PSS Software on Lion 10.7.4 fails to load

I have recently had installed 8 video cameras all of which I can see and monitor on my iphone and ipad, however have not been able to get to them through Safari nor can i find software to work on my Mac.
The instaaler told me I had to first load XQuartz as my X11 sevver then install the PSS package. I did so folowing his instructions. When  I run the PSS software it does not open and this is what the log shows me.
6/15/12 1:09:33.353 PM
com.apple.launchd.peruser.502
([0x0-0x65065].com.PSS[1681]) Exited with code: 1
I have checkd as best as I can to ensure I have the latest versions :
XQuartz 2.7.2.
The PSS package is
file://localhost/Users/mitch/Downloads/General_PSS_Eng_MAC_IS_V4.04.7.T.20110816 .pkg
I read that the Quarantine flag could be the problem so I removed that following intsructions I found at CNet, but no change.
Any suggestions greatly appreciated.
thanks
Peter

Hi Kappy
thanks for the suggestion. the site I downloaded the Xquartz and PSS package from said it was beta. You reference is top 10.7.3 as you know. The XQuartz site http://xquartz.macosforge.org/landing/ states 2.7.2  it is for 10.6 and later including Mountian Lion.
Thanks for trying to help.
Peter

Similar Messages

  • Boot Camp For Lion -- USB ISO Method --"Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR"

    Hello, has anyone had experience with dealing with this speciifc problem?
    In short, upon rebooting, I am getting a black screen with a line of text that says, "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR." Nothing happens after that.
    I am using Mac OS X Lion 10.7.4. I have an ISO of Windows 7 Prof. along with an 8GB usb drive. I changed the coding in my bootcamp program to allow for the normally first invisible option that allows creation of a USB Installation program using an ISO that is normally only for computers without an optical drive.
    I have that box checked, the check for new software box, and the install windows box checked. I went through the process of creating the USB, downloading the software, and partitioning the drive. Then on restart, I get the failed to load bootmgr error.
    Some people have suggested using two usb drives for this. I am trying that method but it does not seem to help thus far.
    Can anyone offer any help?
    Thanks.

    from what i understand you are trying to install win 8 pro from a "backup disk" the one that you purchased from microsoft.
    this will not work, it is not an installer disk.
    you need to start the process again. erase the partition you made on your hdd. in disc utility click the minus button after selecting the bootcamp partition, then manually drag the divider down fully then apply.
    next, erase your usb then format it.
    download win 8 iso from here;
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    it is perfectly legal to use your purchased product key in this install.
    in bootcamp select the iso image you just downloaded, select your preferred partition size, check all 3 options.
    you have the support software on another usb but you wont need it so it can be discarded. the install will work far better with the iso and support on the same drive.

  • HT1338 I have version OS X 10.6.8, should I update software with Lion or Mountain Lion ??

    I have version OS X 10.6.8, should I update software with Lion or Mountain Lion ??

    Read this for apps that are lost whe you go to Lion: http://roaringapps.com/apps:table
    But you have more options that you suspect, I think.
    You can clone (CarbonCopyClone, $40 download) your drive to an external.  This is wise before any upgrade to be able to recover if the upgrade fails.
    But also you can keep a SnowLeopard external drive to run your older apps and to preserve your "fallback" in case you decide to go back (I am *not* bashing Lion or ML, just saying some people do want to go back).

  • Scanner and Software for Lion with document feeder to Scan thousands of photos

    I have an older HP PhotoSmart Print 7280 that can scan photos.  On the PC HP had software that would allow you to scan through the document feeder and batch correct/crop the photos before creating files.  This printer/scanner doesn't have HP software for Lion.  I am looking for a Scanner or Software solution that will allow me to scan through the feeder and to crop in batches.  I have used Image Capture on the Mac to scan.  It work great to crop and edit photos if you put them them on the flatbed.  You can load 3 photos and it will allow you to crop them and to make them individual files.  However if you use the "feeder" setting it treats what you are scanning as a document and you don't have the ability to edit/crop before accepting the files.  So what you get are images that have a lot of white space around them.
    I am looking for a solution that would allow me to do this in a quicker manner than 3 photos at a time on the flatbed.  I Don't rule out buying a new all in one printer to do this.  I also looked into other scanning software like VueScan, but it doesn't appear to have a batch edit/crop mode after running through the feeder.
    Any advice on how to attack this would be great.
    Thanks

    tk3900 wrote:
    what you get are images that have a lot of white space around them.
    That should be easy to fix with something like SintraWorks PDF Nomand or PDF Clerk Pro.

  • Software update server- 10.4.8 fails to update

    Hello all,
    I have a software update server and perticular updates fail when run on client computers. I have just been stuck disabling them in Server Admin. What is the easiest way to fix this. Some updates in peticular are 10.4.8 and different logic updates. Could these pkgs have become corrupted and need to be re-added to the /usr/share/swupd/html/ directory?
    thank you!

    Hi, I was wondering if you had made any progress on this problem. I have spent some time tonight looking at the update_list.txt file that the Apple Knowledge Base article shows you how to generate. I know for sure that the 10.4.8Combo updater is one that fails to install. I have noticed something that i cannot explain and would be interested to see if you see the same. Below is an excerpt from the .txt file. I noticed that some updates do not follow the folder numbering structure that the others do. The 10.4.8 Combo updater, along with a few others, begin with zzz. Any ideas on this?
    <string>/usr/share/swupd/html/061-1807/h4tBSmzXQ6sWTF9k73hYKz5hZcnJQNv7Rp/HLDSFW Updater.tar</string>
    <string>/usr/share/swupd/html/zzz061-2660/JbKdyCgpmF9jB3vYyk8hzqKf8wKkrxd8Yx/Ma cOSXUpdCombo10.4.8Intel.tar</string>
    <string>/usr/share/swupd/html/061-1750/jpc7Rxgx28fpTTF3TPS3wBvy6QqG58fnxH/LiveT ypeUpdate1.2.tar</string>
    <string>/usr/share/swupd/html/061-1686/hQf6cZrbBpnXggcsmMRmfXGnLbdBv32bSf/iPhot oUpdate201.tar</string>
    <string>/usr/share/swupd/html/061-2161/4rftGHVRPKtYqDZdPLscXB2q7VWhwcxySc/iTune sProducer.tar</string>
    <string>/usr/share/swupd/html/061-2503/XT7KVqv64gCjpqYd8Xr699YTzCM4Zdc87j/Macmi niSMCUpdate.tar</string>
    <string>/usr/share/swupd/html/061-2748/rBd6Lj2RWDkvXXBmmzP6X6yFt9vpnk2cvf/iMovi e_603.tar</string>
    <string>/usr/share/swupd/html/061-1693/GJmbmjdvKYpGvSspNH3tKRJPrKww3XGHq2/Garag eBand_11.tar</string>
    <string>/usr/share/swupd/html/061-1726/tPFZMFh24CVHFyfg2bsvYxLPDPXsCV96tP/DVDSt udioPro3.0.2Update.tar</string>
    <string>/usr/share/swupd/html/061-2510/tXrX8ZRspRydnLRT95Yn9kxqHXS3pTwg2n/Pages 2.0.1v2.tar</string>
    <string>/usr/share/swupd/html/061-1788/LYfpcCc42jr589V2zms8kgnkndRyYtdvRJ/Qmast erAppsUpdate1.2.1.tar</string>
    <string>/usr/share/swupd/html/061-1702/h6zX8TBNG6QDVPwBQhxCDHPZnZFjCjztqy/iDVD5 01Update.tar</string>
    <string>/usr/share/swupd/html/061-1733/pt4fL3fP8RwmQyhZm9NKTxSwkPH2NJGBBJ/Compr essorUpdate1.2.1.tar</string>
    <string>/usr/share/swupd/html/061-2700/nHDMySq3cmj3SrNp8QbjYPRNM4fN9t2wBF/iPhot o_605.tar</string>
    <string>/usr/share/swupd/html/zzz061-2651/hdvQ9XJg4jCKKPZhwWFNmWgzQ7kHL4J3hD/Ma cOSXUpdCombo10.4.8PPC.tar</string>
    <string>/usr/share/swupd/html/061-1859/Qdkh5w7LRbrXxStc7qvkWb5HxLhFxZYNDJ/Qmast er2.0.1.tar</string>

  • Failed to load preferences error on upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1

    Hi Folks,
    Since the upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1, i have been getting
    failed to load preferences error. During the upgrade the vpn connection get established, but once
    i disconnect and try to connect again its starts bombing on "failed to load preferences". For now
    i keep uninstalling anyconnect and reinstall an older version which while autoupgrading to 3.0.3054
    is able to connect for the first time. Its getting very painful. Any help from the support team will be
    appreciated!

    I had the same issue and it is due to corrupted preferences.xml file under /opt/cisco/vpn/profile directory. Easy way to fix is uninstall the client and remove the profile directory under /opt/cisco/vpn. Removing the profile directory requires a root access on MAC OS X.

  • I have the 11" MBA, I was updating the software to Lion X , which is free update for me. I was charged 1 rupee on my account yesterday, BUT today again I was charged 20 USD for iTunes ( which I didnot purchase). Please advice.

    I have the 11" MBA, I was updating the software to Lion X , which is free update for me. I was charged 1 rupee on my account yesterday, BUT today again I was charged 20 USD for iTunes ( which I didnot purchase). Please advice.

    The battery will run UP TO 7 hours.
    The run time depends on what you are doing.
    Anything that puts a heavy load on the CPU will reduce the run time.
    There is a fixed amount of energy in a charged battery.
    The faster you take energy out the shorter the run time will be.
    Turn off bluetooth.
    Reduce backlight to as low as is comfortable for you.  I use level 5.
    Watching video uses a lot of energy.

  • Scanner software for lion os?

    I need Microtek Artix F1 scanner software for Lion. Any suggestions?

    Check VueScan to see if it covers your scanner. Have you checked the Microtek site to see if they have a compatible driver? Or use the Snow Leopard driver you have been using. It may still work.

  • Failed to load DLL: HSAPI during Software Installation of Palm TX for Windows XP

    I have been attempting to load Palm TX software for Windows XP and receive error number: 0x80040702 Failed to load DLL: HSAPI.  I am able to download the zipped software from the Palm site.  After unpacking and beginning installation, I receive the error mentioned above.  Any ideas?
    Thanks!
    Post relates to: Palm TX

    I have been trying to REinstall PalmOne (on to Windows XP) and getting precisely the
    same message  ie  'error no 0x80040702 - failed to load dll:HSAPI'   ...  nobody seems to be able to help.
    Any suggestions please ???

  • HT4623 I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    Hi there KrisonCastillo,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Safari fails to load in Lion

    I upgaded to Lion. now safari hangs with spinning beach ball and fails to load any URL. I use a macbook. Can you help?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

  • Java7 applet fails to load on Mountain lion & Lion

    I have developed sample cocoa (64 bit) webview application with all plug In settings enabled (setJavaEnabled:YES setPlugInsEnable:YES).
    But the Java applet plugin has been failed to load. I am using latest Java 7 from Oracle (update 25). I dont know the reason why plugin is fails in my sample always. Every thing works fine with Safari and Firefox.
    The issue I am facing with both Lion and Mountain Lion (10.7.5 and 10.8.4)
    Note: Test java applet url (http://www.java.com/en/download/testjava.jsp) to check the Java version  also fails in my sample application.
    Any help would be appreciated.

    I've managed to get the second applet to load by changing the deployment of the class files. Here's what I did.
    As indicated above, the LoaderApplet is in the default package as deployed outside of any jar file. The applet that it loads by class name is in a jar file in that same directory. Under 1.5 and previous, this second applet class file was located no problems. Under 1.6, the classloader doesn't find it.
    However, I extracted the jar file into the directory structure and now it loads fine.
    Why would something like this be different across the Java versions?

  • HT1338 I begin to download mountain lion update and it fail. Then I tried again and icon shows "waiting" but it never begin to download. What can I do?

    I begin to download mountain lion update and it fail. Then I tried again and icon shows "waiting" but it never begin to download. What can I do?

    RainbowGarner wrote:
    By install i presume you mean add it to the bottom of the machine ?
    Yes, and it's rather easy to do too.
    Your machine has two slots. These are the specs for a 2008 iMac (if your machine is different then check with Crucial.com and they will match the correct RAM for your machine)
    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-6400 (800MHz) DDR2 SO-DIMM
    So all you need to do is visit Crucial.com or OtherWorld Computing to order it, and OtherWorld Computing has install videos.
    Here is one on YouTube. Easy pleasy.
    Just make sure to discharge any static electricity and not touch the contacts, just the plastic edges.
    https://www.youtube.com/watch?v=Fb_B3K1Za5Y

  • I have tried to install Mountain Lion but it has failed to install properly

    I have tried to install mountain lion but it has failed to install

    If you open Finder and open your Applications folder list, under the alphabetically listed "I"'s you should see an application called "Install OS X Mountain Lion.app", if it downloaded OK.  This is the package that you double click on to begin installation of Mountain Lion.  Have you already done this?
    Hope this helps

  • KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode

    KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode I got this today today and when i tried to complete initial set-up. it never completed. TV is going in cycles with initial set-up everytime it connects to my internet and says connected successfully. after it tries to update software and tv restartssame initial set-up screen again i tried keypad button on remote and it took me to tv. i was able to see tv that way but whenever i start tv, it goes back into initial set-up again. any solution for this?

    Hi GC_Sugarland, 
    Thank you for considering Sony Community! 
    I'm sorry to hear that this happens to your TV after the update. Pleas reset your the TV to the original setting. click on this link to guide you on how to reset it.
    I hope this helps. Please keep me posted. 
    Regards,
    Jen
    If my post answers your question, please mark it as "Accept as Solution"

Maybe you are looking for