PSV2 - Not cancelling Attendance after Booking has been cancelled PD - PT

Hi,
I hope that you can assist me. We have got Integratino turned on between PD & PT and the attendance codes for going on a course are set up in SEMIN APART.
If you book a person the code is created correctly in the Time module, but if you cancel the booking the attendance isn't cancelled in Time. Can anyone assist me with this?
Regards,
Francois

Hi,
I hope someone can help,
It seems that a Full load only brings in records with a status of 30
A delta load, however brings in status 60 records with a negative quantity.
This leads to inconsistent data.
So for example, if there are 2 records in CATSDB for a person for a date, one has status 30, and a quantity of 8
and there is another record with status 60 and quantity of 8
If I do a full load, i get a quantity of 8 (the status 30 records)
However, if there was one record already in BW for that person and for that date and a delta is loaded containing the same employee, i get a reversed quantity (-8) so the total in BW is now 0.
Is this correct?
It seems a full load, which gives a quantity of 8 is correct or is the total of 0 correct?

Similar Messages

Changes made in Book Module do not "stick" when the book has been duplicated

Lr 5.2 stand-alone version (not CC) – Win 7 64-bit
I had made a duplicate of the book (right-click the book Collection and select <Duplicate>). Then I made changes to the original book – changed the font for captions and for body; changed the wording of the body text; changed the padding for images. At some point in the process these changes did not '”stick” anymore. The changes were visible as long as I worked in the Book Module. But the changes were gone and the book reverted to the previous state as soon as I went to the Library and back to the Book Module. Same thing happened when I closed Lr and re-opened it.
Replacing the Preference File did not change this behavior. But when I deleted the duplicate book the behavior of Lr went back to “normal”, i.e. the changes now “stick”.
In my opinion there must be a bug that prevents that changes “stick” when after a Duplicate of a book has been created.

You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
Do you have the latest patches?
When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
Good luck!

Modifications to a jsp file not getting loaded after it has been served out once

Hi,
I am using Weblogic 6.1 on solaris platform.
I have created a new managed server under the default domain. A new
default web application was created with a DefaultWebApp directory which
acts as the default directory for JSP files for this server.
problem 1:
In this new server if i make changes to a jsp file which has been served out
once, the modifications are not reflected until and unless i restart the
server.
problem 2:
If I start the server and after that I add a JSP file to the DefaultWebApp
directory, if I try to access it it gives a 404 error which is file not
found.
These problems do not occur in the original server which got created when i
did the installation.
Can someone help me out please.
Pankaj

Hi.
On reflection I believe this is normal behavior for WLS 6.x. In order to see
changes to jsps (or other elements in the webapp) you need to either
undeploy/redeploy the webapp via the console or the command line utility, or you
can use the refresh utility if your webapp is deployed in the exploded directory
format (ie not a war file).
For docs on redeploying and refreshing from the command line see:
http://e-docs.bea.com/wls/docs61/webapp/deployment.html
Regards,
Michael
Pankaj Bansal wrote:
yes we installed SP2 for weblogic 6.1....
the OS is Solaris ver 2.8
any suggestions on what can i do apart from opening a case with support?
Pankaj
"Michael Young" <[email protected]> wrote in message
news:[email protected]..
Hi.
Are you running with service pack 2? If not please try this. If youstill see
this with sp2 then please open a case with support.
Thanks,
Michael
Pankaj Bansal wrote:
Hi,
I am using Weblogic 6.1 on solaris platform.
I have created a new managed server under the default domain. A new
default web application was created with a DefaultWebApp directory which
acts as the default directory for JSP files for this server.
problem 1:
In this new server if i make changes to a jsp file which has been served
out
once, the modifications are not reflected until and unless i restart the
server.
problem 2:
If I start the server and after that I add a JSP file to theDefaultWebApp
directory, if I try to access it it gives a 404 error which is file not
found.
These problems do not occur in the original server which got createdwhen i
did the installation.
Can someone help me out please.
Pankaj--
Michael Young
Developer Relations Engineer
BEA Support
Michael Young
Developer Relations Engineer
BEA Support

Downpayment is not clearing even after invoice has been fully paid

Good day to everyone,
I am currently having an issue with a down payment not clearing even though the invoice has been fully paid. to my understanding, once the order is fully invoiced- down payments should be cleared as well, am i correct?
The order related billing's status containing the down payment is set to "fully invoiced", yet when i view the document flow containing the down payment, it states "not cleared". What could be the problem? Could i just manually release the down payment? thanks in advance!

hi
if you are doing vendor manual payment program then you clear down payment as below.
T-Code-F-44 Clear down payment
Select special gl indicator
then press enter and clear down payment against invoice.

Helix not waking properly after lid has been shut

I have a few Helix and they are all having this problem.
If you shut the lid and then open it the screen will stay black. You then have to shut the lid a second time and reopen for the screen to power on.
If you open the lid very slowly it powers on 100% of the time, when you open it quickly the screen powers on 50% of the time. When the screen doesn't turn on you can press the power button and it will turn on but it should be turning on whenever the dock is opened.
I have updated the BIOS and the Firmware each to version 1.14, and the issue persists.
Anyone else seeing this issue or know a resolution/workaround?

The issue occurs when:
You shut the lid the causing the Helix to sleep
If you reopen the lid before the red light in the ThinkPad logo (on the back of the Helix) has a chance to turn off that is when the issue occurs.
At times it takes up to approx. 8 seconds for the light to dim, if the lid is reopened during that time the screen stays black.
When this occurs, closing and reopening will get the screen to come back on, pressing the power button only works after the light on the back of the Helix has gone out.

This book has been returned. Loan not on record

I've used Adobe Dig Ed on a Windows XP computer for years with no problems. I recently switched over to Windows 8.1, and reinstalled Adobe DE, and went through the authorization step for the computer. Then I downloaded two books from the library, and read them with no problems. However, the next time I tried I ran into problems. I am able to download the books to Adobe DE. I can open the books in Adobe DE (but it would be tough to read in ADE on the computer, because of no formating). I can copy the books to my nook, the same way I always have, and they show up in my nook. But when I try to open in Nook, I get "Error dialog - This book has been returned. Loan not on record".
I turned off Virus protection and tried again, with same results.
Any help?

Worked like a charm!!
- Uninstalled 4.0, Installed 3.0.
- De-authorized ADE, removed borrowed book from library (not returned, just remove!).
- Re-authorize ADE, re-add book (no need to download again, just add already downloaded file) and move it to Nook.
- Enjoy reading!
So happy!!

TS1702 I just had to restore my iPhone. After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback. They are stuck on "Waiting" and I cannot open or delete them. HELP, please!!!

I just had to restore my iPhone. After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback. They are stuck on "Waiting" and I cannot open or delete them. HELP, please!!!

I just had to restore my iPhone. After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback. They are stuck on "Waiting" and I cannot open or delete them. HELP, please!!!

My computer does not eject the disc after it has been burned.

I understand that my computer is supposed to automatically eject a disc after it has been burned. Mine doesn't. Instead, I hear a "Plonk," which I assume is announcing that the burning process has been completed.
First of all, is it true that the disc is supposed to be ejected after the burn has been completed? Secondly, how can I restore that function?

Diane Wordsmith wrote:
To clarify...are you importing songs from a CD into iTunes, or are you burning songs from iTunes onto a blank CD? If it's the former, iTunes won't eject it...you'll just hear a chime or noise when it's done. If it's the latter it should eject.
For the second poster, it sounds you are importing. In which case, you will just hear the sound when importing is finished and you eject the CD yourself.
Just to make sure that I understand you correctly, here's what I did: Imported songs from website. They were in RealPlayer format. I then converted the song files into MP3 format, and put them into my iTunes music library. Finally, I put the songs in a New Smart Playlist, and burned them into a blank disc.
Given this situation, should I expect the disc to automatically eject when the burning is competed? If so, what do I have to do to get it to work properly?

I want to make some changes in my book after it has been published

I think I have been quite clear with my intentions with the name of my thread:)
My books has been published, but I want to add some screencaptures to it. I have the screencaptures, but will I have to wait a few days while Apple checks my updated package, or will they just publish the captures without kepping the book from distribution during their check?

You don't tell it to read specific lines. You pick out specific columns. Based on your input file one simple way to do this is to use the Read From Spreadsheet File VI to read in your source files. Read the files as string rather than numeric. Chop off the first 15 or 16 lines (up to the start of tabular data) and convert the rest using the Numeric -> String functions to get a 2D array of numbers. You can display the resultant 2D array on the front panel and provide controls (e.g., an array of Booleans) to select which columns to keep. The lines you chopped off at the beginning can be reconstituted into your new header (a 1D array of strings, where each element is a line of your header). You can then use the Write to Spreadsheet File VI to write out your header (feed it the 1D array of strings which are your header lines), and then the new 2D array that constists of only the columns you want.

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

How do i get back my stateful session bean after it has been passivated

hi ,
How do i get back my stateful session bean after it has been passivated by container.
i'm confused that is it possible or not .......give me answer
i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
java.rmi.NoSuchObjectException: no such object in table
java.rmi.NoSuchObjectException: no such object in table
     at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
     at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
     at sun.rmi.server.UnicastRef.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
     at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
     at $Proxy1.makeNewAcc(Unknown Source)
     at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or not

Stateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
Chuck

How to settle the expenses after AUC has been capitalised.

Hi All,
I have a understanding that after AUC has been settled, we can edit the settlement rule in WBS element and settle directly to the capitalised assets.
I can not see the settlement rule but investment profile since the project being a Capital comes from Investment measure and automatically created.
Can you tell me how to create a new settlement rule in this case. It is Urgent
Regards
VK

Hi Vijay,
This requires a change in the settlement rule since the AUC is no more and it must be the settlement reveiver earlier which should be changed to the main asset after capitalisation.
Please go to Transaction code CJ20N, select the WBS and go to settlement rule via edit > Cost and set the receiver as the fixed assets itself instead of AUCV since AUC has been transferred to main assets.
You can then settle using CJ8G or CJ88 but CJ88 is a better option.
I think, I have answered the same query.
Regards
Bharat

After Firefox has been running a while, every link opens a new window

After Firefox has been running for a while, every link starts opening in a new window. Until today, if I closed Firefox and restarted it, it would stop happening ... until it started happening again. Then today, I closed it down and restarted it, and it was STILL happening. So either I find a solution, or I stop using Firefox on my Mac.
This is a vanilla installation - both for the Mac and Firefox. I don't use the Mac as my main computer. The Mac is running OS X 10.5 8. The problem has existed through many upgrades of Firefox. I always upgrade as requested. This last time, however may have been the killer. A new upgrade was installed right before the problem became unfixable by shutting down and restarting. I'm running Firefox 15.0. I just rebooted, however, and now (for now), it's working properly.
I have no add-ons installed in Firefox.
My only plug-ins are iPhotoPhotocast, QuickTime, SharePoint, and Shockwave Flash.
I've seen multiple reports of this problem on this Web site, but no solutions. Just a generic recommendation to disable add-ons to see which one is conflicting. But I'm running no add-ons. I think there's a bug in Firefox.

If it were an extension or theme or a Mac driver, wouldn't it cause the problem consistently? This only happens after Firefox has been running for a while. I'm using Firefox to type this reply right now, and the problem is not happening.
And it's not because I suddenly start using some offending software. As I said, I don't use the Mac as my main computer. Usually I'll have been using my PC, I'll go back to the Mac to check my email on Firefox, and suddenly the link problem is happening. I only use the Mac to check email on the server before I download it with Outlook (on the PC) so I can delete spam on the server first.

Tiles- Cannot forward after response has been committed Error

I am trying to use following approach for my tiles implementation but i am getting error like
java.lang.IllegalStateException: Cannot forward after response has been committed.
I have gone thorugh the other posts regarding the same error but not helping me.
Any clues greatly appreciated.
Thanks,
Sachin
"I haven't found a way to directly dispatch to a tiles definition, but you can eliminate the need for multiple "wrapper" JSPs by creating a single "tilesDispatch" JSP that is able to dispatch to different tiles definitions, and establishing a convention for mapping URLs to that JSP, and identifying the tiles definition you want to load.
For example, you could use the following convention to identify a tiles definition:
/tiles/defName
where "defName" is the name of the tiles definition (from tiles.xml) that you want to use. The code for the tilesDispatch.jsp would be as follows:
<%@ page contentType="text/html;charset=UTF-8" language="java" %>
<%@ taglib prefix="t" uri="http://jakarta.apache.org/struts/tags-tiles" %>
<%
String tilePath = request.getRequestURI();
int slashIndex = tilePath.lastIndexOf('/');
if (slashIndex >= 0) {
tilePath = tilePath.substring(slashIndex+1);
%>
<t:insert definition="<%=tilePath%>" flush="false"/>
The scriptlet code takes the request URL (e.g. /tiles/defName), strips off everything up to and including the final slash (e.g. defName), then the tiles "t:insert" tag is used to look up and insert the corresponding tiles definition.
In order to map all URLs of the form /tiles/* to the tilesDispatch.jsp, you would need to add the following to your web.xml:
<servlet>
<servlet-name>tilesDispatch</servlet-name>
<jsp-file>tilesDispatch.jsp</jsp-file>
</servlet>
<servlet-mapping>
<servlet-name>tilesDispatch</servlet-name>
<url-pattern>/tiles/*</url-pattern>
</servlet-mapping>
Note: You may need to insert a slash before tilesDispatch.jsp in the <jsp-file> element. I am using pre-compiled JSPs, so my configuration is a little different. So if <jsp-file>tilesDispatch.jsp</jsp-file> doesn't work, try <jsp-file>/tilesDispatch.jsp</jsp-file>.
Once you have this set up, you can refer to tiles definitions using the /tiles/defName convention in your faces-config.xml. For example, if you have two tiles definitions in your tiles.xml file: tile1 and tile2, you could have something like the following in faces-config.xml:
<navigation-rule>
<from-view-id>/tiles/tile1</from-view-id>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/tiles/tile2</to-view-id>
</navigation-case>
</navigation-rule>
Note that when I have used this convention, I also have used the prefix mapping for JSF. That is, when linking to a JSF page, based on a tiles definition, from a non-JSF page, the URL would be as follows:
/faces/tiles/defName
In this case, the Faces servlet is initially invoked, which sets up the JSF environment. Then the /faces prefix is stripped off, and the remaining URL (/tiles/defName) is routed to the tilesDispatch.jsp, which strips off the /tiles/ prefix, and inserts the "defName" definition.
We are currently using this approach in a number of web apps, and it is working very reliably. I hope this helps.

Hi gimbal2,
I hope to better explain.
In my JSF code I have the next:
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:rich="http://richfaces.org/rich"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:fn="http://java.sun.com/jsp/jstl/functions">
     <h:body>
          <ui:composition template="/template.xhtml">
               <ui:define name="page">
                    <h:head>
                         <h:outputStylesheet ...
                    </h:head>
                    <h:form id="form1">
                         <rich:dataTable      id="table"
                                        value="#{listBeanRequest.elements}"
                                        var="element">
     </h:body>
</html>
In the listBeanRequest class, the method getElements() has a line, Integer h = Integer.valueOf("a");, which efforts the java.lang.NumberFormatException
An in my web.xml I have:
<filter>
     <filter-name>SecurityFilter</filter-name>
     <filter-class>my.filter.SecurityFilter</filter-class>
</filter>
I'm using JSF 1.2 running on Apache Tomcat 6

Workflow Shows as 'In Progress' after Workflow has been completed.

Hello All,
I have created a custom workflow using SharePoint Designer. Within this workflow I have multiple 'approval process' tasks. In theory this was so that once the first user had approved the item then the next would be prompted to approve the item, and
so on. The users that the item must be approved by are set when the item is submitted initially.
Just so anyone reading this knows I have no formal experience/education in SharePoint workflow design, but I would like to think I know my way around SharePoint(in general) at this point.
My problem is, the company I work for is just starting out using SharePoint workflows, and from what I understand workflows that are 'In Progress' are related to server performance. I noticed today that there are 5 items in the list which
under the 'workflow status' column display that they are 'In Progress' which is entirely correct. However, when I go to -> 'List Settings' -> 'Workflow Settings' this workflow is showing 8 workflows 'In Progress'.
Thank you to anyone who is able to help me with this,
James

Hi,
According to your post, my understanding is that workflow shows as 'In Progress' after Workflow has been completed.
To send the task one by one, you can select one at a time(serial) when you select Task Process Participants.
Per my knowleadge, when you go to -> 'List Settings' -> 'Workflow Settings', it show all the workflows you associated to the list.
To see the running workflow, you need to select an item, right click the title, and then select the workflow.
However, each workflow enstance can only start once on an item. In other word, you can not start the same workflow again untill the previous one is completed.
As you said, workflow shows as 'In Progress'.
Please make sure all the users have approved the tasks.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

PSV2 - Not cancelling Attendance after Booking has been cancelled PD - PT

Similar Messages

Maybe you are looking for