PSE9 thumbnail problem

PSE9 generates thumbnails of old photos but not recently loaded or edited ones. Help please?

Sorted this out by discovering how to repair catalog
ue. thanks

Similar Messages

  • Has the duplicate erroneous thumbnail problem been resolve in the current Elements software?

    I have used both Elements and Lightroom in the past, but have dropped both because of the redundant thumbnails of the same photo when they are moved from one folder to another.  Since the complete file only resides on one place other thumbnails are present but only serve to complicate finding the actual file.
    I purchased a new Lightroom, but the problem still exists with the current software. 
    My questions regard the handling of files within Elements.  I have 50,000 photos in my inventory and with a work flow that requires moving existing photos from one folder to another, I can not afford to generate erroneous thumbnails with each subsequent move.
    Has Adobe addressed the duplicate and erroneous thumbnail problem in the current Elements software?  Does the use of Bridge avoid this problem?  Is Bridge available within Elements?  Is Camera Raw available within Elements?  What is the annual cost of Elements if procured thru Creative Cloud without access to the full Photoshop program?
    Jerry

    Gray Drake wrote:
    I have used both Elements and Lightroom in the past, but have dropped both because of the redundant thumbnails of the same photo when they are moved from one folder to another.  Since the complete file only resides on one place other thumbnails are present but only serve to complicate finding the actual file.
    I purchased a new Lightroom, but the problem still exists with the current software.
    My questions regard the handling of files within Elements.  I have 50,000 photos in my inventory and with a work flow that requires moving existing photos from one folder to another, I can not afford to generate erroneous thumbnails with each subsequent move.
    Has Adobe addressed the duplicate and erroneous thumbnail problem in the current Elements software?  Does the use of Bridge avoid this problem?  Is Bridge available within Elements?  Is Camera Raw available within Elements?  What is the annual cost of Elements if procured thru Creative Cloud without access to the full Photoshop program?
    Jerry
    Jerry,
    I don't understand your problem. Moving files from within either Elements or Lightroom doesn't create redundant thumbnails.
    There has been problems in older versions of Elements where the 'Folders' view was corrupted and did not show the real content of the folders.
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Folder_Location_view
    If that's what you have experienced, the problem is solved since PSE11.
    Without knowing exactly your workflow, it's difficult to understand your problem. Moving files from folder to folder require taking into account the possibility of files with the same name already existing in the destination folder. Do you get files renamed with a suffix in the destination folder ?
    - Bridge is not available with Elements
    - The camera raw version in Elements is limited to the 'basic' and 'detail' panels
    - Elements is not available in the Cloud subscriptions.

  • PSE9 Printiing Problem HP Photosmart 410

    When I try to print from PSE9 to my HP Photosmart 410 All-in-One, the fax window opens. Have uninstalled both the printer and PSE9 and problem still exists. It did work until recently. Any help appreciated.

    This came up yesterday as well. Here is the fix, also for PSE 9:
    http://forums.adobe.com/thread/980728?tstart=0
    Please let us know how you make out.

  • Does upgrading from Premiere Elements 12 to 13 solve the Organizer thumbnail problem?

    Thumbnails do not show up after importing clips into Premiere Elements 12 Organizer.  I've tried right clicking on a clip and telling it to recreate the thumbnail but it doesn't work. I've tried refreshing and repairing the catalog.  I've even started a new catalog and reimported the files.  The system says it's creating thumbnails but they still do not show up.  Does upgrading from Premiere Elements 12 to 13 solve the Organizer thumbnail problem?

    listiak
    That is one of those questions best answered by evaluating Elements Organizer13 with your specific files in your specific computer environment.
    Each of the Elements Organizer versions often appears to carry along its own baggage.
    One of the things that came up about Elements Organizer 13 thumbnails recently was a problem with files with MPEG2
    video compression. The Adobe word on this was that this is only an Elements Organizer 13 tryout issue...supposed not to exist
    in the purchased version.
    ATR

  • PSE9 & thumbnail order in organizer

    Sometime during the last week I allowed PSE9 to update.  After the update I noticed that new files added to the organizer are list according to their extension first and then by the file name.  All of the files that were added prior to this are arranged by file name and then extension which makes much more sense.  Is there a way (without reinstalling PSE9 which is a copout imo) to set the way thumbnails are organized?  My preference looks like this:
    img_0001.jpg
    img_0001.cr2
    img_0002.jpg
    img_0002.cr2
    It is currently showing up as this:
    img_0001.jpg
    img_0002.jpg
    img_0001.cr2
    img_0002.cr2
    When you are uploading a couple hundred files at a time this doesn't seem to make sense.  Please help!!!

    The date appears to be correct in both.  The time taken is different.  The CR2 is appearing as 5 hours earlier than the jpg.  After reading your comment I searched the threads and saw that several people were linking the issue to the use of the backup/sync feature.  I had never used that feature, but last week I decided to see what it was about.  It started to do the sync, but I knew I wouldn't have enough space online and cancelled it.  I don't know if that has any effect on this or not.

  • Thumbnail problem

    since my last update, I see on my thumbnails several times the same old picture.
    When I click on it,  the old picture dissapears andI can see the original ones. When I open full screen view, the pictures do not show at all. Anyone experienced this? How can I revert it?
    since my last update, I see on my thumbnails several times the same old picture.
    -version of iPhoto : Iphoto'11 version 9.1.5
    - What version of the Operating System. Mac OS X version 10.6.8
    - Details. What were you doing when theproblem arose? Appeared after last software update
    - Did it ever work properly? Yes
    - Are there error messages? No
    - What steps have you tried already tosolve the issue. If I drag en drop the picture to desktop and delete it from Iphoto and then re-enter it in Iphoto by dragging it from the desktop into Iphoto the problem is solved. But I am talking about thousends of photos, so almost impossible to repeat this action for all these pictures
    In full screen view of the thumbnails, the old picture dissapears and a blanc picture is seen, as you can see on the screenshot
        Thanks for your expert help
    JC

    I have tried what you said, backed up with time capsule and relaunched iPhoto.
    It says after a while "rebuilding library; 20179 versions restored" but than stops, nothing happens.... (even after 7 hours!)
    I have tried to find back all my pictures on the time capsule, and in library>pictures>iPhoto i cannot find them!!! I only see the icon of iPhoto and it calculates 49,3 GB on disk but how can i get them back in iPhoto....
    please help....
    thanks
    JC

  • PSE9 Installation problems

    I've just purchased a tablet that comes with a host of programs, one of which is PSE9, which I am trying to install, with no luck. The installation almost completes but stops at "Shared Technologies" and rolls back the installation. I've tried multiple times with the same problem. I've gone though the installation problem checklist and the problem still persists. I've closed all other Adobe programs and triple checked the processes tab of the Task Manager to make sure no other Adobe programs are running. I've also tried the advice offered in this thread with no luck. I do not run any other Photoshop programs; this is my first purchase in quite some time.
    I'm not very good with computers, but I am running Windows 7 64-bit with 32.2GB free.
    Please help! I'm at the end of my rope.

    I should have been more clear! I mean I have purchased a drawing tablet that comes with a CD to install PSE9, not a handheld tablet.
    @Bill: I might have missed something when shutting off my anti-virus, so I'll try it again and report back.
    Edit: Nope, it still rolls back the installion at Shared Technologies even when I've made sure my anti-virus is completely off.

  • Spry Image Slideshow with Filmstrip, thumbnail problem in Safari

    I'm adding a spry image slideshow with filmstrip in Dreamweaver CS5 on a Mac. I have a folder of images with a large and small (Thumbnail) version of the photos I'd like to use. I've relinked all of the images that are inserted as placeholders by the widget: Source for thumbnail versions and link for large versions. When I preview in Firefox all is well. When I preview in Safari, the filmstrip has white boxes rather than the thumbnail images. Everything else is fine. (It previews correctly in Safari before I change the links.) What am I doing wrong?

    I have a similar problem. I've added a note to reference your problem. I've not got an answer to date.
    Cliff

  • PSE7 Thumbnail problem  Offline Media bug(?) in restoring from PSE5 to PSE7

    My problem is this: (It is similar to http://www.adobeforums.com/webx/.59b7e77a, but the solution there is not applicable to my situation; at least I do not think so)
    I have used the Photoshop Elements 5 backup method for storing the photos and catalog information, and I am trying to get it working in PSE 7 on my reformatted computer. Upon restoring the information, however, although all my files are unpacked at the location I choose, my entire catalog is listed as offline in PSE7 (with the red offline symbol shown on each ?-marked thumbnail). This seems to what is called Wrong drive type in catalog on the psedbtool homepage (http://www.johnrellis.com/psedbtool/). Sure enough, checking the properties of the photo-files in the catalog, the old D:\... path is shown. I do not have two partitions on the computer anymore, however, so anything listed as D:\... is surely external (if not, as you note, properly denoted as offline).
    The problem is listed on the psedbtool homepage as minor in effect, which sounds hopeful, but they are major at the moment to my subjective eye, since I cannot access any of my photos from PSE. The data is there, of course, but I cannot reconnect using the proper command, since it does not label anything as missing files. Only "offline". What I would like to do, if possible, is to rewrite the metadata so that I can tell PSE where my files are, since the internal structure seems to be perfectly correct. (Unfortunately, I cannot redo the procedure since I do not have access to the original catalog files anymore, only the photos themselves in addition to the backup file. I hate to lose all my metadata, however, including all my albums etc.)
    Immensely grateful for a suggestion on how to fix it.
    //Niklas
    PS here is the relevant section of the output log from psedbtool:
    ****** Volumes with warnings: 1
    PSE Volume Table
    Path used by PSE : F:
    Status : online
    Total files : 0
    Total files missing : 0
    Description : F:
    Serial : 6464-6262
    Drive_path_if_builtin: F:
    Type : builtin_drive
    Id : 149876
    ***** WARNING ***** : Drive in catalog missing
    Path used by PSE : [D:]
    Status : offline
    Total files : 8976
    Total files missing : 0
    Description : D:
    Serial : D:/My Pictures/2007/2007 01
    Drive_path_if_builtin:
    Type : readonly_drive
    Id : 1208
    Path used by PSE : C:
    Status : online
    Total files : 14
    Total files missing : 0
    Description : C:
    Serial : B043-DF50
    Drive_path_if_builtin: C:
    Type : builtin_drive
    Id : 1096

    Thank for the quick response!
    The full output file is attached below (sorry, my bad), and the photos are restored in subfolders under the path C:\Documents and Settings\Niklas\My Documents\My Pictures\Foton t om september 2008.
    As may be noted in the output below (which is changed from the one posted before, in addition to being the full output this time), I have managed to get some photos reconnected. Reading through your help FAQ I noticed that I could make the offline content online by trying out Quickly reconnecting large numbers of photos suggestion 4 (http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Quickly_reconnecting_ large). It worked sort of, but unfortunately I have almost a thousand folders to go through (due to the import option creating a new folder for each day a photo is imported), so I wonder if there may be a better way of re-pointing the catalog.
    Again, thanks!
    //Niklas
    Total output-fil psedbtool:
    psedbtool version 1.04
    Opening catalog C:\Documents and Settings\Niklas\My Documents\My Pictures\Foton t om september 2008\My Catalog 1\catalog.pse7db
    Photoshop Elements version: 7
    Total files : 8989
    Total files missing : 823
    Total files offline : 6233
    ****** Volumes with warnings: 1
    PSE Volume Table
    Path used by PSE : F:
    Status : online
    Total files : 0
    Total files missing : 0
    Description : F:
    Serial : 6464-6262
    Drive_path_if_builtin: F:
    Type : builtin_drive
    Id : 149876
    ***** WARNING ***** : Drive in catalog missing
    Path used by PSE : [D:]
    Status : offline
    Total files : 6233
    Total files missing : 0
    Description : D:
    Serial : D:/My Pictures/2007/2007 01
    Drive_path_if_builtin:
    Type : readonly_drive
    Id : 1208
    Path used by PSE : C:
    Status : online
    Total files : 2756
    Total files missing : 823
    Description : C:
    Serial : B043-DF50
    Drive_path_if_builtin: C:
    Type : builtin_drive
    Id : 1096
    Path used by PSE : C:\Documents and Settings\Niklas\My Documents\My Pictures\Foton t om september 2008\My Catalog 1
    Status : online
    Total files : 0
    Total files missing : 0
    Description : database relative
    Serial : amoc:database_relative_volume
    Drive_path_if_builtin:
    Type : database_relative_drive
    Id : 2
    Windows Drives
    Drive Type Serial Path
    C: builtin_drive B043-DF50
    D: readonly_drive 0000-0000
    Z: network_drive 9108-0A20 \\EvaNiklasNAS\Niklas\

  • KM thumbnail problem

    Hi everyone,
    I'm using upload codes of this wiki:
    Link: [KM Library - Reusable Component for WebDynpro Java|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/km%2blibrary%2b-%2breusable%2bcomponent%2bfor%2bwebdynpro%2bjava]
    but, after uploding file I can not see the thumbnail of the file in KM navigation iview.
    any suggestions?

    Hi,
      Thanks for ur quickreply. I already check with administrator login.
    I'm getting problem whenever setting permision to KM Content (folder/document)
    That user selection is disable state.
    Thanks,
    Santhosh D

  • IPhoto thumbnail problem

    I'm running iPhoto 08.  Normally, when I'm in "Photos" under "Library" I see a page of thumbnails of my photos.  Something has happened so that now I just see a single photo.  If I click 'edit' then I get the thumbnails in a bar up top - but I can get them back tiled as they used to be. I've looked at other answers to similar problems and have tried holding down command/option and using the rebuild thumbnails options (there are two - one for 'small thumbnails, one for 'all thumbnails') - neither one has worked. Any other ideas? I'm not very saavy, so pls provide as much info as possible! Thank you so much.  I'm running OS X (version 10.8.2).

    Try rebuilding the database file as follows:
    Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • BIG Thumbnail problem

    The last few weeks Aperture started driving me insane. After massive permission issues and ending up rebuilding my library - at least now I can access it again.
    HOWEVER - I still have issues with the thumbnails - they keep rebuilding every time I open Aperture. Some of them load successfully then disappear again, others don't load at all.
    Also selecting all images in a project and selecting "generate thumbnails" doesn't solve the issues.
    Any ideas appreciated!!! Thanks!

    in my case it's managed, and the import is via the import dialog that opens when the memory card is inserted into the card reader. I've never had this problem before with any previous imports of lumix LX3 photos, nor 40D photos. Don't know what changed. I tried repairing permissions too. Will try a few more things.

  • Windows 7 x64 and PDF thumbnails problems

    I have CS5 and Acrobat 9 and under Vista x32 I could see the pdf thumbnails nicely.  Yesterday I installed Windows 7 x64 and now all I can see are the Adobe icons.  I read some other threads that describe opening up the files through acrobat and then changing to either large icon or extra large icon to fix the problem.  This works, but when I go back through windows explorer everyhting is back to just icons.  I have made sure that explorer is set to always view thumbnails and I don't have this problem with anyother file types such as Word documents or image files.  I have also tried rebuilding the installation as anthoer poster had suggested.  Has anyone found a permanent fix for this?
    Thanks,
    Troy
    University of Nebraska - Lincoln
    Department of Chemistry

    Thanks for the link to the fix (by Pretentious Name . com).
    I note that over a year has passed since you posted this solution, and Adobe has still not corrected the problem.
    Problems, errors, and omissions in software are normal and acceptable - what is not acceptable is that Adobe choses to not take action to correct certain problems, especially when the user community identifies both the cause and the solution to the problem.
    The folks at Adobe shoud take a close look at this web page: http://www.pretentiousname.com/adobe_pdf_x64_fix/ - it contains a complete and well-documented description of both the cause of the problem and the solution to the problem.

  • When is the dailymotion thumbnail problem going to be fixed

    In Dailymotion, the thumbnails are blacked out even with the age gate off. I have tried all the fixes found here in the support, but none of them work. It all started with the last update of firefox, so I assume it has something to do with that. Dailymotion works fine in IE and other browsers. Firefox is the only one with the problem. I would like to get it resolved if anyone can help.

    Yes the age gate is off

  • Thumbnails problem

    Hi guys!
    I need to make thumbnails of fixed size from the image that user selects and store them into DB.
    Putting image into DB is no problem, but what about scaling?
    As I'm storing them into BLOB, I need byte[ ](Is there any other way with DB2?). So the question is how to operate between classes that can do scaling stuff(by the way, wich is worth to use?) and byte[ ] array.
    I looked in forums but couldn't find anything.
    Any ideas?
    Thanks in advance

    Obviously you are not looking hard enough.
    Try the java2d forum.
    http://onesearch.sun.com/search/developers/index.jsp?col=devforums&qp_name=Java+2D&qp=forum%3A20&qt=thumbnail

Maybe you are looking for