PSE7 "Photoshop Elements could not finish creating your E-Mail message."

Since I upgraded to PSE7 from PSE6 I am no longer able to send Photo Mail using Outlook 2007. I get the message "Photoshop Elements could not finish creating your E-Mail message." Outlook is and has always been my default email client. I do not want to use Adobe's email service.

Hi [email protected],
Please refer to the given link:-
Changing Email Clients in Elements 12
Regards,
Sarika

Similar Messages

"Elements organiser could not finish creating your mail message"

I am using Windows 8.1, PSE12 and have Outlook(desktop) as my default email program, but I keep getting the same message from PSE12 when I try to share an image by email.
can you help?

Hi [email protected],
Please refer to the given link:-
Changing Email Clients in Elements 12
Regards,
Sarika

Could not initialize photoshop elements could not initialize ACE implementation

Hi,
Hoping somebody can help.I have Adobe photoshop elements 2.0 (i know its pretty old).Its always worked well until lately its bringing this message up and not letting me open it : could not inialize photoshop elements could not initialize ACE implementation.
I have been trying to clean up the computer and am not 100% confident at using the computer so im afraid i have deleted or locked something that this program needs to run.
Can any body help?
Erica

Repair does not work on any Windows version of PSE. Try resetting the preferences: Press and hold CTRL, ALT, and SHIFT when launching Elements until you see a box asking if you want to delete the settings. Yes, you do.
Juergen

The sent mailbox could not be created on the mail server.

Complete message says:
The sent mailbox could not be created on the mail server. The local "Sent Messages (mail)" mailbox was created instead. Mail has changed your account's Mailbox Behaviors preferences to use the local "Sent Messages (mail)" mailbox.
I am using a gmail account with my own domain. Any ideas how to fix it?

Menu: Mailbox -> User This Mailbox For
First, select folders of your IMAP account, and map them to different common folders.

Data element could not be created- error mesaage

hi all,
we are getting some wierd error when transporting to quality system. The transport for satrasfer structure datasource etc fails. The transfer structure does not get activated and we get following error message:
DD_DTEL_PUT: Act. parameter ROLLNAME=<space> invalid
DD_DTEL_PUT: Act. parameter ROLLNAME=<space> invalid
Data element for InfoObject BELNR 0DOC_NUM could not be created
Data element for InfoObject BELNR 0DOC_NUM could not be created
if you check the infoobjects data element it is active in that system. And this is not getting solved even if you recollect the trasfer structure and transport it. We have to ask for reimport. But we dont understand why is this happening. We have got this error 4-5 times and only in this system.
Please suggest how to resolve this. if any setting or basis related configuration is missing or what could be issue.
Any help will be rewarded by points.
Thanks and Regards

Hi ,
The problem is probably with the number range for transferstructure data elements.
Number range objects are maintained with transaction SNUM. BI_TSDTEL is
used for naming of transferstructure dataelements. The status must
always be bigger than the highest transferstructure dataelement number.
Please refer to the notes 1009638 and 674818 for further information.
Best Regards,
Des.

The junk mailbox could not be created on the mail server

I'm getting this error message on a few of my clients. Mail.app doesn't seem to want or is not able to create a mailbox on the imap server. I can manually create a whole bunch of folders but for some reason it won't create the junk mail folder. I can't find any errors in the cyrus logs that would indicate a problem with creating the mailbox. It insist on creating a local mailbox for SPAM but i'm not interested.
Any ideas? Google search as well as this forum have come up empty...

I think I just figured this out -- unfortunately, I don't have a solution. I'm having the same problem trying to create the junk mail folder on the server, so I fired up WireShark (a network sniffer) to see if that would reveal anything. Sure enough, it looks like Mail.app is trying to use an invalid name when creating the mailbox. When I try and move a message into the Junk mail folder, here's the IMAP transaction I get, my notes are in brackets:
[... truncated ...]
13.3 CLOSE [Mail.app -> Server]
13.3 OK Completed [Server -> Mail.app]
14.3 CREATE "Junk (Corp Mail Server)" [Mail.app -> Server]
14.3 NO Invalid mailbox name [Server -> Mail.app]
15.3 SUBSCRIBE "Junk (Corp Mail Server)" [Mail.app -> Server]
15.3 NO Subscribe: Mailbox does not exist [Server -> Mail.app]
16.3 LIST "" "Junk (Corp Mail Server)" [Mail.app -> Server]
16.3 OK Completed (0.000 secs 1 calls) [Server -> Mail.app]
17.3 NAMESPACE [Mail.app -> Server]
[... truncated ...]
It looks to me like it's trying to use the name of my mail profile in the name of the Junk folder, and I bet the IMAP doesn't like the (parens) ... looks like a bug to me.
Hope that helps
Swannie

Adobe photoshop elements 4.0 "Attempt To Access Invalid Mail" Message

Hello
Hope you can help?!
Every time I click on my adobe photoshop icon on my desktop I get the message "Attempt To Access Invalid Mail" message.
I have been on numrous forums to solve this problem and have done the following things to try and get rid of it so i can use the software;
1.uninstall and reinstall adobe photoshop
2. remove google chrome
3.tried right click on the incon and tried to check box run as an administrator however the check box is greyed out so no good.
4.shutting down my fire wall on my AVG software then trying to load it- but they failed to work as well.
i cant think of anything else and the forums suggested the above and it worked for some people but didnt work for me.
so please would some compter whiz come up with the solution for me. thank you for your attention on this matter.
regards
Richard Stanley

Which OS are you using? Because there have been some issue with Win7 and PSE4. Try upgrading to PSE8.You can try the trial version of PSE8.

Photoshop Elements 6 not opening jpegs following adjustment.

I am getting the following error message: Photoshop Elements could not complete your request because a JPEG marker segment length is too short (the file may be truncated or incomplete).
This error message has occured with images that I have imported and renamed in Bridge and to which I have made adjustments in Photoshop Elements 6. The images which I have renamed but not resized or adjusted or touched in any way are opening without a problem. Whatever the problem it is doesn't seem to be anything to do with re-naming. This problem has occured previously but because it involved only a small number of files I just re-did them and the problem did not re-occur. On this occasion it's 40+ files so it's time to find out the cause if possible. Help would be appreciated. Thanks - Victor

Your computer may have insufficient RAM. When adding text you are temporarily increasing the file size by adding a new Layer (the text layer) which requires more memory.
Try this:
Add your text, then click Layer >>Flatten image. Then save and press Ctrl+W to close the file. Then move to your next open file and repeat.

Is there a way to fix 'Sent mailbox could not be created?'

I have OS 10.8.5 and am using Mail as the mail program, since November. I have not had this problem before. I have four accounts in mail, iCloud, Gmail, Roadrunner and Earthlink. The main one i use is Gmail. Today i noticed that there was an exclaimation point next to my Gmail Sent mailbox. i opened the mailbox and it showed only one sent message that i sent earlier today. There should have been a few months of mail in the mail box, maybe 30 to 50 messages. i clicked on the exclaimation point and the message said:
The Sent mailbox could not be created on the mail server. The local "Sent Messages (Gmail) mailbox was created instead. Mail has changed your account's Mailbox Behaviors preferences to use the local "Sent Messages (Gmail)" mailbox.
i don't know what this even means. My other account mailboxes have their mail in them, only the Gmail mailnbox is not created (although it does have that one message in it). There wasn't anything different i did that would change any preferences that i know of. I see the Gmail Sent messages mailbox at the bottom of the mailbox list and the missing messages are there, but instead of listing the name of the recipient under a To: column, instead there is a From: column, and my name is all that is listed. There is no To: column. I need to know who the messages were sent to if i need to search for one later. i want the recipient to be idendified in the header, as it is in my other Sent mailboxes.
There is one thing that happened right before this occurred. I got a brand new Time Capsule and replaced my very old Airport Extreme with it. I didn't change anything. i just replaced the old base station with the new one, keeping all settings, network names and passwords the same, i just switched the hardware.
After setting up the Time Capsule, when i checked my email, i found this problem with my Gmail mailbox missing.
I found this problem raised in a few other postss on these discussion forums, but there was little or no discussion on the threads. None of them mentioned a new Time Capsule. i'm hoping someone who reads this can say what might have caused this and where the mail box is, and how to get it back.

Glenn--thanks for the reply. I think i tried your first suggestion---i highlighted the Gmail account Sent mailbox and went to the Mailbox menu, went to 'Use this mailbox for,' but all of the four options were grayed out (Sent, Junk, Trash, Drafts). i tried highlighting (or selecting) other mailboxes in the column on the left, including the ones on the server and the ones 'on this mac.' No matter which one i selected, the options were grayed out. Do you know why they would be grayed out? Am i not understanding what to do, or is there some other reason? i'm in Classic mode, in case that matters as to what's in the left column.
I have not yet tried disabling the Gmail account. i was going to, but when i went to Preferences > Accounts > Gmail, i saw and remembered that i had changed one of the settings not long ago, a week or so--where it says "Use only this server" under Outgoing Mail Server (SMTP) i had unchecked 'use only this server,' since none of the other accounts had that checked. So i rechecked it and am wondering if that would protect against what happened.
I feel nervous about disabling the account and removing it from Mail and wanted to ask you, will everything come back when i re-enable it?
Thanks

TREX error Index category could not be created: Exception 8,Error

Hi,
I am geting the error while creating the index on TREX 6.1. In t-code SKPR07 I have check the application log and got the following error and I am not able to create the index. Moreover I have check all setting as per installation document its looking fine. Please help me.
<b>error:-
Index category could not be created: Exception 8, Error
Message no. INDEXING015
Diagnosis
An error occurred when a new index category was generated using the
function module SRET_IDXCAT_CREATE.</b>
Thanks,
Harshal

Hi Harshal,
i just found your Question here, while I was searching the SCN for a solution. Because I had the same Issue.
In the SAP Support Portal I found the SAP Note 1512896 - KPro: Index category could not be created.
Take a Look at it. I guess, that could solve your problem (if it´s still exists)
Regards
André

(Solved) Workflow System Verification Step 4: workitem could not be created

Hello all
We're on R/3 4.7 and I'm trying to get workflow runtime environment up and running. I've already passed through the automatic customizing (SWU3), all is green!
When starting the verification workflow I get a mail in my SAP Workplace inbox telling me something about error WL 410.
In the workflow log I can see this (had to translate it from german, so please bare with me if wording in english is not absolutely correct):
green -> Start event received
green -> (sub-)workflow created
green -> workflow started
green -> SWW_WI_ERROR_MESSAGE_SEND_S
red   -> Callback vom Workitem ausgeführt
red   -> GET_DEADLINE
red   -> SWW_WI_STATUS_CHANGE
Clicking on the first red light pops up a message telling me something like that:
Workflow 'Workflow-System-Verification' Step n° 4: Workitem could not be created
The long text message of this and the workflow protocol tells nothing more.
Anyone out there able to help me on this issue?
Kind regards,
Renaud

Hello Alan
Yes, this nearly made me crazy. Posted a customer message to SAP concerning this in parallel last week and also sent them some screenshots. They also advised me to move unit H from (non standard) dimensionless to dimension "time". This corrected it as already mentioned before.
I did several workflow activations before and never had any problems with automatic customizing and the verification workflow... until I came across this system here. Also on all other systems known to me the unit H was never dimensionless. Double checked it last week as well. Probably someone else fiddled around in CUNI without knowing what he or she was doing? Will probably never find it out. I just hope that this was an exception! Else...
Some extra points would be great of course )
Thanks and kind regards,
Renaud

Photo Elements 12, Mac OS X 10.9.5, Trying to combine two images side by side, same height. Get this message: "Panorama could not be created as some images could not be automatically aligned". Tried with several different images, same height each combo

Photo Elements 12, Mac OS X 10.9.5, Trying to combine two images side by side, same height. Get this message: "Panorama could not be created as some images could not be automatically aligned". Tried with several different images, same height each combo

One does not "see" the images when selecting; You just select two file names, click OK, PhotoShop does the rest, and comes back with same message.

When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered.

Aperture: When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered. I can export and open via Photoshop or open directly from file-just not through external editor. Gerry

Hi gerry,
does this happen for a particular image only, or for all images?
And does this happen only from your account or also from other user accounts?
Léonie

BootCamp Assistant Error : Your bootable USB drive could not be created. "An error occurred while formatting the disk."

I have a Windows 7 Ultimate .iso file saved onto a "Mac OS Extended (Journal)" formatted USB flash drive. I am trying to install it with BootCamp Assistant and I keep getting the error message : Your bootable USB drive could not be created. "An error occurred while formatting the disk."
I have previously installed Windows 7 on my Mac (and it worked flawlessly - same .iso file), but I uninstalled it because I didn't partition enough space on my hard drive. I have used several flash drive to try and install and none have worked.
Some help would be greatly appreciated.

The Boot Camp forum is located here: https://discussions.apple.com/community/windows_software/boot_camp
The Boot Camp Guides are located here: http://www.apple.com/support/bootcamp/

"Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation."

I try to install windows7 system on my macbook air, which version is 10.8.5. When I open the bootcamp, it let me to choose a windows ISO image, which I've already downloaded from this website: http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325 /, it also asked me to select a USB drive, which is kingston that has 8GB. Then when I clicked "continue", it said that "Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation." But actually the ISO image I downloaded is 64-bit windows7. I don't know why this would happen. Could someone help me please!!

Thanks for your feedbakc Kiranjj!
I identified the reason to be that the W8 installation file didn't download completely from a Mac OS-device. I downloaded from another Win-device and the moved the installation file with a USB-stick and then everything worked diectly! But thanks anyway.

PSE7 "Photoshop Elements could not finish creating your E-Mail message."

Similar Messages

Maybe you are looking for