PSE9 - import / open settings for jpegs - are there any?

Hi all,
I'm a LR3 user mainly so have very little idea about PSE9 but my Dad's Panasonic Lumix FS10 takes all images at 180dpi and this cannot be altered.
Is there any way of getting Elements 9 to alter the resolution that it immediately displays the images at, as unlike LR3 there doesn't appear to be any 'export' facility where you can batch export loads of images and have individual 'save' settings for each export.
Altering each and every image to 72dpi before saving as jpeg is a complete pain in the whatnots.
I've tried the batch convert option for all open files but it saves a copy of each file which ends up bigger than the original!
Many thanks in advance.
Dave.

juergen_d wrote:
DPI is an arbitrary number set by the camera manufacturer. Some cameras show 180, some 240, some none, which is defaulted to 72. The file size is not influenced by it. DPI = dots per inch is only relevant for printing and should be referred to as PPI (pixels per inch). The really important values are the pixel dimensions of an image. Of course, the file size is also dependent on the picture quality and compression algorithms. If you 'converted' from 180 to 72 and afterward had a smaller file size, then a additional compression must have taken place, which would have lessened the images' quality.
Juergen
Thanks for this Juergen,
are we now heading to the "eye of the beholder" scenario though?
If the images 95% of the time are going to be used for posting on the internet / viewing on PC monitor use (this being maxed out at 72dpi), and no image quality loss can be seen between the 2 (72dpi & 180dpi) files, the user may as well stick with the 72dpi conversions and have smaller files then?
When the user normally then reduces the image dimensions to 1200px on the longest side, surely the 72dpi verisons will be better for them?
Granted as I mentioned before, the images may get used for printing once in a while, but again, I use my full-sized images at 72dpi and can get pin sharp A4s out of them whenever I want.
Dave.

Similar Messages

I can not read any contents in my yahoo inbox messages? It is blank when i opened my message. Are there any setting or updated that i missed? Please give me some advices? Thank you. Phuong

Question:
I can not read any contents in my yahoo inbox messages? It is blank when i opened my message. Are there any setting or updated that i missed? Please give me some advices? Thank you. Phuong

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

While looking to upgrade to a new MBP, found out latest version of iTunes does not support wired syncing of iCal and contacts. syncing of these must be done through iCloud. This is a deal breaker for me. are there any workarounds?

While looking to upgrade to a newer MBP, found out latest version of iTunes does not support wired syncing of iCal and contacts. Syncing of these must be done through iCloud. This is a deal breaker for me for several reasons. Are there any workarounds or do I have to go back to a PC with my tail tucked between my legs?

When you say wired syncing, are you meaning between an iphone and your mac?

RCA or S-Video connectors for Mac are there any?

Hi all,
I don't know if this is the right forum for this post, if not please direct me to the right one. Ok, I was wondering if there is any way to hook up my Play Station 2 to my Mac so that I can play the games useing my display? Is there any realtivly inexpencive tv tuner, or something that I can use to hookup eather the RCA (red, yellow, white plugs) or s-video out's on the Play Station 2 to my Mac? Normaly I would hook it up to a TV, but I do not have a TV where I am and wil not for a while. Bellow is a link to the only one that I have been able to find.
http://www.microcenter.com/singleproduct_results.phtml?productid=0221682
Any help would be great. Thanks in advance.
G4 dual 1.25Ghz, FP 17 Mac OS X (10.3.5)

Hello Malcolm,
Thanks for the responce. I did not even think about that. So do think that it would be better for me to get the ATI 9200 video card that has a s-video plug built into it. Bellow is the link to it here on the Apple site. Thanks again and any help will be great.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/7201107/wo/qF4ic XuSOhPA2VZux3vQMY5ghjQ/1.0.19.1.0.8.25.7.11.0.1
Greg
G4 dual 1.25Ghz, FP 17 Mac OS X (10.3.5)

HT201342 Are there any setting or some way to show notifications for new email without open Apple Mail app ?

Are there any setting or some way to show notifications for new email without open Apple Mail app ?
You know , I am an OCD . I alway's close my Mail app and miss many important new emails .

What I do is open the Mail.app, then click the red traffic light (upper left corner of the main Mail.app window) to close that window. The app itself will remain running and you will get updates - this helps keep the desktop tidy while while the mail app remains running. When an update is received, simply click the either the mail icon in your dock or go to the Mail.app menu and click Window > Message Viewer.

Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive. The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive. The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

I have posted this annoying Robles to bugreport.apple.com. Hope I can get locution (although Apple normally will not respond):
On a software name Appfresh, it alerted me to update my MBPr 15 inches running latest OSX 10.8.2, with Chinese Word List Update 1.2. When I clicked on Software Pdate, app Store return No update available.
My system have Chinese Word List Update 1.0 installed, and on October 5, 2012, Chinese Word List Update 1.1 was released by Apple, as alerted through AppFresh. However, this update never get updated on m system. I have to manually download chinesewordlistupdate.pkg from reviews.cnet.com/macfixit and install it manually. By doing so, I have Chinese Word List Update 1.1 on my system.
The same problem occurred again today on November 5, 2012, where Chinese Word List Update is released by Apple. again, it fail to update from Software Update menu.
Can you please:
1. Explain why this problem occurred. This is so annoying.
2. Advise me how can I get this Chinese Word List Date to update to version 1.2. Can you please send me the chinesewordlistupdate.pkg for version 1,2 so that I can manually install it on my system?
3. How can I prevent similar problem with he subsequent version?
Why Apple don't make this update standard as other update?
Support please. Thank for response in advance

Are there any limitations for importing Apple Aperture Libraries for Lightroom 5.7 ? What can be the hardware limitation importing large Aperture Libraries like 200 gb ? Or is importing larger Aperture Libraries even possible at the moment for Lightroom 5

Are there any limitations for importing Apple Aperture Libraries for Lightroom 5.7 ? What can be the hardware limitation for importing large Aperture Libraries like 200 gb ? Or is importing larger Aperture Libraries even possible at the moment to Lightroom 5.7 ?

dj_paige wrote:
As far as hardware restrictions, the only one I can think of is that you certainly need enough free space on your hard disk to accomodate the masters from your Aperture library.
IIn which case, ensure all your masters are "referenced" in Aperture, and that you then go to Options in the Lightroom import box and import photos in their existing locations.

I have Mac OSX Lion 10.7.4, Quickbooks Pro 2010, Parallels Desktop 7 for Mac, Operating in Windows 7. Are there any recommendations for running Quickbooks Pro 2010?

I have Mac OSX Lion 10.7.4, Quickbooks Pro 2010, Parallels Desktop 7 for Mac, Operating in Windows 7. Quicbooks Pro 2010 is not responding or opening currently. Quickbooks does not support Parallels anymore. I hear Apple Bootcamp is an opton. Are there any recommendations for running Quickbooks Pro 2010 on Mac?

QuickBooks Pro 2010 for Mac is not supported in Lion. QB Pro 2011 will work, but I just got an email today that 2011 will not be updated to work in Mountain Lion. QB Pro 2012 will be updated for ML.
Be aware that the Mac version of QuickBooks is shamefully lacking in features compared to the Windows version. I do use the Mac version, but it has more features than I need for a small business, so it doesn't affect me. No one knows why Intuit seems to hate Mac users, but they show it every day.
If QB Pro 2012 for Mac can be downloaded as a demo, I would strongly suggest testing with it before making a final decision. You will be able to import the Windows data, but possibly not all of it, depending on the Windows version features you use.
Boot Camp allows you to install Windows on its own, bootable partition. When you boot to it, you are of course running Windows in every sense of the word. Just on Mac hardware rather than typical PC gear. Your Windows version of QB will work there without issue. The problem is having to boot back and forth between Windows and OS X, depending on what software it is you need to use at the time.

DTW template to import opening Balences for BP and Items

Hi all,
Is there any DTW template to import opening Balences for BP and Items
Thanks & Regards,
Naresh K

Naresh,
When you are talking about opening balances of BP and Items, I believe you are talking about Open AR and AP transactions and Opening Stock for Items.
If this is the case then,
For BP Opening Balance, you will need to import them as AR and AP Service Invoice using the template inside folder oInvoices and oPurchaseInvoices
For Opening Stock, you will use template inside oStockTaking
Suda

I do not want Creative Cloud. My current version of Lightroom is 5.7. I take it I have to buy Lightroom 6 outright? Are there any price concessions for upgrades?

I do not want Creative Cloud. My current version of Lightroom is 5.7. Are there any price concessions for upgrades or do I have to buy Lightroom 6 outright?

@landaloons who posted: "Clicking 'Checkout' does nothing. There is apparently no way to get the upgrade at present."
Your browser has to have tracking enabled and open a pop-up for Checkout to work. Browser add-ons and custom settings can block this from happening. In Firefox I had to temporarily disable Ghostery to advance past the Checkout button. You may have a similar tracker/pop-up disabler in your browser that you need to turn off temporarily. Alternatively try a different browser with no custom settings. Doing this I was able to download and install a $79.99 upgrade version, so it does work, but they don't make it easy to find or do. They want you to subscribe instead. (In fairness, though, you'd have this same Checkout issue trying to subscribe to CC if your browser settings block advancement past the Checkout button.)

Are there any specific codecs or import libraries that will make Premiere 6 use more file types?

Are there any specific codecs or import libraries that will allow Premiere 6 to import more file types? I'm using Premiere 6 on Windows 7.
It seems that the only kind of file that can be imported in to this version of Premiere are certain types of AVI files... even some types of AVIs will import but then will not appear when placed in the timeline... no MPGs, MP4s, WMVs, or anything else will import at all.
Virtually every file that I need to bring in to Premiere 6 has to be converted to AVI with the H.264 codec first.
Any help would be helpful.
digi

Hi Bill and John,
Thanks for your replies.
My inquiry isn't as much to do with the AVIs that won't import as it is to do with figuring out the way that I can make MPGs, MP4s, MOVs and WMVs import in to Premiere 6.
The AVIs that do import were converted or created using the H.264 codec. I do know a little about codecs, but I don't hold the PhD in codecs that is apparently required to completely understand them.
Below is the chart from the Premiere Elements 4 page at this link... http://kb2.adobe.com/cps/402/kb402540.html
So, if I understand correctly, Bill is saying the Premeire Elements 4 is actually newer than Premiere 6 and that the Pr Elements apps will actually import more movie file formats than the regular versions of Premiere and Premiere Pro?... for someone trying to learn about these apps, one must admit that this seems to be reverse logic... this would be saying that Adobe gave the cheaper "consumer" versions of Premiere the ability to work with 3 or 4 more movie file formats than the more expensive "pro-sumer" version of Premiere.
Premiere 4 Elements File Format Support Chart
Microsoft AVI (.avi)
Import and Export
MOD (JVC Everio camera) (.mod)
Import only
MPEG-1 (.mpg, .mpeg, .m1v, .mpv)
Import and Export
MPEG-2 (.mpg, .mpeg, .mpe, .m2t, .m2v, .mod, .mpd, .m2p)
Import only
MPEG-4 (.mp4, .m4v)
Export only
Export via QuickTime file or "Share to Mobile" workflow.
QuickTime Movie (.mov, .moov)
Import and Export
Windows Media video (.wmv)
Import and Export
The built-in web browser instruction manual in Premiere 6 shows this statement on the "Importing Clips" page, as shown in my screenshot linked above...
"File format support is provided by plug-in software modules. Over time, additional or updated file formats may be available from Adobe or other manufacturers, such as QuickTime."
This indicates that additional file format support can be added to Premiere 6 by "plug-in software modules", and that "over time, additional or updated file formats" were predicted to become available that would be supported by the file format manufacturers, such as Adobe themselves and other manufacturers such as QuickTime.
Since that was written ten years ago or more, there has certainly been the chance for these additional "plug-in software modules" to be developed "over time"... so I'm asking, "Where are they available?"
What I'm saying is, I will do my homework to earn at least my Bachelor's degree in codecs, but more than an education in codecs, I need to find these mysterious, "plug-in software modules" for Premiere 6 that Adobe wrote about and referred to over ten years ago.
Thanks for any clues as to where to locate these "plug-in software modules".
digi

Are there any presets in iPhoto '11 for print quality?

Are there any presets in iPhoto '11 for print quality?

No. Just use the greatest number of pixels for your photo available. Other quality settings would be in the printer window, i.e. color settings, etc.
OT

Are there any fixes for iPad 2 with OS 8.1.1.

Are there any fixes for the iPad 2 IOS 8.1.1? I've had problems with Safari and other Apps crashing or locking up, and with extremely slow touch response. These problems have been occurring since the last update. At times the iPad becomes unusable. I have been keeping all programs closed and history and web site data cleared. Thanks for any help you can give.

Hi, dannilee,
I have exactly the same problem. The device was my favorite computer until 8.1.1. Now it runs s-l-o-w-l-y, requires endless reboots.
To improve the performamce, I have tried these:
1.Go to Setting->General->Accessibility->Reduce Motion. Turn on.
2.Reset iPad device settings using Setting->General->Reset->Reset All Settings. Its increase iPad performance little better.
3.Hold the sleep/wake button and home button upto 8 seconds. This will turn off your iPad. Then turn on iPad. Wait few moments. Do the same thing twice to solve this issue.
Solution 3 worked for me. And, I always recommend you to backup your iPad first before any action to avoid any data loss.
Hope it is useful for you.

My tabs are seperated into groups. Once I accidentaly opened a site in a new window (not a new tab). After that, I accidentaly closed the Firefox window with all my grouped tabs. Now, I can't recover it. Are there any solutions?

I have my tabs seperated into several groups (for example, bank tabs, music tabs, social life tabs and so on). I do this with the help of the button in the top left corner. While I was surfing the internet, I accidentaly opened a site not in a new tab (as I usually do), but in a new window. The new window was without all the grouped tabs, which I had in the previous Firefox window. And then I accidentaly closed the Firefox window with all my grouped tabs. Now I can't recover it. Are there any solutions?

Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal

Are there any additional audio imput controls other than settings ?

I am having issues with an USB microphone, and unless I turn the settings (in audio imput ) all the way down to about 2%, I get distortion from the mic being too sensitive ( and have to place it several feet away from the source)
Are there any other controls I can use to reduce the volume IN, in addition to the slide adjustment in the Sound Imput box ? is there a Gain adjustment ?
thanks

Depending on the device, you probably are not going to see any input gain control options in either System Prefs > Sound or Applications > Utilities > Audio MIDI Setup. There might be some app that comes with the USB mic that will have some additional options, but I have not had much luck with these apps from the audio device manufacturers, nor with the drivers that come with them. If you are using the USB mic for input for a recording app like Logic, then there are gain controls there.
It's way easier to just use an audio output mic and a USB interface or mixer, which is why the vast majority of professional sound recording people don't use USB microphones.
I use a pretty cheap (less than 100 bucks) interface, which actually has a gain knob right on it.

PSE9 - import / open settings for jpegs - are there any?

Similar Messages

Maybe you are looking for