PSE7 Organiser with new C: drive - Win XP Home SP2.

The recent slow-down of my C: drive (160GB, approx 75% full) has persuaded me - whether or not it's the cause - to order a new larger drive to replace the old one, and I gather I can copy everything across to the new one relatively easily.
Now I appreciate my previous Organiser back-ups - full ones, on an external HD - won't be any use for reinstalling on the new C: drive, and will therefore be sure take a new one ASAP afterwards, but if the new drive as a different ID or whatever, is that also going to cause difficulties with the Organiser's Catalog before I even get that far?
Pushing 27000 image files, and I don't really want to have to write all the tags into such of them as will take it!
And I can't say I'm keen on using the Organiser to "move" them all to the MyBook either - especially with the C:drive running so slowly at present - but might that be the only way to go?
TIA - Peter

John - thanks as ever!
The drive I've ordered is a WD Caviar Blue 250 GB ATA (65 Euro including delivery, for 8000 times the storage of my first luggable!), and I was thinking that after 5 years the original Maxtor now deserves a peaceful retirement - so once Acronis True Image has done it's job, I'll be disconnecting that one for good.
One question please... am I right in thinking that if I DON'T leave the old drive in place afterwards then your remark "You'll have to change the drive's volume serial number (ask for details if that's what you want to do)" won't apply?
I took a full Organiser backup on the external drive on Sunday and haven't changed anything since - the Editor's too slow - though the 'remove the external drive' point is noted and I'll be sure to do that!
Thanks again, Peter

Similar Messages

Trying to setup RAID 1 with new SATA drives on xserve 2009 model

Trying to setup RAID 1 with new SATA drives on xserve 2009 model
I have an Xserve rack mount model Xserve 2.26 Quad Core (EMC# 2279) with an Apple RAID card, 24GB RAM (running 10.9 Server software)
Purchased two Western Digital 1TB SATA III 7200 RPM 64MB Cache Black WD1003FZEX drives
It came with three 160GB SATA drives. I'm leaving one of the original 160GB drives for the OS, but I want to replace the 2 other drives and set it up with RAID 1 (mirrored). I bought 2 brand new Western Digital 1TB SATA drives and formatted them on another Mac through Disk Utility with Mac OS Extended (Journaled) formatting. I then placed the new drives in the Xserve and booted it up. After I login it immediately gives me 2 error windows saying...
"Apple RAID Card
The Apple RAID Card installed in your system requires your attention."
It has two buttons underneath this message allowing me to either select 'Ignore' or 'Open RAID Utility'
I've tried to RAID the drives the Disk Utility and through the RAID Utility with no success.
I have both drives mounted on the desktop, as separate drives, but I really need to set these up as a RAID 1.
I've been reading other forums, where others have been able to get this to work by using a jumper on certain pins (5 & 6)of the drive to back down the transfer rate to 1.5 Gb per second. I tried that and it didn't work for me. Maybe I used the wrong pins -- I just don't know. I'm also wondering if there is some Apple firmware that is required on these drives? I'm asking for help from anyone who has gone through this same issue. Thanks in advance.

UPDATE -- I had an issue with the RAID card battery, it was dead and I have since replaced it. But I am still unable to setup the RAID 1 drive configuration. Does anyone know if it has something to do with the faster transfer rates on these new drives. Maybe they need to be clocked down with certain jumper settings on these Western Digital drives? Or am I fighting a losing battle because these drives don't have Apple firmware? Any help would be appreciated. Thanks.

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

Boot Problem with new SSD Drive on CQ60-409SA

I have just replaced my HDD with a new Sandisk 120GB Extreme 11 SSD.
All went OK with no problems installing Win 7 Ultimate and much faster search time, etc..
The problem I have is that when I boot the laptop from cold, i.e switch it on for use, the SSD is not recognised and I just get a Black screen with Flashing cursor top left corner, but if I then press Control-Alt-Delete, the system Reboots, and then boots into windows no problem.
I am trying to find out if I can Access BIOS Advanced Options, if I press F10 during boot I only get Options like Change Boot order, and not more Advanced Option to change Drive parameters, etc... and F2 does not run Diagnostics for SDD.
Any help would be greatly appreciated as I am very pleased with the performance increase the SSD drive gives to Windows and Boot itme except for having to boot twice.
Best regards,
This question was solved.
View Solution.

No worries.
What year model is your notebook?
About your request for the Advanced options, unfortunately that is not possible with a BIOS supplied by HP.
You can, if you don't mind taking the risk, go to a BIOS Mod forum and look for a modified BIOS for your notebook there. The modified BIOS will have advanced options.
Have you tried the Solution and Update finder on the Support download drivers page for your notebook? It says that it will find missing drivers.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

SYNCING IPHONE AND ITUNES WITH NEW HARD DRIVE

My hard drive crashed on my mac book pro and I had to replace it with a new one. I'm trying to get new music onto my iphone that I purchased thru Itunes, but it is saying that only one computer can be used. This is the only computer that I used for the library, but now there is a new hard drive in it. Obviously I do not want to lose the music on my iphone and I'm curious how or if I can get around the message saying that if I want to sync to a new computer that it will erase the prior library. Please advice because I would like to update my iphone as soon as possible.

Connect the iPhone and choose Transfer Purchases from the dialog box which appears or the File menu in iTunes. Do NOT sync the iPhone until you've completed this task.
(52902)

Recovery discs do not work with new hard drive

Hi I have come here desperately seeking help as I am not too knowledgeable with the workings of computers and I have spent an incredible amount of time just trying to get my laptop to some level of functionality. I purchased a HP Envy and it had a corrupt hard drive which would not work from day one, laptop was new. After a year of constant pressure on HP they finally decided to replace it and let me choose any laptop so I went with the Beats Envy 14 as it was the best one offered from the selection. Low and behold the thing would not work properly from day one, again my brother who is much more of an expert said that there was definitely a hard drive issue so for the past 3 years I have put up with a computer that constantly crashes with BSOD, where I have lost data on numerous occasions (only so often I can back up), that I have had to constantly reset the thing using HP recovery discs, and that generally cannot cope when performing multiple tasks. HP are most certainly shocking builds from my experience. Then just last week the hard drive just craps itself and the laptop no longer will boot up. I took it to a guy to get it at leYst working again so he has installed a new hard drive but with an old version of Windows 7. I want to go back to the Windows version I was akin to on the HP recovery disk , and essentially have it all set up as before except for now having a workable hard drive however I get the message: "This computer is not supported by the System Recovery Discs.You will not be able to continue to recover this system with these discs.Error: 0100 - 3385 - 3078" I also tried out of interest to load my old Windows 7 disc I had and XP but had no success. Tried booting from startup etc and various things suggested on help forums. Please tell me I am not stuck with this version of windows. Whilst the discs included Windows 7 it was a totally different version, this home premium one is terrible. Any help/advice would be gratefully received. Thanks

no they were both 500gb. I read about that already, I heard about creating a partition for recovery etc but this is all a bit above me , as I said I am not very technical when it comes to the working of a computer. These discs worked perfectly before but now with the new hard drive will not load at all. I essentially hate the Windows Home Premium verions the guy who fixed it put on, whilst the discs had Windows 7 on them the icons were way smaller, the desktop neater, the buttons different, everything was a lot more modern and I was used to it. This version looks like something from the 90s, have to constantly adjust size of Mozilla when browsing as it is huge. I have my own version of Windows 7 on another disc but the hard drive will not let it load either........considering waiting for Windows 10 but again unsure if this new hard drive will even let that update Thanks

Time Machine takes very long time to back up with new large drive

I started using Time Machine on my 17" MBP about a month ago. I was using a 250 GB Samsung drive. When I discovered that TM will back up other external drives (I have several firewire pocket drives), I purchased a 500 GB Cavalry drive with USB 2.0 and eSATA connections. The first backup of my MBP drive (about 85 GB) took several hours (4-6?). I backed up one of my pocket drives (about 60 GB), which took 3-4 hours. Then, when I changed the back-up drive in Time Machine to the new 500 GB drive with the eSATA connection, I stopped it after an hour, because only 2 GB had been backed up. I erased the drive and restarted using the USB connection. It backed up 3 GB in an hour. So, now I'm back to using the original back-up drive. I've performed benchmark tests on all drives (the Samsung 250, Cavalry USB and eSATA 500 GB, and the MBP internal drive) with Xbench. The USB speeds on the Samsung and Cavalry drives came out about the same with a slight edge to the Cavalry drive. The eSATA connection with the Cavalry drive operated at over twice the speed of the USB connections and at about twice the speed of the MBP internal drive (which is a 1.5 Gb/s SATA drive). Basically, I can't figure out why Time Machine takes so incredibly long to back up when I switched to the new drive. Any ideas?
Jeff

It took me 20 hours to backup 32GB out of 65. I don't know why. Using carbon copy clone to download to another backup drive I did it perfectly in about 30 minutes. I expect that those appllications which show applicatiions are at fault and will try later getting rid of apps such as F-10 and pathfinderfor the first download. I have no idea why this is so slow. Everything is so slow.

MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
Both hard drives have OS X 10.9.4 installed
If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

So after switching the internal SATA cables from each computer, now we have
His computer, with my SATA cable:
1) Worked with every hard drive!
My computer, with his SATA cable:
1) Works with 1 TB Toshiba hard drive
2) Works with 500 GB Seagate hard drive
3) Works with my original hard drive
4) Flashing folder with question mark with his old hard drive
So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

My late 2012 mac mini boots slow with new ssd drive

So here is the situation. I purchased a 128gb ssd drive, installed it a usb enclosure, formatted it to Mac OS Extended (Journaled), cloned it with carbon copy cloner 3, used the option key during boot up and selected the ssd drive and it booted my mac mini and it functioned perfectly. I than tested it for dozens of reboots and it worked fine. I then took apart my mac mini and removed the original hard drive and installed the new ssd drive. When I boot to the ssd drive it still takes 47 to 53 seconds just like the old drive. Aren't ssd drives supposed to be a lot faster?
My solution or tip is as follows; The reason it takes so long to boot is because the mac mini doesn't know you replaced the old drive and it is looking for it during the boot process. Finally it can't find the drive so it boots to the ssd drive. All you have to do to correct this is click on "system preferences", select and click on "startup disk" and select your ssd drive and click on "restart". After these steps your mac mini will now boot in about 17 seconds. Issues solved.

Yes, my solution fixed the issue. I went from a 47 to 53 second boot time to a 17 second boot time. The ssd drive is significantly faster than the original drive that came with my late 2012 mac-mini. This is my first post and I wasn't sure how to post this as a tip. I have another tip regarding usb 3.0 hubs.

Permission issues with new hard drive

Apple installed a new hard drive on my fairly new (june2012) MBP. The only backup I had was the time machine backup from the old MBP that I originally migrated from. Apple said no worries - I can restore from that so I did.
Today I bought an iphone. (I was a hold out, I'm all things mac since the 80s except the phone). I went in to clean up my Contacts before syncing the new phone to my MBP and I couldn't delete and contacts or groups. So I did a "get info" on my contacts ap and it didn't even have (user/me) on the list as a user. I added myself, gave me the read and write" capability and still can't make the needed changes, deletions or anything in Contacts, so I decided to check permissions using Disk Utility. I repaired permissions, and just to be sure verified permissions again. What a lllloooonnnggg list of issues and nothing has changed. Hit "repair permisions again and it is taking f o r e v e r. Now I am Verifying Disk to see what it says. No problem. Verify Permissions again - did it faster, but still a bunch of problems found. Repaired permissions again - same old thing - says its repairing, but I seriously doubt it. Am I supposed to do this over and over again?
Suggestions???

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

Replaced Hp with new hard drive but now i cannot install windows 7 recovery disks

Ok, so my laptop is a hp pavilion dv4-2165dx that has a broken screen and sometime after best buy tried to fix it the hard disk blew. I bought a new hard disk and put it in the computer and i got the official recovery and installation disks for windows 7. The hard drive is recognized by the computer and does start the recovery manager but it gets to 1% and does not go further. I let it run all night and the next morning it said that the cd failed. Did it fail because i have to connect an hdmi cord to my lg tv to see anything? Or was it because of something else?
I researched and found that with a new hard drive i will have to partition it and then format it to work with windows 7.
My question is, if the computer doesnt boot or let me use windows how can i partition and format the new hard disk? I have an older hp laptop as well that works efficiently in regard to its age (7) yrs. i wonder if i can buy a usb to sata/ide cord and attach the new disk to my old laptop and partition/format it there? Idk

Hello CaptianNike, welcome to the HP Forums.
I see that you're trying to install Windows 7 on a replacement hard drive. I will try to assist you with this.
You definitely could use another computer to format and partition the drive. I'm not certain about the cables you've mentioned though (looked with goolgle and you can get usb to sata cables). If the computer is a desktop you should be able to connect it internally to just do the format/partition.
If the recovery disks worked correctly, then you should have the option to do the format and partition via Windows. This could be an indication as well that there's an issue with the disks.
Which leaves you with the option of obtaining another set of disks to try, or trying to partition first then installing. The easier would be the latter.
I hope this helps.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Wanting to upgrade Sawtooth 400 with new hard drive and more memory

Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
Thanks for any advice and/or suggestions.

Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

How to Replace existing Hard Drive with new Hard Drive, while keeping old files

Hi All,
I have recently replaced my hard drive on my Macbook Pro, with a new hard drive. The old Hard Drive was 160 GB, while the new one is 320 GB.
What I did before replacing it was clone my hard drive using "SuperDuper". I cloned it to the new hard drive and then simply removed my old hard drive and installed the new one with the clone on it. Then I booted it up and began running it. In fact I am using it right now.
My questions are:
Is this a good practice?
Will this work, without problems, indefinitely?
Is this the prescribed way to upgrade ones laptop hard drive?
The reason I did it this way was because I upgraded to Mountain Lion via the apple store download and I do not have the CD for the OS. So I figured if I could make a bootable copy, that might work. So far everything seems fine, but I really just want to know if this will last for a long time. I plan on also making a partition with Windows on it also, so I was wondering if anyone can comment on that too.
If anyone can comment or give any advice on this topic I would really appreciate it.
Thank you very much!
Cheers.

Every thing is fine except Super Duper does not clone the recovery partition. If you start your MBP holding the OPTION key, you should see the internal HDD and the ML recovery partition.
You can reinstall ML or reclone using Disk Utility>restore.
Ciao,.

IPad won't sync with old iMac with new hard drive.

The new drive recognizes the iMac, and the photos on the iPad were successfully imported into iPhoto, but 2 home videos on the iMac will not transfer. I have tried to manually drag and drop, different cords and ports, over wi-fi, etc... The Summary box says the iPad has never backed up to this computer, but when I try to do that, it tries and then stops with no error message. The Movies tab has the two videos I want to transfer, but the sync button is gray. I have hard rebooted the iPad and restarted the iMac. Also deauthorized and reauthorized the iMac. I suspect that somehow the iPad is not recognizing the new hard drive. Is that possible? Any suggestions? Thank you for your help!

I don't mean the latest version of iOS. I mean the latest version of iTunes on your Mac.
Open iTunes on your Mac. Click Help and then Check For Updates

PSE7 Organiser with new C: drive - Win XP Home SP2.

Similar Messages

Maybe you are looking for