PSE9: Suddenly getting error when processing mutliple RAW files

I am usine PSE9 and went to process multiple RAW files today like I have done numerous times in the past.  However, suddenly today even though the settings are still set for MAX JPEG I am getting promted to save each file as a PhotoShop file.  Then all of a sudden it started processing all the files automatically as it has in the past but when completed I get the following error for each individual image file.
Start Processing Multiple Files
File: "C:\Users\desktop1\Desktop\2011_08_20_Early_Morning_Garden\_MG_0992.CR2"
Error: The parameters for command "Save" are not currently valid. (-25923)
I have made no changes to PSE9 and as said have performed this operation numerous times previously.
Any help would be greatly appreciated.
Thanks

Alternatively Tony should try using Canon’s Digital Photo Professional which came with his camera. It’s by far the best staring point for CR2 raw files.
 

Similar Messages

  • Getting error when processing dimension

    Hi All,
             I am working on BPC5.1.when iam processing the dimension iam getting the error.
    in OPTIMIZE SCHEMA---Skip optimize schema step,
    in UPDATE OLAP----
    Skip updating OLAP step..
    RESULT---FAIL...
    this are the errors iam getting.can some body help me in solving these issues..
    All the best.
    Regards,
    Naresh.K..

    Hi Sorin!
    Our technical team managed to find the immediate cause for the problem, and a solution.
    According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
    Where <APPLICATION> is the name of the problematic cube.
    After that everything is working.
    I still don't know why the file was corrupted, but at least now we have a quick & repeatable solution in case this happens again.

  • CS4 - Getting error when opening a .gif file - file-format module cannot parse the file.

    I am getting this popup error when trying to open a .gif file:
    "Could not complete your request because the file-format module cannot parse the file."
    This comes up every time I try to open a .gif file.  Even if I make a .gif file (like the image included in this post), save it and then try to open it again, I get the same error.  I tried reinstalling CS4, but the error is still there.  I have also done the reset on start-up and nothing.  Some have suggested that I open it in (Windows XP Pro) MS Paint and then save it again.  Did it and this does NOT work for me, either. 
    I know it's a Photoshop problem because I can see this file everywhere, except Photoshop.  It will open here, there and everywhere, except for Photoshop.
    I've searched the Adobe Commmunity and it looks like no one has come up with a fix for this.  I'm just currious after 5 years with this problem, has there been a solution?
    Scott

    One of the files that has the error is in my first post.
    Adobe Photoshop Version: 11.0
    Operating System: Windows XP 32-bit
    Version: 5.1 Service Pack 3
    System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2
    Physical processor count: 6
    Processor speed: 3210 MHz
    Video Card: NVIDIA GeForce GTX 460
    Video Mode: 1280 x 1024 x 4294967296 colors
    Video Card Driver: nv4_disp.dll
    Driver Version: 6.14.13.0623
    Built-in memory: 3289 MB
    Free memory: 257 MB
    Memory available to Photoshop: 1677 MB
    Memory used by Photoshop: 69 %
    Image cache levels: 4
    Serial number: xxxxxxxxxxxxxxx
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS4\
    Temporary file path: C:\DOCUME~1\xxxxxx\LOCALS~1\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      F:\, 233.7G, 145.7G free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS4\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       ACE.dll   ACE 2008/08/27-18:10:41     
       AdobeLinguistic.dll   Adobe Linguisitc Library   4.0.0  
       AdobeLM.dll   AdobeLM   3.0.11.10077    53.352460
       AdobeLM_libFNP.dll   FLEXnet Publisher (32 bit)   11.5.0.1 build 57427  
       AdobeOwl.dll   Adobe Owl
       AdobeOwlCanvas.dll   Adobe Owl Canvas  
       AdobePDFL.dll   PDFL 2008/08/20-20:15:08  
       AdobeUpdater.dll   Adobe Updater Library   
       AdobeXMP.dll   Adobe XMP Core 
       AdobeXMPFiles.dll   Adobe XMP Files   4.2.2   53.352624
       AdobeXMPScript.dll   Adobe XMP Script   4.2.2   53.352624
       adobe_caps.dll   Adobe CAPS   2,0,99,0   2.135373
       adobe_epic.dll   Adobe EPIC   3.0.1.10077    53.352460
       adobe_eula.dll   Adobe EPIC EULA   3.0.1.10077
       AFlamingo.dll   AFlamingo
       AGM.dll   AGM      
       ahclient.dll    AdobeHelp Dynamic Link Library   1, 3, 12, 0  
       aif_core.dll   AIF   1.0 
       aif_ogl.dll   AIF   1.0  
       amtlib.dll   AMTLib   2.0.1.10077    53.352460
       amtservices.dll   AMTServices   2.0.1.10077    53.352460
       ARE.dll   ARE 2008/08/27-18:10:41     
       asneu.dll    AsnEndUser Dynamic Link Library   1, 6, 0, 8  
       authplay.dll        
       AXE8SharedExpat.dll   AXE8SharedExpat
       AXEDOMCore.dll   AXEDOMCore
       Bib.dll   BIB      
       BIBUtils.dll   BIBUtils      
       cg.dll   NVIDIA Cg Runtime   2.0.0015  
       cgGL.dll   NVIDIA Cg Runtime   2.0.0015  
       CoolType.dll   CoolType 2008/08/27-18:10:41     
       data_flow.dll   AIF   1.0   53.352475
       ExtendScript.dll   ExtendScript      
       FileInfo.dll   Adobe XMP FileInfo   4.2.2  
       FNP_Act_Installer.dll   FLEXnet Publisher (32 bit)     
       icucnv36.dll 
       icudt36.dll     
       image_flow.dll   AIF   1.0   53.352475
       image_runtime.dll   AIF   1.0   53.352475
       JP2KLib.dll   JP2KLib 2008/06/11-20:19:53   53.100857   53.100857
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       MPS.dll   MPS 2008/07/07-10:33:04   53.350311   53.350311
       msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0  
       msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS4   CS4  
       Plugin.dll   Adobe Photoshop CS4   CS4  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   1.0.0.73  
       PSArt.dll   Adobe Photoshop CS4   CS4  
       PSViews.dll   Adobe Photoshop CS4   CS4  
       registration.dll   Registration   
       SCCore.dll   ScCore      
       shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System     
       WRServices.dll   WRServices
    Installed plug-ins:
       3D Studio 11.0
       ADM 3.11x01
       Accented Edges 11.0
       Angled Strokes 11.0
       Average 11.0
       BMP 11.0
       Bas Relief 11.0
       Camera Raw 5.0
       Chalk & Charcoal 11.0
       Charcoal 11.0
       Chrome 11.0
       Cineon 11.0   
       Clouds 11.0
       Collada 11.0
       Color Halftone 11.0
       Colored Pencil 11.0
       CompuServe GIF 11.0
       Conté Crayon 11.0
       Craquelure 11.0
       Crop and Straighten Photos 11.0
       Crop and Straighten Photos Filter 11.0
       Crosshatch 11.0
       Crystallize 11.0
       Cutout 11.0
       Dark Strokes 11.0
       De-Interlace 11.0
       Dicom 11.0
       Difference Clouds 11.0
       Diffuse Glow 11.0
       Displace 11.0
       Dry Brush 11.0
       Embed Watermark 3.0
       Entropy 11.0
       Extrude 11.0
       FXG 11.0
       FastCore Routines 11.0
       Fibers 11.0
       Film Grain 11.0
       Filmstrip 11.0
       Filter Gallery 11.0
       Fresco 11.0
       Glass 11.0
       Glowing Edges 11.0
       Google Earth 4 11.0
       Grain 11.0
       Graphic Pen 11.0
       HDRMergeUI 11.0
       Halftone Pattern 11.0
       IFF Format 11.0
       Ink Outlines 11.0
       Kurtosis 11.0
       Lens Blur 11.0
       Lens Correction 11.0
       Lens Flare 11.0
       Lighting Effects 11.0
       Liquify 11.0
       MMXCore Routines 11.0
       Matlab Operation 11.0
       Maximum 11.0
       Mean 11.0
       Measurement Core 11.0
       Median 11.0
       Mezzotint 11.0
       Minimum 11.0
       Mosaic Tiles 11.0
       Multiprocessor Support 11.0
       NTSC Colors 11.0
       Neon Glow 11.0
       Note Paper 11.0
       Ocean Ripple 11.0
       OpenEXR 11.0
       PCX 11.0
       PNG 11.0
       Paint Daubs 11.0
       Palette Knife 11.0
       Patchwork 11.0
       Paths to Illustrator 11.0
       Photocopy 11.0
       Photoshop 3D Engine 11.0
       Picture Package Filter 11.0
       Pinch 11.0
       Pixar 11.0
       Plaster 11.0
       Plastic Wrap 11.0
       Pointillize 11.0
       Polar Coordinates 11.0
       Portable Bit Map 11.0
       Poster Edges 11.0
       Radial Blur 11.0
       Radiance 11.0
       Range 11.0
       Read Watermark 3.0
       Reticulation 11.0
       Ripple 11.0
       Rough Pastels 11.0
       Save for Web & Devices 11.0
       ScriptingSupport 11.0
       Send Video Preview to Device 11.0
       Shear 11.0
       Skewness 11.0
       Smart Blur 11.0
       Smudge Stick 11.0
       Solarize 11.0
       Spatter 11.0
       Spherize 11.0
       Sponge 11.0
       Sprayed Strokes 11.0
       Stained Glass 11.0
       Stamp 11.0
       Standard Deviation 11.0
       Sumi-e 11.0
       Summation 11.0
       Targa 11.0
       Texturizer 11.0
       Tiles 11.0
       Torn Edges 11.0
       Twain Acquire 11.0
       Twain Select 11.0
       Twirl 11.0
       U3D 11.0
       Underpainting 11.0
       Vanishing Point 11.0
       Variance 11.0
       Variations 11.0 (11.0x001)
       Video Preview 11.0
       WIA Support 11.0
       Water Paper 11.0
       Watercolor 11.0
       Wave 11.0
       Wavefront|OBJ 11.0
       Wind 11.0
       Wireless Bitmap 11.0
       ZigZag 11.0
    Plug-ins that failed to load: NONE
    Flash:
       Connections
       Kuler
    Installed TWAIN devices:
       WIA-hp officejet 6100 series
       hp officejet 6100 series TWAIN

  • Get error when checking out jsp file from cvs when Jdev is running in linux

    I have JDev 9.0.3 andd CVS running in linux with same build version.
    When I check out a project one jsp does not show up in the IDE but shows in the file folder correcly when I edit it thru vi.
    I get this error when I try to edit in Jdev.
    java.lang.NullPointerException
         at oracle.jdevimpl.webapp.html.HtmlSourceNode.reopen(HtmlSourceNode.java:159)
         at oracle.ide.model.TextNode.open(TextNode.java:150)
         at oracle.ide.model.TextNode.acquireTextBuffer(TextNode.java:375)
         at oracle.jdevimpl.webapp.html.HtmlSourceNode.getInputStream(HtmlSourceNode.java:239)
         at oracle.jdevimpl.webapp.editor.jsp.JspPreviewer.updateDocument(JspPreviewer.java:344)
         at oracle.jdevimpl.webapp.editor.jsp.JspPreviewer.open(JspPreviewer.java:161)
         at oracle.ideimpl.editor.EditorManagerImpl.openEditorInFrame(EditorManagerImpl.java:648)
         at oracle.ide.editor.EditorUtil.openExplicitEditorInFrame(EditorUtil.java:33)
         at oracle.ide.cmd.OpenEditorCommand.doit(OpenEditorCommand.java:45)
         at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:363)
         at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:115)
         at oracle.ideimpl.editor.EditorManagerImpl.handleEvent(EditorManagerImpl.java:1902)
         at oracle.ide.IdeAction$1.run(IdeAction.java:579)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:149)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:332)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:126)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:93)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:88)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:80)

    Hi,
    When you are starting service in OS, you are actually starting the maxdb instance service .
    You can set it in auto mode so that you will not get this error.  The OS service only establishes the connection to SAP.
    As a part of CS install, from CSADMIN part it is just required to send the certificate successfully to OAC0.
    Normally no activity is required to be done to under SICF from CS install point of view.
    Anirudh,

  • Suddenly getting "unsupported image fomat" on RAW files that have been working perfectly.  How do I fix it and can I get those images back?

    I am suddenly getting "unsupported image file" for RAW images that have been working just fine.  How do I fix this and how do I get those images back?  Version 3.4.5, Canon 7D, everything up to date and no updates since files were loaded into Aperture.

    Would it help to buy a separate external hard drive for Aperture?
    That would be by far the best solution. And it would make the backup easier. You could include the "Aperture" drive in your Time Machine backup. With the original files stored on your Time Machine volume there is no way that Time Machine could back them up.
    Use Disk Utility to format the new drive "MacOS X Extended (Journaled)".
    Set the "Ignore Ownership on this Volume" flag. (select the drive in the Finder, use "File > Get Info ⌘I)
    In the "Get Info" panel your drive should look like this:

  • I recently purchased a camera that creates RAW files not currently acceptable to my PS CS5I downloaded Adobe Camera RAW 6.7 but can't get it to process my RAW files.

    I am on a Mac running OS 10.9.5.  I run Photoshop CS5 12.1 x64. When I tried to download AdobeCamerRaw -6.7 I got a message the AdobePatchinstaller couldn't be opened because the identity of the developer cannot be confirmed.  I then changed the settings in my system preferences to permit the opening of the AdobePatchinstaller.  I then closed bridge and phootshop, restarted them, but no luck.  When I view my images in Bridge I see the thumbnails of my jpg images, but instead of thumbnails of the RAW images I just get a a thumbnail that says RAW and a picture of a jewelers loop over a couple of snapshots. I used Grab to capture that logo-like thumbnail, but can't get it into this page.

    What brand and model of camera do you have?

  • Getting error when running the jar file..

    Hi All,
    I am new to executing jar file..Actually i have one class which contains the following code.
    import com.documentum.fc.client.DfClient;
    import com.documentum.fc.client.IDfClient;
    import com.documentum.fc.client.IDfSession;
    import com.documentum.fc.client.IDfSessionManager;
    import com.documentum.fc.common.DfLoginInfo;
    import com.documentum.fc.common.IDfLoginInfo;
    import com.documentum.fc.common.DfException;
    import com.fidelity.ftg.ereviewg2.migration.util.MigrationResource;
    * This class is used for creating docbase connection
    * *@type* DocbaseConnection
    * *@author* a405304
    * *@see*
    public *class *DocbaseConnection {
    //public static ResourceBundle resource;
    IDfSessionManager sMgr = *null*;
    IDfSession session = *null*;
    String docbaseName;
    *private* *static* DocbaseConnection +docbaseCon+;
    * Constructor for DocbaseConnection
    * *@throws* DfException
    * *@throws* Exception
    *private* DocbaseConnection()*throws* DfException, Exception{
    //ResourceBundle bundle = ResourceBundle.getBundle(Constants.RESOURCE_PATH,Locale.getDefault());
    MigrationResource bundle = MigrationResource.+getBundle+();
    String userId = bundle.getString("DOCBASE_USERID");
    String password = bundle.getString("DOCBASE_PASSWORD");
    docbaseName = bundle.getString("DOCBASE_NAME");
    IDfClient client = DfClient.+getLocalClient+();
    sMgr = client.newSessionManager();
    IDfLoginInfo loginInfo = *new* DfLoginInfo();
    loginInfo.setUser( userId );
    loginInfo.setPassword( password );
    loginInfo.setDomain("");
    sMgr.setIdentity( docbaseName, loginInfo );
    session= sMgr.getSession( docbaseName );
    System.+out+.println("# Connected to Docbase: "+session);
    }Now i create the jar file whose name is docbaseconnection.jar
    Now when i am running this jar file by using the following command then i am getting the following error..
    C:\JAR_FILES>java -jar docbaseconnection.jar
    Exception in thread "main" java.lang.NoClassDefFoundError: com/documentum/fc/client/DfQuery
    For running this docbaseconnection.jar file i need the following thing in classpath...
    C:\Program Files\Documentum\dctm.jar;C:\Program Files\Documentum\Shared\dfc.jar;C:\Program Files\Documentum\Shared\log4j.jar
    I already add this jar files in the classpath of environment variables..Then also i am getting the same error..
    Kindly help me...........

    Well, let´s supose your manifest is defined as I did in my previous post. So, your directory base should be something like:
    C:\dir
    docbaseconnection.jar
    dctm.jar
    dfc.jar
    anotherlibraries.jar
    But, let´s supose you want something like
    C:\dir
    docbaseconnection.jar
    lib (folder, which contains dctm.jar, dfc.jar, etc)
    Then you should change the class-path of your manifest to
    Class-Path: ./lib/dctm.jar ./lib/dfc.jar
    That´s what I meant

  • Getting  error when testing Proxy to File interface

    Hi Guru's,
    While I am testing a Proxy to File Interface, using SPROXY transaction i am sending a message from  R/3 to PI.
    the message showing successful in R/3 Moni,but in PI moni I am getting the following Error..
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Determination
      -->
    - <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>No receiver could be determined</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    In this inreface, I am suppose to send the mesasage to only one Target system(ftp server) . i have checked in ID part also,
    every thing is clear in ID. Can any body please tell where the mistake might exists...
    Thanks in advance..
    Regards
    Raj

    Hi,
    No receiver could be found means Check your Receiver Determination. Activate and update cache. Asysnchronous messages can be manually restarted.
    have you seen this threads,
    NO_RECEIVER_CASE_ASYNC
    No receiver could be determined
    regards,
    ganesh.

  • Am suddenly getting error code 3250 when trying to download certain podcasts...not all, just some. How can I fix? Help.

    Am suddenly getting error code 3250 when trying to download certain podcasts...not all, just some. How can I fix? Help.

    I am getting the same error, and have been, since the last iTunes update.     Driving me crazy, as some podcasts download without issue, others won't download at all, and get the 3250 error code.

  • Error in BPM - Error when processing node '0000000065' ParForEach index

    Hi All,
    I have an issue .. I have done 1:n mapping successfully and would like to place the Send step in loop instead of a Block .. The reason being I have the count of how many times the Send step should executed for multiline.. I need to receive an Acknowledgement for each send step.. If I dont receive the required number of Acknowledgements then .. I need to revert back some Creations which is a business requirement ..
    So .. I have initialized a container operation variable i to '0' .. Then the loop condition is i < count .. Send the multi-container .. Receive the Response .. If dont receive the desired response for any one of the multi-line then I need to do a cancellation process in a loop again .. So .. now I am getting an Exception "Error when processing node '0000000065' (ParForEach index 000000)
    Message no. SWP088" in the loop step ..
    It is fine if somebody can suggest alternate logic can be applied as well but first preference to use a loop which consumes lesser system resources ..
    Kindly look into the Issue
    Regards,
    Raj
    Edited by: raj2112 on Sep 21, 2010 2:34 PM

    if you use a loop step, you will send one message per time. ussing block step you have parallel processing ussing ParForEach. now is for  X reason the item cannot be created, do a roll back in the target system. the problem here you will do the rollback once the last message reach.
    the other posibility is to handle application ack in the sender step. it will let you know it the message was processed success and this ack could be the end condition of your block step. but you cannot use this with loop step.
    take a look to this
    http://help.sap.com/saphelp_nw04/helpdata/en/55/65c844539349e9b1450581ab44a5e6/frameset.htm

  • Soap response Error when processing XML CF.

    Hello,
    I have problems with soap response and wondered if you could give some advice.
    Every time I send my message via soap I get the following error:
    com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Error when processing XML CF.
    Is it possible that the communication is aborted and  my response message mapping is never started?
    (Additional info: I tried to create an integration process and am not able to evaluate the response.)
    Thanks a lot for your help.
    Regards,
    Julia

    hi,
    do you see any more error details in :
    http://xiserver:port/MessagingSystem/monitor
    did you check logs in visual admin ?
    >>>>Is it possible that the communication is aborted and my response message mapping is never started?
    yes - if the response is not ok the mapping may not be started
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Error When Processing Picking List Script.

    Hi Experts,
    I have created Script for Picking List,
    I am getting the below error when processing ...
    Error Info...   VN 073: Errors occurred while processing output
    Its working fine when Standard Script SD_PICK_SINGLE is used ..
    Pls Help.
    Regards

    Hi Raghu,
    Before processing your picking list form make sure you have created a output type for it and you have assigned your form name and program name to that output type. you can see this in TCODE: NACE
    Thanks,
    Pritesh

  • Error when processing your request -syntax eror in program /1BEA/SAPLCRMB_O

    Hi All,
    I have regenerated Billing Application in CRM 7.0. From then I am getting a dump on Web UI . Error as below.
    Error when processing your request
    The URL http://hostname/sap/bc/bsp/sap/crm_ui_frame/bspwdApplication.do was not called due to an error.
    The following error processed in the system: "syntax error in program /1BEA/SAPLCRMB_O".
    This Dump does not occur every time. now & then I am getting the dump but not every time. mostly it comes when I process any thing for the first time on UI.
    Please help me out to fix this dump. it is a standard program so we can not correct the program. Please let me know if there is any other way to fix this problem.
    Thanks in advance
    JM

    Hi,
    This is not a standard program, this is a generated program through billing engine. I guess you'd have to regenerate the program. Talk to your functional folks who created this.
    Regards
    Prasenjit

  • Error when processing asset under construction (AuC) for WBS element message no cj824

    Hi,
    i am getting error message when i change dates in activities.
    Error when processing asset under construction (AuC) for WBS element
    Message no. CJ 824
    i have checked related post but did not find any solution. also check SAP Note but not related to my issue.
    Please guide.
    thanks
    Sunil

    Hi Ken,
    Please check below screens:
    according to this error message AUC has some missing field or some incorrect value. but when i checked via program RAUNVA00 which will display
    Incomplete Assets - Detail List.
    but this program does not return any incompleteness.
    i found many threads and SAP Not but none of is related to my program. this problem comes when i change dates in activity and save the project.
    Please suggest what to do now.
    thanks
    Sunil

  • Error when processing

    Dear All,
    As the required configuration is done and R/3 and when i am trying to bring this application through SE80 BSP Application with HCM_Learning and execute, I am getting the following error in the Explorer Screen. Kindly request you to advice me on this. I have given the details of the error below.
    Error when processing your request
    What has happened?
    The URL http://r3devsuz.suzlon.com:8000/sap/bc/bsp/sap/HCM_LEARNING/traininghome.htm was not called due to an error.
    Note
    The following error text was processed in the system DEV : Exception condition "INITIAL_LEARNER" raised.
    The error occurred on the application server r3devsuz_DEV_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Function: LSOF_LEARNER_GET_ACTIVITIES of program SAPLLSO_FRONTEND
    Method: ONINITIALIZATION of program CLO267CI12QAAMONPBLHCNROVQJS5CP
    Method: %_ONINITIALIZATION of program CL_O267CI12QAAMONPBLHCNROVQJS5CP
    Method: DO_REQUEST of program CL_BSP_PAGE===================CP
    Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP

    Hi Ravi,
    Since your The termination type was: RABAX_STATE
    Goto the Tcode ST22 and check for the ABAP Dump analysis.
    Also the initial page for the BSP application "HCM_LEARNING" is "leso.htm".
    Did you activate the service? in the Tcode SICF.
    Hope this helps you.
    Regards,
    Subbu.

Maybe you are looking for