PSRF_REPORT_CREATE message only running when outdesttype is web

Our team has setup messaging to allow generated reports to be listed in the report manager by using the PSRF_REPORT_CREATE message and the PSRF_REPORTING_FOLDERS queue. When we run a new report with an outdesttype of Web, the message is passed to the queue properly and everything works well. The problem is, when we select any other outdesttype such as File, Email, etc. the message never gets sent to the queue and nothing happens other than the report being generated in the specified directory. We are pretty sure that our gateway, node, services, service operation and routings are setup properly since it is working correctly using Web. Anyone have any recommendations?
We are running peopletools 8.49

One thing i have noticed is when i do a select * from PSPRCSRQST the difference between the ones that get pushed to the report manager (the message gets sent) is that the PSRF_FOLDER_NAME = GENERAL where as the ones that don't fire the message this same field is empty. I am not sure if this has anything to do with it but that is the only difference between these records in this table.

Similar Messages

Is there any way to set a password so that txt messages only open when the password is entered

Is there any way to set a password so that txt messages only open when the password is entered?
Please help! Thanks for reading:)

Hello Damien,
There is an option to set a passcode for the entire iPhone. You can use the following steps to set this up:
You can configure a passcode for your iPhone, iPad, or iPod touch using Settings > General > Passcode Lock.
Once enabled, you will be prompted for the passcode whenever you:
Turn on or restart the device
Wake the device
Unlock the screen
Note: You can specify the amount of time the screen must be locked before requiring a passcode.
You can find the full article here:
iOS: Understanding passcodes
http://support.apple.com/kb/ht4113
Thank you for using Apple Support Communities.
Best,
Sheila M.

Battery or Charger? Only runs when plugged in.

The machine only works when plugged in. When unplugged, it turns off and the time/date settings are lost. I don't know whether, or not, this is a battery issue or charger issue. Can the answer be told from this data, which I got from the machine? Thank you.
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3175
Remaining Capacity (mAh): 0
Amperage (mA): 0
Voltage (mV): 10353
Cycle Count: 207
AC Charger Information:
AC Charger (Watts): 65
Connected: Yes
Charging: No

Adding to my previous post: Running coconutBattery 2.5.1, I find the following:
Current Battery Charge: -1mAh
Maximum Battery Charge: 3175 mAh
0%
Current Battery Capacity:
Current Battery Capacity: 3175 mAh
Original Battery Capacity: 4400 mAh
72%
Battery-Loadcycles: 207
Age of Mac: 24450 Months
Charger connected: Yes
Battery is charging: No

Creative Cloud will only "run" when started in "Run as Administrator"

For some reason, sometime in the past month Creative Cloud will not give me access when started from any of the normal methods; the Task bar Shortcut, the Start Menu shortcut, or even directly from double clicking on "Creative Cloud.exe." It starts in the background but does not appear on the monitor. This is confirmed with Task Manager. I have found that if I use Task Manager to "End Task," I can start the program (from any of the above methods) by choosing "Run as Administrator" and it appears on the monitor and I have complete access.
Today, I updated to the newest version and the situation remains the same (except, that before I did not have to "end Task" in Task Manager prior to "Run as Administrator.)
What is causing this and how do I fix it?

I tried every solution I found online suggesting deletion of apps, fresh installs, deletion of folders, permission changes, etc. I finally had an hour long chat session with an Adobe tech who had me do much of the same thing again, only to have the issue remain.
Here was the end solution which worked for me:
1. Create a new Admin account
2. Log out of your computer, and then back in under the new admin account
3. use the Creative Cloud uninstaller app to uninstall CC desktop. (Doing this prompted an alert message telling me I couldn't do this because some CC apps required it. So, I deleted the 2 CC apps I had installed, Lightroom and Photoshop)
4. After the uninstall completes, install a new copy of CC desktop. (Once I did this, it opened and ran correctly.)
5. Log out and log back in under your usual account.
6. If CC desktop doesn't start on its own, double click the application itself to start up.
After completing step #6, CC desktop started up on its own. I re-downloaded Photoshop and Lightroom through CC and all is working normally so far.

Messages only alert when received 1/4 of the time and do not appear in lock screen even though the ability to see them is turned on

I'm not notified at all 3/4 of the time that I have received a text message. How do I fix this?

Hey M0904,
I found the following information regarding troubleshooting notifications, I'd run through them and see if they resolve the issue:
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection. If you are not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app at least once to begin receiving notifications.
If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notifications to ensure that the app is configured for notifications.
If notifications do not appear only in the Notification Center, verify that the Notification Center setting for the app is enabled.
If you are still unable to receive notifications and you are using a Wi-Fi connection, verify that the network or firewall is not blocking access to port 5223.
Have a good one,
David

ITunes only runs when computer is in selective startup mode

I installed iTunes 9 and it works as long as my computer starts up in selective mode. I have to go into services and disable all non Microsoft services then restart the computer so iItunes works. When I start in normal startup mode I get the following message. "iTunes cannot run because some of its required files are missing. Please reinstall iTunes." Am I supposed to go through the timely process of restarting one item at a time and rebooting to figure out what's causing the problem or does someone have any idea what the problem could be?

Good lord. Good catch with that rebross. I wasn't thinking along those lines at all.
One way of speeding up the "narrowing in process". (1) Try starting with half the non-MS services disabled. (2) If itunes doesn't launch after doing that, atempt a selective startup with the other half disabled. If itunes launches after doing that, see if you can launch with the half that were enabled for (2) and half of the ones from (1) enabled, and so on.
(It's still a performance, but it'll be quicker than adding back the services one by one ...)

When I click on a message in my mailbox only he heading appears. The message only shows when I right lick and then click ' Open". What's going on?

When I click on a messge only the heading appears. I have to right click and then click 'Open" to see the message. What's going on?

Try Settings>General>Accessibility>Vision>Speak Selection>ON

My macbook only runs when plugged in to the wall power source.

The battery says it is at 99% charge but the computer shuts down when I unplug the power cord. Any suggestions?

Hi, John...nice to meet u! Same problem here! Try SMC reset, nothing....This is a Macbook 13" 2006 (yeah, yeah, time for a new one...I know...but kinda tight with my budget!!!), and have the latest OS X, Snow Leopard!!!
Here the Battery information
Battery Information:
Model Information:
Manufacturer:          DP
Device name:          ASMB016
Pack Lot Code:          0002
PCB Lot Code:          0000
Firmware Version:          0110
Hardware Revision:          0500
Cell Revision:          0200
Charge Information:
Charge remaining (mAh):          4500
Fully charged:          No
Charging:          Yes
Full charge capacity (mAh):          4528
Health Information:
Cycle count:          199
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          238
Voltage (mV):          12623
By the way, that's NOT the original battery! Bought this one online, Apple store, last year. Did some hardware tests, too. First, yesterday, I got some error message after the test: 4 SNS/1/40000000: 'VCOC'
Now, today, I've just repeated the hardware test and... it was clean, test was good, no problems.
Any idea?

Playbook won't run on battery. Only runs when connected to charger.

My playbook battery shows 100% charge, but immediately shuts off when I unplug the charger. When I plug it in it will boot up after red light comes on then flashing green fifteen times and work properly, until I disconnect the playbook charger. I also cannot connect it to my computer anymore.
Unable to find a solution to this exact problem. Any suggestions are appreciated.

First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
QUICKLY choose the Update option.
This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Creating a trigger to only run when a new table is being created

I know that I can use this to create DDL create trigger;
CREATE OR REPLACE TRIGGER
create_table_trigger
AFTER CREATE ON SCHEMA
DECLARE
BEGIN
END;Problem is this trigger would run on DDLs like 'Create sequence'; how can I only execute this for 'Create Table' DDLs?
Edited by: wonderboy87 on Jan 26, 2011 6:39 PM

Check ora_sysevent coupled with ora_dict_obj_type in your trigger. That will help you capture the CREATE TABLE event.
Edited by: Satish Kandi on Jan 27, 2011 9:55 AM

Only runs when plugged in

My MacBookPro disconnects when I remove the charger even when the battery is fully charged. I have apple care, but i have hard a difficult time locating support. Any suggestions?

I think you have to call this number;
1-800-263-3394
Before you do, try a PMU reset. Turn the computer off, remove the battery, remove the ac adapter and press the power button down and hold it for 10 seconds.
I that helps, see how it goes. Otherwise the number above.
Best of luck.

E17 desktop "engage" module only runs when i startx as root

I ran Syu yesterday and it updated a bunch of stuff, but it killed my e17 desktop. after reboot it told me that there was a serious error and that it unloaded all the modules, etc.
so i went to default settings and tried to set it back up, but when i Load the module engage, it crashes and resets to default.
when i start in console and login as root, everything works fine. same if i login as my user and sudo load start x.
everything else seems to be okay, but i dont know what happened to engage. im still not entirely familiar with changing permissions but for some reason thats always what i think the problem is. esp in this case since it works fine when im root

I am having similar problems.
I have a taskbar module installed in a shelf panel. Whenever I minimize an app, I can't restore the window.
In order to get the window back, I have to right click on the desktop and go the the windows submenu.
I tried reinstalling the complete E-17 package but that did not work.
P.S. Kudos to the E17 developers for giving me back my desktop after the Gnome3 debacle!

Is there a standard script that runs when a projector stops?

I know there are a couple of scripts I can use to set things up when starting a Director movie (startMovie and PrepareMovie). But are there also scripts I can use that run when the user chooses to shut down a projector? I want to run a script that sets the user's screen rez back to its original setting before shutting the projector down.
Thanks!
Dewey

Yes, I am looking at that one. But isn't that script activated each time a .dir movie is exited, even if it opens a different .dir movie? Or, is it only activated when the 'PROJECTOR stops?
The script I want to run should only run when you exit the projector.
Dewey

My acrobat pro will only run while the disc is in

Why does Acrobat Pro only run when the disc is in?

Hi johnheaney
Please provide more details around the issue to help you further.
-- What is the workflow?
-- Are you trying to install acrobat or launch it?
-- what is the version of acrobat that you're using?
-- What is the OS ?
~Mandy

Error when connecting to portal : Message: Dispatcher running but no server

 Hello everyone
 
I searched a lot on SDN for an answer to my problem but i couldn`t find any solution. Till yesterday the portal worked OK.. no errors untill this one, but from yesterday when i try to connect i received this error:

 
SAP WebAS Engine is starting...
 
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
 
Message: Dispatcher running but no server connected!
Details: No details available

 
I read all SAP Notes regarding this problem and i couldn`t find any solution which would fit for me.
From SAP Notes i found out that i need to analyse some logs .. here is what i found in the logs:

 

On stderr2 file:
[Thr 01] MtxInit: 30002 0 2 
The java class is not found: com.sap.engine.offline.OfflineToolStart 
The java class is not found: com.sap.engine.offline.OfflineToolStart

 <code>
On dev_jcontrol:
[Thr 01] Thu Jul 2 11:54:43 2009
[Thr 01] JStartupICreateProcess: fork process (pid 1863782)
[Thr 01] JControlICheckProcessList: process server0 started (PID:1863782)
 
[Thr 01] Thu Jul 2 11:55:08 2009
[Thr 01] JControlICheckProcessList: process server0 (pid:1863782) died (RUN-FLAG)
[Thr 01] JControlIResetProcess: reset process server0
[Thr 01] JControlIResetProcess: [server0] not running -> increase error count (4)
[Thr 01] JControlICheckProcessList: running flight recorder:
 /usr/java14_64/bin/java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar
com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector
../j2ee/cluster/bootstrap -node ID8477250 1246524883 -bz /usr/sap/BIP/SYS/global
</code>
 <code>
On dev_server0:
[Thr 39324]
[Thr 39324] * LOCATION CPIC (TCP/IP) on local host
[Thr 39324] * ERROR illegal parameter value ( function=SAP_CMTIMEOUT2 /
 parameter=conversation_ID / value=17508060 )
[Thr 39324] *
TIME Thu Jul 2 11:55:04 2009
[Thr 39324] * RELEASE 700
[Thr 39324] * COMPONENT CPIC (TCP/IP)
[Thr 39324] * VERSION 3
[Thr 39324] * RC 769
[Thr 39324] * MODULE r3cpic_mt.c
[Thr 39324] * LINE 7319
[Thr 39324] * COUNTER 2
[Thr 39324] *
[Thr 39324] *****************************************************************************
 
[Thr 39324] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 39324] ********************************************************************** 
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
********************************************************************** 
[Thr 39324] SigISetIgnoreAction : SIG_IGN for signal 20
[Thr 39324] JLaunchCloseProgram: good bye (exitcode = -11113)
</code>
 
I read the notes.. but for my problem it is written .. please contact SAP Support..Have any one .. any idea about this problem? It`s is importan because it is the future PRD portal.. not yet with go-live.. and i do not wan`t to install it again.

 
Thank you

Edited by: Patrick Raileanu on Jul 2, 2009 1:43 PM
Edited by: Patrick Raileanu on Jul 2, 2009 1:55 PM

 
#1.5 #001A64E8E162007F003EC1C70008C09C00046D590A052CC2#1246129094470#/System/Server##com.sap.caf.eu.gp.schedule.impl.ScheduleWorker#J2EE_GUEST#0##n/a##9997e9e052bd11decbdb001a64e8e162#SAPEngine_Application_Thread[impl:3]_26##0#0#Error#1#com.sap.caf.eu.gp.schedule.impl.ScheduleWorker#Plain###ERROR_ACQUIRE_CONNECTION
com.sap.caf.eu.gp.base.exception.EngineException: ERROR_ACQUIRE_CONNECTION
 at com.sap.caf.eu.gp.base.db.ConnectionPoolJ2EE.getConnection(ConnectionPoolJ2EE.java:92)
 at com.sap.caf.eu.gp.schedule.impl.ScheduleDbImpl.getScheduleToProcess(ScheduleDbImpl.java:1936)
 at com.sap.caf.eu.gp.schedule.impl.ScheduleService.getScheduleToProcess(ScheduleService.java:432)
 at com.sap.caf.eu.gp.schedule.impl.ScheduleWorker.work(ScheduleWorker.java:77)
 at com.sap.caf.eu.gp.schedule.impl.ScheduleWorker.run(ScheduleWorker.java:63)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:219)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
 
 Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: s23 t
IBM AIX RISC System/6000 Error: 2: No such file or directory
 at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:59)
 at com.sap.caf.eu.gp.base.db.ConnectionPoolJ2EE.getConnection(ConnectionPoolJ2EE.java:89)
 ... 8 more
 
 Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
IBM AIX RISC System/6000 Error: 2: No such file or directory
 at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:193)
 at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:338)
 at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:267)
 at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:51)
 ... 9 more
 
 
 
As you can see we have AIX 6.1 on Oracle 10.2.0.4 with ECC6 ..
This is a strange error because on this server we have the BI productive server and the database is always available..
Any ideas?

 
Thank you

PSRF_REPORT_CREATE message only running when outdesttype is web

Similar Messages

Maybe you are looking for