PSE7 - Can the 'JPEG Options' window be disabled?

I'm running PSE7.
When doing a save of a JPEG file I always get the JPEG Options window where
I can set the compression level, etc. Once I have that set like I want it, is
there a way that I can stop that window from popping up until I make
some change to re-enable it?
Thanks!

Unfortunately, PSE doesn't provide any way of setting those defaults. I use a program Quick Macros 2 to record a sequence of keystrokes (a "keyboard macro"), which I can invoke using a single function key. For example, I have a macro that changes the bit depth from 16 to 8 and then saves as a JPEG.

Similar Messages

Can the folder C:\Windows\Cache\Adobe Reader 6 and the files it contains simpley be deleted?

My daughter is running Adobe Reader 9.4.5 and Adobe Flash Player 10 Active X
on a Dell Dimension 4400 system with
Windows XP Home Edition version 2002 Service Pack 3.
During a full system backup using Seagate DiskWizard version 11.0.8326
each time folder C:\Windows\Cache\Adobe Reader 6
is accessed the pc freezes with the Blue Screen error
IRQL NOT LESS OR EQUAL ERROR 0x0000000A
(0x00000166, 0x00000002, 0x00000000, 0x804E5443).
Each time the Adobe Reader 6 folder is opened manually, the system presents a spinning
CD icon superimposed on the cursor and attempts to access the CD drive.
The access ultimately fails since there is no CD loaded because there is no intent to install
anything at the moment.
Through a manual process of backing up each of the the files in the Adobe Reader 6 folder
individually, one at a time, I strongly suspect the problem file to be instmsiw.exe.
Can the folder C:\Windows\Cache\Adobe Reader 6 and the files it contains simpley be deleted?
Are there any registry entries or issues that must be addressed before deleting these files?
What is the best way to free up space on the C drive that is apparently being occupied by
files left over from the install of a prior version of Adobe Reader?
The folder C:\Windows\Cache\Adobe Reader 6 contains the following files:
0x0409.ini                        5KB          Configuration Settings        2/18/2003
abcpy.ini                          2KB          Configuration Settings        3/24/2003
Adobe Reader 6.0.msi      2198KB     Windows Installer               5/19/2003
Data1.cab                       23334KB    WinZip file                         5/19/2003
instmsia.exe                   1669KB      Application                        3/11/2002
instmsiw.exe                  1780KB      Application                        3/11/2002
Rdr60ENU.itw                 16KB          ITW file                            5/11/2003
Rdr60ENU.mst               4KB            MST file                           4/16/2003
Setup.exe                      212KB        Application                        5/19/2003
Setup.ini                        2KB            Configuration Settings        5/19/2003
Thank you for any assistance you can provide.

Go to Add/Remove Programs in Control Panel and uninstall Adobe Reader 6. That version poses a security risk to your system and should be removed a.s.a.p.
After you remove it, reboot and then delete the "Adobe Reader 6" folder at the location you mentioned above.
Then go to http://get.adobe.com/reader/direct/ and download version 9.4
After that installs, download the latest patch for it by opening the program, then go to Help | Check For Updates.
As a precaution, download the free version of Malwarebytes from here: http://www.malwarebytes.org/products/malwarebytes_free and then run a full system scan.

Where did the .jpeg option go when saving?

I used to be able to save a .cr2 file that I had edited in the .jpeg format. For some reason that is no longer offered as an option in the drop down menu when I use 'save as'. Where did the .jpeg option go?

It's not there because the CR2 image is using 16-bit color.
Either:
Change the bit depth in Camera RAW to 8-bit before opening it in the Editor.
In the Editor, use Image...Mode...8 bits/channel.
Ken

HT202157 Can the Apple TV voice be disabled

Can the Apple TV voice be disabled?

Yes that fixed the problem, thank you so much. I was muting the sound as it was so irritable to hear!
I appreciate the quick response!

Printer doesnt appear in the print options window when printing from an application like word etc

Ok this topic is all over the help forums but I have a couple of different observations not previously covered and all remedies that have been posted and worked for most havent worked for me
First of all the Printer used to work with USB or NET connection and then suddenly unexpectedly stopped working. I cant say with 100% conviction whether this was when the upgrade to windows 7 occured or not
things I have tried:-
I have used the hp install wizard
I have a downloaded the windows 7 update.
I can ping the device
I can print a test page.
The icon appears in the device and printer window but with an exclamation mark.
I have tried NET STOP SPOOLER / NET START SPOOLER.
I can scan docuemnts OK
here is the part that I believe appears to be different from the other case on the forum.
If I open a word document and select print the printer preferences dialogue window opens but no printer is visible to select. When I select add printer it shows my network then double clicking this opens a window showing a printer icon but its a previous version?? so when I select it as a printer to add nothing happens and it still doesnt appear as a selectable printer in the printer preferences pop up window. So doesnt print any thing
Im lost for any other ideas to try

I had already tried this and it didnt work on your advice I repeated the process with same results it appears in devices list but with an exclamation mark but trouble shooter fails to find any problem
I refer you to the things tried and status in my first post i.e. I can ping the IP, I can scan. So my thoughts are now it must be something on my PC side that is the issue and not the printer or printer software.
Could it be a security level issue that's the reason why manual selection of add printer comes back access denied ??. Possibly I need admin login. However I am the admin and single user of my PC anyway so I should have access.
or some other PC setting why it doesnt see the printer in the printer settings when printing from an application ?

Can the JPEG be separated from the DNG?

In PSE11 I saved a DNG and embeded a full size JPEG. Is there anyway to separate the JPEG? I really don't want to have to create another JPEG.

gegjr wrote:
Mr. Cole,
Call me "Rob", please. Mr. Cole is my father , it's also what my grade school teachers used to call me when I was bad .
I am intimately familiar with Lightroom, although even today I learned something new about it.
Lightroom can embed or update the jpeg preview in a DNG, but can't (or won't, depending on how you look at it) read/display/import them...
It *thinks* of the embedded jpegs as being for "outsiders" - not necessary in Lightroom, since it's primarily a raw editor - it writes them, so why would it need to read them? i.e. the embedded jpeg should look exactly like the raw does in Lightroom after editing, which granted may be different than immediately after import.
FWIW, you are among many who would like the capability to display embedded previews, perhaps add your vote here:
http://feedback.photoshop.com/photoshop_family/topics/lightroom_capability_to_display_embe dded_preview
I voted for it too - I'm just trying to explain what is probably the rationale for the current handling.
In the mean time, there is a solution:
RawPlusJpeg - will extract the jpeg previews from the DNGs and import them into Lightroom.
(I'm not sure if the icc-profile is always correct, but so far, they've been looking right - please let me know if you have any color issues).
Cheers,
Rob

Zoom function not working correctly in the playback options window.

When selecting the start and stop timepoints for creating a text file in signal express I can't zoom in on selected areas. When I use the zoom function the trace just dissapears.
Could anyone help me with this?
Cheers.

Is this a LabVIEW or a signal express question?
(You post in the LabVIEW forum but only mention signal express. There is a dedicated signalexpress forum. If this is a LabVIEW question, please explain in more detail.)
LabVIEW Champion . Do more with less code and in less time .

Can the iCal alert window be resized?

...so I can see all its alerts?

Very helpful. I started with vm ware to create a pseudo drive but could not import win 7 over home network. mac has no immediate way to connect to network without adapter, and has no cdrom. So i used boot camp to create partition, then made a bootable win7 iso file on a memory stick using win 7 usb/cdrom download tool from microsoft, and rEFIT to get mac to boot from the mem stick into the dos partition. Then i ran vm fusion to import the win 7 partition as a virtual machine. OSx and win 7 run side by side.
Seems from what you say that sizing cannot be accomplished without deleting partition and starting over. If I start over and just run vm fusion to create he win7 virtual machine, not sure how I would bet the minimum win 7 os into the ac. Perhaps vm will boot from the mem stick using refit. Do you know?

When using photoshop do i use the jpeg version of my photo or the raw version - as I have both

When using photoshop do i use the jpeg version of my photo or the raw version - as I have both?
Please can someone advise?

If you use the RAW version to edit with PS you'll have to save the results to the Desktop and import it into the library as a new file.
If you edit the jpeg version must make sure to flatten the image before saving normally so the extension remains as a jpg file. Here's some more info on that:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note 1: screenshots are from PSE 10
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Why can't we simply have an option to enable/disable Javascript on sites again in the settings for Firefox 27? Suddenly my Gmail attachments won't open. Gmail.

Suddenly my Gmail attachments have stopped opening, and I receive the message: JavaScript must be enabled in order for you to use Gmail in standard view. However, it seems JavaScript is either disabled or not supported by your browser. To use standard view, enable JavaScript by changing your browser options, then try again.
I found a Mozilla support thread where it was explained that Javascript has been turned off for a while in FF. OK. Then there was a complicated answer about how you could still turn it back on by typing in a config code into the address bar. What? Or, you could download an extension to do that for you. Why?
Please-- if you really feel like users can't be trusted, and Javascript must be turned off, at least bring back the ability to enable/disable Javascript on a per site basis in options, without having to know code. It's Gmail.
Thank you.

There is nothing on that thread that says Javascript is turned off by default. to quote:
"In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on. "
The UI checkbox to disable Javascript was removed, but the option still exists in about:config (which isn't code btw, it's just preferences), nor was Javascript turned off by default, in fact the opposite is true, it is enabled by default with the option to disable it made a little more difficult to find, as only advanced users need to disable Javascript.
Please try to clear the cache and cookies for gmail, let's see if those are causing problems. [[Delete cookies to remove the information websites have stored on your computer]], [[How to clear the Firefox cache]]

How do I re-enable the Markzware Q2ID conversion options window?

I'm converting documents from Quark to InDesign using Q2ID. I want the option of converting plain text across from Quark. In InDesign, the only menu options I have for Markzware are Q2ID>Convert Quark document and Q2ID>Help. I've gone to the Markzware online help, and found that Q2ID has a popup Conversion Options window that allows you to convert files without styles. Unfortunately, this window has been disabled. Can anyone help me re-enable this popup window. Markzware help instructions for re-enabling this window follow. Unfortunately, I don't have an Options selection in my Markzware/ID2Q Menu. Can anyone help?
Once you have set the don’t show option, in order to disable it:
1. Go to the Markzware/ID2Q Menu
2. Select Options
3. This will bring up the Conversion Options window
4. Uncheck the don’t show checkbox
5. Click OK
Now, whenever you select an InDesign file to convert, the Conversion Options window will appear.
Read more: http://markzware.com/support/manuals/id2q-manual/id2q-conversion-options-window/don_t-show -option/#ixzz2tmY9PfJ1

Unfortunately, this doesn't work. I think there must be hidden commands in the converted file coming from Quark or some other application that prevent the style assignment from working. Some of these documents appear to have been converted multiple times. Worst case, from FrameMaker to Word to Quark, then to InDesign. The imported styles seem to be hopelessly garbled. Even deleting the style, creating a new one and assigning it to the paragraph doesn't work. My conclusion is I must re-type the documents from scratch because the behaviour of converted files is unpredictable. Sometimes a selection will take on the attributes of the assigned style, sometimes it won't.
Any thoughts?

PSE4. Save as/JPEG Options/Quality. Can I select a default=12?

XP Pro, 3GB RAM
Due solely to carelessness, I have several times overwritten a JPG file of high resolution with one of low resolution, using the JPEG Options dialog window. This has happened when the setting is 3 on the scale of 0 to 12, but I did not select the "3" setting. Something in the PSE4 logic must set it, I presume. When I am closing a batch of images, and it is preset to 3, I manually set it to 12, and for several successive files, some logic resets it back to 3. After several close/save instances, the logic seems to get it that I want 12, and it quits resetting it to 3. (Now retired, I have decades of experience as a professional computer programmer, so I know that there must be some code that sets the quality to 3.)
I have often been able to recover from my overlooking the quality = 3 setting, by rescanning, reloading from my camera memory card, etc., but sometimes it is too late. I want to be able to set a "preference" for the quality to be 12, all the time, obviously with the option to reduce it when I want. Does this functionality exist in PSE4?

> I want to be able to set a "preference" for the quality to be 12, all the
> time, obviously with the option to reduce it when I want. Does this
> functionality exist in PSE4?
I don't think so. PSE warns you though, when overwriting a file. That may
be a good opportunity to reset the quality. Which brings up another point;
the original image file should really not be overwritten, but kept like a
"negative", so one can go back to it if an accident like you described
happens.
Juergen

Thank you for fixing the options window in Verson 11.0.1

Thanks for the fix to changing the media style and other feathers in the options window. Greatly appreciated! A suggestion to improve would be to have a podcast created in GarageBand carry the appropriate options window info with it when it is sent to iTunes (but still allow those to be changed). Thanks again.

Ckick on View > Show Status Bar and the grey bar will re appear

Firefox carshes at startup no settings have changed. Latest version of FF. I just rebooted the computer from windows updates.

After reboot and installing windows updates etc. FF crashes all the sudden. No idea why. I have deleted all profiles completely, unintsalled ran ccleaner and reinstalled. nothing. Any ideas? I don't think windows updates effect FF. FF will not even open in safe mode and rests d not do anything all I can do is restart and close.
Thanks I appreciate anybody who can help. I have current anti malware and my pc is clean. Windows 7 64 bit. I use Webroot and that is temporarily disabled as I try to solve this.

Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!

How can we use this Windows Genuine page ?

How can we use this page after the Firefox developers remove the "Enable Java" option?
Now I've downloaded this tool to check whether the Windows Genuine or not! But kept get the error message while installing the application!

The javascript option is NOT disabled by developers.
*Maybe this helpful explanatory article is worth reading <br />http://kb.mozillazine.org/JavaScript_is_not_Java
Maybe it helps if you give the links to the tool and pages you are talking about, along with a screenshot of any error messages.
* [[How to make screenshots]]
* [[How do I create a screenshot of my problem?]]
Background info on what I understand you may be interested in: WGA.<br /> (WGA is renamed Windows Activation Technologies & I have also heard it mentioned Windows Genuine Article)
* http://en.wikipedia.org/wiki/Windows_Genuine_Advantage
* http://support.microsoft.com/kb/892130 ''" Description of Windows Genuine Advantage (WGA)"''

PSE7 - Can the 'JPEG Options' window be disabled?

Similar Messages

Maybe you are looking for