PSE7 and Windows Vista 64 Home Premium

When PSE-7 opens, a warning box with a message:
ADOBE PHOTOSHOP (Organizer) ,  [and sometimes (Editor)]   stopped working.....
Windows is searching for  a solution...(and I never received a solution notification)
After I  re-installed the program- many months ago..It works  OK, now it is not working
at all, I can manage open editor..but It will bring the same message.
No other programs had been intsall except DIGIPRO-T-8000U Tablet and Pen, but I deleted
the Tablet/Pen application, cleaned disk, defrag... Re-Istalle ADObe pS& again and again
It does not help.
What can I do? It is a driver a patch needed?  Thanks Olga C

Try installing the licensing-service update:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice
If that doesn't help, then I recommend working methodically through these troubleshooting steps:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Organiz er_crashes
Many people are tempted to take shortcuts on these or do some steps their own way, especially with the steps listed in the Adobe tech notes.  If you do, you're less likely to solve your problem. 

Similar Messages

  • Corrupted User Accounts in Windows Vista 64 Home Premium?

    ***FYI I'm using my desktop.
    Toshiba Satellite L305-S5908
    Model #: PSLB8U-05202F
    Windows Vista 64
    So just today, I had accidently dropped my laptop. I was logged into my user account, and it completely froze a few moments after. I had to reboot it, and when I did, I could not log in to my user account at all! I would be able to type in the password, but once I hit ENTER, it turned blank with only the Windows Vista 64 background displaying. I went on safe mode, and surprisingly, I was able to log onto the user account.
    I have another user account (that I rarely use) that I could log on to safe mode as well. However on normal start-up, I was able to log in, but then it completely froze again. The second time I tried to log onto that user account, the computer completely froze when I was about to type in the password.
    From what Toshiba support told me, the User accounts must have been corrupted from the drop, and they told me to Google "How to fix corrupted user accounts". However, from research I am supposed to create a new user account but I cannot make a new one because I cannot log into any of the user accounts at all. (They cannot help me any further because my warranty expired.)
    So, I'm turning to you forum. How do I fix this?

    I deleted the bad user accounts, and saved their files into the new user account.
    The proper way to copy a profile is detailed here.
       Fix a corrupted user profile 
    I did Disk Check again, and it got past the previous stuck point, but it is now stuck on the 524373th free cluster. Should I make a new thread dealing with the new issue I have?
    I forgot to mention that it may be necessary to run chkdsk /r many times.
    No necessity for a new thread.
    ...seems like I have to pay for it?
    Yes, SpinRite costs money. But it's a good product and the circumstances may warrant it. It might come in handy for another drive in the future as well.
    In this case, you may prefer to purchase a new drive. It may turn out that you need a new drive in any case. Certainly, you should be prepared for that by having the recovery discs.
    -Jerry

  • Loading Itunes on a 64 bit windows vista laptop/home premium

    get an error "cant use libraries.itl" was written by later version? I uninstalled and still ge4t error? thanks for any help

    Yes. PSE works on both 32bit and 64 bit systems.
    PSE is not being discontinued. The on-line service at Photoshop.com is simply moving to Adobe Revel.

  • ZEN 8GB - Not recognized in Windows Vista 32 Home Prem

    My ZEN 8GB but it doesn't seem to work with Windows Vista 32 Home Premium.When I?connect it'sto?USB Vista says: "New hardware detected, installing?device driver".When looking at the status?(after a while) I get the message:?"Installing MTP-device failed".Finished!I installed the latest soft- and firmware but nothing.Are there more people with the same problem?Or anybody with a sollution?

    I found a kind of solution.On the Creative website (> downloads > left side) you can find the MP3 Recovery tool.After running this tool (and a second firmware update) my?ZEN was recognized by Vista.Problem solved!?

  • Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2?

    Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2? Earlier when checking for updates there were compatibility issues. Were these issues resolved to allow me secure operation with Firefox 4.0?

    I also am a zone alarm user and was not to happy about the issue with 4.0
    I use sky .fm for music and was not happy when it would not play. required update to latest flash,which didn't work no matter what. even the suggestion in another thread.

  • Upgrade from VISTA (x32) Home Premium to Windows 7 Home Premium (x32).

    I want to upgrade to Windows 7 Home Premium (x32). I have a HP Pavilion a6450z which has a SLIC 2.0 BIOS made by Phoenix Technologies. I am running VISTA (x32) Home Premium now, which came on the computer when I bought it in May of 2008. From what I’ve read I need to upgrade my BIOS so it will have SLIC 2.1 otherwise I won’t be able to activate it. Is this true or when I install Windows 7 will it automatically upgrade my BIOS?
    Thank You Hank
    This question was solved.
    View Solution.

    HankT,
    When asking a question with undeclared statements, you make it more difficult. Do you have a link for your references concerning an need to upgrade the BIOS. On the webpage BN listed, there is no BIOS update.
    I have an HPm8100e CTO, M2N68LA Narra2 board. You have the Narra3 board. The in-place upgrade (abeit it was Ultimate) was successfully completed. The only hick-ups were re-install of a few games, and new printer drivers. (I had 2 printers on that machine).
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Quicktime 7 will not install fully on my windows 7 64 home premium keeps stoping with an error while trying to create directory

    I have a Laptop with Windows 7 64 Home premium, I have tried a few times to install Quicktime 7 on my laptop. But keeps stopping with an error saying "An error occured while attemping to create the directory: C:\windows\Installer\{F5266D28-E0B2-4130-BFC5-EE1-55AD514DC}
    Windows is fully up todate, I have no virus or anything harmful on my computer. After clicking retry the error keeps popping up. I then click on cancel and delete the downloaded quicktime installer. I shut down my computer and try again. Same error with not luck. Any help?

    Just in case, let's check for disk/file damage.
    The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Photoshop CS6 upgrade and Windows Vista

    I own Photoshop CS5 and Windows Vista Home Premium 32-bit platform. Can I upgrade to CS6 ? Your upgrade ad and recent published info says that only platforms using Windows XP or Windows 7 are upgradable. What happened to Windows Vista ?

    It works on Vista, even if it is not officialyl supported. Just be prepared that things like OpenGL support, tablet drivers etc. may act funny and some features may not work at all.
    Mylenium

  • SAPGUI 6.4 and Windows Vista

    Hi,
    does any of you know how SAPGUI 64 and Windows Vista workl together?
    What Windows vista Version is the one to work with? Basic Home?, Basic Premium?, Professional?
    thanks for your help.
    MAuricio

    Hello Mauricio,
    SAPGUI 6.4 will work with Vista, but just make sure that you have the latest patch level.  We are upgrading to Vista and have tested 6.4, patch level 23 with the OS successfully.  The version of Vista "should" not mater as the underlying structure of each version is the same (they use the same kernel) just that each version has different features enabled/disabled.
    Thank you,
    Thomas

  • Incompatibility among the authentication WEB-based and Windows Vista

    I have a Wireless LAN Controller 5.0.148.2 and Access Points 1252 and 1231; the customer have 8 laptops with Windows Vista that they present problems when to get connected to the Guest's WLAN; these same ones do not present problems when they authenticate to Employee's WLAN through PEAP. The laptops with Windows XP do not present this problem.
    The users that are connected to the Guest's WLAN then they obtain correctly the direction IP through DHCP; the Guest's users can not visualize the page find salutatory Web or when sometimes they visualize it, they introduce the username and password and next do not visualize the page accordingly, and they do not connect to the Internet.
    Them laptops in mention come from different manufacturers ( HP and DELL ), Windows Vista's versions ( Home Basic and Home Premium ) and wireless cards ( INTEL and ATHEROS ).

    I'm having the same problem with our student wireless. It uses web authentication and Windows Vista and Mac users are having problems but Windows XP works fine. They all get IP addresses but aren't getting presented with the login page.

  • Suyin Webcam "Not installed or in use by another" error on windows 7 64 Home Premium. I have tried all advice found, nothing works. Can you help me?

    Hello,
     I have an integrated webcam that has not  been working for approx 6 months! I have updated the  Suyin driver/software from Gateway.com. It installs with no problems. I have the webcam icon on
    my toolbar and I am able to open the help menu for the software and directions on how to use the camera. However I can't open the preview window and get an error message "camera not installed or in use by another." In device manager, it shows 1.3
    M webcam under imaging devices with no errors and the driver being updated. The driver is not Suyin but  a Microsoft usb video driver
    6.1.7601.17514 from 6/21/ 2006? I have done driver scans from multiple sites that show the webcam driver is up to date?
    I have a NV53A Gateway laptop with an AMD 4200 Radeon HD Graphic Card which is updated from AMD.com with a 13.1 Cataylst Vision Engine Control Driver for my AMD VGA card. The webcam worked before with AMD updates such as 12.6.
    I have windows 7 64 Home Premium SP1      Processor
    AMD Phenom(tm) II N830 Triple-Core Processor, 2100 Mhz, 3 Core(s), 3 Logical Processor(s)BIOS Version/Date
    Gateway V2.04, 10/25/2010
    SMBIOS Version 2.6
    Windows Directory C:\Windows
    System Directory C:\Windows\system32
    Boot Device \Device\HarddiskVolume2
    Hardware Abstraction Layer Version = "6.1.7601.17514"
    Installed Physical Memory (RAM) 4.00 GB
    Total Physical Memory 3.74 GB
    Available Physical Memory 1.61 GB
    Total Virtual Memory 7.49 GB
    Available Virtual Memory 4.74 GB 
    DirectX:11
    Device Manager Info:USB\VID_064E&PID_A219&REV_0215&MI_00
    USB\Class_0e&SubClass_03&Prot_00
    usbvideo{6bdd1fc6-810f-11d0-bec7-08002be2092f}\0000-driver key
    \Device\00000087
    000000A4
    CM_DEVCAP_REMOVABLE
    CM_DEVCAP_SILENTINSTALL
    CM_DEVCAP_SURPRISEREMOVALOK
    {9d7debbc-c85d-11d1-9eb4-006008c3a19a}-bus type guide
    DevNode Status:
    0180600A
    DN_DRIVER_LOADED
    DN_STARTED
    DN_DISABLEABLE
    DN_REMOVABLE
    DN_NT_ENUMERATOR
    DN_NT_DRIVER
    USB\VID_064E&PID_A219\HF1315-S32B-OV01-VA-R02.01.05- Parent:usbvideo.inf:Microsoft.NTamd64:USBVideo:6.1.7601.17514:usb\class_0e
    00FF2002- rank  of installed driver
    I hope I provided enough info for you to help me? Everywhere I go I have done what I read, such as uninstall, reinstall, update driver, download from inf file, go to gateway.com,etc...
    I don't know if AMD is controlling my webcam? When I click on flash it states no webcam found, the mic is found though. Skype and other sites also say no webcam found. I don't know why I can't install Suyin through device manager?
     The software installed is
    UVC 0.6.47.1:VIDEO Web Camera
    I have multiple registry entries for suyin from the download such as regedit 5.0 Suyin which by default has this error message in many languages? There is also a USB registry that flashes when installed and
    a echo@  registry entry too. These are located in the folder in Windows/ Programs/86 under Video Web Camera. What has taken over my webcamera?????
    I don't know if I need a BIOS update to fix  this from gateway.com??? I haven't done that because I am unsure and don't want to make this worse. I do find at the gateway site the only update is the webcam
    which is 1/21/11. The others are the same  from 6/24/2010, which I already have. I bought the computer in 12/2010 new. The webcam was working in 12/13 , for I had a 2 year warranty and no issues .  I think this is a simple fix but I am not an expert,
    only good at following logical,proper instructions to fix an error. 
    I'd be grateful and shocked if anyone can help me. I have no viruses and have Norton 360 running all the time and done check-ups with Malware and Superspy.
     I have another user on my computer which is myself but logged off. If I deleted the other user, would my webcam work or is it my registry, AMD??? I am sooooo frustrated !!!!!! I am confused why
    device manger states no errors and driver sites find no webcam updates or errors, either. There is no Suyin driver in the driver store and the inf file won't install per device manager? 
    Thank-you for your time and if you are unable to assist me , please advice where to go. Please let me know if you need more information.
    Kindly,
     Victoria

    I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

  • Microsoft Windows 7 x64 Home Premium Edition (Build 7600) Dell Inc. Inspiron N7010 iTunes 10.7.0.21 QuickTime not available FairPlay 2.2.19 Apple Application Support 2.2.2 iPod Updater Library 10.0d2 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile De

    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    Dell Inc. Inspiron N7010
    iTunes 10.7.0.21
    QuickTime not available
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0032B09C094C1B88
    Current user is not an administrator.
    The current local date and time is 2012-09-26 16:25:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) Graphics Media Accelerator HD
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {4C5C6911-9B8F-4CAF-BCB3-36495F443DC9}
    Description:          Microsoft Virtual WiFi Miniport Adapter #2
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 07:00:00 1970
    Lease Expires:          Thu Jan 01 07:00:00 1970
    DNS Servers:
    Adapter Name:          {9A01C758-72D3-4F24-8B9C-402D925B9FC5}
    Description:          Intel(R) Centrino(R) Advanced-N 6250 AGN
    IP Address:          192.168.1.5
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.1.1
    Lease Obtained:          Wed Sep 26 15:09:47 2012
    Lease Expires:          Sat Sep 29 15:09:47 2012
    DNS Servers:          192.168.1.1
    Adapter Name:          {B98F7EEA-03A3-4616-B167-E9E4C6A09439}
    Description:          Intel(R) Centrino(R) WiMAX 6250
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 07:00:00 1970
    Lease Expires:          Thu Jan 01 07:00:00 1970
    DNS Servers:
    Adapter Name:          {70E7745B-22AB-41A8-A36B-393DCE93A39A}
    Description:          Atheros AR8152 PCI-E Fast Ethernet Controller
    IP Address:          192.168.1.4
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.1.1
    Lease Obtained:          Wed Sep 26 15:09:33 2012
    Lease Expires:          Sat Sep 29 15:09:33 2012
    DNS Servers:          192.168.1.1
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-09-26 16:17:01.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    E: HL-DT-ST DVDRWBD CT30N, Rev A100
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.7.0.21 (x64) is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    i cant access to itunes store
    Can you walk us through what happens when you try to connect to the Store, please?

  • Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out.

    Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out.  HP 600-1315xt.
    Have tried everything I can find on internet and here on HP. None of the suggestions worked. Windows fixit for windows could not fixit. Any suggestions are appreciated. I can always use my disks and rebuild the computer. A last resort.

    Hi,
    It might be the graphic driver not compitable with the graphic device.  Has there been a change to the graphic driver?
    One thing you can try is to uninstall graphic driver and download the latest from Windows Update (if you haven't tried this).  Here are the possible steps:
    1.  Go to Control Panel->Hardware and Sound->Device Manager,  uninstall the graphic card driver by right clicking and select "uninstall".  Make sure the option "Delete the driver software for this device" is selected.
    2.  Reboot the system.
    3.  Go to Control Panel->System and Security->Windows Update, click on "Optional updates" and find the driver for g210 and do the update.
    I work on behalf o HP.
    Please click the white Kudos star to say thanks.
    Please click Accept As Solution if you found my response helpful.

  • IE11 Windows 7 SP1 Home Premium - frequent waits

    IE11 with current Windows 7 SP1 Home Premium 64bit - Yesterday I allowed Windows Update to upgrade IE10 to IE11.  Since that upgrade, when I'm using IE11, my fast desktop PC has MANY frequent little "waits", where the little spinning
    circle appears on the screen.  I think the spinning circle replaced the old hourglass.  Anyway, when the circle is on the screen, things are frozen.  Even as I type this posting, the keyboard has frozen for a second or two every few seconds. 
    This NEVER happened with previous versions of IE and it never happens now with Firefox or Chrome.   Reboot does not fix the problem.   Only freezes when IE11 is open.  Freezes/waits also are happening without the circle appearing. What
    to do?  

    Hi,
    You may try to reset Internet Explorer settings to check the result.
    Reset internet explorer settings and check if it helps.
    http://support.microsoft.com/kb/923737
    Please understand that reset Internet Explorer to its default configuration. This step will also disable any add-ons, plug-ins, or toolbars that are installed.
    If it does not work, based on my experience, this is usually caused by 3rd party add-ons. Please launch IE 11 in No add-ons mode for a test. Click Start -> All Programs -> Accessories -> System
    Tools -> Internet Explorer (with no add-ons). 
    If the issue does not occur, refer to the following link.
    Slow five tips to boost performance
    http://windows.microsoft.com/en-us/windows/help/internet-explorer/slow-five-tips-to-boost-performance
    If starting Internet Explorer with no add-ons resolves the problem, isolate the browser add-on that is causing the issue. To do this, follow these steps :
    1. Click Start , and then click Internet Explorer.
    2. Click the Tools button, and then click Manage add-ons.
    3. Click an add-on in the Name list, and then click Disable.
    4. Repeat step 3 until you identify the add-on that is causing the issue.
    You may also back to use IE 10 as a workaround to check this issue.
    For more information, you may refer to:
    Fix Internet Explorer issues to make IE fast, safe and stable
    http://support.microsoft.com/mats/ie_performance_and_safety/en-us
    Tips for solving problems when Internet Explorer crashes or stops working
    http://windows.microsoft.com/en-US/windows7/tips-for-solving-problems-with-internet-explorer
    Hope it works.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • HT1369 Microsoft Windows 8 x64 Home Premium Edition (Build 9200) Acer Aspire V5-552 iTunes 11.1.4.62 QuickTime 7.7.4 FairPlay 2.5.16 Apple Application Support 3.0 iPod Updater Library 11.1f5 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile Device 7.1.

    unable to contact my iphone or ipad to itunes
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Acer Aspire V5-552
    iTunes 11.1.4.62
    QuickTime 7.7.4
    FairPlay 2.5.16
    Apple Application Support 3.0
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.0.32
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 009DB88803B66C30
    Current user is not an administrator.
    The current local date and time is 2014-01-24 20:53:12.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.4.62 (x64) is currently running.
    iTunesHelper 11.1.4.62 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Device Sync Tests ****
    No iPod, iPhone or iPad found.

    i cant access to itunes store
    Can you walk us through what happens when you try to connect to the Store, please?

Maybe you are looking for

  • Power button not working Yoga 11s

    My yoga 11s went into sleep mode while plugged in sitting on my desk yesterday now the power button is not working. The light of the power button and the battery are on, but the screen will not turn on.

  • Bluetooth not functioning correctly.

    Bluetooth not functioning correctly. I have version 10.10.2. How can I get it to connect and be stable?

  • Installing Oracle Apps 11i (11.5.7) on W2K Server, Bootstrap Failed

    Installing Oracle Apps 11i (11.5.7) on W2K Server: System Configuration: Oracle 11i E-Business Suite 11.5.7 Windows 2000 Server with Service Pack 2 Microsoft VC++ Installed from Microsoft Visual Studio 6.0 MKS tool kit for Developers 8.1 Gnu -> make-

  • Problems with photo in movieclip

    Hello everyone, I'm working on a mobile application with Flash Lite. I want to load some photos into a movieclip. I use a SQL database and one field is called 'photo1_huis'. The URL in that field is http://www.eventeffects.nl/FundaMobile/1/foto1_huis

  • Dinamically changing values of a sub-VI

    hi, let B be a sub-VI of A. is it possible for B to be "transparent" - that is, if A has controls connected to B's controls, and indicators connected to B's indicators, then changing a value in A *while B is running* will affect the value of the cont