PSE9 - Watch Folders in multiple catalogs - new files not detected

I run PSE9 and have 2 catalogs (both in a "Custom Location"), one with photos and one with pdf documents.
I have set up "Watch Folders" in each catalog, but I never get any notification about new files.
Service "AdobeActiveFileMonitor9.0" is running - with Local System Account.
Are there any logs to check?
Does watch folders rely on the archive attribute of files?
Does it matter which catalog I have open?

Hi,
Thanks for the feedback.
function(){return A.apply(null,[this].concat($A(arguments)))}
PSE9 Organizer: on wakeup after system sleep it does not recognize external disks
I tried this on my Win 7 machine with a USB device but it worked fine for me... Which OS are you on ?
Also, can you verify if the issue with the watched folder service is persistent if you don't restart the file monitor service each day? Or is it resolved after restarting the service once ?

Similar Messages

  • WRT 110 - New Router not detected

    I am having problems with the setup wizard.  Im getting "New router not detected".  It's all setup correctly.  I've reset modem, router and rebooted 100 times atleast.  I can get on the internet when the modem is conected through the router.  Also, I cant get to the 192.168.1.1 router setup.  I have set up other linksys routers without problems.  We are on Time Warner cable internet.  Please help before I smash this thing.

    I have an older Linksys (twin antenas) product so bought this for my son in Ohio.  He tried to connect the router using his laptop and could not do it...after calling support (Punjab in India) they could not resolve the problem or begin to figure it out.  After watching a 6 year old on YouTube hook up a router, I figured it couldn't be that hard so I told him to send the WRT 110 to me along with his laptop. 
    After trying the install myself (using the supplied CD), I could not connect to the internet via the wired laptop-router-modem either.  So I figured the wireless device of the laptop may be interfering with the router.  So I went to Control Panel>>Network Connections>> and right clicked on "Wireless Connection" and clicked "DISABLE".  After that, the laptop DID connect to the internet via the ethernet cable. 
    When I tried to login to the new wireless network using another laptop, I could not connect after repeated attempts using the letter "O" and the number "0" of the WEP code generated by the CD install.  I finally COPIED and PASTED the WEP code to a Word document, saved to a stick, then transfered the doc to the wireless laptop.  After COPY and PASTE of the WEP code to the LOGIN >>>SUCCESS. 
    The wireless connection works fine two floors away from the router as does my old antenna router did, so the "range" problem reported by others is a mystery to me.  Don't know why the "support" couldn't have solved this problem....I'm not a real computer nerd, but can do "trial and error" fixes. 
    Bottom line: router works fine and is better looking than the "antenna" ones but who cares???  I go for the blinking lights anyway <g>

  • Creating AppleScript That Watches a Folder and Adds New Files to iTunes

    Is it possible to create a AppleScript that watches a folder and automatically adds any new files placed into the folder to my iTunes library?

    Probably. You can take a look through Doug's AppleScripts for iTunes and see if there's anything pre-existing you could use or modify.
    An alternative might be Hazel which says it can do that. It's not free, but if it works it would probably be a lot easier.
    Regards.

  • Error running exe to write to exel file: Error 7 New file not found

    Hello!I have this problem, i've looked everywhere and i still can't solve it. It would be great if anyone can help me.
    I built an application that writes an array to a spreadsheet file.
    Everything works fine in Labview 7.1 , i can build the exe file, but
    when i try to run it it doesn't work (it doesn't do anything although
    in Labview works perfecty well)and i have this error:
    <<Error 7 occurred at New File; Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or
    deleted, or the file path might be incorrectly formatted for the
    operating system. For example, use \ as path separators on Windows, :
    on Mac OS, and / on UNIX.>>
    I've attached the vi file and the exe file.
    Thank you
    Attachments:
    app.zip ‏167 KB

    You've made a very, very common mistake and one discussed in numerous postings. When running in development mode and using the Current VI's Path, the path to a VI would be something like c:\folder\example.vi. When built, it becomes c:\folder\app.exe\example.vi. An extra strip path is required. Look at this, this, and this.

  • New files not appearing in Yosemite

    Did a clean install of Yosemite to a new drive on a Mid 2010 Mac Pro (2.8 GHz Quad-Core/16GB RAM) and I have an issue where the OS is occasionally not showing a new file when I save one. The issue is random and intermittent, I cannot reproduce it on demand. The files DO exist and I'm not mis-saving to a different location. I know this because my workaround has been to do a spotlight search for the file in the folder where it's supposed to be. It will pop up in the search and when I back out of the search it will magically appear in the folder.
    All I can say for reproducing the error is I have only noted it coming from when I do a "Save As" or "Export" type action. Files copied using the OS itself do not exhibit this behavior. My primary programs are Adobe InDesign and Photoshop CC, it has happened on saving a new file, and on exporting PDFs.
    As near as I can tell it's YAYB (Yet Another Yosemite Bug). Thankfully, it's easily overcome. But if there is a permanent fix I'd like to know it.

    Hi
    SAP-OSS connection connection test is running fine, did you maintained your router settings proper in OSS1.
    if all those are fine, try with another suser did u face the same problem?
    Please check
    Thanks,
    Jansi

  • New files not being copied

    I have the following workflow to backup documents to a thumb drive:
    1) Get specified files
    2) Copy Finder items (to thumb drive)
    3) View results
    I originally set this up with about 15 files. Lately, I have added some new files to the first action, but they are never copied. These files are not protected by the File Vault and all disk permissions have been repaired. I cannot figure out why these newer files will not copy.
    Thanks for all your assistance.

    I just put View Results in and figured out the problem. When one of the files was added, the path was empty (I'm not sure how that happened). As a result, all files in the list "below" that file, were not copied. I fixed the path and now it works fine.
    Thanks for your help.

  • New file not created on Mac OS X

    Hi,
    Please could I ask for a bit of advice on creating a new file on Mac OS X? I am trying to create a new file and write the contents of a JTextArea to it.
    I am using this code:
    File feedbackFile = new File(saveFeedbackToFileTextFieldString);
    String feedbackTextAreaContents = feedbackTextArea.getText();
    BufferedWriter out = new BufferedWriter(new FileWriter(feedbackFile));
    out.write(feedbackTextAreaContents);
    out.flush();
    out.close(); In windows XP home edition the file is created and the text written correctly. However in Mac OS X version 10.4.11 the file is not created. If I choose a file that is already in existence then the text is written to the file correctly.
    I wondered if createNewFile() would help but I am not clear on how to use this.
    Thanks you in advance of your help.
    Best wishes,
    Jennifer

    Hi,
    I seem to have solved the problem. Here is the answer in case anyone else needs it.
            JFileChooser feedbackFileChooser = new JFileChooser();
            int returnVal = feedbackFileChooser.showSaveDialog(null);
            if (returnVal == JFileChooser.APPROVE_OPTION) {
                 File feedbackFile = feedbackFileChooser.getSelectedFile();
                 feedbackFile.createNewFile();
                 String feedbackTextAreaContents = feedbackTextArea.getText();
                 BufferedWriter out = new BufferedWriter(new FileWriter(feedbackFile));
                 out.write(feedbackTextAreaContents);
                 out.flush();
                 out.close();I got it from the [Sun JFileChooser demo|http://java.sun.com/docs/books/tutorial/uiswing/components/filechooser.html].
    Thanks,
    Jen

  • Glitches in ePub File Not Detectable in Pages Prior to Exporting

    27 April 2012
    Dear Apple Support Community:
    Greetings. I am using an updated version of Pages to create a file to be exported as an ePub. The exported file as an ePub is fine when viewed on my iPod Touch as an iBook. However, the ePub/iBook contains some blank pages that I did not insert. Whether in portrait or landscape mode, there are blank pages that should not exist. Again and again, I have deleted blank spaces at the top and bottom of pages in Pages, but the resulting ePub (displayed as an iBook on my iPod Touch) still has blank pages. When I view the pre-EPUB file in Pages, I cannot and do not detect any blank pages.
    Does anyone have any suggestions about how I can create an eventual ePub in Pages that will more closely reflect the pages and spacings in the actual, pre-EPUB file?
    Sincerely,
    Excelsus
    P.S. The few images are inline, etc., etc., and the table of contents is fine, accurate, and functional, except that it displays or lists  "section" in places that I did not mark up or stylize as "sections" in Pages.
    Message was edited by: excelsus

    Hi Anne
    I wouldn't use Sigil myself. Perhaps you should go back to basics. You seem to be formatting your ePub incorrectly somewhere. I suggest you create a short document of say 16 pages, set it up afresh, using similar chapter headings, subheadings and text paragraph styles as the original, inserting the images inline, trying out the various Anchored Objects Options as so on. Keep testing the output using the IDPF Validator and viewing the ePub on the iBooks reader (if you’re using a Mac). You’ll then discover the various ways of formatting the book to get the effect you want. It might also be an idea take an online course, such as: http://www.lynda.com/EPUB-tutorials/InDesign-CC-EPUB-Fundamentals/143324-2.html?srchtrk=in dex:1%0Alinktypeid:2%0Aq:epub%0Apage:1%0As:relevance%0Asa:true%0Aproducttypeid:2
    this course will also help you learn how to convert an ePub file to a mobi file for use on the Kindle.
    Derek

  • Satellite A300d - New battery not detected

    I recently got a new battery PA3533U-1B RS/AS for my aged Satellite A 300d.
    When I place the new battery in the laptop, unplugged, press power button, the red battery indicator flashes several times, no power.
    When i plug in the mains to the laptop, the red battery indicator stays red as-though charging, once windows has loaded the battery shows as Not Detected.
    I have checked connection and gone through device manager- unistall/install but come to no luck. This is the 3rd replacement battery I've had from this company who have a very positive review. Is it my laptop or the battery?
    I do have a good faithful 20 minutes battery that recognises every time and charges without a problem.
    If you could please help it would actually stop me from going crazy, thanks in advance :)

    Hi Paolo,
    Thanks for your reply. I have kept the battery on charge for 12 hours +, both the 2nd and 3rd battery I have received, and neither of them show as detected.
    When the laptop is off, new battery in, ac in, red light stays on for about an hour then it continuously flashes. This happens with both. After charging it won't turn on until insert ac, then when windows loads, bat not detected.
    When I put my original battery in in turns on without ac, and battery shows and info correct.
    I will speak to the dealer again, I returned the 1st battery, once i reported 2nd one faulty, he sent me a 3rd. The dealer has really positive feedback and good comment, it's just baffling?!
    Thanks again for your help.
    Daniel

  • New files not showing up in Adobe Bridge browser

    Since mid-October all new images added to "My Pictures" file refuse to show up the Adobe Bridge browser box. This is infuriating!! I've got Photoshop CS2 and run Windows XP prof. Any help is appreciated!!

    Thanks, but My issue isn't with the thumbnails..... the new folders are totally missing from "My Pictures" folder, when viewed in Adobe Bridge. I can get around this by opening individual images in the program provided with my camera, and then stipulating I want to edit it in Photoshop... but what a time sucking pain!

  • Creating new track - software catalog new product not showing up - Help!!!

    Hi,
    Creating a new track for custom development.
    A new product has been added in the software catalog in SLD.
    SLD and NWDI (netweaver 04) are on the same system.
    The new product is not showing up when trying to select in the new track, Software Components for Development section. Why??
    Does the server need to be restarted after adding a new product? This is difficult for us as SLD has production systems tied to it!!!
    Thanks in advance 
    Regards, Neeta

    Thanks - This did the trick. I have awarded points!!!!
    Regards, Neeta

  • "save as" new file not working

    My "save as" in CS5 no longer saves as a new, useable file.   It saves it as simply a "file", which cannot then be opened.  Does anyone know how to get the "save as" restored?

    Another thing:  Uncheck this option in the Windows Folder Options dialog so that you SEE the file extensions in Explorer and file open/save dialogs.  That helps reduce confusion.
    -Noel

  • New shuffle not detected by Windows

    Familiar story: I bought a new shuffle, which arrived today, and Windows doesn't detect it at all. I followed the installation procedure by the book, but no luck. I went through every step in http://docs.info.apple.com/article.html?artnum=61711 including the 5 R's (more than once), but nothing works. I've uninstalled both iTunes and the iPod software, restarted my computer, reinstalled the latest versions of iTunes and the iPod software, and restarted again. No luck. I've tried every USB port on my computer. (I have one built-in USB 1.1 port and a PCMCIA card with four USB 2.0 ports.) The iPod itself claims to be charged when I press the battery button. (They must ship these models with a full charge, I guess.) It just isn't detected by Windows at all. It doesn't show up in device manager or Explorer or the iPod Updater or anywhere else. Any suggestions would be appreciated.
    Dell C600 Latitude   Windows 2000  

    I've already tried every USB port on my computer. (I have a single USB 1.1 port built in to the computer, and a PC card that provides four USB 2.0 ports. None of them work. All five show up as having 500 mA available to them, which I think counts as "high-powered," right?)
    What do you mean when you say that I can't send it back? The return policy on the invoice says: "If you are not satisfied with your Apple purchase of a pre-built product, please call 1-800-676-2775 for a Return Material Authorization (RMA) request within 14 calendar days of the receipt of the product.…A 10% open box fee will be assessed on any opened hardware or accessory." So I thought I could return it provided that I am willing to get hit with a rather lame 10% restocking fee (which should come to about ten bucks on a shuffle purchase). Am I misunderstanding?

  • Jsp taglibs in include files not detected, throws errors, no code insight

    I have a jsp which is included in all the other jsp. it looks something like this
    taglibs.jsp
    <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
    <%@ taglib uri="http://java.sun.com/jsp/jstl/fmt" prefix="fmt" %>
    <%@ taglib uri="http://www.springframework.org/tags" prefix="spring" %>
    <%@ taglib prefix="form" uri="http://www.springframework.org/tags/form" %>
    test.jsp
    <%@ include file="/jsp/menu/taglibs.jsp"%>
    <html>
         <head>
              <title>Tours</title>
         </head>
         <body>
    <form:form commandName="testCommand">
                   <form:hidden path="tour.firstname" id="tour.firstname" />
    and so on.
    I am having 2 problems
    1. the jsp editor show errors all over the place saying
    element path not expected
    element commandName not expected etc.
    2. no code insights.
    but if i include the taglib def in test.jsp it dosn't show any error and also provides code insights. but seldom do people include all taglibs in all jsps.
    is there a way for Jdeveloper to show code insights in jsp pages which includes a jsp or like xml schemas could be added at some place(tools-pref-xml schemas) and when used anywhere, would provide code insights.

    am not sure, try with this
    <jsp:include   .../>

  • Deleting files not detected by agent

    I've created and registered an agent in iFS which is fired when a file is created or deleted.
    My agent detects the creation, but never the deletion
    public void handleEvent(IfsEvent event)     
    throws IfsException {
    if (event.getEventType() == IfsEvent.EVENTTYPE_CREATEINSTANCE {
    // Queue the event
    queueEvent(event);
    else if (event.getEventType() == IfsEvent.EVENTTYPE_FREE) {
    // proceed deletion ...
    Thanks in advance.

    Hi Scott,
    You can try resetting the iPhone, but It sounds like you'll have to restore the iPhone. This article: http://docs.info.apple.com/article.html?artnum=305744 will walk you through restoring the iPhone.
    You can reset the iPhone by holding the Home and Sleep/Wake buttons until you see the Apple logo as described here: http://docs.info.apple.com/article.html?artnum=305743
    -Jason

Maybe you are looking for