PSU application question

I just applied PSU #3 to Oracle 10.2.0.4
I followed all of the steps including the post installation steps which included the bouncing of the database several times, startup upgrade and running several scruipts and recompiling.
when I do opatch lsinventory I get
Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
Shouldn't it say 10.2.0.4.3 ?
I want to verify that I installed the PSU correct.

Shouldn't it say 10.2.0.4.3 ? No, it has already been asked many time over here. You could read the following MOS note as well :
Does PSU Released For Oracle 10gR2 (10.2.0.4)and 11g R1 (11.10.7) Change The Database Version/Fifth Digit ? ID 861152.1+
You could see the fifth digit in sys.history$registry table for the PSU you were appliying.
Nicolas.

Similar Messages

Simple java/mysql database application question about triggers

I am planning a new database application using java and mysql. I may want to use some triggers to automatically update the tables when a change is made. my question is this: If I write the trigger, and I use Java to modify the database, will java automatically pause and let the trigger finish doing its task before it continues? what if it writes more to the table before the trigger is finished modifying the table? how do I get java to pause and let the trigger finish?
thanks for your response

lduren wrote:
I am planning a new database application using java and mysql. I may want to use some triggers to automatically update the tables when a change is made. my question is this: If I write the trigger, and I use Java to modify the database, will java automatically pause and let the trigger finish doing its task before it continues? what if it writes more to the table before the trigger is finished modifying the table? how do I get java to pause and let the trigger finish?
It doesn't have anything to do with java at that point.
When you execute, for example, an insert statement, then the database executes that statement. The database (not java, not the driver) decides with that statement is complete. Control returns to java when the database decides that execution is complete.
And except for tricks that one might do (or attempt to do) via SQL or triggers then when the statement execution finishes then everthing has completed running.

MacBook & Windows applications question..

Hello,
I have been a PC user all of my life but I am very seriously considering purchasing a MacBook 13 inch. I will mostly be using the laptop for MS Office and for web browsing, and I know that Office is available for Macs nowadays. However, there are one or two applications I will need to use.
My question, and I am sure you all have heard this many times before: What exactly do I need to purchase/download to do this? I had read that most people use something called Virtual PC, but have read that that program does not work with the Intel Macs...the new Touche commercial though says something about a program called Parallels? I haven't been able to find much info on that though...
My understanding is that I would have to purchase both Windows XP AND Parallels...
1) Is this correct?
2) Where do I find Parallels / cost?
3) Does this work on the Intel MacBook 13 inch laptops?
4) Will just about any Windows application work assuming the specs matchup?
Thanks for any help anyone can give me!!
-T

I have always been a PC user, too, and I have now had my 13"macbook for six days. In addition, I am absolutely no techie, just an average user. I chose parallels after trying boot camp because 1) I can switch back and forth without shutting down; and 2) in parallels I can set up a 2-finger tap right click which is similar to what I'm used to, while in boot camp I had to remember some fancy sequence thing.
It's been absolutely great, I'm thrilled to death with my switch, but it has been far from problem-free and I have even occasionally reached the point where I wanted to fling the macbook from the balcony. But I restrained myself, and after 6 days of 12-hour a day frustration learning a new system, I think I absolutely have the best of both worlds. Already, I'm spending more time on the mac side, with only a few programs left exclusively on the windows side, and I love this machine more than any VAIO I've owned before.
I would say DEFINITELY do it, but remember that you're a bleeding edge pioneer here, especially if you intend to continue to spend time in windows, which most mac users disdain, and it may take a bit of time and patience before everything works the way you want it to. But when it does -- it's quite a rush!!
In conclusion, do it, decide if you want to use boot camp or parallels to run your windows from (there's plenty of discussion of this on the internet), then steel yourself to learn mac OS, and retreat into your windows when it gets too difficult. If you enjoy a challenge, you like to learn new things, and you want a computer that can do what no other can do, you will love this. If you just want something to work seamlessly in the way you are used to doing, then why are you even considering a mac?

BI Applications Questions

(Sorry for double posting...but I just noticed this group and thought I'd repost my questions here.)
Our company has recently purchased OBIEE and we're contemplating on whether or not to purchase the BI Applications (latest version). I have a couple of questions regarding these BI Applications.
1. Does anyone actually purchase the BI Applications?
2. Of those who purchased the BI Apps...do you actually use them? I've heard people buy them and really don't use them after awhile.
3. Did you find yourself heavily customizing the BI Apps?
4. It appears that the Sales and Marketing BI Apps pull data from Siebel systems, do you know if future versions (possibly for 11g) will pull from Oracle EBS instead?
5. Is there a planned upgrade for BI Apps, for 11g? Does anyone know if Informatica will be replaced by ODI in the future BI Apps versions?
6. (Not really a BI question) Does anyone use ODI for building their data warehouse/mart? I have heard mixed reviews. If not ODI, what tool(s)?
Thanks, any information the community can provide will help us make better decisions.
Thanks

4. It appears that the Sales and Marketing BI Apps pull data from Siebel systems, do you know if future versions (possibly for 11g) will pull from Oracle EBS instead?
First do not confuse OBIEE version (10g or 11g with BI apps 7.9.6.x). Right now if you need Sales and Marketing related analytics you can extend / customize OBIA to pull
data from relevant EBS side tables. May be in future there may be OBIA for EBS but keep in mind usually people do not use EBS for Sales and Mkt mainly, they use CRM (like Oracle CRM on demand, Siebel CRM, SalesForce.com etc). So you need ot ask why do you need OBIA for Mkt and Sales pointing to EBS if you are not using EBS for that.
5. Is there a planned upgrade for BI Apps, for 11g? Does anyone know if Informatica will be replaced by ODI in the future BI Apps versions?
There is limited use OBIA using ODI, 7.9.5.2 and seemingly there is ODI on the roadmap, but how long that will take to replace Informatica, can't tell.
OBIEE 11g will b supported with BI apps

ATX PSU conversion question

Hello,
I'm converting an ATX PSU for use on a Sawtooth. The PSU I have is 20 + 4 pin type. So the 4 pin part is discarded on a Sawtooth. Anyway, my question is: can I use the 3v(Orange) line from the discarded 4 pin part, and move it over to pin 8, instead of soldering a nearby 3v line onto the pin 8 line? I'm thinking I can just remove the 3v. orange line from the discarded 4 pin part, install a new pin, and insert it into the pin 8 slot on the motherboard connector.
Thanks,
medinaray

This link shows the differences in the ATX & Sawtooth power supply pins/voltages
http://atxg4.com/sawtooth.html
You can buy an adapter cable so that no wire cutting/soldering is necessary.
 Cheers, Tom

Standalone application questions

Hi,
Question 1:
I have a data acquisition application using Labview. Four analog channels are recorded on HDD and displayed on waveform chart continuously.
Development application runs fine but standalone application on DELL laptop has problems: waveform does not show proper Grids; sometimes vertical and horizontal grid lines are broken. There is no problem recording data but only problem is displaying waveform.
The same standalone application used to run without any problem but after some minor modification, it behaves strange.
Any suggestions to fix the waveform display problems will be greatly appreciated.
Question 2:
�VI Property > Customize Windows Appearance > Show abort button� unchecked will disappear ABORT
button from VI. .After standalone application compilation and installation, the ABORT button was visible. How hide the ABORT button on the standalone application.
Question 3:
Can I replace Labview default RUN button with custom button, I want to hide Labview default RUN button and want to make a separate RUN button. Can I access property node or local variable of that RUN button?
Thanks in advance,
Kishor

About question 1.
I had some strange behaviour with charts and transparent backgrounds.
Perhaps it's something like this...
About question 2.
Perhaps you have made a build script that has the properties set. After
changing the VI, loading the build script might overwrite the VI settings.
About question 3.
You should modify the VI to wait for a button to be pressed (a while, 10 MS
wait, and a button). Let the VI start automatically (run when opened). This
has the same effect.
Regards,
Wiebe.
"Jeremy Braden" wrote in message
news:[email protected]..
> 1. The VI may have been corrupted after your minor changes. Do you
> have an old copy of the good code. You can also copy the block
> diagram of th
e bad VI to a new VI and build an executable from the new
> VI. Also do you see the same behavior with the classic waveform
> chart? What happens if you build a new LV executable with dummy
> information going to the chart?
> 2. The tests I ran showed that you can make the abort button
> invisible with the steps you mentioned. Do you think that you may
> have not saved your changes?
> 3. You cannot replace the run arrow. Atleast not from a nice
> integrated published solution sort of way. There are no properties
> for the run arrow.

Starting Photoshop application question

Hi Ive just started the 30 day trial in photoshop and this may sound like a silly question but how do you get into the actual application?

Can you at the very least tell us your platform, Mac or Win, and the version of Photoshop you downloaded?
You need to extract the download, install the application and launch it. In order to guide you, a lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Some rate application questions

Hi,
how does the maths for currency translation process work? is it naturally assumed that all the rates is between USD and every other currencies within the rate application?
within the rate application, there is a dimension called 'ratesrc', and there are 2 members that come with the Apshell application set, i.e. "rateinput" and "ratecalc". What is the difference between them? i was looking through some material for cpm320, and it seemed that after changing from "rateinput" to "ratecalc", some rates change while some remain the same, why is that?
and within a normal finance application, would there be a case where rptcurrency = USD is used along with an entity where its currency is not USD? if it's possible, what does that mean?
thanks for your help in advance.
cheers

You don't need to use USD as your triangulation currency, and in terms of the math itself, the logic doesn't require that you use any specific triangulation currency that has a rate of 1.
As a practical matter, though, it is definitely the best way to set things up. If your accounting / finance/ treasury people prefer to use EUR or something else as the triangulation currency, that is perfectly OK. Set the AVG and END rates for this inputcurrency = 1, and express all the other inputcurrency rates in relation to this triangulation currency.
The RateInput/RateCalc setup of RateSrc is left over from an earlier Outlooksoft setup of the rate application. This allowed you to input rates as, for example, units of USD per 1 GBP (to RateInput), and then the system would invert it to GBP : USD (in RateCalc) by dividing "1 / rate". But for other currencies you would enter JPY : 1 USD, and it would not divide 1 by the rate. There was also a property InputCurrency.MD that was driving the default logic in the rate app, which did this division for you. Look at the default logic in the training appset's rate application; it should have something like
*WHEN InputCurrency.MD
*IS D
// do some division
*IS M
// just copy it from RateInput to RateCacl
(It's possible I have the M and D backwards, so look carefully at your own setup.) If you don't need that logic, then either comment it out of the Rate app, or set the InputCurrency.MD property so that it gives you the correct results.
The ApShell setup has slowly moved away from this in the SPRUNCONVERT / SPRUNCONSO buinsess rules (although it still can be done, if you need really need to). Normally, I would just set up one member GLOBAL in the RateSrc (sometimes people call it RateEntity), and express all rates as units of the source currency per 1 unit of the triangulation currency. Accountants who are responsible for currency rates administration are usually pretty good at math, and can divide 1 by a number, so they can get used to it. And of course, in a report, you can flip it around if you want to show it the way people are used to seeing it.
Also, the other reason that the RateSrc dimension is there in the Rate app is because, quite simply, every BPC application must have an entity-type dimension.
I don't quite understand your last question -- but I think this is a very standard case, where the entity's local currency is, let's say Thai baht, and we convert it into a RptCurrency of USD, so we can compare it against all the other entities in a common (group reporting) currency.
As for what does it mean, that all depends on what the business's reporting requirements are. But I suspect your question is something different?
Regards,
Tim

Web Applications questions

          Hi,
          I read through the Web Application documentation and I could not find answers to some questions, so I thought that someone on these forums might be able to help.
          1) Can two or more web applications share code? Or, in other words, can a web application use classes that do not belong to it? If yes, where should these classes reside?
          I tried sharing the code to get a database connection and the Class.forName("weblogic.jdbc.pool.Driver") instruction fails with the error ClassNotFoundException: weblogic/jdbc/pool/Driver.
          2) Can two web applications cooperate? Or, in other words, can one web application use services provided by another web application (like servlets, .jsp pages, images, etc.)?
          I tried linking to a servlet in a web application from another web application and got the error NoClassDefFoundError: javax/servlet/http/HttpServletRequest.
          3) If two web applications can cooperate, can they still cooperate if they reside on two different machines? Or even two different clusters?
          Thanks,
          Vladimir


          Alexander Petrushko <[email protected]> wrote:
          >vladimir wrote:
          >
          >> Hi,
          >>
          >> I read through the Web Application documentation and I could not find answers to some questions, so I thought that someone on these forums might be able to help.
          >>
          >> 1) Can two or more web applications share code? Or, in other words, can a web application use classes that do not belong to it? If yes, where should these classes reside?
          >
          >> I tried sharing the code to get a database connection and the Class.forName("weblogic.jdbc.pool.Driver") instruction fails with the error ClassNotFoundException: weblogic/jdbc/pool/Driver.
          >
          >Set your weblogic.class.path correctly and it will work. Look at the shell/bat scripts supplied with the server distribution.
          >
          >> 2) Can two web applications cooperate? Or, in other words, can one web application use services provided by another web application (like servlets, .jsp pages, images, etc.)?
          >
          >Yes, use RequestDispatcher and the correct path.
          >
          >> I tried linking to a servlet in a web application from another web application and got the error NoClassDefFoundError: javax/servlet/http/HttpServletRequest.
          >
          >That's a CLASSPATH/weblogic.class.path issue.
          >
          >> 3) If two web applications can cooperate, can they still cooperate if they reside on two different machines? Or even two different clusters?
          >
          >If webapps A and B are on different machines (VMs), your webapp A can use sendRedirect() to have the client go to webapp B or read B's output stream and proxy it back to the client. Look at
          >java.net.HttpURLConnection if you want to use the latter method. Your webapp A would be no different from the browser or any other HTTP client when talking to webapp B.
          >
          if you go from webapp A to webappB, how do you maintain session state (without saving it in a database) ?
          >Cheers,
          >
          >Alex
          >

Basic Java Card/Card reader application question...

Hello all,
I have a basic question regarding java card applications. Do you always require a host application(on some PC/workstation server) to send and receive data from the java card (through the card reader using any of the available interfaces like OCF etc) or can you have a stand alone card reader application that interacts with java cards inserted into the reader?
For example..in a mass transit application, you have a reader that reads an e-purse smart card that is swiped and does the necessary deduction of the fare from the card. In this case, where does the host application reside (there is no other host system involved other than the reader here? ) How is this done? Does the card reader carry the necessary code to interact with cards?
Any information is greatly appreciated.
Thanks for the time.
Regards,
Ajay

Documentation is provided by the terminal vendors. Just think of it like this, there are drivers that read the card, but don't know what to do with the data without some form of middleware to process it.

K8N Neo Pl - PSU RAILS question

Hi guys,
I have two supplies and want to know to use for my PC (K8N Neo Platinum with AMD64 3000+). I have read around that the Wattage is not a true indication of a good PSU, so I am not using this reading. I have read the Current (Amps) values from both PSUs, but they present the info in different ways. Add to this the fact that I have no idea about PSUs, then it leaves me with much to learn
PSU 1 reads:
+3.3V
28A
+5V
38A
+12V
17A
-12V
0.8A
-5V
0.5A
[/list]
Whilst PSU 2 is a little more confusing. It has two current readings - one is Peak and the other Max:
+3.3V
Peak=30A
Max=18A
+5V
Peak=40A
Max=30A
+12V
Peak=20A
Max=16A
-12V
Peak=1.0A
Max=0.5A
-5V
Peak=1.0A
Max=0.5A
[/list]
Can anyone help me understand the following:
[list=1]
For PSU 2, which reading should I take - peak or max?
Which of the 2 PSUs is better (I guess this depends on the answer to question 1 above)?
What is the meaning of the different rails?
How close to these values should the PSU stay?[/list=1]
Thanks in advance for any help

this is the most common question here on the forum it seems
lots of info on it here
a quick search will pull up hundreds of threads on psu`s
psu2 states max continuous at 16a 12v peak is 20a 12v
meaning it will spike to 20a but will only hold 16 for any length of time...
psu1 who knows weather it is max peak or continuous amps at those voltages !
whatever they both seem very weak on the +12v rail which "could and prob will" present problems with a amd64 system.
ok suggestions ( single rail )
pc power and cooling ( see sig)
ocz
enermax
tagen
all got good reps here

Some applications question

i using iphone 4s and upgrade IOS7 last night, today i happen to open some of my games apps, such as injustice, infinity blade, infinity blade 2, asphalt 7, asphalt 8, blood and glory Legend, etc. all of my apps able to load at my current gameplay status except blood and glory legend which this game start from stratch, everything i have in this game just gone! I did backup my iphone to itunes before upgrade to IOS7 and now i planning restore back from itunes.
However i faced several problem,
1) i unable to restore this particular blood & glory legend game from itunes, as i know itunes can only perform full restore.
2) When i wanted to restore from itunes, it mention my iphone not enough space. Is it this mean i need to delete everything in my iphone and than only can check restore?
3) What worries me is that after i fully restore from itunes, some of my apps will be start from zero.(example, the game i mention above, before restore only bllod and glory legend save file gone, but after restore from itunes maybe infinity blade 2 save file gone)
As i didn't perform 'restore from itunes' before, i worry it will affect my games save files. i almost perform full backup every night. Could anyone tell me what should i do? Thanks for reading(sorry for poor english).
Last thing, usually restore from itunes will take how long?

Question marks on Dock icons indicates a hosed Launch Services database. Delete the current icons and replace them with ones from the apps. Launch the Terminal app in /Applications/Utilities/, copy & paste this one-liner into the window that pops up, hit the return key, quit Terminal, and restart:
*/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user*

K330 Graphics card and PSU change question

I know there are posts about this but mine is a slight variation of them for I have no knowledge about hardware and have never even changed a part. I apologize if this is a noob question
I bought a K330 desktop a year and a half ago and now I want a better graphics card. I am thinking of getting a GTX760. My question is: is this graphics card compatible? Will it fit inside? I read that theK330 has a smaller frame. The dimensions are 8.6" x 5" x 1.5"
I understand I will need to install a new PSU as well and I have read online that it is possible as long as I don’t need the front LED to work, which is fine. Any suggestions regarding this are greatly appreciated.
Thank you for your time.

not sure about the size but, when adding a gfx card to a k330 check the internet and see if anyone has used your gfx card (the one you pick) and got it to work
Thx dave
yoga 2, lenovo b540
3 custom gaming pc systems

Aggregating Applications Question for my Business...

Hello, I am new to the iPhone application world, so any help/information that you can offer is greatly appreciated. I am looking to take several of the top applications in a category and combine them by creating one launcher app. My questions are as follows:
1. Is it possible to combine the compiled binary files for each app, and create a launcher app that installs all of the separate programs. This assumes that the developers of each app are willing to sell/license me their binary files. Or, do I need to get the source code to make my launcher application?
2. Will Apple approve of my launcher application?
If anyone out there has an answer to my question, please let me know. Thanks in advance for your help.

No. Developers are not going to do that, and apple is not going to approve such an application.
You can however use the new feature of folders in iOS 4 to place multiple app icons(up to 12) into one placeholder on the homescreen in order to organize certain apps more efficiently.
You can see how folders works/looks like at this link.
http://www.apple.com/ipodtouch/ios4-software-update.html

Sorting out ASM PSU application

Oracle db 11.2.0.1.0 SE-One
Oracle ASM 11.2.0.2.0
Oracle Linux 5.6 64-bit
Single instance db. No RAC.
The system I have inherited (which is my first ASM system) is configured as above. I would like to upgrade everythinig to 11.2.0.3.
It appears that there is one single 112.0.3.0 PSU, which includes both database and grid infrastructure. Looking at the installation guides that come with it, the db installation guide (E24321-06) has a section on ASM and GI. There is also a seperate installation guide (E22489-03) for the GI. The second is bulked up with a lot of stuff pertaining to RAC, which I don't care about, but it is sometimes hard to seperate the two. Both guides talk a spend a lot of time on things that would apply to an initial install and getting asm configured in the first place. I'm having a hard time parsing out what needs to be done just to upgrade an existing asm instance to a new PSU.
Note that I don't have RAC, I'm only upgrading from 11.2.0.2 to 11.2.0.3 -- not a major upgrade like 10.x to 11.x
I certainly don't mind re-reading the docs yet again, but I fear I'm getting to where I can't see the forest for the trees.
Any pointers would be appreciated.

Dude wrote:
It's all there. Check the following link:
http://docs.oracle.com/cd/E11882_01/server.112/e23633/upgrade.htm#CHDHIIHD
OK, I think I'm closing in on it. I really like the out-of-place patch, but the docs are really leaving something to be desired. Maybe in my old age my brain isn't as sharp as it once was, or maybe I'm just less tolerant of docs that send you on a rabbit hunt. And I realize I used the term PSU inappropriately for what I am looking for.
After looking more carefully I realized I had glossed over the details I was looking for becuase they were under section headers that led me to believe I wasn't interested in that particular content - like single sentence saying to use OUI for an ASM upgrade -- under a section on using asmca....
In any event, I built a sandbox under VBox, installed ASM 11.2.0.1 and database 11.2.0.1, had them working, then used the OUI that came with the patchset for ASM. It was actually pretty painless, with the biggest issue being that the rootupgrade.sh script twice appeard to have hung. A couple of steps took 5-10 minutes each but when I was patient, it eventually finished and my asm instance was running under 11.2.0.3.0. Trying to de-install the old 11.2.0.1 home is another adventure!
Thanks for helping me get back on track.

PSU application question

Similar Messages

Maybe you are looking for