PSE7 Backup/Synch Not as Described in Manual or Help
XP SP2, 4G RAM, plenty of hard drive space.
Descriptions clearly state that backup to photoshop.com requires images to be in an album. I set up one album and put a test set of 24 images in it. The uploading started after a few seconds or minutes but continued to run for hours.
I checked my photoshop.com page and here's what happened. The album appears but has only 3 images rather than the 24 in my PSE7 album. The "My Photos", "Library" section on the photoshop.com page has 1152 images (limited by the 2G I suppose). Those 1152 images are multiples of the 24 images in the album on my desktop PSE7 but not shown in the album on the web page.
Some of the repeats are 32 to 52 times but I can find no pattern for the number. I suppose my repeated attempts to get the sync to work could account for some repeats but not 32 to 52. Now I am faced with removing the album and starting over but I'm not sure how to do that without removing the items from my desktop.
What did I do wrong?
Robert:
You could also try and delete the folder (and all contained files) called "syncdb" that is located next to your catalog file.
C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\Catalogs\[your catalog name here]
This causes the Backup/Sync stuff to start fresh.
Steps would be:
Exit Elements Organizer
Delete that syncdb folder
Go to your account at PS.com and delete all your files.
Launch Elements Organizer
Turn Sync back on (Edit>Preferences>Backup/Sync)
Create a new Album and mark it for Backup/Sync
Put some files in it.
Wait for the backup to happen.
One thing to keep in mind is that if images are being uploaded to PS.com by the PSE Organizer, you'll need to Refresh PS.com to see the images that have been uploaded since you opened it. There's a little green "recycle" type icon near the upper right of My Photos. Clicking that icon causes PS.com to re-read your online catalog.
Closing your browser and re-opening PS.com will do the same thing.
Not sure that this is causing the wackyness, but it may help clear up why you were not seeing all your photos at PS.com
Hope it helps.
Bob
Similar Messages
-
Hi
When i am trying to restore backup to my iphone, its coming up backup is not compatible with iphone. Please help me restore.
Thanks
MandyFrom the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them. -
At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer". Any ideas on how to resolve?
See:
iOS: Troubleshooting backup issues in iTunes
Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one. -
Runing windows 7, iTunes update will not install auto or manually. Have deleted old backupand tried reinstalling iTunes. Ideals?
I have the same issues. Any one out there with any good thoughts here.
-
Time Machine does manual backups but not automatic.
Time Machine skips automatic hourly backups but will do a backup if I click "Backup Now". Any idea why automatic backups are not working and how to enable them? Thanks.
Jan 14 04:10:17 myclienthost com.apple.backupd[18614]: Copied 16.0 GB of 17.4 GB, 462725 of 509959 items
Jan 14 04:16:21 myclienthost com.apple.backupd[18614]: Copied 504166 files (16.4 GB) from volume Macintosh HD.
Jan 14 04:16:26 myclienthost com.apple.backupd[18614]: 839.3 MB required (including padding), 253.24 GB available
Jan 14 04:16:46 myclienthost com.apple.backupd[18614]: Copied 1570 files (310 KB) from volume Macintosh HD.
Jan 14 04:16:50 myclienthost com.apple.backupd[18614]: Starting post-backup thinning
Jan 14 04:16:50 myclienthost com.apple.backupd[18614]: No post-back up thinning needed: no expired backups exist
Jan 14 04:16:50 myclienthost com.apple.backupd[18614]: Backup completed successfully.
Jan 14 04:16:54 myclienthost com.apple.backupd[18614]: Ejected Time Machine disk image.
Jan 14 04:16:54 myclienthost com.apple.backupd[18614]: Ejected Time Machine network volume.
Jan 14 05:11:18 myclienthost com.apple.backupd[19152]: Attempting to mount network destination URL: afp://[email protected]/Client%20Backups
Jan 14 05:11:20 myclienthost com.apple.backupd[19152]: Mounted network destination at mountpoint: /Volumes/Client Backups-1 using URL: afp://[email protected]/Client%20Backups
Jan 14 05:11:39 myclienthost com.apple.backupd[19152]: QUICKCHECK ONLY; FILESYSTEM CLEAN
Jan 14 05:11:42 myclienthost com.apple.backupd[19152]: Disk image /Volumes/Client Backups-1/My MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Jan 14 05:12:58 myclienthost com.apple.backupd[19152]: Network destination already mounted at: /Volumes/Client Backups-1
Jan 14 05:13:14 myclienthost com.apple.backupd[19152]: Disk image already attached: /Volumes/Client Backups-1/My MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Jan 14 05:13:16 myclienthost com.apple.backupd[19152]: Disk image /Volumes/Client Backups-1/My MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Jan 14 05:48:50 myclienthost com.apple.backupd[19287]: Starting standard backup
Jan 14 05:48:50 myclienthost com.apple.backupd[19287]: Network destination already mounted at: /Volumes/Client Backups-1
Jan 14 05:49:07 myclienthost com.apple.backupd[19287]: Disk image already attached: /Volumes/Client Backups-1/My MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Jan 14 05:49:09 myclienthost com.apple.backupd[19287]: Disk image /Volumes/Client Backups-1/My MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Jan 14 05:49:09 myclienthost com.apple.backupd[19287]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Jan 14 05:49:13 myclienthost com.apple.backupd[19287]: 536.7 MB required (including padding), 251.29 GB available
Jan 14 05:49:38 myclienthost com.apple.backupd[19287]: Copied 1913 files (30.5 MB) from volume Macintosh HD.
Jan 14 05:49:39 myclienthost com.apple.backupd[19287]: 500.4 MB required (including padding), 251.29 GB available
Jan 14 05:49:43 myclienthost com.apple.backupd[19287]: Copied 185 files (128 KB) from volume Macintosh HD.
Jan 14 05:49:44 myclienthost com.apple.backupd[19287]: Starting post-backup thinning
Jan 14 05:49:44 myclienthost com.apple.backupd[19287]: No post-back up thinning needed: no expired backups exist
Jan 14 05:49:44 myclienthost com.apple.backupd[19287]: Backup completed successfully.
Jan 14 05:49:47 myclienthost com.apple.backupd[19287]: Ejected Time Machine disk image.
Jan 14 05:49:47 myclienthost com.apple.backupd[19287]: Ejected Time Machine network volume.
Jan 14 05:49:55 myclienthost com.apple.backupd[19287]: Attempting to mount network destination URL: afp://[email protected]/Client%20Backups
Jan 14 05:49:57 myclienthost com.apple.backupd[19287]: Mounted network destination at mountpoint: /Volumes/Client Backups-1 using URL: afp://[email protected]/Client%20Backups
Jan 14 05:50:17 myclienthost com.apple.backupd[19287]: QUICKCHECK ONLY; FILESYSTEM CLEAN
Jan 14 05:50:19 myclienthost com.apple.backupd[19287]: Disk image /Volumes/Client Backups-1/My MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Note, there are no backup log messages for the last few hours even if I put new files or change files on the client. -
My iPhone 4s will not backup. I've tried repeatedly but keep getting the message "the last backup could not be completed". It's been nearly two months since the
last backup. However, my iPad2 is backing up perfectly. Any thoughts???????Try the following steps:
Plug your iPod Touch to your Mac/PC using USB cable.
Open iTunes software and choose “backup to this computer” .
Then you need to do a sysncing.
Go to iCloud (iPod Touch: Settings > iCloud) and delete all previous backups.
Then in iTunes, Turn on “backup to iCloud” again.
On your iOS device, now you are able to backup to iCloud. -
Hello,
Backup/synch is no longer working on my PSE7 catalog. I have been using it for over a year, this just started this month. I have a few new photos to upload, and a bunch that just need to synch again due to a minor change (I renamed the Windows folder they are stored in).
When I launch PSE7, backup/sync starts. After about 20 minutes it dies. The icon in Element (the two arrows) turns black. No pictures synchronize or upload during that time. The icon in the Windows sys tray goes away.
When backup/sync starts, I can see in Task Manager that PhotoshopElementsSyncAgent.exe
PhotoshopElementsFileAgent.exe are running. Once it dies after about 20 minutes, the PhotoshopElementsSyncAgent.exe stops running.
I have purchased 40GB of storage on photoshop.com, and I have used 32GB.
I have Repaired, indexed, optimized my catalog.
I uninstalled Photoshop Elements, and Reinstalled
From photshop.com I can use Photoshop Express to Upload a photo into my library
I created a new catalog and uploaded a couple of photos with no problems, so it must be a problem with my catalog or synch db?
I'm not getting any messages about warnings or conflicts.
I am running PSE 7 on Windows Vista SP2. I have downloaded and installed patch 703. Now when I select "check for Updates" I get a message that there are updates available. However when the process starts, it stops and then says "there are no updates available."
I checked my sync log, and it indicates contains errors. The first section says:
[20101024T092858] Info :SyncEngineCore:Sync Init: Sleep between sync cycles set to [300] seconds
[20101024T092858] Info :SyncEngineCore:Starting new Sync Cycle...
[20101024T092858] Info :AmocParticipant:Initialized sync database
[20101024T092858] Error :EMSParticipant:Database Error unsetting error staus :32
[20101024T092858] Debug :EMSParticipant:Checking disconnect error
[20101024T092858] Info :SyncEngineCore:Checking disconnect timeout :Timeout is::7200 min
[20101024T092858] Error :EMSParticipant:Database Error unsetting error staus :4
[20101024T092858] Error :SyncEngineCore:Error notifying sync error timeout.
[20101024T092858] Error :EMSParticipant:Database Error unsetting error staus :2
[20101024T092858] Error :EMSParticipant:Database Error unsetting error staus :128
[20101024T092858] Error :EMSParticipant:Database Error unsetting error staus :256
[20101024T092858] Error :EMSParticipant:Database Error unsetting error staus :64
[20101024T092859] Info :SyncSystemTray:Network change detected :: connected
[20101024T092859] Error :EMSParticipant:Database Error unsetting error staus :8
[20101024T092859] Info :EMSParticipant:EMS user account [[email protected]] LOGIN succeeded!!
[20101024T092859] Info :EMSParticipant:Sleep between sync cycles set to [600] seconds
[20101024T092859] Debug :AmocParticipant:Attaching amoc catalog
The last section says:
[20101024T093725] Info :EMSParticipant:Time elapsed Getting ems tag info ::35257 MilliSec
[20101024T093725] Debug :EMSParticipant:Getting tag changes on EMS side!!
[20101024T093728] Info :EMSParticipant:Time elapsed calculating ems side tag changes ::2854 MilliSec
[20101024T093728] Debug :EMSParticipant:Getting tag changes on EMS side DONE!! Count ::138
[20101024T093728] Debug :EMSParticipant:Getting media changes on EMS side!!
[20101024T095356] Debug :EMSParticipant:Got complete asset list from server ...
[20101024T095359] Error :SyncEngineCore:Unknown Faliure, Aborting Sync Loop...
[20101024T095359] Info :SyncEngineCore:Posted Quit Message to Main Thread.
Help please!Hi,
Sign out of your account. Stop sync and follow the steps mentioned at the following tech note http://kb2.adobe.com/cps/408/kb408660.html . Sign in and start sync again. See if it helps .
Also send us your Sync db : Navigate to your catalog location (catalog location can be viewed under Help>System Info)Zip the syncdb folder there and send to [email protected]
Thanks -
I have a strange problem. In my gallery I have photos, a couple of videos...nothing major. The Galaxy divides your gallery into folders...one of which is backup. I've reset to factory twice now with the same problem. All my stuff is safe...but it also includes every single facebook friends picture as well as icons from one game that I play through Zynga. How do I stop this from happening? It also says I have 533 pictures. I counted and there are not even close to that many...but backup says I'm almost out of space!
Help?
phyllisThanks for the answer! I did all of the steps. Under Facebook, the only
thing listed is contacts...which are synched. No Gallery listed. I
finally went to backup assistant and manually deleted them.
peace, phyl
Love recognizes no barriers. It jumps hurdles, leaps fences, penetrates
walls to arrive at it's destination full of hope.”.....Maya Angelou
In a message dated 9/25/2012 4:33:37 P.M. Eastern Daylight Time,
[email protected] writes:
(http://community.verizonwireless.com/)
(http://www.verizonwireless.com/b2c/index.html) (http://www.verizonwireless.com/b2c/explore)
(http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewSho
pIndex) (https://wbillpay.verizonwireless.com/vzw/nos/topline.jsp)
(http://support.verizonwireless.com/clc/)
Re: Gallery and Backup Synch
created by Verizon Wireless Customer Support
(https://community.verizonwireless.com/people/vzw_customer_support) in Samsung Galaxy S III - _View
the full discussion_
(https://community.verizonwireless.com/message/875415#875415) -
Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Author>MYDOMAIN\SERVER1</Author>
<SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
<CalendarTrigger id="Trigger 1">
<StartBoundary>2014-07-14T21:00:00</StartBoundary>
<Enabled>true</Enabled>
<ScheduleByDay>
<DaysInterval>1</DaysInterval>
</ScheduleByDay>
</CalendarTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>S-1-5-18</UserId>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>true</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>false</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
<UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<Exec>
<Command>%windir%\System32\wbadmin.exe</Command>
<Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
</Exec>
</Actions>
</Task>
Thank you in advance for your feedback.Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power? -
The DB version is 11.1.0.7.
The "CATALOG START WITH" not only catalog backup set that are not in the RMAN catalog, but also catalog a second copy for files that are already in the catalog.
Files are not a second copy; they are the same file in the same directory.
Having two copies in the catalog, through an error when deleting explicitly the backups.
We have to add the force clause to avoid the error.
RMAN> delete FORCE backup tag 'offsite-1';
The force clause ignores any I/O error.
The delete is part of our scheduled offsite backup script, which returns a false positive error when the force clause is ommited.
I don't want the force clause, in order to be notify if the backup set that are expected to be on disk are no more there, e.g., if someone had deleted files manually at the OS level bypassing rman.
Is there a way to only catalog backup set not in the catalog?
or May be remove the copy #2 entry from the catalog?
Find bellow a test case example:
RMAN> list backup summary TAG 'OFFSITE-1';
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
12 B F A DISK 11-JUN-13 09:41:45 1 1 NO OFFSITE-1
13 B F A DISK 11-JUN-13 09:43:31 1 1 NO OFFSITE-1
14 B A A DISK 11-JUN-13 09:43:33 1 1 NO OFFSITE-1
15 B F A DISK 11-JUN-13 09:43:34 1 1 NO OFFSITE-1
RMAN> CATALOG START WITH 'C:\backups\offsite_disk\IBISdatabase\scheduled_offsite';
searching for all files that match the pattern C:\backups\offsite_disk\IBISdatabase\scheduled_offsite
cataloging done
List of Cataloged Files
=======================
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\06OBTJEP_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\07OBTJI3_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\08OBTJI5_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\09OBTJI6_1_1
RMAN> list backup summary TAG 'OFFSITE-1';
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
12 B F A DISK 11-JUN-13 09:41:45 1 2 NO OFFSITE-1
13 B F A DISK 11-JUN-13 09:43:31 1 2 NO OFFSITE-1
14 B A A DISK 11-JUN-13 09:43:33 1 2 NO OFFSITE-1
15 B F A DISK 11-JUN-13 09:43:34 1 2 NO OFFSITE-1
RMAN> DELETE BACKUP TAG 'OFFSITE-1';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
24 18 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 <<--- same file
30 18 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 <<--- same file
25 19 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
31 19 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
26 20 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
32 20 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
27 21 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1
33 21 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 RECID=24 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1 RECID=25 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1 RECID=26 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1 RECID=27 STAMP=821470357
Deleted 6 objects
RMAN-06207: WARNING: 4 objects could not be deleted for DISK channel(s) due
RMAN-06208: to mismatched status. Use CROSSCHECK command to fix status
RMAN-06210: List of Mismatched objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1Hi JM,
Your demo with Oracle 10.2.0.5
At line 36 you answered "No" to "Do you really want to catalog the above files (enter YES or NO)?".
Just repeate your demo and answer Yes.
Even if he might have replied with "YES" then also, the RMAN search for the files which it can recognize as a valid rman backup file. Else it would show the list of files which are not recognized by RMAN as a valid file.
RMAN> catalog start with '/home/oracle/scripts';
using target database control file instead of recovery catalog
searching for all files that match the pattern /home/oracle/scripts
List of Files Unknown to the Database
=====================================
File Name: /home/oracle/scripts/RMAN_BACKUP.sh
File Name: /home/oracle/scripts/rman_clone.log
File Name: /home/oracle/scripts/Db_Refresh.sh
File Name: /home/oracle/scripts/rman_erp.scr
File Name: /home/oracle/scripts/RMAN_14FEB.log
File Name: /home/oracle/scripts/nid.sh
File Name: /home/oracle/scripts/Full_Clone.sh
File Name: /home/oracle/scripts/rman_staging.scr
Do you really want to catalog the above files (enter YES or NO)? yes
cataloging files...
no files cataloged
List of Files Which Where Not Cataloged
=======================================
File Name: /home/oracle/scripts/RMAN_BACKUP.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_clone.log
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/Db_Refresh.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_erp.scr
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/RMAN_14FEB.log
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/nid.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/Full_Clone.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_staging.scr
RMAN-07517: Reason: The file header is corrupted
About the RMAN catalog, it will not catalog the same file twice. It will only catalog the files which are not known to the database.
See this demo. (/backup/RMAN/STAGING/ is the location where all the backup pieces are.)
RMAN> catalog start with '/backup/RMAN/STAGING/';
searching for all files that match the pattern /backup/RMAN/STAGING/
no files found to be unknown to the database
This was the location based test, Another demo showing piece by piece catalogging .
RMAN> list backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1323 1321 1 1 AVAILABLE DISK /backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00
RMAN> catalog backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
cataloged backup piece
backup piece handle=/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00 RECID=1324 STAMP=821717283
RMAN> list backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1324 1321 1 1 AVAILABLE DISK /backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00
Hope its understandable, if any query please revert.
Happy to Help.
Thanks and Regards,
Prashant -
Itunes could not back up iphone because backup could not be saved on the PC
I am not able to backup my iphone. After the last step it always comes up with this message "itunes could not back up iphone because backup could not be saved on the computer" . I tried all solutions mentioned earlier like changing time zone, deleting previous backups & manually backing up, changing user admin, running itunes as an admin, etc .
I guess my problem lies in the Camera roll. I deleted all my pictures in it and I am left with 3 images. I guess they are corrupt as I am not able to delete them. When I try to delete them from iphone gallery, it crashes. When I try to delete it from external devices like when its connected to PC, same problem occurs, cant delete these 3 pictures. I guess they are corrupt.
Can you please let me know what to do.I dont know want to restore to factory settinsI doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction. -
I used a backup hard drive for my previous PC, but I have not done a backup on my MacBook yet, which I got this summer. When I hooked it up to my computer, it started the backup fine, and then my computer went to sleep, and so I closed it to let it back up overnight. The next morning I saw that it had been interrupted, and that an error occurred; the backup could not be completed because there was an error in creating the backup folder. I'm not sure what to do now because my data has been erased off of my hard drive now to prepare for the backup on my MacBook, but will I be able to use this hard drive again? Will the error message always come up? Is there anything I can do to fix it?
I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation. -
Can't synch Notes or Contacts from iPhone 3GS after upgrade to iOS5
After I upgraded to iOS5 on my iPhone 3GS, I no longer can synch Notes and Contacts from iPhone to Outlook or iCloud. Calendar synchs OK.
After 2 hours with Apple Support, which was great, we figured out the issue. 1-800-my-iphone. When I upgraded to iOS5 and started using the iCloud, I was unaware that my previous synching settings were still set to Yahoo.com where I had been sycning wirelessly in the past. So the Apple support tech showed me that I had multiple accounts in both Notes and Contacts. I had iPhone, iCloud, yahoo, Outlook accounts and my default settings on the iphone should have all been set to icloud. Syching was occuring, but not in icloud. It took a little manual conversion of some Notes and Contacts into the icloud folders in Outlook, but now everything works and I only display and use the iCloud accounts in Notes and Contacts. Apple realizes that this is an issue for those of us that were previously using Yahoo and equivalents for wireless synching and they provded my support free. Usually they charge $27. All is well.
-
Why won't my iPhone sync with my computer? When I hook the phone up to iTunes I get a message that reads: iTunes could not back up the iPhone because the backup could not be saved on the computer. This never happened before.
Hey Janice Lucoff,
Thanks for the question. It sounds like you are experiencing issues backing up your iPhone 4s in iTunes, which is causing issues finishing the sync of your device. The following resource should help resolve your issue, as it refers to the exact error message you described:
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/TS2529
Thanks,
Matt M. -
Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.
Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.
Maybe you are looking for
-
Mac Mini: DVI+TOSlink- HDMI Adapter, still fiction?
Hello I've been studying for a while the best solution for connecting my early 2009 Mac Mini to my LCD TV and Blu-Ray 5.1 System. I didn't took long to figure out the "Mini-DVI->HDMI Adaptor for video" and "Mini-TOS->TOSlink for audio" scenario. The
-
Hello, I've a interface RFC to File (.txt). The name file is dynamic. In message mapping we have a target field only for file name (i haven't can mapiing with other fields because all target fields are mapping with source fields). My problem is file
-
IPhoto Batch Change = Can't See Photos
Hello, Can someone please tell me what I can do to save my photos from being lost? This is what happened: I was trying to back my photos up and needed to change the names of a bunch because they had duplicate names, therefore I used these instruction
-
Front Row won't play movie trailers and previews
When I try to access the apple movie/Tv trailers through front row I get the message: "the selected video could not be played. The format was not recognized" Front Row and iTunes are both updated to the latest version- My Firewall's set to allow all
-
TopLink issues using Weblogic Server 8.1 SP3 and MAC OS X with Oracle 9i
Hi, I have successfully deployed my EJB (entity bean) on WLS 8.1 (the generic version) on Mac OS X. I also have installed Apple jdk 1.4.2 and everything seems to be ok. The server came up without any problem and can connect to my Oracle DB. I verify