PSE7 will not load a file

I just installed PSE7. When I opened it, the welcome screen appeared. I clicked Edit and the workspace came up, but when I attempted to open a photo file, the cursor kept twitching (it seemed that the hourglass was trying to appear, but immediately switched back to the arrow) and the computer sounded like it was continually trying to activate. I have WIN XP with 2 Ghz but only 768 MB of RAM. I see now that the program calls for 1GB of RAM. Is the low RAM the probable cause of this problem, or does low RAM simply slow down the operation? If it is the problem, I can probably replace a 256 module with a 512 or 1000 to end up with 1024 or 1512.RAM, but I would like to be sure that is the cause before I buy and install more RAM

Thanks John and Barbara. I'm not sure why (there was a quick Update after the problem), but after a second shutdown of the program and a Restart, it seems to be working very well now. Everything opened quite quickly, and it is quicker, I think than my v3. The sputtering, when I tried to open the jpeg before, had gone on for at least 3 or 4 minutes, and I don't remember if the Effects palette was opened.
It's good to know that 768MB will handle my the program. I probably won't use all of the options as my interest is mainly in working with photos.

Similar Messages

  • Reader will not load pdf files

    my adobe reader will not load pdf files. I tried un-installing and re-downloading the reader. same thing it won't work. It works on my other computer

    The operating system is Windows 7. I get error message "there is no email program to perform the requested action". I get same error for local C: drive, jump drive, online firefox or microsoft browser. same problem.
    I fixed the problem by un-installing adobe xi and re-downloading adobe x. Its working great. adobe xi may work OK on windows 8. I have a laptop with Windows 8. I will be trying that tomorrow. I will send you a message.
    Lightman6770

  • Will not load m4v files all of sudden

    I was working just fine for monthes now. Creating a Blu ray. Burned a couple disks fine. Then yeaterday worked on a standard def DVD project, completed fine. Now I have gone back to the Blu Ray project and the m4v files wont load.
    System is a MAC 10.6

    does it matter if I render the preview files in premi�re or not. Does this effect Encore.
    It should not matter. But they must be Bluray legal.
    I assume by "render" you mean export; is that true? You might also mean "render" and you are dynamic linking.
    I assume by "segment," you mean "Premiere sequence"; is that true? You might also mean a segment of a PR sequence (i.e. using only the work area rather than the whole sequence).
    I'm having trouble understanding which files you are actually working with.
    We need to know whether Encore is working. If it is, it should import an m4v even if it is not legal and Encore is going to re-transcode it. My suggestion to use one of the old files that worked in the past was designed to test that.
    It is important to use a new Encore project with a new name.
    Another test is to export a short piece from Premiere, use the H.264-Bluray preset and change nothing, create a new Encore project, and import as timeline that m4v.

  • I DEVELOPED A WEB SITE USING WEB PAGE MAKER WITH A MOUSE OVER TO PLAY A WAVE. WORKS IN IE BUT FF WILL NOT LOAD THE FILE IN HE BACKGROUND. WHEN I FIRST OPEN THE PAGE TO TEST IT WONT PLAY THE .WAV ANY SUGGESTIONS ADD ONS ETC NEEDED THANKS

    I've developed a site using "web Page Make" I put a graphic on a page with a mouse over that morphs the graphic and plays a brief wave. I works with I.E but no go in FF 3.63.I am previewing this off a local networked drive. No problems with other net site with embedded audio do I need a certain add on etc. Can anyone offer some advice. Thanks
    == This happened ==
    Every time Firefox opened
    == I preveiwed the site and try the mouse over feature to excute the wave

    Make sure that you do not use bgsound to pay that music.
    See http://kb.mozillazine.org/Background_music_does_not_play

  • Will not load, says file path not valid

    Even had a tech try to take control but couldn't get Lightroom to open from exe

    I found the solution, I am running windows 7 64 bit os, and I had to down grade the java plug in to 1.4.2_17 and I have to launch the asdm in ie 32 bit it can be ie8 or 9, but it has to be 32 bit. feels good.

  • Will not load local web-page and will not allow pop-ups

    does not work with local web pages
    will not load local files with basic HTTP HREF
    have to specifically add file:/// to all addresses
    will not allow pop-ups for local files

    You need to access the files via http://localhost/ if you want to set an exception.
    Other things that need attention:<br>
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Java Plug-in 1.5.0_02 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • .gif files will not load into site

    I posted a question earlier about pages not loading and the question was answered, but now my .gif files will not load. Below is the log:
    Started: 4/9/2012 2:41 PM
    imageshomepage\Announce35.gif - error occurred - An FTP error occurred - cannot put Announce35.gif.  Access denied.  The file may not exist, or there could be a permission problem.
    File activity incomplete. 1 file(s) or folder(s) were not completed.
    Files with errors: 1
    imageshomepage\Announce35.gif
    Finished: 4/9/2012 2:41 PM
    I have them loading into the images folder that is in the htdocs folder.
    I stated in my previous question that I am self taught via the adobe DW tutorial. I had a catastrophic computer crash and had to reload everything. I apparently did not tell DW which file to load into before and now that is fixed. Any help would be greatly appreciated.
    Thanks

    I was never a big fan of using DW to FTP. There are several FTP programs that you might find work better than DW. For example Filezilla, free and works pretty darn well.
    http://filezilla-project.org/
    For me, being able to graphically see my local site on one half my screen and the site as it sits on the server on the other half of the screen really helps me quickly spot problems if I upload something and it doesn't display.
    Anyway... DW is not the only option for loading files to your server.
    Best wishes,
    Adninjastrator

  • Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub.  The file will not load.  Is there some form of blocking by itunes or another p[roblem and how d

    I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub.  The file will not load.  Is there some form of blocking by itunes or another p[roblem and how do I fix it?

    You can't fix it.  iTunes bought content is DRM protected. so it can only be played on authorized devices.  i.e devices associated with the apple Id used to purchase the content.  Its copyright protection that the rights owners demand.
    Circumventing it, is illegal in most countries, and as such cannot be discussed here.  If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

  • Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Ok this is bizzare!
    Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
    So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
    AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
    I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

  • CR files will no longer show in bridge and will not load into PS

    Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
    I get now the following error messages
    These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
    I tried image processor in bridge to make them PS files and got the following error message.
    I tried to load one of the CR files from the finder dirretly and got the following error message.
    Any help would be appreciated. If the post goes inanswered I will call tech support  again. aloha UP

    HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

  • When I try to email a photo as an attachment the iphoto file will not load

    When I try to email a photo as an attachment the file will not load?

    Open iPhoto, and then go to Preferences (under iPhoto in the menu bar).  Check these two things:
    1.  Under the "General" tab, make sure you have set "Email photos using" to "iPhoto".
    2.  Under the "Accounts" tab, be sure your email account information is set correctly.

  • Cs4 will not load cannon 5d mark II raw files

    I had to reload cs4 and now it will not load a raw file from the 5d mark II. It worked fine before I reloaded it. I am using windows 7 and it will look at the raw files ok. I tried downloading the raw programs from microsoft and adobe.

    Update Camera Raw...the current version for CS4 if Camera Raw 5.6.

  • The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used for more thatn a month.

    The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.

    GPPNeil
    Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
    First..
    1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
    2. Do the problems exist if you disable the antivirus and firewall(s)?
    3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
    4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
    5. Have you updated the Adobe Application Manager?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
    7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
    13.0 Folder in which it exists.
    But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
    CCleaner - PC Optimization and Cleaning - Free Download
    If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • My Nikon 7100 RAW files will not load into Iphoto.

    My Nikon 7100 RAW files will not load into IPhoto.  The computer will recognize the files once the download is complete, but fails to finalize.  My version of IPhoto is 7.1.5 and my computer is a Mid 2007 Mac Mini Model.  I have Light Room 5, but my wife and I are prefer IPhoto for basic download and sharing.  Is there a possibility  of getting the RAW files to download ?

    what version of the OS?
    You need Mt Lion and iPhoto '09 for your camera RAW support - OS X Mountain Lion: Supported digital camera RAW formats -
    If your computer will support tMavericks do the free upgrade to it and purchase the upgrade to iPhoto '11 version 9.5.x in the App store
    LN

Maybe you are looking for