PSE9 trying to make a blank canvas 10x8 inches but when I change values the number start changing.

I've been trying to make a new canvas for a photobook that is 10x8 inches - i've read tutorials but for some reason when I type in the width and height it won't accept it. The numbers just keep changing.
I go file, new blank file and type in there.
What am I doing wrong?
Thanks.

Good day!
Please try posting over at
http://forums.adobe.com/community/photoshop_elements
Regards,
Pfaffenbichler

Similar Messages

I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera l

I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks

Apple most likely has the same poor taste that Microsoft does when it come to defaults. Microsoft likes to hide things like settings, preset, folders etc from normal users think the dumb or something else. If Apple also hide things you will have to make some system setting changes that will allow Finder to do it job and find it for you.

I'm trying to buy more storage on my iPad but when I get to the "buy" button, it has my old Apple ID and I can't go any farther. I've changed my Apple ID on all my devices, logged out, logged back in, rebooted, etc., but that one area still has old one.

I'm trying to buy more storage on my iPad but when I get to the "buy" button, it has my old Apple ID and I can't go any farther. I've changed my Apple ID on all my devices, logged out, logged back in, rebooted, etc., but that one area still has old one.

You can't buy more storage on an iPad. You are referring to space on iCloud and that probably won't accomplish what you are trying to do.

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library option and check the Selected Artist - on

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top,
it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library
option and check the Selected Artist … one.
I have changed the Sync option to Manually sync, but that does not help.
How can I change this to the second option?
Thanks.

There is a checkbox above those two options for how to sync. It says Sync Music; it enables automatic syncing. That box needs to be checked before you can select from the two options for how automatic syncing is performed.
NOTE: If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting). Please post back with more details about your situation.

I am trying to download/install Creative Cloud on Windows7 but when I click on the "Run" button nothing happens

The Creative Cloud appears as if it is downloading/downloaded, so I go to click on "Run" and my mouse and website window border flashes for a few seconds and then stops with no signs of installing the Creative Cloud.
Can you give me some indication as to why this is happening?
Thank you in advance!

Please refer to :
Troubleshoot CCM Applet installation and download
Problems with Creative Cloud (apps not starting)
Downloading and installing desktop apps from Creative Cloud
Hope it helps you.
Regards
Rajshree

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. What is the best way to do this

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this

@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe

My ipod shuffle cannot be restored not by the itunes nor by the reset utility it tolds me that it is in recovery mode , i tried to make every thing to resolve it but i can not what can i do ?

my ipod shuffle cannot be restored not by the itunes nor by the reset utility it tolds me that it is in recovery mode , i tried to make every thing to resolve it but i can not what can i do ?
notice : when every time try to reset it by the retore utility it tolds ( your i pod obtaining information from your ipod)
and when i tried to restore it by the itunes it tolds ( there is an unknwon error num 1415)

Now the iPod is unusable with the Recovery mode loop. The full error below:
"iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes."
I can see my IPOD under devices on the left pane of iTunes while the error displays. But when I click OK, the IPOD disappears under DEVICES as does the DEVICES category.
and also when i remove my ipod from computer it isn`t light any light never the battery show

Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)

Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)

Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W

Trying to make an image of a Server but getting error message

I'm trying to make a disk image (.dmg) of an XServe. I boot the XServe off of an external drive, fire up disk utility and choose File>New>Disk Image from <server volume>
Then I choose where I want the .dmg file to be created. It doesn't matter where I try to put it (one of the additional two unused hard drives in Bay 2 or Bay 3, or on a network volume), I get an error message: "Unable to create <server volume> (Resource Busy)."
What am I doing wrong? Or what do I not understand yet?
Thanks.

Hi.
Tried another tactic. I booted up the XServe into Target Disk Mode on a MacBook Pro. Then fired up Disk Utility again and chose File>New>Disk Image from "server volume". It started, but erred out with the "Resource Busy" message. Then I tried the same thing but this time instead of "server volume", I chose File>New>Disk Image from "698.6 GB AAPL FireWire Target Media". It still erred out with the "Resource Busy" message. Then I tried File>New>Disk Image from Folder, and then chose "server volume", and then selected where to save the .dmg and it started to create the image, but erred out with "Unable to create "server volume" (No such file or directory)." Then I tried "Disk Image from Folder" again, but this time chose "698.6 GB AAPL FireWire Target Media", selected where to save the .dmg, and once again, it started to create the image, but erred out again with "Unable to create "server volume" . I'm at a loss. I am unable to create an image of the XServe HD and I need to. Does anyone out there have any ideas? Thanks.

I'm trying to make a purchase at itunes, but when I finish asking the card data to the message comes into contact support itunes appears, can you help me?

I'm trying to make a purchase at itunes, but when I finish asking the card data to the message comes into contact support itunes appears, can you help me?

Do exactly what it told you to do.
Contact itunes support

I'm trying to make a ring to for iPhone and about 20 sec into the playing of the song it fades out and goes silent. What am I doing wrong? Thanks

I'm trying to make a ring to for iPhone and about 20 sec into the playing of the song it fades out and goes silent. What am I doing wrong? Thanks

Im not sure what garage band is, but i can tell you the way apple recommends making ringtones. Highlight a song in iTunes, right click and select get info. Goto the options tab and youll see the time lengths (write down the ending time) for the start time type in where you want the ringtone to start, ringtones can only be 30 sec long so make the ending time 30 sec later. Exit it out of the info and while song highlighted goto the "advanced" tab at the top of iTunes where you will see an option that says "create aac version". after creating the aac version you will have a duplicate song in your iTunes, change the original back to the correct time length. Take the 30 sec aac version and drag it to your desktop, right click the icon and click "preferences" You will then be able to change the name of the file which will be somethign to the effect of "songnamehere.m4a" you just change the m4a to m4r. you now have a ringtone, drag the new file to iTunes where it will pop up in a new tab labled ringtones. If you cannot change the name of the file when it is on your desktop let me know and i will give you instuctions how to be able to change it. Once you get it figured out you can use any song you have on iTunes to make a ringtone.

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

I am trying to set up my new iphone 4s, but when i try to log into itunes it keeps coming up with server error. What do i do?

I am trying to set up my new iphone 4s, but when i try to log into itunes it keeps coming up with server error. What do i do?
<Edited by host>

Some free advice. If your son is 8 years old, put him on your account, and set parental controls so that he cannot accidentally run up giant charges within the games.
If your son is 25 years old, get him his own AppleID and make him responsible for his own bills.
In between ... use your judgement.

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

Trying connect my itunes remote from my iphone and when it gives me the passcode there is no place to put it in

trying to connect my itunes remote from my iphone 4 but when it gives me the passcose there is no place to put it. And when it is connected to my computer it won't as well

jghowse wrote:
I did see this but it does not have a place to put in the passcode.
if i'm not mistaken, the instructions say
Setting up Remote app
Remote app 2.0 or later uses Home Sharing for setup and control with iTunes 10.0.1 and/or Apple TV (2nd generation).
iTunes (10.0.1 or later)
Open iTunes on your Mac or PC.
Turn on Home Sharing in iTunes by going to Advanced > Turn on Home Sharing
Connect iPhone, iPad or iPod touch to a Wi-Fi network that is connected to the local network that your Mac or PC is also connected to.
Open the Remote app (software version 2.0 or later) on your mobile device.
Turn on Home Sharing in the Remote Settings screen. Make sure to sign into the same Home Sharing account you used to sign in to from iTunes on your computer.
where does it mention entering a passcode ?

PSE9 trying to make a blank canvas 10x8 inches but when I change values the number start changing.

Similar Messages

Maybe you are looking for