PST Capture Import errored: Complete with errors.

we did a migration from Exchange 2007 to 2010, we already have PST files and want to import them using PST Capture to the new Mailboxes in the new domain.
while importing we were faced with an error saying "Complete with errors, hresult e_fail has been returned from a call to a com component", in the IPM subtree.Any solution to address the problem?
thanks in advance.

Hi,
Please double check whether the .pst files imported successfully (ignore the error message first).
If there is anything corrupt, I suggest remove the request and re-import it for testing.
Since I am not familiar with the PST Capture Tool, I suggest asking Script Center for help to get a script to perform the .pst files importing. For your convenience:
http://technet.microsoft.com/en-us/scriptcenter/dd742246.aspx
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

Import Items Complete with Errors

I keep getting "Import Items Complete with Errors ... 0 items have been imported into the project named 'Untitled Project (20).' Aperture failed to import the 118 items listed below" ... then it lists all the image items I am attempting to import.
I am importing directly from my Canon 7D ... as I have been able to do successfully for years without this issue. Importing RAW files.
My Library is stored on an external drive. It's a passport with 1TB of storage, with 540 GB free. I import directly to the external drive (I think that's the correct way to say what I do. I don't load direclty into aperture, edit, and then move to the external ... if that makes sense).
I have a MacBook Pro that's 3 years old and almost at storage capacity (only 10GB free out of 500GB). It uses Mac OS X, version 10.7.5.
I assume that my being almost out of storage is what's causing this issue. But, thought I'd pose the problem here for help in remedying it.
Would also love some ideas of how to work out this storage issue til the new Mac desktop comes out later this year. I cannot figure out what's using all that storage. Shows 380+GB used by "other."
Many thanks!

Yes, it may be a problem of not enough disk space. To check this, try if you can import the files, if you only try to import one file at a time. If a single file imports well, you need to free space.
If not, it may be a problem of a corrupted library. Then try the Aperture Library First Aid Tools (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual). But to run them, you will first need to free disk space as well.
To find out, what is using the space on the internal drive, run Omni DiskSweeper.
Kirby Krieger has posted a link here: Re: Size of Library
It will ist the items sorted by size, so you will see exactly, what is occupying the space.
Regards
Léonie

Import Journal Completed with warning

Import Journal Completed with warning "no data found" but data exist in GL_INTERFACE against group_id
<< gllfss() 20-SEP-2010 10:02:23
gllcje() 20-SEP-2010 10:02:23
glluch() 20-SEP-2010 10:02:24<< glluch() 20-SEP-2010 10:02:24
LEZL0008: Found no interface records to process.
LEZL0009: Check SET_OF_BOOKS_ID, GROUP_ID, and USER_JE_SOURCE_NAME of interface records.
If no GROUP_ID is specified, then only data with no GROUP_ID will be retrieved. Note that most data
from the Oracle subledgers has a GROUP_ID, and will not be retrieved if no GROUP_ID is specified.
Pl suggest solution....

Journal Import can be classified as With specific group Id, All Group Ids and no Group Id.
Data from subledger will generally have group id. Try journal import run with selection criteria as "All Group ids". No group Id is used to import data without group id.
Regards,
Chirag

Import Items Completed with Errors

I recently upgraded to Mac OSX 10.7.2 and Aperture 3.2. Since then I have been unable to import any new photos into Aperture. After reading the Aperture Discussions, I restarted Aperture while holding down the Alt and Command keys to run diagnostics. First I tried correcting permissions.
Quit and restarted Aperture after it was finished, then tried Import again but got the same error on all photos.
Quit Aperture again, then restarted while holding down Alt and Command keys. Ran the examine and repair database option this time. Quite and restarted Aperture, then tried a new Import. Same result, all photos rejected.
Before I try rebuilding the database, is there anything else I need to look for that may be causing this? Any help will be greatly appreciated.

Update.
I had been trying to Import from a flash drive (2GB) so I decided to first copy the photos to a folder on the desktop. I then restarted Aperture and was able to successfully import from the desktop folder. Then I tried to redo the Import from the flash drive. I quit and restarted Ajperture, plugged in the flash drive, did the Import and it worked just fine. However, when I tried to quit Aperture, it would not quit. Finally (after 5 minutes) I had to Force Quit it.
I guess my original problem is resolved, but I would love to know why it happened at all.

Lost photos due to Image Capture Import Error

Hi.. I lost my hundreds of precious photos taken during my vacation during the import process using Image Capture.
I took hundreds of photos in my iphone 5s during my vacation. I came back and haven't started the iphone backup yet which was my first mistake. I then used Image Capture in my MacBook Pro to transfer the photos from 5s camera roll to a folder in my macbook. I checked the option "Delete After Import" which was my second mistake!
During the transfer, it successfully transferred some of the photos but over half of them were not. There was errors after the import process so those error out pictures were not found neither in my Macbook nor in my iphone.
I tried different recovery tool to scan my iphone or my macbook but still no luck. Can you one of you give me some help on this? What else can be done to recover the lost picture. A million million thanks to you all in advance!

Same thing happened to me. I tried using iPhoto to back up over 8,000 photos. Unfortunately, I kept getting an error at around 3,000 and had to start over several times. After restarting my macbook, I was able to get further but after around 1,000 to go, the error popped up again! Hours! So I chose Image capture to get everything. I too selected 'delete after copying' to avoid having to delete 8k pics manually. After it was done, I was alerted that some photos could not be copied. When I checked the folder, only 4k pics were there! Where's the other 4k? On top of that, my phone which is over capacity still shows over capacity and has about 600 files with missing icons on them. Not sure what to do. Curious if a restoration of the phone will bring it all back.

Import Term Set with Greek character set

I have been trying to import a Term Set, from a CSV file created using the standard template of SharePoint 2010, however only the first 10 terms get imported. As far as I know, there is no such limitation and the total number of terms in the Term Store
is very small. The import procedure completes with no error message.
Can anybody enlighten me as to why this is happening?
This is a sample of the CSV I am using:
"Term Set Name","Term Set Description","LCID","Available for Tagging","Term Description","Level 1 Term"
"ΜΟΑ - Δήμοι","Δήμοι Κύπρου.",,True,,"Αγγαστίνα"
,,,True,,"Αγγλισίδες"
,,,True,,"Αγγολέμι"
,,,True,,"Αγιά (Aγιά Κεπίρ)"
,,,True,,"Αγία Άννα"
,,,True,,"Αγία Βαρβάρα Λευκωσίας"
,,,True,,"Αγία Βαρβάρα Πάφου"
,,,True,,"Αγία Ειρήνη Κερύνειας"
,,,True,,"Αγία Ειρήνη Λευκωσίας"
,,,True,,"Αγία Μαρίνα Κελοκεδάρων"
,,,True,,"Αγία Μαρίνα Ξυλιάτου"
,,,True,,"Αγία Μαρίνα Σκυλλούρας"
,,,True,,"Αγία Μαρίνα Χρυσοχούς"
etc.
Note: The CSV file has been saved with UTF-8 encoding and the first 10 terms (that do get imported) correctly appear in the Term Store.

Hi,
From your description, I know you do not import all terms when you import a term set.
To reproduce your issue, I copied the items in your issue to my environment, then imported them in to my SharePoint. All items had been imported in my SharePoint, but I found
that default displaying items were the first 10 terms. The screenshot below is my result:
Please click here to find your other terms.
You can refer to this article:http://sharepointquester.com/2012/03/12/importing-term-sets-from-csv-in-sharepoint-2010/.
Best Regard
Vincent Han
TechNet Community Support

PST Capture to Office 365 fails with Import error : Error opening PST File

Hello everybody
I was dealing for more than a week to make it work this tool, Capture PST.}
Already have all requirements: and tried to install in different environments like Server 2008r2 or Windows 8 (not 8.1)
PST Capture Console is installed on the Domain Joined Machine.
You have mentioned that the User Account (PST Capture Tool's Service Account) is a Local Administrator on the Machine running the Tool.
You also have the Outlook 2010 X64 installed
And you have created the outlook profile for that Service Account.
Also not have any non-email items on my pst, is only a test PST with 2MB emails as a test.
I came back from Office 365 forum and they said you are the best guys for this topic.
http://community.office365.com/en-us/f/158/p/318111/919839.aspx#919839
Jose Chavez IT Manager

Dear friend
Finally make it work after 2 weeks of war. Is not a product that you can use in your production environment, because have several complains.
Only works with PST which have Mail items (non calendars, or task, or contacts) and even you can not have a folder structure inside your Inbox, so it is not worth it.
Jose Chavez IT Manager

PST Capture 2.0 - Import Errors - Unable to translate Unicode character

Currently using the Office 365 service. I have installed both the PST Capture Console as well as the 64-bit Agent on to a Windows 7 64-bit laptop which has Office 2013 64-Bit installed.
Scenario: A misconfigured retention policy in Office 365 accidentally deleted thousands of email messages from an employee's mailbox. We've obtained the .ost file and using a Third Party tool have converted the OST to a PST file. I am able to add the file
to my Outlook profile and see the recovered contents. Normally I would just copy the contents of the PST file back to the mailbox but it randomly errors out during the copy process forcing me to start over. The PST is roughly 8.5 GB.
I setup the PST Capture tool to try and migrate the PST contents back to the mailbox. I am able to locate the PST and import it to the mailbox in question but when the import has completed, it says "Complete with errors". Reviewing the Message
Alerts tab, it has 70,314 errors (pretty much every email). The error is difficult to understand but it is the same for each item:
"Unable to translate Unicode character \uDC47 at index 6 to specified code range"
Looking for any suggestions/advice on maybe what to look at.
Thank you all!

I went to Shared Components -> Static Files -> Create
I have split my exported application file, creating various size files for testing, ranging from 380 Kb to 1638 Kb (halves, quarters, eighths). Sometimes I can upload; sometimes I can't. Typically I can upload several. But once I get the error, it's fairly consistent in failing but not 100%. At least once, I've uploaded all four quarters of the file plus an additional half of the original (4 eighths, all different). But I can't find the pattern of failure. The most consistency I see is once it starts failing, I can almost always get it to be successful again if I click around APEX and come back to uploading.
I've tried to upload one half of the file. That failed except for the first few times I tried to do it. It always failed when I tried to upload a second half of the file. That's why I continued dividing the file into smaller pieces. I thought maybe there was something inherent in the file causing the problem. But since I have subsequently load all four quarters, I guess that can't be it.
I've also deleted files at various times throughout. Sometimes I can upload and sometimes I can't after that. And again, often I can get back into "Success" mode by clicking around the interface and then returning to upload files.
Thank you,
-J
Edited by: jsorense1 on Sep 16, 2008 10:06 AM
Edited by: jsorense1 on Sep 16, 2008 11:45 AM

PST Capture error when trying to import .PST files

I am currently migrating mailboxes from Exchange 2010 to Exchange 2013 on prem. I have installed PST Capture 2.0 and 64-bit Outlook 2013 on a Windows 2008 R2 machine and have installed the PST Capture 2.0 agent on a workstation that has some .pst files
on it. PST Capture finds all the .pst files on the workstation, but when I use PST Capture to try to import PST files into a mailbox on Exchange 2013, I get the error "Import error: Error opening mailbox [email protected]".
I created a userID with a mailbox to run PST Capture. Based on the instructions at
https://technet.microsoft.com/en-us/library/hh781035%28v=exchg.141%29.aspx I have made that user a member of the groups that are assigned the Public Folder Management role, the Mailbox Import Export role and the Organizational Management role. The
user is also a local admin on the machine running the PST Capture console. While the error sounds like a permissions issue, these are the only permissions I could find documented for PST Capture. I am starting PST Capture with "Run as administrator"
Any ideas why this isn't working? Are there any other permissions that the PST Capture user needs? Is there anything else I need to do?
Thank you very much for your help.

Generally PST capture tool allows you to search for PST files & import these PST files
to the mailboxes but as your account is not getting connected, so you need to check settings of your PST Capture tool :
https://technet.microsoft.com/en-us/library/hh781032(v=exchg.141).aspx
If this solution does not work out for you, then I would advise you to use any professional
tool for exchange migration like CodeTwo , Stellar. From my personal experience, I would recommend you to go for Stellar Mailbox Extractor for Exchange Server as it migrated my mailboxes to another Exchange Server in quick time.

Item Import - completes with " Completed Error" status and process_flag=4

I am trying to Import Item through Open Interface.
RDBMS : 9.2.0.5.0
Oracle Applications : 11.5.10
Populated data into mtl_system_items_interface with process_flag = 1.
Once I run the "Item Import" program it completes with error, with the following in the log file.
The records are updated with process_flag = 4. but there are no error details in mtl_interface_errors for those corresponding records in the interface table.
How do I identify the error ?
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Inventory: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
INCOIN module: Import Items
Current system time is 07-SEP-2010 11:39:11
Page Length = 93, Page Width = 132
===================================================================
Debug Mode : Enabled
Output to Terminal : No
Argument Method : Database Fetch
Trace Mode : Disabled
===================================================================
Argument 1 (ORG_ID) = 174
Argument 2 (ALL_ORG) = 1
Argument 3 (VAL_ITEM_FLAG) = 1
Argument 4 (PRO_ITEM_FLAG) = 1
Argument 5 (DEL_REC_FLAG) = 1
Argument 6 (PROCESS_SET) = 11
Argument 7 (CREATE_UPDATE) = 1
===================================================================
Item Catalog Group Descriptive Elements Open Interface import completed successfully for all records in this record set.
Item Catalog Group Descriptive Elements Open Interface import completed successfully for all records in this record set.
Start of log messages from FND_FILE
End of log messages from FND_FILE
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Found a few Packages related to Item revision , were in Invalid status.
Compiled them all and now the items are getting imported without any issue.
Thanks Sandeep for your word.

XML import issue in Primavera P6: "Process completed with errors."

When trying to import a small XML file (from MS Project 2010) to P6 server via P6 V7 CITRIX client, then I receive the message "Process completed with errors. See log file for details.".
But the log files are fine (no error, no warning, final validation status in log file is "successful").
And no additional project shows up in the EPS.
// Permissions checked. They are sufficient.
// File is valid (importable by two other users to the same P6 server: one with local P6 V7 client, one via CITRIX P6 V7 client).
// I used the same import template as the other two other users.
// XML contains two tasks only.
// No resources and no empty rows are in the MPP file, where the XML is created from.
Does anyone know what to do upon this message, or where the "errors" can be seen (what is neither in the import log files, nor in the PrimaveraLogs folder (P6WebAccess.html), nor in detailed P6 application logfile (I had this activated, but it showed only called features without status, errors or warnings)).
I highly appreciate any idea! ...

Hello Rsandilands1
I just read your query and I am very curious if you did find the right solution? It seems that I am having the same sort of problem.
Best regards,
Pal1

PST Capture Error

Hello experts,
I have a user mailbox migration problem using the PST Capture , the tool has worked in my organization but since last week the following error occurs :
Import error : The specified object was not found in the store .
Event create: Import Action Error during import Microsoft.Exchange.WebServices.Data.ServiceResponseException: The specified object was not found in the store. at RedGate.PSTImporterForExchange.CentralService.ImportListImporter.ImportFile(RepositoryImportFile
file) at RedGate.PSTImporterForExchange.CentralService.Actions.StartImportAction.RunImport(Object state)
Have reinstalled the tool and tried with another user environment but got the same error , any ideas?
thank you

Generally PST capture tool allows you to search for PST files & import these PST files
to the mailboxes but as your account is not getting connected, so you need to check settings of your PST Capture tool :
https://technet.microsoft.com/en-us/library/hh781032(v=exchg.141).aspx
If this solution does not work out for you, then I would advise you to use any professional
tool for exchange migration like CodeTwo , Stellar. From my personal experience, I would recommend you to go for Stellar Mailbox Extractor for Exchange Server as it migrated my mailboxes to another Exchange Server in quick time.

Report Completed with error...

Hi There,
Account Analysis Report in oracle ebs R12 completed with error please find below error message.
Warning!!! Due to high volume of data, got out of memory exception...***
****Please retry with scalable option or modify the Data template to run in scalable mode...***
java.util.logging.ErrorManager: 2:
oracle.core.ojdl.LoggingException: oracle.core.ojdl.LoggingException: Attempt to flush a closed LogWriter
at oracle.core.ojdl.ExceptionHandler.onException(Unknown Source)
at oracle.core.ojdl.BufferedLogWriter.handleException(Unknown Source)
at oracle.core.ojdl.BufferedLogWriter.flush(Unknown Source)
at oracle.core.ojdl.logging.ODLHandler.flush(Unknown Source)
at oracle.core.ojdl.logging.ODLHandler.publish(Unknown Source)
at java.util.logging.Logger.log(Logger.java:472)
at java.util.logging.Logger.doLog(Logger.java:494)
at java.util.logging.Logger.log(Logger.java:517)
at oracle.ias.cache.CacheInternal.logLifecycleEvent(Unknown Source)
at oracle.ias.cache.CacheInternal.close(Unknown Source)
at oracle.ias.cache.Cache.close(Unknown Source)
at oracle.apps.jtf.cache.IASCacheProvider$CacheStopperThread.run(IASCacheProvider.java:1480)
Caused by: oracle.core.ojdl.LoggingException: Attempt to flush a closed LogWriter
... 10 more
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1762394 on node ORAPRD at 07-APR-2012 10:24:48.
Post-processing of request 1762394 failed at 07-APR-2012 10:24:49 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 07-APR-2012 10:24:49
its a very important report please help me out in this regards,
Thanks in advance.
Regards,
Mohsin
Edited by: 920138 on Apr 6, 2012 11:37 PM

Please post the details of the application release, database version and OS.
Can you find any errors in the OPP log file?
Please see these docs.
XLAAARPT: Account Analysis Report Errors with Warning: Due to High Volume Of Data Got Out Of Memory Exception Please Retry With Scalable Option Or Modify The Data Template To Run In Scalable Mode [ID 1304660.1]
SLA: How to Troubleshoot XML Performance Issues in the Account Analysis & Journal Entries Report [ID 983063.1]
How to Configure the Account Analysis Report in Release 12 for Large Reports [ID 737311.1]
R12: XLAAARPT - Subledger Accounting Account Analysis Report, gets Out of Memory Exception, Retry with Scalable Option [ID 836551.1]
R12: AP Trial Balance Complete With Warning The Output Post-processor is Running But Has Not Picked up This Request [ID 1224684.1]
R12 Subledger Period Close Exception Report (XLAPEXRPT) Errors With: "out of memory exception" [ID 952747.1]
Account Analysis Report Shows Results in XML [ID 1325208.1]
R12: Troubleshooting Known XML Publisher and E-Business Suite (EBS) Integration Issues [ID 1410160.1]
Thanks,
Hussein

Abap import error completed 162 error 1 total 164

hi experts
i am installing ecc6.0 ehp 7 ides system sybase database,linux 6.4 operating system.
got error when installing the ides ehp7 system in baap import phase.
total 164 completed 162 errors 1 running 1
import_monitor.log
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /home/ides7/EXPORT2/DATA_UNITS/EXPORT7/DB/SQLFiles.LST
(SQL) INFO: found /home/ides7/EXPORT2/DATA_UNITS/EXPORT7/DB/SQLFiles.LST
(SQL) INFO: Trying to open /home/ides7/EXPORT2/DATA_UNITS/EXPORT7/DB/SQLFiles.LST
(SQL) INFO: /home/ides7/EXPORT2/DATA_UNITS/EXPORT7/DB/SQLFiles.LST opened
(SQL) INFO: Searching for SQL file APPL0.SQL
(SQL) INFO: APPL0.SQL not found
(SQL) INFO: Searching for SQL file /home/ides7/EXPORT2/DATA_UNITS/EXPORT7/DB/SYB/APPL0.SQL
(SQL) INFO: /home/ides7/EXPORT2/DATA_UNITS/EXPORT7/DB/SYB/APPL0.SQL not found
(DB) INFO: SKAT~001 dropped
(DB) ERROR: DDL statement failed
(CREATE INDEX "SKAT~001" ON "SKAT" ( "MANDT" , "SPRAS" , "MCOD1" ) with consumers = 3 )
DbSlExecute: rc = 99
(SQL error 21)
error message returned by DbSl:
[ASE Error SQL21][SAP][ASE ODBC Driver][Adaptive Server Enterprise]WARNING - Fatal Error 9829 occurred at Jun 25 2014 1:46PM. Please note the error and time, and contact a user with System Administrator (SA) authorization.
[ASE Error SQL21][SAP][ASE ODBC Driver][Adaptive Server Enterprise]WARNING - Fatal Error 9829 occurred at Jun 25 2014 1:46PM. Please note the error and time, and contact a user with System Administrator (SA) authorization.
[ASE Error SQL21][SAP][ASE ODBC Driver][Adaptive Server Enterprise]WARNING - Fatal Error 9829 occurred at Jun 25 2014 1:46PM. Please note the error and time, and contact a user with System Administrator (SA) authorization.
(DB) INFO: disconnected from DB
/usr/sap/ID9/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/ID9/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140625134632
WARNING: 2014-06-25 12:47:26
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2014-06-25 12:47:26
1 error(s) during processing of packages.
INFO: 2014-06-25 12:47:26
Import Monitor is stopped.
INFO: 2014-06-25 13:46:00
Import Monitor is started.
CONFIG: 2014-06-25 13:46:00
Application options:
collectLogicalPackages=false
dbCodepage=4103
dbType=SYB
extFiles=no
importDirs=/home/ides7/EXPORT1/DATA_UNITS/EXPORT1:/home/ides7/EXPORT1/DATA_UNITS/EXPORT2:/home/ides7/EXPORT1/DATA_UNITS/EXPORT3:/home/ides7/EXPORT1/DATA_UNITS/EXPORT4:/home/ides7/EXPORT1/DATA_UNITS/EXPORT5:/home/ides7/EXPORT1/DATA_UNITS/EXPORT6:/home/ides7/EXPORT2/DATA_UNITS/EXPORT7:/home/ides7/EXPORT2/DATA_UNITS/EXPORT8:/home/ides7/EXPORT2/DATA_UNITS/EXPORT9:/home/ides7/EXPORT2/DATA_UNITS/EXPORT10:/home/ides7/EXPORT2/DATA_UNITS/EXPORT11
installDir=/tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/INSTALL/BS2013/ERP607/SYB/STD/ABAP
jobNum=3
loadArgs=-c 99000000 -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=/usr/sap/ID9/SYS/exe/uc/linuxx86_64/R3load
sapinst=
trace=all
tskFiles=yes
CONFIG: 2014-06-25 13:46:00
List of packages with table structure: 'SAP0000'.
CONFIG: 2014-06-25 13:46:00
List of packages with views: 'SAPVIEW'.
TRACE: 2014-06-25 13:46:00 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/INSTALL/BS2013/ERP607/SYB/STD/ABAP/DDLSYB.TPL' template file is started.
INFO: 2014-06-25 13:46:00 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/BS2013/BS2013/ERP607/SYB/INSTALL/BS2013/ERP607/SYB/STD/ABAP/DDLSYB.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2014-06-25 13:46:01
Data codepage 4103 is determined using TOC file '/home/ides7/EXPORT1/DATA_UNITS/EXPORT1/DATA/SAPAPPL1_43.TOC' for package 'SAPAPPL1_43'.
INFO: 2014-06-25 13:46:01 com.sap.inst.migmon.LoadThreadDispatcher loadPackage_report
Monitor jobs: running 1, waiting 1, completed 162, failed 0, total 164 Package Group max threads: 3 current running threads : 0 processing package: SAPAPPL0_17
TRACE: 2014-06-25 13:46:01 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0_17' import package is started.
TRACE: 2014-06-25 13:46:01 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0_17' starting import package into database:
/usr/sap/ID9/SYS/exe/uc/linuxx86_64/R3load -i SAPAPPL0_17.cmd -dbcodepage 4103 -l SAPAPPL0_17.log -c 99000000 -loadprocedure fast
INFO: 2014-06-25 13:46:32 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 162, failed 1, total 164 error processing of package SAPAPPL0_17
ERROR: 2014-06-25 13:46:32 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0_17' import package is interrupted with R3load error.
Process '/usr/sap/ID9/SYS/exe/uc/linuxx86_64/R3load -i SAPAPPL0_17.cmd -dbcodepage 4103 -l SAPAPPL0_17.log -c 99000000 -loadprocedure fast' exited with return code 2.
For mode details see 'SAPAPPL0_17.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2014-06-25 13:47:00
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2014-06-25 13:47:00
1 error(s) during processing of packages.
INFO: 2014-06-25 13:47:00
Import Monitor is stopped.
please suggest asp
thanks & regards
sanath

Hello,
I have exactly the same issue as you have.
as I checked in the sybase database, actually the index SKAT~001 already exists.
if I run sql statement CREATE INDEX [SKAT~001] ON "SKAT" ("MANDT","SPRAS","MCOD1") with consumers = 3, via Toad or any other tools, it says the index already there.
So i think this error could be ignored, just set ok instead of err in file SAPAPPL0_17.TSK
I SKAT~001 C ok
and then retry to continue the installation steps, it works well.
best regards,
Fresh

Data pump import error with nested tables

So the problem is somewhat long :)
Actually the problems are two - why and how oracle are treating OO concept and why data pump doesn't work?
So scenario for the 1st one:
1) there is object type h1 and table of h1
2) there is unrelated object type row_text and table of row_text
3) there is object type h2 under h1 with attribute as table of row_text
4) there is table tab1 with column b with data type as table of h1. Of course column b is stored as nested table.
So how do you think - how many nested tables Oracle will create? The correct answer is 2. One explicitly defined and one hidden with system
generated name for the type h2 which is under type h1. So the question is WHY? Why if I create an instance of supertype Oracle tries to adapt
it for the subtype as well? Even more if I create another subtype h3 under h1 another hidden nested table appears.
This was the first part.
The second part is - if I do schema export and try to import it in another schema I got error saying that oracle failed to create storage table for
nested table column b. So the second question is - if Oracle has created such a mess with hidden nested tables how to import/export to another
schema?
Ok and here is test case to demonstrate problems above:
-- creating type h1 and table of it
SQL> create or replace type h1 as object (a number)
2 not final;
3 /
Type created.
SQL> create or replace type tbl_h1 as table of h1;
2 /
Type created.
-- creating type row_text and table of it
SQL> create or replace type row_text as object (
2    txt varchar2(100))
3 not final;
4 /
Type created.
SQL> create or replace type tbl_row_text as table of row_text;
2 /
Type created.
-- creating type h2 as subtype of h1
SQL> create or replace type h2 under h1 (some_texts tbl_row_text);
2 /
Type created.
SQL> create table tab1 (a number, b tbl_h1)
2 nested table b
3 store as tab1_nested;
Table created.
-- so we have 2 nested tables now
SQL> select table_name, parent_table_name, parent_table_column
2 from user_nested_tables;
TABLE_NAME                     PARENT_TABLE_NAME
PARENT_TABLE_COLUMN
SYSNTfsl/+pzu3+jgQAB/AQB27g== TAB1_NESTED
TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H2")."SOME_TEXTS"
TAB1_NESTED                    TAB1
B
-- another subtype of t1
SQL> create or replace type h3 under h1 (some_texts tbl_row_text);
2 /
Type created.
-- plus another nested table
SQL> select table_name, parent_table_name, parent_table_column
2 from user_nested_tables;
TABLE_NAME                     PARENT_TABLE_NAME
PARENT_TABLE_COLUMN
SYSNTfsl/+pzu3+jgQAB/AQB27g== TAB1_NESTED
TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H2")."SOME_TEXTS"
SYSNTfsl/+pz03+jgQAB/AQB27g== TAB1_NESTED
TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H3")."SOME_TEXTS"
TAB1_NESTED                    TAB1
B
SQL> desc "SYSNTfsl/+pzu3+jgQAB/AQB27g=="
Name                                      Null?    Type
TXT                                                VARCHAR2(100)OK let it be and now I'm trying to export and import in another schema:
[oracle@xxx]$ expdp gints/xxx@xxx directory=xxx dumpfile=gints.dmp logfile=gints.log
Export: Release 11.2.0.1.0 - Production on Thu Feb 4 22:32:48 2010
<irrelevant rows skipped>
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "GINTS"."TAB1"                                  0 KB       0 rows
. . exported "GINTS"."SYSNTfsl/+pz03+jgQAB/AQB27g=="         0 KB       0 rows
. . exported "GINTS"."TAB1_NESTED"                           0 KB       0 rows
. . exported "GINTS"."SYSNTfsl/+pzu3+jgQAB/AQB27g=="         0 KB       0 rows
Master table "GINTS"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
******************************************************************************And now import. In order to create types transformation of OIDs is applied and also remap_schema
Although it fails to create the table.
[oracle@xxx]$ impdp gints1/xxx@xxx directory=xxx dumpfile=gints.dmp logfile=gints_imp.log remap_schema=gints:gints1 transform=OID:n
Import: Release 11.2.0.1.0 - Production on Thu Feb 4 22:41:48 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Release 11.2.0.1.0 - Production
Master table "GINTS1"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "GINTS1"."SYS_IMPORT_FULL_01": gints1/********@xxx directory=xxx dumpfile=gints.dmp logfile=gints_imp.log remap_schema=gints:gints1 transform=OID:n
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"GINTS1" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TYPE/TYPE_SPEC
Processing object type SCHEMA_EXPORT/TABLE/TABLE
ORA-39083: Object type TABLE:"GINTS1"."TAB1" failed to create with error:
ORA-02320: failure in creating storage table for nested table column B
ORA-00904: : invalid identifier
Failing sql is:
CREATE TABLE "GINTS1"."TAB1" ("A" NUMBER, "B" "GINTS1"."TBL_H1" ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
ORA-39083: Object type INDEX_STATISTICS failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
DECLARE I_N VARCHAR2(60);   I_O VARCHAR2(60);   c DBMS_METADATA.T_VAR_COLL;   df varchar2(21) := 'YYYY-MM-DD:HH24:MI:SS'; BEGIN DELETE FROM "SYS"."IMPDP_STATS";   c(1) :=   DBMS_METADATA.GET_STAT_COLNAME('GINTS1','TAB1_NESTED',NULL,'TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H2")."SOME_TEXTS"',1); DBMS_METADATA.GET_STAT_INDNAME('GINTS1','TAB1_NESTED',c,1,i_o,i_n);   INSERT INTO "
ORA-39083: Object type INDEX_STATISTICS failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
DECLARE I_N VARCHAR2(60);   I_O VARCHAR2(60);   c DBMS_METADATA.T_VAR_COLL;   df varchar2(21) := 'YYYY-MM-DD:HH24:MI:SS'; BEGIN DELETE FROM "SYS"."IMPDP_STATS";   c(1) :=   DBMS_METADATA.GET_STAT_COLNAME('GINTS1','TAB1_NESTED',NULL,'TREAT(SYS_NC_ROWINFO$ AS "GINTS"."H3")."SOME_TEXTS"',1); DBMS_METADATA.GET_STAT_INDNAME('GINTS1','TAB1_NESTED',c,1,i_o,i_n);   INSERT INTO "
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Job "GINTS1"."SYS_IMPORT_FULL_01" completed with 4 error(s) at 22:41:52So any idea how to make export/import of such tables?
TIA
Gints

Tom Kyte has said it repeatedly ... I will repeat it here for you.
The fact that Oracle allows you to build object tables is not an indication that you should.
Store your data relationally and build object_views on top of them.
http://www.morganslibrary.org/reference/object_views.html
If you model properly, and store properly, you don' have any issues.

PST Capture Import errored: Complete with errors.

Similar Messages

Maybe you are looking for