PSUS4 - problem with windows7

Question

I am receiving the following print port setup error when trying to connect – AddPort Fail.I have a home network using a Linksys wag354G router , I am using the print server with a canon MP610 printer , two laptops with XP, one with vista & a new one with win7. The XP’s work fine, the Vista & win 7 recognise the printer, but tell me it’s off line when trying to print a test page.Any ideas please!
(Mod Note: Edited due to formatting concern.)

Answer 1

I have the same problem I found the solution
1/Setup your PSUS4 with a fixe IP
2/install you printer divers on the client
3/setup the printer port manualy
Open Control Panel in WIndows 7 and open the "Printers" folder. Right click on the "Printer Name" and click on Properties and below you need to click on "Add Port" and click on Next and in the next screen, click on "Create a new port". At the "Type of Port" prompt, use the drop-down and select "Standard TCP/IP Port" and click next.
Under "Device Type" use the drop-down and select "TCP/IP device". The Hostname or IP address for this device will be the address assigned in the Protocol tab on the administration web page. Click the box that will allow the O/S to query the printer for the appropriate driver and click "Next".
The "Additional Port Inforrmation" screen should open. Click on "Custom" and then "Settings". Protocol = LPR and LPR settings are: Queue Name = LP1 and check on "LPR Byte Counting Enabled". Leave "SNMP Status Enabled" unchecked. Click Ok