PSEMAgent did not load any information into the hub for Webshpere 6.1 ND

Hi all,
using
Oracle 10 R2 10.2.0.3
Webshpere 6.1 Network Deployment
Peoplesoft HRMS and Campus Solution 9.0
i run the two commands startagent.bat recrawl and startagent.bat, the agent started sending pulses "sending pulse from com.peoplesoft.emf.peer:id=1".
but when i entered the hubURL into browser, there was no registered host (at that time both PSEMagent and Change Assistant were running)
Note: webserver is using port 80
someone please guide me how to deal it using websphere

What is your OS ? Does the server run on the same box ?
Did you configure the files as well :
%PS_HOME%\PSEMViewer\envmetadata\config
%PS_HOME%\PSEMAgent\envmetadata\config
especially the parameters
hubURL
agentport
windowsdrivestocrawl
And also the file in your webserver directory path :
%PS_HOME%\webserv\peoplesoft\applications\peoplesoft\PSEMHUB\envmetadata\config
(the folder in italic may differ on your side).
Please, if you can, paste here the files content.
Nicolas.

Similar Messages

I have photoshop 13 and it will not load any pictures into the organizer. How do I fix this error.

I keep getting the error that nothing was imported due to files or folders selected to import did not contain any supported file types or the files are already in this catalog. It started two days ago ( I have had elements 13 for about 6 weeks now) after I put my photo card in to download as usual. I have used photoshop elements for years and know what I'm doing. I also have Photoshop 12 that works just fine and will download these same files with no issues. I am using hp laptop and windows 8.1. Please help. I have thought about uninstalling and re installing but I have a lot of effects that have been added already and it is time consuming to do it again.Thank you for any advice

This is often a feature of faulty battery. Try to Restore your iPhone with iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send your iPhone to Apple for resolution under Warranty.

HT1329 My hard drive crashed. Is there any way to get my songs onto my new computer without re-loading all of the CDs. I did not make any purchases through the itunes store. Have never used icloud. The songs are on my ipod.

My hard drive crashed. Is there any way to get my songs onto my new computer without re-loading all of the CDs. I did not make any purchases through the itunes store. Have never used icloud. The songs are on my ipod.

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

SQL 2012 - SSIS Error -The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.

Hi guys
Trying to run this package on SQL 2012 agent and getting below error . No more details I could find so far.
The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
About Package - Its connecting to different version (2000,2005,2008,2008R2,2012) servers and putting Jobs information into one Database table.
Any workaround or fix ?
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

New package or one that used to work? Connecting how? How does it poll?
On the surface it is an error from a memory space of the binary/non-managed code, so nothing can be really concluded based on what you decided to share with us.
Arthur My Blog
So Same package is working fine from my local machine which has SQL 2008 R2 and SQL 2012 installed. I am trying to push the package on server which has sql server 2012 Installed .
I don't see any error .
I ran package manually from server using SQL Data tools and ran successfully...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

I'm not receiving any mail into the Junk Mailbox

Hi
I had a problem with the ports of the 2 accounts that I have set up in Mail (one of those is mac.com) due to an excess of space used. I tried several options and it finally it worked. As a result, a week later I realised that I was not receiving any mail into the Junk Mailbox... I don't know if it is related to the orher problem, maybe not.
Essentially I am no longer receiving any junk mail at all - and no mail that is even doubtful (ie from an unknown address). The mails are not showing up even online via MobileMe ... so I have no idea where they are!
Any help would be much appreciated. Thanks.

Yes, I'm the author of the form and I expected the generic notification to be sent to that email but none is coming through. I also see that there is a place on the settings page to enter a custom notification email but that is grayed out unless I upgrade. I just want at least one, generic email to be sent to me so that I can know when a user submits a form.
Here's my screen shots:
http://peteraudenas.com/wp-content/uploads/2013/08/user-account-screen-shot-1.jpg
http://peteraudenas.com/wp-content/uploads/2013/08/user-account-screen-shot-2.jpg
Your Thoughts? Thanks!
Joe

I ordered an iphone 6 plus 64 gig space gray on 9/19/14. I still have not gotten any information on the ship date. Please help verizon!!!

I ordered an iphone 6 plus 64 gig space gray on 9/19/14. I still have not gotten any information on the ship date. Please help verizon!!!

urdea123,
You called and help has arrived. Congrats on the new phone. The iPhone 6 Plus 64GB space gray device is shipping on 11/7. You can always check your order here http://vz.to/1qKj0Rx
RobinD_VZW
Follow us on twitter @VZWSupport

TS1702 I have downloaded and attempted to purchas the app "ForeFlight HD" for the iPad 2, however, when I put my credit card information into the app for purchase, I am told to contact iTunes support to complete the transaction. Can you tell me how to fix

I have downloaded and attempted to purchas the app "ForeFlight HD" for the iPad 2, however, when I put my credit card information into the app for purchase, I am told to contact iTunes support to complete the transaction. Can you tell me how to fix this?

Contact iTunes Support:
http://www.apple.com/support/itunes/contact/

DAC not loading any data to the warehouse

When running the Projects - Oracle R1211 pre-built execution plan in DAC I hardly get any data loaded into the warehouse. I have DAC version 10.1.3.4.1 with patch 20100105.0812 installed and
Informatica 8.6.1 and Oracle Database 11g.
When I configured the DAC for the first time, I copied the wrong ojdbc files to the \DAC\bifoundation\dac\lib folder, as I took files that belong to the 10g database, that is ojdbc14*.files. I have now copied the ojdbc6*.files to that folder but still only getting following rows sucessfully passed in the DAC and the rest of the tasks pass zero rows:
SIL_DayDimension (11,531 rows Successfully Passed)
SIL_MonthDimension_UpdateFlag (373 rows Successfully Passed)
SDE_ORA_Flx_ListTmpLoad (6 rows Successfully Passed)
SDE_ORA_CodeDimension_Project_SecurityLevel (3 rows Successfully Passed)
Load into Position Dimension (1 rows Successfully Passed)
SIL_WorkTypeDimension_Unspecified (1 rows Successfully Passed)
SIL_Project_TaskDimensionHierarchy (1 rows Successfully Passed)
PLP_JobCategoryAggregate_Load (1 rows Successfully Passed)
SIL_PositionDimensionHierarchy (1 rows Successfully Passed)
PLP_EmployeeDimension_Update_ProjectManager_Flg (1 rows Successfully Passed)
SIL_TimeDimension_EnterprisePeriod_Unspecified (1 rows Successfully Passed)
SIL_TimeDimension_EnterpriseQuarter_Unspecified (1 rows Successfully Passed)
SIL_TimeDimension_EnterpriseWeek_Unspecified (1 rows Successfully Passed)
SIL_TimeDimension_EnterpriseYear_Unspecified (1 rows Successfully Passed)
SIL_TimeDimension_MCalDay_Unspecified (1 rows Successfully Passed)
SIL_TimeDimension_MCalPeriod_Unspecified (1 rows Successfully Passed)
SIL_TimeDimension_MCalQuarter_Unspecified (1 rows Successfully Passed)
SIL_TimeDimension_MCalWeek_Unspecified (1 rows Successfully Passed)
SIL_TimeDimension_MCalYear_Unspecified (1 rows Successfully Passed)
SIL_TimeDimension_UpdateEnterpriseAttributes (1 rows Successfully Passed)
I noticed I can't delete the ojdbc14*.files from the \DAC\bifoundation\dac\lib folder as it says it's already in use by another program. Could that be the problem, that is DAC is still trying to use the ojdbc files for the 10g version instead of the 11g and that's why it's not passing any data to the warehouse, or could the problem be from a totally different source?
Thanks in advance
Gosi

still facing the issue?

PsemAgent did not load complete environment information into the hub

Hi all,
i m using oracle 10g R2 10.2.0.3 and peoplesoft campus solution 9.0. i have two databases named UETPDEV and DUHSDEV. I run the command startagent.bat recrawl and then run getenvinfo.bat. when i check the viewer.xml it contains information about UETPDEV but not about DUHSDEV.
Note: viewer.xml contained info about the application, file, web and process schedler servers of both environment but information about the database is availbale for only UETPDEV and not for DUHSDEV
there is only single PS_HOME and i have installed peoplesoft CS application on both databases. The webserver (BEA Weblogic 9.2) for both applications are running on ports 80 and 83 respectively.
someone guide me please

One PSCA agent works on one and only one port.
The link from the agent to your database is based through the webserver port and from there through jolt port.
If your databases are on two webserver, you cannot find the two databases in one.
You have to work separately. Or in two time.
First configure PSCA to work on one port, then on the other port.
Nicolas.

The apple store on IPAD will not load any items in the purchased tab.

My daughter's IPAD lost all information on it last night. I had to restore the device today. Now, under PURCHASED nothing finishes loading. I can update via sync, but I can not find apps previously purchased on the device.
Anyone with any ideas as to 1) why the IPAD lost all data and required a restore and 2) why my purchased tab will not load (it has been "loading" for 30 minutes)
Thanks

Its a new day here in County Kerry Ireland and I would like to thank the guys who answered my query.
It was a case of misreadding the terminology . I was selecting the rear tray and not the manual feeder.
Complete stupidity on my part.
I've printed my first fine art print and hope it will be the first of many.
Great forum! Syra

I still have not recieved any information on the Kelby training that was supposed to be included.

When I talked to Narish via chat on November 29, I was told I should be receiving an email within a few days. It has been over a week.
This training was the only reason I purchased the photography bundle in November.
Can I get a Month credit?

Hi graphius,
We would like to inform you that we have checked the details for your account.
We have just sent the code to you in an email. Kindly check the case# in a [Private Message] for the same.
Thanks,
Atul Saini

HT4009 i emailed u back yesterday about a purchase that was put through my bank account that i did not make it was on the 6th for 99.99 for douybledown casino i did make a purchase that day but not for that amount it was for 39.99 nit 99.99 no reply back

I emailed u back yesteday about an issue that u took 99.99 dollarss out of my bamnk account that i did not do i either want my money put back into my account or the chips i was charged for amd i got no reply from anyoine all u have to do id contact doubledown and they will show that on the 6th no chips other than 12,000,000 were put into my account that day all i want is either my money abck or the chips put into my doubledown account and i got no reply back from anyone so will someone please lookj into this it was a mistake on ur part noone elses so will someone please do one thing or the other waiting impatiently thank u

Welcome to the user to User Technical Support Forum provided by Apple.
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How to block the " you are lucky visitor" popup each time I open the Firefox. I can not find any information in the add on lists et al. Thanks!

Recently, my Firefox browser v25.0 is experiencing a popup problem. A popup message saying "... you are today's luck visotor, please click Ok to ontinue". I have to click Ok then I can continue to use the browser. Is this a popular problem? Please advise how to block this popup. Thanks!

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Installed Firefox 3.6.6 and I could not load any webpages even the home page

When I opened Firefox and went to the error console I was getting a bunch of messages. This is one of the messages.
Error: Permission denied for (document.domain has not been set) to call method Location.toString on (document.domain=).
If I could please get assistance with stopping these messages I would appreciate it.
== This happened ==
Not sure how often
== After I closed and reopened Firefox after installing 3.6.6 update

Well, this is kinda a generic solution of yours, cor-el. As I expected, disabling addons and entering safe mode doesn't solve the problem.
This is a more or less wild guess: it seems the problem is with the couple '''newest Firefox + newest Flash update'''. I don't know who causes the problem, but the searches I made seems to also refer to Flash. As I have updated both recently, I cannot isolate one or another right now.
In some web page, it seems that all of those who provide Flash content should make a change to their crossdomain.xml files. As I'm just the client, I don't see a workaround right now.
My workaround right now: installed '''IE View Lite''' extension, and open these pages in Internet Explorer or whatever browser might work as expected.
Will be more than happy if there's any available workaround for Firefox itself.
When will those flash content pages finally reach the HTML5 nirvana? :-(

New SP Custom List results in Power Query Error: Expression.Error: The key did not match any rows in the table.

Hi,
I'm running into something that seems to be a bug in Power Query. I've got my Power Query tables from SharePoint lists into Excel and Power Pivot data model. (Making sure the SharePoint site is in English and I replace MMD columns with normal columns).
But then, when I close down Excel, add another custom list to SharePoint, open the Excel workbook and want to add that new custom list using the same connection (via recent data sources).
It shows the newly added custom list in the explorer but with an error:
Nothing I can do to fix this; restarting Excel or PC; nothing.
The only way I got around this was by removing all my existing data sources and re-create them..
after that, the same SharePoint custom list WAS read with Power Query without an issue.
Thanks,
Jeroen

Its because of recent updates to Power Query.
In recent updates internally their is some change in syntax for reading particular table from list (I faced this issue while reading data from Excel file, i.e After applying recent update of Power Query my Queries which were working fine before starting
throwing same error that yo are facing).
As solution their is small tweak to be done in existing queries, instead of recreating all queries. If you can provide me your complete old query from Advanced editor then I can point to tweak that need to be done.
Thanks,
Sagar K

PSEMAgent did not load any information into the hub for Webshpere 6.1 ND

Similar Messages

Maybe you are looking for