PSI CALL - Project Update from PSI Cancelled 50%

Hi :
I created a psi call to update to update assignment actual work for project server 2007. It had been running fine for the last few years. I have a project if I looked at the back end data for this project the assignment actual work cost
had been updated by PSI. But it does not show in project server client or pwa.
If I tried to run the project manually I got a queue PSI ( status cancelled at 50%). I tried to restore the project from a previous version and republished it to project server. I am still having the same issue.
Any idea what I can try? This is the only project we are having issue with.
Thanks,
kkmick

Hi,
Are there any resources assigned to the summary tasks? I remember having some issues with these assignments
Paul

Similar Messages

Deadline date preventing project update from PWA interface

We have the following error when trying to update a project PDP through PWA. "An error has occurred when saving your project to the server. Please contact your administrator for assistance."
We have identified in the project schedule one task that is the origine of the problem. In this task, there is a deadline date. If we remove the deadline date, we can update the project from PWA without any problem.
The task has a deadline date and is completed at a 100%.
If someone has an explanation for this, I will be happy to hear it.
Mermoz

We are using project server 2010. We have SP2 installed. I don't know CU last applied.
We have this issue with one project. I can't reproduce the problem with another project.
If a remove the Deadline Date and publish, then, PWA update works fine.
If I add back the Deadline Date and publish, then, we get the same error message.
Next, I will try to add back a different "Deadline date" and will report the result.
Mermoz

Ipod incorrect update from itunes

I recently connected my 30GB Ipod Video to my laptop running Windows XP Pro. Once connected itunes said it needed an update once updated it doesn't work now. On the screen of the ipod whilst disconnecte4d it says to connect to itunes and reformat it. Also trying to access it through My computer when its in disk mode or normal mode it says it isn't formatted and asks if i want to e format it. I don't want to format it because there are files on iot that i would like to retrieve, is there anyway of retrieving these files? Also has anyone else had this problem?

One major thing i forgot to mention was that itunes didn't recognise my ipod as a 5th gen and updated it for another ipod, thats why this topic was called incorrect update from itunes.

I have big problem i make update to my software iso 7.12 in my iphone 4 but when i recive calling and i want to cancel and recall again i phone is stop no working and i must restart it to work what can i do

modem firmware 04.12.09
iPhone 4
memory is 32 g
iso 7.1.2(11d257)
when cancel call it not work before is shutdown and open it again
i have big problem i make update to my software iso 7.12 in my iphone 4 but when i recive calling and i want to cancel and recall again i phone is stop no working and i must restart it to work what can i do

Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

HT202853 I have many project made in move HD that are not updating to the new iMovie 10 on my new iMac. Why is this not working as stated? How do I get my projects back from backup after old iMac crashed?

I have many projects made in imovie HD that are not updating to iMovie 10 on my new iMac. Why is this not working as stated on the article HT202853? How do I get my projects back from backup after old iMac crashed?

According to:
Update projects and events from previous versions of iMovie in iMovie (2014) - Apple Support
you can update from iMovie versions 7, 8 and 9, but iMovie HD is iMovie 6.
Maybe you can update in two steps, first from iMovie 6 to iMovie 7, 8 or 9 then to iMovie 10.
Geoff.

How a variable in C++ gets updated from calling a labview dll running in a loop?

Hi,
I have created a dll which is called from a C++ program. The dll has been created from a vi which continuously runs in a loop (this is necessary because I need to control some hardware in real-time). When I call the function from C++ I can see the front panel of the vi working properly, i.e. all variables are updated in real time on the labview panel (which I will set as not visible once i get this problem sorted out).
However, I can't get the variables' values getting updated in my C++ program and I need these values to change in which way the hardware should behave ... is there any example somewhere in which something similar has been done? I have seen some examples where a dll is called from C++ with a vi function but not running in a loop. In these examples, the vi function passes the datum to the C++ software once is finished ...
thanks very much for your help,
kind regards
Sergio

Hi smercurio_fc!
Thanks very much for your answer!
I have already an inter-process communication, where there are two threads running in parallel. In one thread the C++ code is running while in the other the LabVIEW code is running. The labview function is passing the "output" variables as pointers too.
_1DScan(ReqForce,&StopAlign,0,&ReadForce,&Piezo_running,&RS232OK,&Running);
the function is called using the following:
void CFMControl::FMThreadProc()
_1DScan(ReqForce,&StopAlign,0,&ReadForce,&Piezo_running,&RS232OK,&Running);
return;
When I run the C++ code I can see both threads working by seeing data being updated in C++ front panel (data that belongs to C++) and in labview fron panel (data that belongs to labview). However, when I try to use any of the outputs coming from labview I can't get them updated....

Calling Batch input from Web Dynpro - any alternatives for table updates?

Hi!
I am asked to create a screen in Web Dynpro for the GJ30 transaction (JV Cutback mapping of WBS' elements). I created a remote enabled function module which call batch input for GJ30 . Testing the Function modules direclty goes fine, but not calling the function module from WD. then I get the same error message as when I once tried to call SAP GUI from Web Dynpro ( Call transaction /submit program).
My next step is to try to create a batch input session (instead of call transaction) and run it using rsbdcsub, and then check the result of the run. But maybe this will fail of the same reason as well, and I suppose this will make the user waiting longer for the response .
I read somewhere that Web Dynpro does not support batch Input. But what can you do when there are no standard BAPI's for the update you want to do in SAP ? We are not supposed to do direct table updates.
Anyone who have struggled with the same issues and found a solution??
regards, Tine

Hi,
as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
Thanks,
Chandra

What is the best way to cancel the related update from aboutToUpdate ?

What is the best way to cancel the related update from DescriptorEventAdapter.aboutToUpdate ?
Anyway to manipulate descriptorEvent.getQuery() so that it doesn't generate anything?
In our specific case, TopLink 11 - EclipseLink 2.0.2 generates useless update, so we want to silence them to avoid DB round trip.

Mustafa,
Thats the way to kill the Job, But We are not Authorized for SM50.
At present we will raise a request to the Basis to do that. Speaking from user point of view is there any better way to handle it.
Tony

Project Revenue Plan Not Update from Sales Order Item

I am generating a network and project from the sales order item using Assembly processing. I am using milestone billing on the sales order item and the milestones attached to the project network activities are appearing as billing blocks on the sales order item billing plan. However, the project revenue is not getting updated from the sales order billing plan. Can someone please help?
I have deleted the billing plan on the billing WBS element and activated revenue planning update from sales order in cusomization for PS. I am looking at CNS41 under the project revenue sched in version 0. Is there a different report I should be looking at?
Regards,
Venkat.

HI Venkat,
You are looking at the correct report & I believe you have also done the necessary customization. If you create a sales order and reference it to a quotation, the related plan values in the WBS element are refreshed automatically.
When the payment data is recorded, the terms of payment and the customer payment history are taken into consideration. One of the probable causes could be the credit limit of the customer might have been exceeded. Take help of your SD consultant & increase the credit limit for that customer (from the sales document), t-code FD32 if it is permitted in the business.
After the new credit limit is set execute the following steps:
u2022     Go to the t-code Change billing request (VA02)
u2022     Open the required billing request
u2022     Remove the account assignment of WBS element from each line item
u2022     Save the billing request
u2022     Reopen the billing request in change mode
u2022     Reassign the WBS elements to all line items
u2022     Now the changed credit limit will take affect
u2022     Check the Planned Revenue for the said project in CNS41, it should get updated.
Rgds
Deepak

Calling ant script from another's project ant script

Hello there,
I would like to ask something about ant script. Sorry if this is not the right forum but I could not find a better one.
I have 2 projects ProjectA and ProjectB in 2 different direcory structures, that contain 2 different build.xml files. I am trying to call ant of ProjectA inside the build.xml file of ProjectB like the following:
         
        <target name="buildProjectA">
            <ant antfile="${ProjectA.root}/build.xml" dir="${ProjectA.root}" inheritAll="false"/>
        </target>Unfortunately I get a different output than calling ant for Project A from the command prompt. Shouldn't this call to ant for ProjectA from ProjectB be exactly the same as calling ant from the command Prompt

thanks for your reply,
the problem is not that it does not file the xml file (although you re right, I changed it) but that later on in the building it behaves differently
So, basically, what I want to know, is this the right way I am doing it or the two approaches are different cause in my approach ant is not called from the project's directory but from another ant script?

I am attempting to update from iMovie 9 to iMovie 10. I have many movies with iMovie 9. Yet, on iMovie 10, when I press "update projects and events", it states "iMovie could not find any projects or events to update". What do I do?

I am attempting to update from iMovie 9 to iMovie 10. I have many movies with iMovie 9. Yet, on iMovie 10, when I press "update projects and events", it states "iMovie could not find any projects or events to update". Somehow it doesnt' see all the movies I have on iMovie 9 library. What do I do?

I'm dealing with this same issue. At one point, it did recognize the Update function but then said it could not import the cache.mov and plist files which apparently means that imovie 10 can't see any of these past events. I can't figure it out.

Updating project document from file.

Hi community,
I need to create a functionality using C# to update opened Project Professional 2013 Document.
I have an open document with some project.
At some moment the project file was changed by third party program.
Those changes need to be displayed in the opened document. How can I update Active Project document programmatically to see changes made to the project file?
Thank you,
Ross

For this purposes I can use function OpenFile.
Doing that action there is a dialog window "Import wizzard" appears with several options - how to import. Could you please tell me how can I
suppress "Import wizzard" and
import updated project with "A new project" option (from wizzard).
Thank you.

Should I be concerned with losing existing data (projects or events) when updating from FCPX to FCPX 10.1?)

I purchased a Macbook Pro loaded with FCPX from a private party. I now want to update from FCPX to FCPX 10.1 should I be concered about losing my exhisting projects and events? The previous version of FCPX is registered to another person and wondered if this could potentially overwrite anything. I backed everything up to another drive but, just wondered if anyone has done this sucessfully?

The project files are put where FCP X wants to put them. If you render anything, it puts the rendering where it wants to put it.
FCP X has three opportunities to lose something - it can't find your project, it can't find the event, the event can't find the media. We see it on this forum all the time and right now 10.1 is managing all that and screwing it up for some people. We see FCP X updating events and projects...
With Motion 5, I put my project file where I want - in a folder for that project. In that same folder, I have all my media. It's not necessary to have a feature where it moves my files for me to another drive, etc. I simply drag that folder anywhere I want and all the links are in tact because the links are relative.
With FCP X, even if I don't copy the media to the events folder and leave it where I want, it still creates a folder with its own hierarchy - Backups, Old Versions, Original Media, Render Files, Transcoded Media...
FCP X's method opens people up to more problems, obviously. You don't see people on the Motion forum talking about how Motion moved media or put it in the trash etc. The only thing that can happen is the small XML project file can't find the media and so you simply relink and you can use Spotlight for that.
Seems like there are more headaches with FCP X's method.

How to call a process from another project

Hi;
How to calling a process from another process in another project? Which activity that i need or web service, direct binding? I use 11g

Hi Tulasi ;
I have wsdl of the process i need to call. Also wsdl address on the server. But CALL activity can't use to service call. CALL activity can use only to reusable process call.
I think, this operation must make on composite.xml. But I have a same problem with this method and it don't work.
I create a base process that looking at below. It's include a direct binding. Is it include a direct binding?
[Base Process|http://d1201.hizliresim.com/t/s/21wqu.png]
Then i create a process that call to base process:
[Caller Process|http://d1201.hizliresim.com/t/s/21wqx.png]
I paste to base process' wsdl address on the server. Then i select port type (BaseProcessPortType) and a warning has occured that you see the picture above. Base Process contain Oracle SOA Composite Type. What's the wrong? It happened for Callback Port Type.
And second question is what's the Address? (under Reference Binding Setails option).
I think, i create the this direct binding correctly, i call to base process into my caller process via service activities.

After Alcatel OS update from v1.0.1 to v1.1.0.0, the phone doesn`t show phonebook names for incoming/missing calls!

Hi! I have very unpleasant problem with my phones after legal OS update! After Alcatel OT Fire OS update from v1.0.1 to v1.1.0.0, the phone stops to show contacts names and pics for incoming calls and names for missing calls from phonebook. Before update, everything worked just fine! People from Telenor Serbia obviously hadn`t solution for this problem. They send me a request to send them a phones (yes two phones with same problem), but I got a phones back with unsolved problem! Also in the datas about phone, OS, e.t.c, the phone number doesn`t exist any more, just blank field. If means something, the phones are with different hardware revisions, 11 and 12! Any solution for this problem?! Thanks!

Hello,
After reading the information provided about your issue I suggest a soft reset of the phone.
#Take the back cover of the phone off.
#Take the battery out.
#Take the SIM card and microSD card out (if applicable).
#Wait 10 seconds.
#Put the SIM card and microSD card back in (if applicable).
#Put the battery back in.
#Put the back cover back on.
#Turn the device on.
#Check if the issue you were having is still present.
Please report back to us if this solved your problem!
Thank you

PSI CALL - Project Update from PSI Cancelled 50%

Similar Messages

Maybe you are looking for