the process above.
    Regards,
    Barry

  • Color profile won't stick.

    Since I installed a Matrox M9125 graphics card, colour profiles set in "Color Management" won't stick. The default "Device" for "Common Management" is "Display: Generic Non--PnP Monitor - Matrox M9125PCIe x16". When I select my actual monitor (NEC 2690) from the Device drop down list profiles appear - including one I have made using an Eye-One Display 2 - and I can set it as the default one. However, when I re-open "Color Management" the profile I just set is gone, the profile list is empty and the Device is back to the Generic PnP ...display etc.
    The profiles worked fine in my previous vga card (Nvidia) and stayed selected.
    I have Vista Ultimate 32Bit and CS3.
    Grateful for any help on this.
    David

    Hi,
    I just want to sympathise with the China/Printer issue.
    Most of my artwork goes over there and I want to rip my hair out with every new job. Steve is right that we as artists really should go by the printer's specs, but when dealing with a language barrier, not to mention a 12 hour time difference it's so far been imposssible for me to do. I keep a Pantone color picker at my desk and manually enter in the CMYK values. It doesn't always work though.
    About your problem, the only thing I can think of is that you have images in your file that were RBG when placed in your file. It might not be what's going on, but something to check anyway.  
    Good luck,
    Cherie

Maybe you are looking for