PSVB Condition In Repair Order Pricing shows Zero Value

As per Flow for repair order.
I have initially made Repair Order then Service order wrt to Repair Order.
But when I check PSVB condition it doesnt show Cost from service order.
I mean if cost in service order is 100 $
Then in Reapir Prder Pricing PSVB should show 100 $ but rt now it is showing 0 value.

Pritesh kumar
Check your settings in TCode ODP4 (IMG->Cost condition for sales document type)
PeteA

Similar Messages

Limit SC showing Zero value in report SC per cost centre in SRM portal

Hi SRM Gurus,
On executing SC per cost centre report avaialble in SRM 5.0 Portal I am getting value of limit SC as zero. while in all other follow on documents i.e. PO and Invoice its displaying the value.
Is it due to the fact the for Limit Items we don't have any GR/confirmation i.e zero quantity? and the value column field has Sigma symbol on it. so maybe it is multiplying quantity with the value here?
Is this SAP SRM standard for limit items to show zero value in this report ?
Please let me know. Thanks for the help.
Regards,
Varun Dhawan.

SRM experts please help in this regard. Any insights on LIMIT Shopping carts??

Excise invoice showing zero values

Hi all,
          In stock transfer from plant to depots, i have created excise invoice with reference to proforma invoice, but the excise values are not reflecting in excise invoice, i mean to say BED,ECESS ,SCESS are showing zero values....
regards,
ram

Hi lakshmipathi,
                         Its really gud to c u,
                   i have checked the settings as u said,all are perfect,
          onemore thing i wud like to inform u that while creating a sale from plant to customer, excise invoice is coming perfectly with reference to commercial invoice,
           while in stock transfer with reference to proforma excise invoice is not picking values.
regards,
ram

Withholding tax showing zero value in vendor line item display report

Hello Friends,
I have facing one strange issue in withholding tax, when im executing report of vendor line item display(fbl1n tcode) the column for withholding tax is showing zero value for some documents even though the tax is been deducted which is clearly visible in f-02 entry.
Kindly help me on this!
Regards,
Sunny

Hi,
1.Please check the WHT config has been done properly.
2.Check the vendor master and varify tax fields are filled up.
Regards

KKAO is showing ZERO value for all orders

Hello All Experts,
I am running a WIP report for Production Order via KKAO. I am getting "ZERO" values for all the orders available in system. All my orders are "Release (REL) and in "Partial Delivered (PDLV) status still I am getting ZERO values.
Please find below screen shot for reference :
Can experts guide on this why I am getting ZERO values here ? Guidance will be very helpful.
Thank you.
Regards,
Sharu.

Hello Rajnessh Sir,
Please find below screen shot :
OKG9 -
OKG3 -
I am really not sure what to check here, I am new to WIP area. Experts please guide. Is above said settings correct ?
Regards,
Sharu.

Invoice show zero value for service po

Hi all,
I have a service po with item catoegory B and account assignment K but when i do MIRO it does not shows the value of po simply says qty zero and value zero
any suggestion
Thanks

Hi,
In your PO have flagged service based IV in invoice item details. Please post the service entry sheet in ML81N accept and saved the entry sheet.
Then, system will automatically post the goods receipt posting for the service entry sheet.
Pleas echeck it PO -History before posting the invoice,
Now post the invoice then system allow to simulate the invoice for the service PO.
With Kind Regards,
Thiru

Showing Zero values in columns and rows in BW report

Hi,
the BW report is showing all rows and columns all Zero's..... so what does it mean till target the data is fine but in the report it is showing 'zero' in all fields.... so let me know the reason...
Regards
vishali

Can you please check the Key figures value? Is it Zero or as per the selection/filter the values are coming "Zero".

How do i show zero values in a SVG chart ?

Hello All,
APEX version 2.0
I am sure there is an easy way, but could not find it in this forum.
I basically have three series in a SVG line Chart
I want to show a value or zero value on a month where no data is returned.
SELECT NULL LINK,
TO_CHAR (DATE_CLOSED, 'MON-YY') label,
COUNT(PRIORITY_OPTION) Value
from "TW_OPERATIONS_VIC"."TW_WSF_MAIN"
WHERE DATE_CLOSED IS NOT NULL AND PRIORITY_OPTION = 'Low'
GROUP BY TO_CHAR (DATE_CLOSED, 'MM-YY'),TO_CHAR (DATE_CLOSED, 'MON-YY')
The tables consists of the following
ID-------------Priority-----Closed_Date
Rec 1--------Low----------01/07/07
Rec 2--------Low----------01/08/07
Rec 3--------Medium----01/07/07
Rec 4--------Medium----01/08/07
Rec 5--------High---------01/09/07
Rec 6--------Medium----01/09/07
I want to show a line graph with three series
Months shown will be July, Aug & Sep
Values in Jul & Aug for High should show 0
Value in Sep for Low should show 0
Unfortunately the graph tend to show only the months relating to the first series
ie if Medium is the first series then Jul , Aug & Sep is shown with data from the other series not shown in the correct columns.
Hope I explained properly
Frank

Hello Denes,
Thankyou for replying to my question.
I went to your impressive website and viewed your examples.
They deffinetly appear to suit my needs, but alas my SQL skills are not at a level where I can easily convert your example to my needs.
I have tried to convert the example, but as yet I am not getting the correct data results.
thankyou again
frank

Query output in APD shows zero values

Hi ,
I am using query output in APD . The query has got some calculated key figures for which the output result of the query in APD shows zero .Is there any way to resolve this .
regards,

Hi,
You need to store the source key figure value in a separate variable lets say v1 then **** the new variable v1 value to circular right, then remove the gaps, and then again shift V1 right by deleting trailing spaces and then finally copy the value in V1 to source or target key figure.
Hope this helps.
- Kiran

Showing Zero values in OLAP Pivot Table for Excel 2007

Hello,
I needed a help to a problem. Is it possible to show the values with No sales in an Olap Pivot Table ??
I have a sales Cube, and brwsing it via excel i wanted to filter on a Product Category and see how many products in this category had made no Sales. By default the Pivot table doesn't shows the empty values, so if i check the Showm empty rows option for
Pivot Tables, i see the whole of the products populated with and without sales, and i can't filter further. Is there a way i can only get those which have no sales.
Vinish Viswanathan

Happy Holidays,
I can slice on product categories in Excel 2013 with these settings for the Pivot Table:
Activate "Show items with no data for rows and columns"
Apply a value filter that says that the measure should filter on values = 0
Have the product natural hierarchy on rows with levels product category->subcategory->product.
Expand the levels below product category
Use the product category attribute and not the hierarchy as the filter.
I do not have Excel 2007 installed anymore.
HTH
Thomas Ivarsson

Do Not Show Zero Value In A Chart

I am using Apex 3.2.
I have a bar chart with several series.
Each series has a date group.
Here is an example of a series
SELECT NULL LINK,
TO_CHAR(SUP_AUDIT_SQL_ARCHIVE.SESSION_STARTTIME, 'DD/MM/YYYY') LABEL,
            sum(SUP_AUDIT_SQL_ARCHIVE.SQL_EXECUTIONS) Under_30_Minutes
       FROM SUP_AUDIT_SQL_ARCHIVE
where round((SUP_AUDIT_SQL_ARCHIVE.SESSION_ENDTIME - SUP_AUDIT_SQL_ARCHIVE.SESSION_STARTTIME) * 1440) > 10
and round((SUP_AUDIT_SQL_ARCHIVE.SESSION_ENDTIME - SUP_AUDIT_SQL_ARCHIVE.SESSION_STARTTIME) * 1440) <= 30
and TO_CHAR(SUP_AUDIT_SQL_ARCHIVE.SESSION_STARTTIME, 'DD/MM/YYYY') >= '01/01/2012'
group by TO_CHAR(SUP_AUDIT_SQL_ARCHIVE.SESSION_STARTTIME, 'DD/MM/YYYY')
order by TO_CHAR(SUP_AUDIT_SQL_ARCHIVE.SESSION_STARTTIME, 'DD/MM/YYYY')At the moment a value appears in my chart, if the above returns 0.
How do I stop this.
Cheers
Gus

Hi Rod
Nice to speak to you.
I am now working in the private sector in Germany.
Oh, the code did not work.
When I run my code in Toad, I don't get the zero's, only in the chart
Gus

Showing zero values in crosstab report

Hello.
I have a crosstab report (in desktop) that is used as a raw data extract to populate an excel spreadsheet.
In order for this to work without having to adjust the spreadsheet every time the columns have to be the same, each time it's exported across.
However, when a particular column doesn't have any data for that month Discoverer doesn't show it, which means the columns that go across to excel are in a different order and the formulas are out of sync.
I'm sure I've come across a setting to show all columns, including those with no data, but I can't find it and I'm starting to think I imagined it?
Thanks in advance

Hi,
I'm sure I've come across a setting to show all columnswhat you described is no settings issue.
its the data you have or actually don't have.
the cross tab is dynamic display so that if you do not have data in the database it will not be displayed.
however you can manipulate the table by adding dummy records to your table so that you will still see it,
for example if you want to see a record for Jan-12 then add a dummy record for this month with every other columns as NULL or 0 (depends on your business logic).
Tamir

2D Column Flash Chart - Series Showing Zero Values in Chart

Hi,
I have created a 2D Column Flash Chart - with 6 series with different coloring of bars..I have obtained the result as I wanted.
Now the problem is the distance between one series to another series is filled up with value 0.
Anybody please help me remove the 0 value in chart which is coming between series.
Thanks
JP

Hello,
I guess you must have data that reflect the 0 value, no?
In your query can you do WHERE value <> 0, so they don't get taken into account or is it the purpose to keep them in?
Thanks.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/

Duplication of condition in sale order

Hi,
In our sale order,in item condition,JIN6 condition is duplicated.
Though the cond.is duplicated,but on cond. shows zero value.It has no inpact on calculation.
But we need to remove that condition.
As we've checked that there is no duplicate cond.record maintain.
Pricing procedure is correct.
Pls help to resolve this issue
Harsh

Hi,
please go through the below thread it will help you to resolve your issue.
duplication of pr00 in sales order
Hope this will help you !!!
Regards,
Krishna O

Value of NET in Sales order (Pricing)

Hi,
I have created a Price correction order. Where I put the corrected price and all the calculations happen on the entered corrected price. Like the discounts and taxes.
All the calculations in the Pricing is perfect.
But the value in Net for the line item is calculating incorrect value.
For e.g. If Corrected price is 100 and the Net value for this is 60 (including discounts and taxes). Then the value in Net in the Sales order will show the Value (100 + 60) = 160.
All the calculations in the Pricing procedure are perfect.
Please help me with this issue, How the value is NET (Sales order item) is calulated. Is this associated with any routine.
Thanks and regards,
Sheetal

I don't think Net price is supposed to include taxes...
As suggested, check your calculations. Also once I tracked down a similar problem to a programming error in a custom VOFM routine. You might want to look into that as well.

PSVB Condition In Repair Order Pricing shows Zero Value

Similar Messages

Maybe you are looking for