.psp and .pspimage files

I thought I upgraded to Adobe PSP and now I cannot open ALL my files which are mostly .psp and .pspimage files... I wasted my $ if I cannot open my image files - any assistance will be appreciated

Diane,
I had to look up TUB (or Tube) files, as I had never heard of them, and have never used Corel PaintShop Pro. Here is what I found: http://graphicssoft.about.com/od/glossary/f/picturetubes.htm
I have also never used PSP files, as my main Image-editing program has been Adobe Photoshop (a totally different program from Corel PaintShop Pro). This is just a guess on my part, but it is based on years of helping users get non-supported Image files into Adobe Photoshop. There is a free Image-editing and cataloging program IrfanView, that works with a wider range of file formats: http://www.irfanview.com/ This is an amazing little program, in that it's first free, but also that it handles so very many formats well. It also will allow the user to Open one of the odd Image files, but will then let them Save it into many other formats, such as the more common TIFF, or JPEG, or even to Photoshop's native PSD. Unlike many Image-editors (other than a flavor of Photoshop), it can Open PSD files, as well.
When a user gets a file, that is corrupt (fairly common in JPEG format), I usually recommend IrfanView, as it will Open some pretty badly damaged JPEG files (the file's header are usually mangled, or very poorly written), and can then Save them into a format, correctly, that other programs will then open.
I would give IrfanView a trial. Now, I am not sure just which of the Corel PaintShop Pro files, it can deal with, but I know that it handles many other proprietary Corel files, like Corel Draw's CDR files. I would guess, based on my reading of that article on TUB/TUBE files, that ONLY Corel's PaintShop Pro, and Corel Painter will work with them, due to their nature, and the fact that they work with the TUBE Tool (sounds a lot like Painter's old Image Hose Tool), so IrfanView will likely not be helpful with those - but the PSP files should Open in it fine.
Please let us know if IrfanView is working for your PSP files, and to help with my education, whether the TUB files will work too.
Thank you, and good luck,
Hunt

Similar Messages

.psp and .tub files(paint shop pro)

I was using cs2 and had no problems opening .psp and .tub files. Now I have cs4 and can't open these files. A message saying "could not complete your request this is the wrong kind of document". Can some one please help with this problem? thanks in advance.

Better advice might be obtained by deciding what application you want to
open these files in and then trotting along to that forum.

Unable to import mp3 and m4a files

I have mp3 and m4a files that I'm trying to import into iTunes (and then add to my iPad). When I try to add them, I see a very quick "Processing Album Artwork" and then nothing happens.
The files work on the PSP I'm getting them from, on VLC on the Mac, and on Google Music Beta. (In fact, Google Music automatically uploaded them from the iTunes library.)
Searching for advice found years-old threads on various Mac support sites suggesting that I repair the files using "MP3 Scan+Repair," but that utility didn't find anything wrong with the files. I tried rebuilding a few of the files anyway, but to no avail.
The files are not DRMed; they were originally ripped from CDs I own, mostly using iTunes. (This was done at least 2-3 years ago.)

My problem seems to have randomly resolved itself. I went and imported a couple of files on a new playlist, and they appeared with tags and everything. Then I tried importing the rest just by dragging the folder into "Music," and it appeared perfectly fine.
So, I don't think this was the issue since the tags worked fine today, but I'm good now!

Error while converting class file to exp and jca file

error while converting *.class file to *.exp and *.jca file
=====================================================================================================================
linux-y60u:/home/admin/java_card_kit-2_2_1/samples/src # converter -exportpath "/home/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/HelloWorld 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/HelloWorld.class
parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/Identity.class
error: com.sun.javacard.samples.HelloWorld.HelloWorld: unsupported class file format of version 50.0.
error: com.sun.javacard.samples.HelloWorld.Identity: unsupported class file format of version 50.0.
conversion completed with 2 errors and 0 warnings.
=====================================================================================================================

i compile a file javacard use this command:
===
javac -source 1.3 -target 1.1 -g -classpath ./classes:../lib/api.jar:../lib/installer.jar src/com/sun/javacard/samples/Identity/Identity.java
===
and try to convert this class use this command
===
/home/xnuxerx/admin/java_card_kit-2_2_1/bin/converter -exportpath "/home/xnuxerx/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/Identity 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
===
result convert:
===
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
parsing /home/xnuxerx/admin/java_card_kit-2_2_1/samples/classes/com/sun/javacard/samples/Identity/Identity.class
converting com.sun.javacard.samples.Identity.Identity
error: export file framework.exp of package javacard.framework not found.
conversion completed with 1 errors and 0 warnings.
===
why ??
please your comment for this problem.
thank 4 all.

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

After installing Mt.Lion on my 27" iMac (2010), my copy/paste and move files would no longer function after a few minutes of use. I re-opened in Safe Mode and found everything okay, so I was told it was a bad extension. Now what do I do?

I have tried to look for an extension like Air Print Activator, which I tried and ignored. I thought it might have some timing method that would stop my copying and pasting and moving files after a minutes ot two. So I re-installed the latest version and "uninstalled" it, hoping it would then remove an errant extension. But that didn't help. It seemed to start when I first tried out Mail and moving new emails into their mailboxes after reading. I tried to figure out how to do a Clean Install, too, but it would not allow me to "move" the InstallESD.dmg to a USB disk, "resource busy". Everyway I turn, I'm blocked from carrying out a method of finding the culprit, short of starting from scratch -- but losing years and years of mail, files, receipts, etc. It's just too much to sacrifice. I have no idea what to do next, since I have no idea what extension is causing it or how to isolate and destroy it. Any suggestion would be much appreciated.

You can try repairing the boot drive, Since you are running OS 10.6.8 you will need the OS DVD. Do you have it?
Please post back if you do, and need directions on how to do the disk repair.

What is a Logical and Physical file path in sap?

what is a Logical and Physical file path in sap?

Hi,
Physical file is what you see from the OS level.
Logical file is what ABAP code can call certain functions to read/write.
Transaction FILE would link them together. Typically the logical path ends with "<FILENAME>", and the logical file refers to the logical path.
To extract the physical path from the logical path name
DATA: lf_mandt TYPE sy-mandt,
        lf_opsys TYPE sy-opsys.
lf_mandt = sy-mandt.
lf_opsys = sy-opsys.
To extract the physical path from the logical path name
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
      client           = lf_mandt
      logical_filename = p_unix
      operating_system = lf_opsys
    IMPORTING
      file_name        = gwa_input
    EXCEPTIONS
      file_not_found   = 1
      OTHERS           = 2.
IF sy-subrc EQ 0.
Concatenating the physical path and the input unix file name
    CONCATENATE gwa_input p_file INTO gf_file .
ENDIF.
Reward if helpful.
Regards,
Ramya

Logical and physical file paths

Hi,
can anyone elobrate me on what are logical and physical file
paths ?

hi,
Follow this link
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3deb358411d1829f0000e829fbfe/frameset.htm
File format determination (Required / optional fields and field checks).
Logical File Path configuration through transaction 'FILE'. A new physical file path should be created on operating system level or an existing one can be used if agreed. The Basis team member should create a new file path at operating system level, if required.
Hope this helps, Do reward.

How Can I Import Contacts from Excel (XLSX/XLS) and CSV file to VCF File?

Hi Friends,
I have stored my all official and personal contacts list in the Excel (XLSX/XLS) spreadsheet and CSV file from long time. But now, I want to move my all contacts in an MS outlook 2013 and also Samsung S4 Contacts directory. But for this process, I require to import all Excel and CSV file contacts into VCF file format. So that, I could export vCard (VCF) file in the outlook and Samsung S4 contacts book. But I don't know about this process that how to import Excel and CSV file contacts into vCard format. If anyone has best solution to import and export excel or CSV file contacts into VCF file, so please share with me that information.
Thanks & Best Regards
Jackson T.
<Edited By Host>

https://itunes.apple.com/gb/app/csv-to-vcard/id713295900?mt=12

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

Web Clipping portlet and pdf files

Hi,
I have created a web clipping portlet which just includes a set of links to HTML and pdf files. When I try to open a link to a pdf file the web clipping portlet fails, but links to the html content work fine
Is it possible using web clipping to open the links to the pdf files and display them in the web clipping portlet ?
Thanks,

Hi,
I have created a web clipping portlet which just includes a set of links to HTML and pdf files. When I try to open a link to a pdf file the web clipping portlet fails, but links to the html content work fine
Is it possible using web clipping to open the links to the pdf files and display them in the web clipping portlet ?
Thanks,

Setting up Brand New iPad 2 - iTunes Sharing and Getting Files from old iTunes Account

Greetings. I recently purchased an iPad 2 (convert after 20 years of PC use) and have been waiting to set it up until I knew the proper way to proceed. I have multiple questions and am hoping those of you with more Apple experience can help out a convert .
I would like to set it up with a new iTunes account so when my wife gets her iPad 2 next year we can share apps and movies we buy on iTunes. Do you always have to sync your iPad to your PC to get your latest purchases or can you do that via the wireless connection directly on the iPad after the initial set-up?
That said, if one of us buys an app/movie, will we both have to carry it on our iPads or will they store remotely on iTunes or on our PCs? I'm just concerned about maxing out the storage space on the iPad. Do the purchases need to occur on your PC vs. the iPad itself for both to have the app/movie access?
I've also read about iCloud issues and syncing all calendar/contact/etc. accounts if two iPads are set-up with the same Apple ID. What's the best way to initially configure the iPads so that you avoid this headache in the future?
Once I get all this settled and get a new iTunes shared account working, is there any way to get the movies I have in both of our old iTunes accounts into the new shared iTunes account? Can I simply drop them on a jump drive from one PC and place them into an appropriate folder on the new PC that the iPad sync's to if it does in fact need to sync?
Again, appreciate all the help and sorry for all of the confusion and multiple thoughts. I would just like to set this thing up once and for all the right way.
Thanks again

1, you can (re-)download a lot of purchases directly on the iPad without having to connect to your computer - apps and ibooks can be re-downloaded (as long as they remain available), music can be re-downloaded in some countries; tv shows can currently only be re-downloaded in the US. Re-downloading
2, films are a one-time only download, so you can either download it on your computer's iTunes and sync it to your device(s), or if you download it directly on the iPad you will need to then copy it to your computer's iTunes (connect the iPad and do File > Transfer Purchases) so that you can make a backup and copy it to your other iPods, iPads etc.
3, I haven't had any problems with iCloud, but then I don't share my account so it's only my account and contacts on my iPad and iPhone.
4, you can authorise your old accounts on your computer's iTunes (Store > Authorise This Computer) and copy the films onto it : File > Add File To Library - you can't copy or transfer content to a different account (nor can you combine accounts), they will remain tied to the original account
The iPad's manual has some info about syncing and each of the built-in apps (the iBooks app is covered in the manual though it isn't pre-installed, but you can download it for free from the store) - the manual can be downloaded from here http://support.apple.com/manuals/#ipad

Hyperlinks to XLS, DOC, and PDF files that are included in a .chm file work intermittently.

SUMMARY
Hyperlinks to XLS, DOC, and PDF files that are included in a
.chm file (and the Baggage Files) only work intermittently. The
only solution appears to be deleting the Temporary Internet Files.
PROBLEM
1. I place the XLS, DOC, or PDF file in the Windows
sub-directory that corresponds to the RoboHelp project sub-folder
where the topic in which I’ll place the hyperlink exists.
2. I open the help project in RoboHelp HTML.
3. I right-click on the project’s Baggage Files
sub-folder that corresponds to the Windows sub-directory in which I
placed the XLS, DOC, or PDF file (in step 1).
4. I import the XLS, DOC, or PDF file.
5. I open the topic in which I’m going to place the
hyperlink in the WYSIWYG editor.
6. I “drag and drop” the Baggage File into the
topic (in the WYSIWYG editor) to create a link to it.
7. I save the changes and then generate HTML (.chm) help.
8. I open the .chm file and click the hyperlink. The XLS,
DOC, or PDF file may or may not open.
9. When the hyperlink works correctly, for DOC and XLS files,
a “File Download – Security Warning” dialog box
appears asking, “Do you want to open or save this
file?”. The buttons that are available are
“Open”, “Save”, and “Cancel”.
These buttons work then as one would expect. (When the hyperlink
works correctly for a PDF file, it simply opens the PDF file in a
new window; there’s no prompt to save, open, or cancel.)
10. When a hyperlink does NOT work, for DOC, XLS, and PDF
files, no dialog box or other visual message is displayed. Instead,
the sound that is associated with the “Exclamation”
program event is played (the “Windows XP
Exclamation.wav” file is the WinXP default).
Other Notes:
- The hyperlinks ALWAYS work when I view a topic using the
“View Selected Item” function (Ctrl+W) in the RoboHelp
HTML project.
- Once a hyperlink stops working, it will not start working
again until I delete all the Temporary Internet Files.
- A hyperlink will stop working even if Internet Explorer
(iexplore.exe) is closed the entire time.
WORKAROUND
Through trial and error, I have discovered that if a
hyperlink stops working, I can get it to work again using the
following steps:
1. Leave the .chm file open.
2. Open Internet Explorer.
3. Click Tools>Internet Options….
4. From the “Internet Options” dialog box, select
the “General” tab.
5. Under the “Temporary Internet Files” section,
click the “Delete Files…” button.
6. From the “Delete Files” dialog box, select
“Delete all offline content” and then click
“OK”. The files are deleted and the “Delete
Files” dialog box closes.
7. Click “OK” to close the “Internet
Options” dialog box.
8. Without closing Internet Explorer and without re-starting
the .chm file, all the hyperlinks that didn’t work before
will now work.
GENERAL SYSTEM INFORMATION
- Windows XP Pro, SP2
- Internet Explorer 6.0.2900.2180
- RoboHelp X5, 5.0.2 Build 801
- HTML (.chm) help project files exist on my local machine
- HTML (.chm) help file is run from my local machine
- Project is under RoboSource version control
TEMPORARY INTERNET SETTINGS
- “Check for newer versions of stored pages” is
set to “Automatically”
- “Current location” for the Temporary Internet
files folder is set to “C:\Documents and Settings\My
Username\Local Settings\Temporary Internet Files\”
- “Amount of disk space to use” is set to
“594” MB
“View Files…”
- An XLS or DOC file will be listed here if I click its
hyperlink and then click either “Open” or
“Save” from the “File Download – Security
Warning” dialog box.
- A file will appear here even if I click “Save”
and then click “Cancel” from the subsequent “Save
As” dialog box.
- If I click “Cancel” from the “File
Download – Security Warning” dialog box, the file does
not appear in the Temporary Internet Files folder.
- When a file does appear in the Temporary Internet Files
folder, its Internet Address is displayed similar to the following:
“ms-its:C:\PrimaryProjectFolder\ProjectName.chm::/SubFolderName/FileName.xls”
“View Objects…”
Here’s a list of all the program files that appear:
- “Microsoft Office Template and Media Control”
(Last Accessed 12/13/06) (Version 12,0,6024,0)
- “Shockwave ActiveX Control” (Last Accessed
12/14/06) (Version 10,1,4,20)
- “Shockwave Flash Object” (Last Accessed
12/18/06) (Version 9,0,28,0)
- “Windows Genuine Advantage Validation Tool”
(Last Accessed 12/14/06) (Version 1,5,722,0)
- “WUWebControl Class” (Last Accessed 12/13/06)
(Version 5,8,0,2469)
Today is 12/18/06 so the only program file that is listed as
having been “Last Accessed” today is the
“Shockwave Flash Object”.
REQUEST FOR HELP
I really want to include certain PDF, DOC, and XLS files in
their native format in a .chm file. However, I need a better
solution to my problem than the one I discovered. What I really
want is to avoid the entire problem altogether.
Have anyone seen this before or have any suggestions?

You wont be able to do that. The embedded objects would appear as images only.

.psp and .pspimage files

Similar Messages

Maybe you are looking for