PST File Password Recovery
Dear All,
How can I recover PST file password in Outlook 2003.
Is there any paid tool or some method to recover pst password?
Many thanks!
You may take a look at:
http://www.filerepairforum.com/forum/microsoft/microsoft-aa/outlook/458-%E2%80%8Bpst-password-for-microsoft-outlook-2003
Alternative resolution can be:
Step 1: Close Outlook program and create backup of PST file
Step 2: Now run SCANPST.EXE on copy of your PST and repair
SCANPST.EXE is found in these locations according to different Outlook versions:
In MS Outlook 2002/XP: C:\Program Files\Common Files\System\MAPI\ \scanpst.exe
In MS Outlook 2000:C:\Program Files\Common Files\System\MAPI\ \NT\scanpst.exe
In MS Outlook 97/98:C:\Program Files\Common Files\Windows Messaging\scanpst.exe
Note: Do not use backup option in SCANPST.EXE as you working with a duplicate copy of PST file.
Step 3: Then open the command prompt by clicking Start >> Run
Step 4: Paste or type the file path to PST19UP and your PST name: PSTUPG19.EXE-filename.pst and press Enter.
Step 5: The command line will resemble: “C:\My Documents\pst19upg.exe”- Outlook.pst.
Step 6: A new copy of the PST file will be created, which is called “filename.psx”.
Step 7: Once you have completed, rename the original PST file.
Step 8: Now at the Command Prompt, type “pst19upg.exe- filename.psx” and press Enter
Step 9: A new password-free PST file will be created from PSX file.
Step 10: Now open your MS Outlook program and open the PST file.
Similar Messages
-
Microsoft Outlook .pst file password cracker
Are exists pst password cracker? I forgot password for my Microsoft Outlook .pst file with messages. Can suggests a good software for my case?
Your problem can be resolved a lot of tools. To do this purpose need to know. Try to do it with the
help of Recovery ToolBox for Outlook Password. Note: You
can use Recovery ToolBox for Outlook Password to recover only the data you legally own. Good Luck! http://www.outlookpassword.recoverytoolbox.com -
Remove password from .pst file
Dear Support,
How to remove forgetten password from .pst file.
I use OS win7 professional and Ms office 2013. So please help me for removing forgetting pst password.
When I add pst file in new outlook. Then Pst file ask password.
please help me.
I will be thank ful to you.the goals of a password is to protect the contents from anyone who does not know the password.
As far as I know, there are no tools provided by Microsoft to remove, alter or read the password from a protected pst file. It might even violate local laws to do so.
https://support.office.com/en-ca/article/I-forgot-my-Personal-Folders-file-pst-password-cfaec399-0de7-4f8f-a81b-918b38867ed6
Some third parties might claim to have tools that remove, alter or read the pst password, but I should urge you to be prudent when testing/using such tools (or paying for them).
MCP/MCSA/MCTS/MCITP -
Remove forgotten password for pst file
how to remove forgotten password for pst file
There are lot of 3rd party tools available to remove/Recover Password which is set for a PST file.
I found this to be useful as i was able to recover a password once: www.nirsoft.net/utils/pst_password.html
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!! -
Web Server 6.1 - How recovery Key Pair File Password
I have installed Sun Web Sever 6.1, i am initialized Trust Database, then I generate Request a Certificate for verisign, then verisign send me the Certificate but when i tray install the certificate he say me invalid password, I dont remenber the Key Pair File Password who can recory Key Pair File Password?
Please help me!Assuming that the security libraries are working the way they're supposed to, the password is not recoverable.
Your best option, other than trying really hard to remember your password, is to delete the certificate and key databases and start over. -
Outlook 2007 won't open .pst file from Outlook 2000
I have been using Outlook 2000 for 10 years and hit the 2GB limit. As a result, Outlook 2000 would not open mail and did not permit me to delete mail to clear space.
I’d been meaning to install my Office 2007 and this seemed like the time to do so. Once installed, I attempted to open my 2 GB PST file in Outlook 2007. No luck.
Messages: “The message interface has returned an unknown error. If the problem persists, restart Outlook.” And “Cannot display information. There is either a problem connecting to the server or an error has occurred.”
Researching on the Web, I found Microsoft guidance that I could create a new data file and import the old (ANSI) .PST file into this new (Unicode) .PST file. When I did
that, during the Import, I encountered another error message: “The file has reached its maximum size. (Followed by two unhelpful sentences – can’t be imported).”
OK, I think, I have to reduce the size of that file. Research yields Microsoft’s “oversized PST and PST crop tool.”
http://support.microsoft.com/kb/296088 I do that and follow the instructions to scan the truncated file with Microsoft’s
scanpst.exe tool, which is included with Office.
Another error: scanpst.exe will not complete its scan. I receive a mysterious error message with no indication what the exact problem is. I created multiple versions
of the truncated .PST file, each smaller than the last, so that the smallest was 1.7 GB. Still errors with scanpst.exe and ultimately no luck.
I have spent more than 10 hours trying to solve this problem and am at wit’s end. I’m a freelance writer, and it’s costing me money. What’s worse,
info on projects I’m supposed to be working on are locked in that PST file! All data is stored locally on a Dell laptop with Windows 7.
Help anybody? Please? Thank you!Fifteen hours later, I was back in business, having upgraded from Outlook 2000 to Outlook 2007, a process one would expect to take a half-hour tops. I'm no IT pro, but
I am pretty accomplished at fixing problems. This one seemed beyond my reach, as neither of the utilities Microsoft recommended to address the issue, the truncation tool and scanpst.exe, worked -- what a surprise! I engaged a local technician to diagnose the
problem remotely, and over a course of four hours he fixed it using a third-party program called "Outlook Recovery Toolbox." I'd actually downloaded that tool and fooled around a bit, but didn't use it for a full scan as I think that required a purchase, and
who knows if it's malware or what. Well, it worked.
So 15 hours lost. That cost me hundreds of dollars as I am self-employed, plus I have a $150 bill from the technician, which is more than fair for his two hours of labor
(the extra two hours were scanning and importing time). Again, Microsoft managed to turn into an epic ordeal what the consumer expects to be a straightforward upgrade process.
Now I have Outlook 2007, oh boy! The first thing I notice is the inflexible mail header above the message body. WTF is that supposed to be? Who was the Einstein who thought
that up? It renders USELESS like an inch of real estate right in the center of the screen! I find that it can be hidden (not, of course, with a simple, convenient and sensible right click ... oh NOOOO ... but through multi-click options available in the toolbar).
(For background, Outlook 2000 did not have that inflexible mail header -- the header info (subject, date, sender, CC) was part of the email, so if you scrolled down the
email, the header went with it and made the best possible use of available space).
Now here's a twist -- Outlook does not show, in your list of emails, whether an email has an attachment if the email was sent via Lotus Notes. That was a glitch in 2000,
and one I would expect to have been resolved in 2007. BUT NO. So, just moments ago, I have an email/meeting invitation sent from a client using Lotus Notes. Even though I had told Outlook to hide headers, it disobeyed me ...
why? Because this was a "meeting invite" email, offering me options, in that stupid inflexible header, to Accept, Decline, Propose New Time, & etc. Well, those options only increased the size of that inflexible header, so that the visible area of
the email WAS LESS THAN ONE INCH HIGH. Yes, I can adjust it -- how very productive!
These two Microsoft glitches / manifestations of poor design -- no alerting to attachments from Lotus clients and that horrid header -- very nearly conspired to cause
me to miss a critical attachment displayed only at the very bottom of the email. The document attached needs to be read and commented before the meeting, and only by the grace of God did I happen to scroll, IN THAT 3/4 INCH MAIL WINDOW, to the bottom and happen
to spot said critical attachment.
Do I expect anything more from Microsoft ... other than more grief and stupidity? Sadly, I do not. It is my misfortune in life to have to use Microsoft Word on a daily
basis, as I have for the past 10 years.
Before that, I used WordPerfect and what a wonderful program it was! I recall using WordPerfect to write and design one lovely graphical document in particular that earned
me an A+ in class. WordPerfect was so easy and powerful, with virtually no hassles—just gratification. Is it better to have loved (WordPerfect) and lost, than to have never loved at all?
Unfortunately, since all my clients use Word, I have to as well. Frankly, and I hope this isn’t against board rules, I am merely speaking the truth as I see it—Microsoft
Word is an utterly wretched application that has caused me untold grief and aggravation. Bulleting, text boxes, fickle fonts, the list is very, very long …. But it only gets worse!!!
The whole .doc .vs
docx is a complete debacle; the “Compatibility Pack” is a cruel joke. If I use Word 2000 on .docx documents, here are some of the inconveniences and frustrations that I encounter:
Bulleting function grayed out
Spelling errors not highlighted
Additional linespaces introduced into printed documents
Mysterious transposition of bold, italics and underlining
Inability to work with text boxes (“Error! Reference source not found!”)
Track Changes not accurately recorded
These are not incidental issues. I’m a spelling bee champion, but unless the spelling highlight function works, I am bound to have a typo or two in a 20-page document.
This affects the quality of my work and my livelihood.
To make matters worse, my Windows 7 often won’t find .docx documents. If I had worked on a .docx document something four months that I recall included the word
“Rumplestiltskin,” the Windows 7 Find function should locate it, but it does not.
I could go on and on. How about the dismal wireless connectivity in Window 7, vs. XP, which was virtually flawless. But I’m trying to catch up on the 15 hours that I lost yesterday thanks to Microsoft’s
awful Outlook troubleshooting and upgrade functionality. -
I cannot open archieved pst file in outlook 2010, can someone help me
Сan some one help me to open my pst file which I had cut copied while moving on to new Laptop, now I cannot open this file in outlook 2010. I tried repairing the file using scanpst and other demo version from kernel and other software... most of them say
"not a valid pst file" Please help me as the date in this pst is important.Your PST file might have got corrupt or damaged with 'Cut Copied' , that's why you are not able to access it on your new Laptop. Could you let me know how did you export your PST file from your old laptop/system?
A valid way to Export PST file is by using Import & Export option in Outlook (Open Outlook -> File Tab -> Click Options -> Click Advanced -> Import & Export) . Once you export the PST file on your old computer, copy that PST file into
any external storage drive(or by any other medium) and transfer it to your new laptop. Now open Outlook and Create a new profile ( Click the Show Profiles button -> Click
Add to create a new profile -> Enter a name for your profile -> Enter Name, Email id & Password -> Click 'Manually configure server settings' box to get into More Settings and
customize the Outgoing server settings.) Once you are done with this, Import that PST into Outlook using Import & Export wizard. -
Is there any Exchange API support exporting .edb file to .pst file.
Hi
I'm working on a feasibility study of Exchange single mailbox/item recovery for our product. I find that there are some third part software can extract items from .edb file , and export specific items to .pst file. But there is not public
Exchange SDK about this functionality. So I want to know is there any special API be provided for third part partener about this extract .edb file? if not, are there any another way to implement this functionality?To recover your EDB file you must need a 3rd party Exchange Server Recovery Software. For your convenience you can read this tutorial about EDB Recovery. visit
http://www.edbtopsttutorial.net -
Search indexing not working in Outlook PST files
My boss recently got Office 2010 on his new laptop. I copied his PST's from his old laptop whihc had Office 2003 on it to the new one and added them to his profile. They are there and look to be workign fine, until you try any sort of search
on them.
If I am looking at the eMails in the PST and I see a whole lot from
[email protected] and then in the search box I type
[email protected] the emails are all firltered away and I am told that there are no items that match the criteria. This also happens when I try try to run an advanced search.
So according to this post,
http://social.technet.microsoft.com/Forums/en/outlook/thread/b1859770-dfb5-4224-995f-be828bd21333, I disabled Indexing of outlook, then search stops working on my default location, i.e. if I search my inbox or anything in that datafile, I get
no results returned, but if I search one of the archieve PST files for say
[email protected] the search runs for ages with out retunring any results, if I stop the search and then rerun it then I get results.
It just seems a bit strange that I have to choose iether or.
Please help ASAP as my boss leave tomorrrow on a trip to Australia and I would like to get this sorted out be fore he leave.
Regards
A user needs the admin password like nitro glycerine needs a good shake.This seems to be an ongoing problem. The instant search feature in Outlook 2010 is not working correctly for a large number of users. I have read many, many posts here in TechNet and many more that come up with a Google search. None of the solutions provided
are permanently solving the problem.
I have tried every potential solution I have found:
Rebuilding the index did not work
The registry key(s) PrevenIndexingOutlook, PreventIndexingEmailAttachments, did not exist (the Search Key did not exist). I tried adding both keys in 2 different suggested locations (HKCU and HKLM) Search indexing did not work with or without those keys
added.
I have tried everything that I have found everwhere to resolve this problem. I found one solution that appeared to work a month or so ago. Unfortunately, I cannot find it again and no new emails have been added to the index since that day (09/15/2010).
I tried rebuilding the index (again). This process has removed all of the emails from the index that had been there after I applied the fix that seemed to work. I am continuing to research this problem in the hope that I will find that previous partial solution.
It would be nice to get some feedback from Microsoft to let us know if this problem is being looked into. All of the solutions provided from Microsoft on these forums have failed to correct this long term problem.
FYI: I am running Windows 7 Ultimate (64 bit) and Office Professional Plus 2010. These were fresh installs, not upgrades. After installation the instant search feature in Outlook was working, I do not know exactly when it stopped working. -
Why are missing items when import pst files to Outlook 2011 for mac?
Hello.
After installing Office 2011 for Mac I configured Outlook and it was allright.
But when I tried to import a pst file from the old laptop who has Office 2007, I found that in the Outlook 2011 Inbox I have only ~60% items comparative with the Outlook 2007 Inbox.
From Microsoft Office forums I've got an answer that there are indeed some reports with missing items when import pst in Outlook 2011 but the solution they gave me (create folders in Inbox before import) doesn't work.
Do you know something about this kind of problems?
Is it a feature in Outlook 2011 which automaticaly select/delete/combine items based on the similarity between them or based something else?
Have you an ideea how to finally use this macbook and in the same time all my old emails?
Thanks.Hi Steve,
Thanks for this-yes, eventually, I do send/receive fine, once I've poppedd my passwords in.
I think you are right in that BT seem to be having unique server/login issues...at least this is what I've read elsewhere too.
Iroonically, this AM I opened my new Mac and have *not* been asked for passwords so perhaps the changes I made in the settings yesterday (keychain reset in Mac) and also changing it from smtp.....to mail.btinternet.com solved the issue...who knows? All I know is this last week I've nearly lost the will to live on more than one occasion, from the transition from PC Windows Live Mail to Outlook for Mac. -
Root Password Recovery Question
Hello all,
I have a question regarding root password recovery in Solaris 10.
The Server is a Sun Fire T1000; it has no CD-Rom drive, as well as no USB ports. One of our data architects who is the main user of this server has locked himself out of root (he also never created any other user accounts).
Now I know normally for root password recovery you use the solaris cd to boot into single user mode to take care of this but that's not an option currently. I was wondering if there is a way to put the hard drive as a slave in another Sun Fire T1000 server and then mount it and modify the shadow file removing the encrypted password. I've done this in other Linux OS's and it has worked but I didn't know about Solaris.
Any help would be greatly appreciated as it is for a project my company is working on and they have a presentation coming up in around 4-5 weeks.
Thank you!
-MikeWell I tried making the locked out hard drive a slave on another server of the same type. But I couldn't seem to mount it, I even tried the "touch /reconfigure; init 6" to reconfigure devices but it just didn't seem to find it. I tried mounting everything in /dev/dsk but nothing was successful.
Anyone have any other suggestions on commands that might work?
I put a purchase order in for a USB to SATA converter, and got a hold of a different Sun server which has USB ports but no SATA, only IDE. As soon as I get it i'm going to try to mount it like a USB external hard drive. I believe when mounting USB it doesn't care if it's a jump drive or a external hard drive it should still mount it correctly. Hopefully this will allow me to modify the shadow file.
Thanks in advance if anyone has any other suggestions. -
Enable password recovery in cisco 2950 with AAA
Hello friends,
I need to reccover switch enable password, i have already configured AAA also, when i am tryig to follow below proceedure finally saying Authorization failed. how can i recover enable password,
Regards,
Haris
If I try to recover password like this description says
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_25_see/configuration/guide/swtrbl.html#wp1090048
Step 1 Connect a terminal or PC with terminal-emulation software to the switch console port.
Step 2 Set the line speed on the emulation software to 9600 baud.
Step 3 Power off the switch. Reconnect the power cord to the switch and, within 15 seconds, press the Mode button while the System LED is still flashing green.
Base ethernet MAC Address: 00:0x:xx:xx:xx:xx
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch:
Step 4 switch: flash_init
Initializing Flash...
flashfs[0]: 600 files, 19 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 7713792
flashfs[0]: Bytes available: 24800256
flashfs[0]: flashfs fsck took 10 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
Setting console baud rate to 9600...
Step5 switch:load_helper
Step6 switch: dir flash:
Directory of flash:/
2 -rwx 916 <date> vlan.dat
5 drwx 192 <date> c2960-lanbase-mz.122-25.SEE1
620 -rwx 5488 <date> config.text
621 -rwx 5 <date> private-config.text
24800256 bytes available (7713792 bytes used)
Step7 switch: rename flash:config.text flash:config.text.old
Step8 switch: boot
Loading "flash:c2960-lanbase-mz.122-25.SEE1/c2960-lanbase-mz.122-25.SEE1.bin"...
Initializing flashfs...
flashfs[1]: 600 files, 19 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32514048
flashfs[1]: Bytes used: 7713792
flashfs[1]: Bytes available: 24800256
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:0x:xx:xx:xx:xx
Motherboard assembly number : xxxxxxxxxx
Power supply part number : xxxxxxxxxxx
Motherboard serial number : xxxxxxxxxxx
Power supply serial number : xxxxxxxxxxx
Model revision number : B0
Motherboard revision number : B0
Model number : WS-C2960G-24TC-L
System serial number : xxxxxxxxxxxx
Top Assembly Part Number : xxxxxxxxxxxx
Top Assembly Revision Number : B0
Version ID : V02
CLEI Code Number : xxxxxxxxxxxxx
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
* 1 24 WS-C2960G-24TC-L 12.2(25)SEE1 C2960-LANBASE-M
Press RETURN to get started!
Step9 Hit <Enter>
Would you like to terminate autoinstall? [yes]: yes
Step10
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]no
Switch>
Step11 Switch> enable
Step12 Switch# rename flash:config.text.old flash:config.text
Destination filename [config.text]? <Enter>
Step13 Switch# copy flash:config.text system:running-config
Destination filename [running-config]?<Enter>
5488 bytes copied in 0.940 secs (5838 bytes/sec)
Step14 NewSwitchName#conf t
% Authorization failed.
Doesn't this procedure work any more ?The password recovery worked, but you copied your problematic config back to the switch. Skip Step 13 and paste only the working part of the config to the switch.
You can see your renamed config with "more flash:config.text.old". -
Export a mail as PST file using EWS API
Hi,
I need to export the Exchange mails to PST file without installing the outlook. To acheive this i am choosing the EWS API. but i dont know how to do that. So, now i have a two questions, the first one, is it possible to create the pst file using EWS API?.
If yes, how to create a pst file using EWS, if any one posted the sample code here, it is very helpful for me.
Thanks,
RamMohanEWS is not going to help you do what your trying to do, EWS is an Exchange API so you need to have an Exchange 2007 server or greater with the MailStore mounted to even use it to access the Mailbox . EWS also doesn't support exporting email to a PST because
the PST file is an Office file format so in the case where you do manage to mount the database on Exchange then use Adam's suggestion or just connect via Outlook and export the Mailbox.
>> I am parsing the mails from the exchange EDB files
With what ? reading the contents of an EDB file directly is not supported although there are a few third party apps that can do it and if your using one of those apps then all of them I've seen support the export to PST (unless your using a Trial licence).
The correct method of recovering data from an EDB file would be to use a Recovery Database
https://technet.microsoft.com/en-us/library/dd876954(v=exchg.150).aspx even if you don't have access to the environment you should be able to setup a temp environment using Virtual machines and recover it that way.
Cheers
Glen -
How to repair a .pst file?
Hello,
My colleague's Outlook pst file is corrupted and the file size is more than 17 GB. Scanpst.exe and PST Recovery Software could not recover the file. Is there any other way to repair it?
Best Regards,
Ammar WasifThe only two ways to repair corrupt .pst files are: SCANPST.EXE and a third-party PST recovery software.
I suggest to read the given blog on WordPress:
How to deal with a corrupt PST file of MS Outlook?
By reading this blog, you'll come to know how to use SCANPST.EXE to fix corrupt .pst files. Other than SCANPST.EXE there is one more solution to repair corrupt .pst files, which is PST repair software. You can search some advanced third-party PST repair
or recovery software.
Thanks. -
6509 - 720 Supervisor Module Failure after Password Recovery
Hi,
I attempted to perform a password recovery on a 6509 with dual WS-SUP720-3B modules running 12.2(33)SXI2A.
After changing the configuration register to 0x2142 and booting, I am getting a major error on the supervisor modules. I've changed the configuration register back to 0x2102 and am still getting the same error on both supervisor modules. I've also tried it with one module removed and one module installed.
I have about 30 seconds in where I can run commands before I get booted to rommon.
Any thoughts?
See below for the console output:
System Bootstrap, Version 8.5(3)
Copyright (c) 1994-2008 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
Autoboot executing command: "boot bootdisk:"
Initializing ATA monitor library...
string is bootdisk:s72033-ipservicesk9-mz.122-33.SXI2a.bin
Loading image, please wait ...
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ################################################################################################################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x4224F120
*Apr 19 05:03:02.747: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Apr 19 05:03:01.515: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch
Firmware compiled 19-May-09 12:08 by apyu Build [25600]
*Apr 19 05:03:02.747: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 524288 Kbytes of main memory
Download Start
Download Completed! Booting the image.
Self decompressing the image : ############################################################################################################################################################################################################################################################################################################################ [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x43A51E70
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C6509-E (R7000) processor (revision 1.5) with 458720K/65536K bytes of memory.
Processor board ID SMC133600GT
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 Virtual Ethernet interface
194 Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
*Apr 19 04:55:51.335: RP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:52.107: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:56:00.531: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c)
Router> 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
*Apr 19 05:03:03.111: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Apr 19 04:55:46.739: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:55:46.747: SP: SP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:47.483: %SCHED-SP-7-WAen
Router#TCH: Attempt to set uninitialized watched boolean (address 0). -Process= "<interrupt level>", ipl= 1, pid= 3
-Traceback= 408E0820 40D74FEC 40D4B31C 40D4A1A8 40D46448 40F604B8 4173CCDC
*Apr 19 04:55:59.607: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Router#
Router#Apr 19 04:56:00.591: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Apr 19 04:56:00.695: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Apr 19 04:56:00.943: %OIR-SP-6-INSPS: Power supply inserted in slot 2
Router#
Router#
Router#
*Apr 19 04:56:08.099: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
*Apr 19 04:56:08.195: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
Router#
Router#
Router#
*Apr 19 04:56:09.567: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
Router#
Router#
Router#
Router#show diagnostic result
% Incomplete command.
Router#show diagnostic result ?
module Module Keyword
Router#show diagnostic result ,modu modjle ule 5
Current bootup diagnostic level: minimal
Module 5: Supervisor Engine 720 (Active) SerialNo : SAL1338YTZ0
Overall Diagnostic Result for Module 5 : UNTESTED
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) TestScratchRegister -------------> U
2) TestSPRPInbandPing --------------> U
3) TestTransceiverIntegrity:
Port 1 2
U U
4) TestActiveToStandbyLoopback:
Port 1 2
--More-- U U
5) TestLoopback:
Port 1 2
6) TestNewIndexLearn ---------------> .
7) TestDontConditionalLearn --------> .
8) TestBadBpduTrap -----------------> .
9) TestMatchCapture ----------------> .
10) TestProtocolMatchChannel --------> .
11) TestFibDevices ------------------> F
12) TestIPv4FibShortcut -------------> F
13) TestL3Capture2 ------------------> F
14) TestIPv6FibShortcut -------------> F
15) TestMPLSFibShortcut -------------> F
16) TestNATFibShortcut --------------> F
17) TestAclPermit -------------------> F
18) TestAclDeny ---------------------> U
--More-- 19) TestQoSTcam ---------------------> U
20) TestL3VlanMet -------------------> U
21) TestIngressSpan -----------------> U
22) TestEgressSpan ------------------> U
23) TestNetflowInlineRewrite:
Port 1 2
U U
24) TestFabricSnakeForward ----------> U
25) TestFabricSnakeBackward ---------> U
26) TestTrafficStress ---------------> U
27) TestFibTcamSSRAM ----------------> U
28) TestAsicMemory ------------------> U
29) TestAclQosTcam ------------------> U
30) TestNetflowTcam -----------------> U
31) ScheduleSwitchover --------------> U
32) TestFirmwareDiagStatus ----------> U
33) TestAsicSync --------------------> U
34) TestUnusedPortLoopback:
--More--
Router#[Ashow diagnostic result module 5
Current bootup diagnostic level: minimal
Module 5: Supervisor Engine 720 (Active) SerialNo : SAL1338YTZ0
Overall Diagnostic Result for Module 5 : UNTESTED
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) TestScratchRegister -------------> U
2) TestSPRPInbandPing --------------> U
3) TestTransceiverIntegrity:
Port 1 2
U U
4) TestActiveToStandbyLoopback:
Port 1 2
--More--
Router#
*Apr 19 04:56:29.637: %DIAG-SP-3-MAJOR: M
%Software-forced reload
04:56:30 UTC Sun Apr 19 2015: Breakpoint exception, CPU signal 23, PC = 0x42735338
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
-Traceback= 42735338 42732E8C 423A6220 423A624C 421C1388 4223F614 4223F670 40962164 40963034 40962F54 40963D28 423259D0 42319604 42319820 42727FEC
$0 : 00000000, AT : 43FE0000, v0 : 45870000, v1 : 00000200
a0 : 46DC99C0, a1 : 44E05758, a2 : 00000000, a3 : 00000040
t0 : 00000010, t1 : 3400F101, t2 : 3400F100, t3 : FFFF00FF
t4 : 42728608, t5 : 00002F04, t6 : 80000000, t7 : 00000000
s0 : 00000000, s1 : 43EE0000, s2 : 50449158, s3 : 0000001F
s4 : 50449158, s5 : 470B3AB4, s6 : 00000000, s7 : 08A5DFC8
t8 : 08028FEC, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 43FDDE8C, sp : 5000DBB0, s8 : 00000000, ra : 42732E8C
EPC : 42735338, ErrorEPC : 870FDDF0, SREG : 3400F103
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
DATA_START : 0x43A51E70
Cause 00000824 (Code 0x9): Breakpoint exception
Writing crashinfo to bootflash:crashinfo_20150419-045630
=== Flushing messages (04:56:30 UTC Sun Apr 19 2015) ===
Buffered messages:
*Apr 19 04:55:51.335: RP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:52.107: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:56:00.531: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
*Apr 19 05:03:03.111: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Apr 19 04:55:46.739: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:55:46.747: SP: SP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:47.483: %SCHED-SP-7-WATCH: Attempt to set uninitialized watched boolean (address 0). -Process= "<interrupt level>", ipl= 1, pid= 3
-Traceback= 408E0820 40D74FEC 40D4B31C 40D4A1A8 40D46448 40F604B8 4173CCDC
*Apr 19 04:55:59.607: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
*Apr 19 04:56:00.591: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Apr 19 04:56:00.695: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Apr 19 04:56:00.943: %OIR-SP-6-INSPS: Power supply inserted in slot 2
*Apr 19 04:56:08.099: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
*Apr 19 04:56:08.195: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
*Apr 19 04:56:09.567: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
*Apr 19 04:56:29.637: %DIAG-SP-3-MAJOR: Module 5: Online Diagnostics detected a Major Error. Please use 'show diagnostic result <target>' to see test results.
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestFibDevices failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestIPv4FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestL3Capture2 failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestIPv6FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestMPLSFibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestNATFibShortcut failed
Queued messages:
*Apr 19 04:56:33.583: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
IPv6FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestMPLSFibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestNATFibShortcut failed
*Apr 19 04:56:29.971: %HA_EM-6-LOG: Mandatory.go_bootup.tcl: GOLD EEM TCL policy for boot up diagnostic
*Apr 19 04:56:30.575: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to exception , reset by [5/0]
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x45876f54
PC = 0x42728664, SP = 0x43ed9cd8, RA = 0x413ad2f4
Cause Reg = 0x00003820, Status Reg = 0x34008002
rommon 1 >What kind of line card was being inserted in slot 6? Have you tried other slots? The crash file in the RP says it was reset by SP, so the important crashinfo file would be in the sup-bootflash: Try an see if you find any "dir sup-bootflash:"
Aug 5 17:46:11: %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP
%Software-forced reload
To answer your question:
A Is there any different procedure to install line modules in supervisor slots?
>>No there are no special configuration you need to do when inserting a line card in slots that normally would be for supervisor.
B Switch is having previously removed linecard (i.e, fastethernet module)in running configuration. Will it create any system crash?
>>No, it will not cause the switch to crash, when you see the configuration of a line card even after it was removed is quite normal, it's cold module provisionsing, you would not want to keep putting in a configuration for any line card after just resetaing them do you?
Maybe you are looking for
-
Printing Adobe Form in Webdynpro
Hi Experts, I need one help from all of you , its quite urgent. Actually I am trying to print Adobe form in webdynpro method like below: "----- Take the Adobe fprm -------------------" lv_form_name = 'ZHR_SAP_FORM'. CALL FUNCTION 'FP_
-
How to fetch images stored in database to reports
i have stored images in bfile type.i need to access the image.pls do inform me urgently.
-
When students login & upload images onto a client, they have to return to that same client. They cannot see their images if they log into another client the next day. Currently, I created uses as Local only on a server dns of ---- .server.private. vi
-
What is the average duration of 1 full SAP life cycle or 1 end-to-end implementation. How long does it take to prepare DEV, QAS and PRD in any company?
-
I have seen one of my iPhoto slideshows on my iPad so I know it is there. It was put together in iPhoto with music and I THOUGHT I viewed it in my video app. I cannot find anything in my video app now except two purchased videos. I have the latest