PSE8 winxp Can't start Organizer from welcome screen

I click on organizer in welcome screen and the welcome screen goes away and organizer screen doesn't show. There is an icon on the taskbar indicating the status of Backup/Schronize which says that is is on 164 of 839 photos. A few minustes later it was updated to 179 of 839. Also although I paid for addional space the screen says that it is updated 0-2 G instead of 22G. I can't get to Editor either from Welcome screen. I thought backup was in background and shouldn't affect me running Organizer.

Organizer should get launch even though the Sync is running in the background. Was the PhotoshopElementsOrganizer.exe running in task manager when you face this issue ?
~Sourabh

Similar Messages

Can't launch PSE 11 Organizer from Welcome Screen

I was trying to see if there was an easier way to scan my photos directly into PSE 11. i found this on the Adobe site. http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html (See Windows 64 bit) I went into the Program File... Optional Plug-In and right clicked and copied. Then I went to the Program File... Plug In file and was going to copy it but didn't. I really didn't know what I was doing so I stopped and closed out of the Program Files. I was able to scan my files on my Epson scanner and get them into the Organizer without doing this.
I can't remember if I had the Organizer open at the time I was doing the above or opened it afterwards. Anyway I was scanning and organizing, backed up my pictures on a flashdrive and all was good and closed the Organizer. I then connected an External hard drive I hadn't used for a while to see what photos were on it. Then I went to open the Organizer as I wanted to do a backup on the External hard drive. Now as stated above, I can't open the Organizer from the Welcome Screen or from the Editor.
Did I screw something up from what I was doing in the first paragraph or what. Help!!

See if this link helps:
http://psekb.blogspot.in/2013/03/pse-organizer-is-not-launching.html
Regards,
vaishali

Can't start camera from unlock screen in iphone 5c since ios8

Hi!
Some I can't start the camera from the unlock screen in iphone 5c since ios8 update.
It works a couple of hours after reboot, but the problem keeps turning back randomly.
After iOS8 update I also installed facebook, facebook messenger, linkedin and sync.me and configured skype.
The actions are:
Enabling the unlock screen and then sliding up the camera icon, it seems to appear a camera captured image but then the screen turns black or greyish (randomly) like the unlock screen background.
The problem doesn't happen from the control center panel locked or unlocked.
It isn't a big problem because there are simple workarounds, but it's annoying when it happens.
Best regards,
Bruno.

This problem seem to have been solved in iOS 8.0.2.

HT1338 If I have OS 7.5 installed on an external drive, can I start up from the external drive in that OS when my macbook pro is 10.7?

If I have OS 10.6 installed on an external drive, can I start up from the external drive if I have 10.7 installed on my macbook pro?

Provided that the MBP supports booting from that version of 10.6, and the install was from a retail disk (not a different Mac model), then yes. If it's a newer Pro that came with Lion, it may not boot to 10.6.
Matt

[Solved] Can't start GParted from XFCE menu

Hi,
I have polkit installed but I can't start GParted from the XFCE menu. Do I need to edit any configuration files to make this work? The wiki isn't very clear about what to do after installing polkit. Thanks.
Last edited by kaixi (2012-11-02 15:09:12)

In my Xfce4 installation, it's /usr/share/applications/GParted, which I copied over to ~/.local/share/applications/, as kaixi suggested, and it appeared there as gparted.desktop. Right-click for Properties > Launcher > Command, and in that field (not wanting to install gksu) I put sudo gparted, which works, thanks.

Can't start up from Install disk

I'm using a MacBook purchased 3/07. System 10.4.11
I can't start up from the Install Disk for Leopard. I only get a screen with the apple logo and the spinning thing. I wait 10 minutes. Nothing happens. I've tried both using the Disk for the start up and clicking on Install icons but when it shuts down to restart....nothing.
Can anyone help me?
Thanks. Lois

Hi Josef,
I left it on for over an hour and nothing happened. Finally called Apple and after an hour and a half of all kinds of testing, restarts, zapping and I don't know what else, the nice man there talked to his supervisor and then had me test the hardware (hold down D when starting). Turns out there is a problem with my ram so now I have to take it to a local technician and if he can't fix it, it'll have to go back to Apple for repairs. Ho hum. I just hope it finally gets working to make all this worthwhile.
Thanks again for your interest and help.
Berengaria

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

Edit and organization not open from welcome screen!!!??

i have problem setup Adobe Photoshop Elements 9 and no any problem in the setup when i open welcome screen i click on the edit or organization it's make loading and nothing so i go to source folder .
when i go to source folder i try to open PhotoshopElementsEditor.exe file it give me message say" unable to continue because of hardware or system error.sorry,but this error is unrecoverable". what i must to do i have win7 and 1.9Gb Ram and 700MB Graphics Memory and processor pentium dual-core 2.20GHz

I DO IT MANY TIME'S BUT I CAN OPEN ORGANIZER FROM THE SOURCE FOLDER AND I TRY DO ANY THING TO OPEN EDIT FROM THE ORGANIZER
BUT ....NOT WORK

Can't start movies from AppleTV directly :-(

First thing first: I'm not sure what version of appleTV I own but I purchased it from an apple store about a month ago. That being sayd: When I try to start a movie (from my home share) directly via appleTV it doesn't load. However, when I start movies from my PC it works flawlessly with no problems at all.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Can't start up from 10.5 Install Disk, but can from MB Pro Install Disk?

Many thanks in advance for your attention.
1. I was going to Verify (and then maybe Repair) HD by starting up my computer from the OS 10.5 install disk, but my laptop just blacked out (froze) each time I tried to start up from the 10.5 install disk. I tried starting up holding down the "c" key, the "option" key, and the "shift" key.
Each time my laptop just blacked out and froze. Odd as the 10.5 install disk has very rarely ben used and has no visible scratches, etc. I think I haven't used it since the original install.
2. So I tried instead the original Install Disk 1 that came factory specific with the MacBook Pro (which also has 10.5 and iLife, etc. on it). Held down the "c" key and I was able to boot from the Disk (and do a Verify Disk, etc.). No problems at all.
Anyone know what could be up with my OS 10.5 Install Disk? Is there a way to test if the Disk itself is somehow damaged?
Thank you.

Thanks again for your response.
I am all for these forums in helping people out. I know some questions/ answers can't be all black and white.
But - in the interests of clarity for others out there -
1. Again, I was not trying to INSTALL from the 10.5 Install Disk.
2. I was merely trying to insert it and use it to VERIFY my HD.
3. I know one cannot do an "update" INSTALL from (for example) a 10.4 Disk if one already has 10.5 installed.
4. But - through the incarnations of 10.1, 10.2, 10.3, 10.4 - I had always been able to use the OS X retail install disk (no matter how old) to check out my HD, even if my HD had (for example) 10.3.5 on it and my Install Disk was just 10.3.
According to the link William posted, this may be different (I would guess on rare occasions), starting with Leopard.
5. But, given my history through all the incarnations of OS X, I was puzzled when it seemed my laptop could not read my very unused, mint 10.5 OS Install Disk. A mystery. But when I washed a seemingly flawless disk, it worked afterwards. So something must have been on it I couldn't see.

Can't start up from disk

when I hold down the c key with a system disk in the drive, the computer starts up, but offers to install a new system... How do I just get it to start up from the disk (so I can run disk utility on my hd)?
This is on my eMac, 1.25 GHz, 1.25 GB RAM, running 10.4.11
Thanks

It should first ask you to select your language. After you choose your language, click the "Utilities" menu to find Disk Utility.

Can't start listener from OEM. It appears as Stopped although it is not.

Hi,
I can't make the EM show the listener as running, it always shows it as stopped. I checked it with lsnrctl and it is running, but in EM appears as stopped. I refreshed the screen and nothing; I tried to start it from the EM, and it displays a message like "The listener has been correctly started", but when I check the status in EM it is still stopped. And when I check the details, it shows an error "Access denied", NET_ADMIN_ERROR,REMOTE_OP_ERROR,No such file or directory. I think I have the right credentials (I'm in the administrators group, and I have log on as batch job)
I would appreciate any help on this.
Thanks a lot
Ricardo

Hi Nicolas- here's the SQLNet and listener file:
-----------------LISTENER
# listener.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
jon =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
-----------------SQLNET
# sqlnet.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
#SQLNET.AUTHENTICATION_SERVICES= (NTS)
#NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I can't see any excess protocols in the listener. As per some metalink entries - I've commented out the "SQLNET.AUTHENTICATION_SERVICES= (NTS)" line from the SQLNet file.
Still the same problem.
To be honest - all replies to postings for this error have not worked. I've contacted some guys with the same problem - and their resolution was to completely reinstall XP and then Oracle again. Just removing and reinstall Oracle was insufficient. So - i guess i'm going to have to follow suit.
Any last minute suggestions before this bit of drastic action?!

Can't start up from optical drive

I can't get my MacBook to start up from the optical dis drive, It does not get recognised either when I start up and hold 'C' or when I select it under Start Up Disk in the System Preferences. Any suggestions? Thanx.

are u using the Efi password protection utility? youll have to bypass/disable/turn off that first. Its got a feature that will disable the startup keys

Can't start up from Install CD

Hi...My Mom's iMac needs the drive erased and the OS reinstalled. I have the original Install CD but this iMac won't start up from it either when I hold down C on start up or when it restarts when I follow prompts from Install CD.
It reads the Install CD on the desktop. Any thoughts about why it won't boot from CD?
Can I link to my iBook via firewire and install OS from there?
Or can I download the OS 10.2.8? I have the original receipt for OS and all manuals, etc. What would I need to do that?
Thank you very much!

Hi steve
Please confirm it's NOT possible to install from a firewire linked iBook?
It is possible, though if you cannot install from the iMac's CD drive then it is not likely it will work from the iBook's drive, but you can try.
With the iMac on (Host), the iBook off (Target) connect the firewire cable.
Start the iBook, hold T key to make it the boot drive. It will appear on the iMac's Desktop.
Insert the Jaguar Install CD into the iBook.
It too will appear on the iMac's Desktop.
From the iMac, select Restart and hold down the Option key to select Start-up Manager.
From Start-up Manager, select the Jaguar Install CD which will take you into the installation.
Select the iMac's HD as the destination for the installation.
...or the possibility of downloading 10.2?
Negative on this one. No Mac OS's are available for download as they have a commercial value and cannot be uploaded or downloaded. Besides, you have the Jaguar disk to use. I hope you can install it.
If the iMac's HD is full you will not be able to do an Archive and Install as there won't be room, but it sounds like an Erase an Install is what you are after anyway.
regards roam

Can't start lxde from console

Hi, I've managed to install lxde fine but I can't start it through console. I don't have a login manager atm...
When I do use this command:
startlxde
nothing happens...:(
Any help would be appreciated...:)
thanks in advance

~/.xinitrc
exec startlxde
From console: startx.
See this wiki entry.
Enjoy,
Bob
Last edited by Hrod beraht (2009-02-04 21:08:23)

PSE8 winxp Can't start Organizer from welcome screen

Similar Messages

Maybe you are looking for