PSI - Budget Field is not getting after running Process Update Summary Bal

Hi,
I have a project with Budget being created through Financial Plan types. After Baselining the budget and performing Actual Transactions, i run Process 'PRC: Update Project Summary Amounts for a Single Project' and 'PRC: Update Project Summary Amounts'. System updates Project Status Inquiry - PSI with Actual Transactions but Budget field is getting updated and it keeps on showing as Zero Budget.
Whereas when i create project with Budget Entry Method and not through Financial Plan Types, PSI is correctly updated after running these processes. Is PSI budget field intended for Budget Entry from Application Based Forms Only or there is something else i need to do get the PSI Bidger field updated.
Thoughts on this would be highly appreciable.
Zeeshan

Hi Dina
Thanks for your reply, please confirm what i have to do in order to populate the data to PSI from Financial Plan.
Zeeshan

Similar Messages

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Macbook will not boot up after running Software Update

My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
I cannot get an appointment at my Apple Store before Monday.
Any suggestions?

Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white, goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

User defined fields does not get added into database

Hello Experts
                          User defined fields does not get added into database , when i click add button it
shows data added sucessfully , but when i check data base no entry is made , only entry is made for
B1 fields , like DocEntry ,DocNum etc.., no entry is made for U_fields..
I have check every thing databound is also set to true
Actually first few 6 data was added properly but now its not geeting added for user fields
I have used 2 document row child table for 2 matrix and for remaining Document table
What might be the problem
reply soon
plz suggest

Hello sir
I have checked Default form , in that entry is made into database
but running the form in screen painter in preview mode or through coding it does not get added for user field
this id my binding code
LoadFromXML("updateopd.srf")
            oForm = SBO_Application.Forms.Item("updopd")
            oForm.DataBrowser.BrowseBy = "txtpatid"
            'Adding combo in Obervation
            oItem = oForm.Items.Item("txtpatid")
            oEdit2 = oItem.Specific()
            oEdit2.DataBind.SetBound(True, "@UPDATE", "U_PID")
            oItem = oForm.Items.Item("txtmnane")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_FName")
            oItem = oForm.Items.Item("txtlname")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_LName")
Plz suggest

Macbook will not boot up after running Software Update (Couldn't fix it)

Hi there,
I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
CSRHIDTTransitionDriver::probe: -s
CSRHIDTTransitionDriver::probe: booting in single user .. do not match
Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
3) When trying to boot in safe mode. I got a grey screen with the following message:
'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
I don't know what to do any more.
A) Can I resuscitate my old system? If yes how?
B) If not, can I at least save the data I have in my old HD?
C) Is it possible to format and reinstall the OS or is this this computer doomed?
Apologies for writing so many questions but I'm really freaking out!
Thank you.
B.

Hi BDAqua,
I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
1) "Cloning method: Backup everything
Delete items on target that aren't on the source: No
18:23:39 Enabling ownership on the target volume...
18:23:50 The target volume has ownership enabled.
18:23:50 The target volume has Access Control Lists enabled.
18:23:50 Authenticating...
18:23:50 Initiating synchronization engine...
18:23:51 Cloning...
18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
19:50:14 Sync Engine warnings: (
"rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
"rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
2) "Mac OS X Version 10.4.11 (Build 8S2167)
2009-03-01 10:30:14 +0100
2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Starting the process...
2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of

if you can help me please alguin
Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of Adobe Creative but nothing help

Without proper system info and otehr technical details nobody can tell you anything.
Mylenium

Data carrier & application field are not getting displayed in CV04N

Hi Guru's
In TCode : CV04N, data carrier & application field are not getting displayed.
While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
Let me know is there any configuration that has been missed out.
Regards
Bhanu

Hi Bhanu,
Please note that the fields 'Data carrier' & 'Application field' are visible only if no document type is entered.
Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
Regards,
Pradeepkumar Haragoldavar

PR Release Strategy tab processor field is not getting displayed

Hi Experts,
While creating Purchase Requisition, In the Release Strategy tab processor field is not getting displayed which should be showing the name of the user id which has been configured in the SPRO.
SPRO--> Rel Proc for PR > Rel Group> Rel Code--> Object type (US) and --> Agent (User id who has to approve the PR).
release strategy - Release code -work flow 1
That processer name is not displaying
Thanks
chandoo

This is the workflow forum.

Date and time fields are not getting updated in database

Hi,
I am Using the bapi SD_SHIPMENT_HEADER_CHANGE in my program ...
I am using bapi_shipemnt_create for creating shipment document but, trying to enter the date fileds using this bapi .
can anybody please tell me how shud i pass this variables exactly ...
i tried giving test data and checked this bapi .. the result in changing parameters is also appearing but in databade itself the date fields are not getting reflected ...
The fields ate DTDIS ,UZDIS, DATEN,UATEN. ( i am trying to map these fields in changing parameters)
          gw_vttkvb_new-mandt = sy-mandt.
          gw_vttkvb_new-tknum = gw_return-message_v1(passing shipment number )
          gw_vttkvb_new-dtdis = gi_ship_doc-dtdis.
          gw_vttkvb_new-daten = gi_ship_doc-daten.
          gw_vttkvb_new-uzdis = gi_ship_doc-uzdis.
          gw_vttkvb_new-uaten = gi_ship_doc-uaten.
          APPEND gw_vttkvb_new TO gi_vttkvb_new.
          CALL FUNCTION 'SD_SHIPMENT_HEADER_CHANGE'
          EXPORTING
            i_tvtk                             = '
          I_DESTINATION                      =
          I_DEPARTURE                        =
          OPT_DIALOG                         = 'X'
        IMPORTING
          E_SERV_AGENT_FROM_DELIVERY         =
          E_ROUTE_FROM_DELIVERY              =
          E_LEG_DETERMINATION_DONE           =
          E_NUMBER_OF_CHANGED_LEGS           =
             TABLES
               c_xvttk                            = gi_xvttk
               c_yvttk                            = gi_yvttk
               c_xvttp                            = gi_xvttp
               c_yvttp                            = gi_yvttp
               c_xvtts                            = gi_xvtts
               c_yvtts                            = gi_yvtts
               c_xvtsp                            = gi_xvtsp
               c_yvtsp                            = gi_yvtsp
               c_xvbpa                            = gi_xvbpa
               c_yvbpa                            = gi_yvbpa
               c_xvbadr                           = gi_xvbadr
               c_yvbadr                           = gi_yvbadr
               i_xtrlk                            = gi_vtrlk
               i_xtrlp                            = gi_vtrlp
          I_DEPARTURE_SEQUENCE               =
          I_XVTFA                            =
          I_YVTFA                            =
             CHANGING
               c_xvttk_new                        = gi_vttkvb_new
            EXCEPTIONS
              invalid_change                     = 1
              route_insert_failed                = 2
              tdlnr_insert_failed                = 3
              status_planned_failed              = 4
              status_registrated_failed          = 5
              status_loading_start_failed        = 6
              status_loading_end_failed          = 7
              status_completion_failed           = 8
              status_shipment_start_failed       = 9
              status_shipment_end_failed         = 10
              OTHERS                             = 11.
          IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ELSE.
             **** Save shipment created
           CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         WAIT          =
              IMPORTING
                return        = gw_return.
          ENDIF.
Regards,
shilpa talluri .

Hi,
Try this
DATA: wa TYPE zvariant.
wa-mandt     = sy-mandt.
wa-z_var     = 'test'.
wa-projid      = 'test'.
wa-relid        = 'test'.
wa-srtf2       = 'test'.
wa-clustr      = 'test'.
wa-clustd     = ''test'.
INSERT zvariant CLIENT SPECIFIED FROM wa.
Raul Natu

Assignment field is not getting populated in KSB1 for posting key 50

Hi All,
We are uploading entries thru excel in SAP.
For posting key 50 assignment field is not getting populated in KSB1.
But for posting key 40 it is getting populated correctly.
All setting (FSG, posting key details) are same for both the keys.
No substitution defined in SAP.
There is no issue for FBL3N for both the posting keys, only issue with KSB1.
Any idea what could be the reason for this?
Thank you.
Akash

KSB1 is CCtr report..
if it is revenue normally it will be treated as statistical posting in CCtr accounting- for the cost element when it is defined as revenue element.. - check Cost elements - whether it is Cost and cost reducing or revenue element--
possibility this can be one of the reason.
check and confirm

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app
- Restore from backup
- Restore to factory daults/new iPod.

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

The graph dose not shown after running the Customize JSP Page.

Hi All,
While creating customize JSP I am facing one problem - The graph dose not shown after running the Customize JSP Page.
What are the possibilities ? any body has any Idea Please help me

Hi all,
I have the same issue! Any solution??
Thanks
BI Beans Diagnostics(v1.0.2.0) 11/10/06
=========================================================
JDEV_ORACLE_HOME .......................... = D:\jdev1012b1913
JAVA_HOME ................................. = D:\ORDB10gR2Home\jdk
JDeveloper version ........................ = 10.1.2.1.0.1913
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.67.0
BI Beans internal version ................. = 3.2.2.0.24.2
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.4.2
JDBC JAR file location .................... = D:\jdev1012b1913\jdbc\lib
Database version .......................... = 10.2.0.2.0
OLAP Catalog version ...................... = 10.2.0.2.0
OLAP AW Engine version .................... = 10.2.0.2.0
OLAP API Server version ................... = 10.2.0.2.0
BI Beans Catalog version .................. = 3.2.2.0.24
OLAP API JAR file version ................. = "10.1.0.5.0"
OLAP API JAR file location ................ = D:\jdev1012b1913\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 1
Number of metadata measures ............... = 23
Number of metadata dimensions ............. = 8

Component is not getting displayed in process scheduler menu

Hi All,
I have created a project and created/registered a component in that project. I have also added a page which is having a record definition with a record named L_RUNCNTL having two search fields, to this component and configured L_RUNCNTL as search record for this component.
I have registered this component with below details:
Menu Name : PROCESS_SCHEDULER
Bar Name : PROCESS
Folder Name as PT_PROCESS_SCHEDULER
Select “Always Use default local node?” Check box
Permission List : PTPT1000
But after registration, when I open process scheduler menu I dont see this component listed. However, previously I created a component in this project and registered it with same details given above and I could see it in process scheduler menu.
I am surprised why another component registered with same details is not getting displayed in process scheduler menu.

Thanks Michel,
I got this problem resolved. Here is what I did:
Ran portal security sync at the navigation PeopleTools > Portal > Portal Security Sync.
Cleared browser cache, accessed the page again and saw the link was available.

PSI - Budget Field is not getting after running Process Update Summary Bal

Similar Messages

Maybe you are looking for