Psvccrt_retail.msi not available in OVM templates

Hi All,
I am new to PeopleSoft. I installed Peoplesoft instance using OVM for FSCM 9.1 (shipped with PT 8.51.07). I am able to bring up the Database OVM as well as the PIA-AppBatch OVM.
As the per the installation guide to use Application Designer I should copy /opt/oracle/psft/pt/tools/toolsclient.zip from PIA-AppBatch virtual machine to a Windows machine. After copying toolsclient.zip when i launch pside.exe it gives me below error
"The Application has failed to start because the application configuration is incorrect. Reinstalling the application may fix the problem."
When i search for this issue I came to know via MOS article 950813.1 that I need to run psvccrt_retail.msi from PS_HOME\setup\psvccrt.
But in my PIA-AppBatch Linux virtual machine there is no folder psvccrt in PS_HOME\setup. Does this mean i need to install PeopleSoft Enterprise PeopleTools 8.51 on my Windows machine.
Please guide.
Regards,
Vishal.

Old thread, but maybe out of interest to read more :
Do we need have a code to install the virtual image for peoplesoft image(HCM,FSCM,CRM or CS Suite)
Nicolas.

Similar Messages

Latest Flash player MSI not available yet?

I deploy Flash Player using a script to around 200 corporate users using the MSI located at http://www.adobe.com/products/flashplayer/fp_distribution3.html - however users are now getting the 'install Flash player' message indicating it's upgrade time - but the latest version (Flash10l.ocx) doesn't seem to be available on that page as an MSI. Am I looking in the wrong place, or has Adobe just not uploaded it yet? Thanks in advance.

Hello again, let's hope you don't have problems as the last time:-) Here is what I see on that website you linked to:
Flash Player 10.1
Operating System
Browsers
Languages
Installers
Windows
Internet Explorer
All supported languages
Download EXE Installer
Download MSI Installer
Sorry for the large image, just the way it came out!!
Hope this helps and I hope you are not getting a notice to Update from 10.1.102.64 which is the latest released version.
Thanks,
eidnolb

Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

Hi Folks,
I was trying to save basic search template master page "seattle.master" after making change to the template.
I have added just "CompanyName" folder and update the line below in seattle.master.
Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
When I save it, and refresh page on browser, it shows "Something went wrong" error.
ULS says the following error : "UserAgent not Available, file operation may not be optimized"
Pls let us know if there is a solution.
Any help Much appreciated !
Thanks,
Sal

Hi Salman,
Thanks for posting this issue,
Just remove this below given tag and check out. It might be happened that your control is conflicting with others.
Also, browse the below mentioned URL for more details
http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

OVM 3.3.1: NFS storage is not available during repository creation

Hi, I have OVM Manager running on a separate machines managing 3 servers running OVM server in a server pool. One of the server also exports a NFS share that all other machines are able to mount and read/write to. I want to use this NFS share to create a OVM repository but so far unable to get it to work.
From this first screen shot we can see that the NFS file system was successfully added under storage tab and refreshed.
https://www.dropbox.com/s/fyscj2oynud542k/Screenshot%202014-10-11%2013.40.00.png?dl=0
But its is not available when adding a repository as shown below. What can I did to make it show up here.
https://www.dropbox.com/s/id1eey08cdbajsg/Screenshot%202014-10-11%2013.40.19.png?dl=0
No luck with CLI either. Any thoughts?
OVM> create repository name=myrepo fileSystem="share:/" sharepath=myrepo - Configurable attribute by this name can't be found.
== NFS file system refreshed via CLI ===
OVM> refresh fileServer name=share
Command: refresh fileServer name=share
Status: Success
Time: 2014-10-11 13:28:14,811 PDT
JobId: 1413059293069
== file system info
OVM> show fileServer name=share
Command: show fileServer name=share
Status: Success
Time: 2014-10-11 13:28:28,770 PDT
Data:
FileSystem 1 = ff5d21be-906d-4388-98a2-08cb9ac59b43 [share]
FileServer Type = Network
Storage Plug-in = oracle.generic.NFSPlugin.GenericNFSPlugin (1.1.0) [Oracle Generic Network File System]
Access Host = 1.2.3.4
Admin Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 2 = 44:45:4c:4c:47:00:10:31:80:51:b8:c0:4f:35:48:31 [dev2]
Refresh Server 3 = 44:45:4c:4c:33:00:10:34:80:38:c4:c0:4f:53:4b:31 [dev3]
UniformExports = Yes
Id = 0004fb0000090000fb2cf8ac1968505e [share]
Name = share
Description = NFS exported /dev/sda1 (427GB) on dev1
Locked = false
== version details ==
OVM server:3.3.1-1065
Agent Version:3.3.1-276.el6.7Kernel Release:3.8.13-26.4.2.el6uek.x86_64
Oracle VM Manager
Version: 3.3.1.1065
Build: 20140619_1065

Actually, OVM, as is with all virtualization servers, is usually only the head on a comprehensive infrastructure. OVM seems quite easy from the start, but I'd suggest, that you at least skim trough the admin manual, to get some understanding of the conecpts behind it. OVS thus usually only provides the CPU horse power, but not the storage, unless you only want to setup a single-server setup. If you plan on having a real multi-server setup, then you will need shared storage.
The shared storage for the server pool, as well as the storage repository can be served from the same NFS server without issues. If you want to have a little testbed, then NFS is for you. It lacks some features that OCFS2 benefits from, like thin provisioning, reflinks and sparse files.
If you want to remove the NFS storage, then you'll need to remove any remainders of any OVM object, like storage repositories or server pool filesystems. Unpresent and storage repo and delete it afterwards… Also, I hope that you didn't create the NFS export directly on the root of the drive, since OVM wants to remove any file on the NFS export and on any root of ony volume there's the lost-found folder, which OVM, naturally, can't remove. Getting rid of such a storage repo can be a bit daunting…
Cheers,
budy

I can't update or delete (to reinstall) iTunes. I get a message that "iTunes.msi" can't be found or is not available. It's there but may be corrupted? Any suggestions?

I can't update or delete (to reinstall) iTunes. I get a message that "iTunes.msi" can't be found or is not available. It's there but may be corrupted? Any suggestions?

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

Web service not available in F4 help of document template

Hi ,
I have created a web service using tool WS_DESIGN_TOOL. Its active and status is productive. Now when I am creating document template , I am not able to see this web service in F4. Hence not able to create document template with my web service.
I also tried by copying standard web service and then using it but even that web service is not available in F4.
Do we need to any additional steps so that web service appears in F4 help of document template.
Thanks,
Madhura

Hi,
The service is active in SICF or in SE80 under package $WS_BOL_GEN.
I have assigned Business Transaction . I have followed steps as per below thread.
[Re: CRM 7.0 Document templates;
Any more suggestions are welcome.
Thanks,
Madhura

Cluster Not Available error when booting OVM server DOM0 from USB

Hi all,
I have been wanting to run OVM 2.2 from a USB stick for a while now. I ran through the install CD today and saw there was a 'minimal USB install' option on the installation screen. So I plugged in a 4GB USB stick, rebooted, and ran the USB install.
After a while, the install completed, OVM booted up perfectly it seemed, and I was happy.
The server had no local storage apart from this USB stick as we are going to be hooking it up to an iSCSI target for guest VM storage.
This was a new lab setup, so I got the VM Manager running on another system, connected to the USB booted OVM server, and went to create a pool.
Running the 'test connection' that worked fine.
Trying to add the pool - failed. I got the error 'Cluster Not Available'
On the OVM server I did a repos.py -l and nothing gets listed.
I understand that for HA you need a repository with shared storage. However, before I have used these same install CDs with a singe local hard disk, to get OVM server running, and it did so fine.
So what's different with the USB disk install that means you don't get a repository?
Do I have to create a special repository LUN, manually connect the OVM server to this, and then use repos.py to create it?
Cheers,
Jeff

Ok I have read, re-read related parts of the underground manual and have hit a brick wall with the 'simple' task of setting up a NIC for dedicated iSCSI traffic. The manual does not cover this task in the iSCSI SAN section.
So I'm in a catch 22.
My OVM server boots up, with it's single management NIC configured, but once booted - I don't want to connect to the iSCSI target via this network - I need it completely closed off.
I want to use another NIC (or bond of two) for dedicated iSCSI traffic to and from the OVM Server.
However, the underground manual strangely only seems to cover a single NIC configuration! It looks like he assumes you are going to be running iSCSI on your management NIC, which I can only think is incredibly bad practice.
I have installed OVM with the linux asknetwork - this did not give me the option to configure additional interfaces.
I then manually edited /etc/sysconfig/network-scripts/ifcfg-eth1 on the OVMServer, restarted network, restarted the entire box - I can ping my new NIC / IP locally from within the OVM server, but I can not connect to the iSCSI target, nor can I ping the iSCSI NIC on the OVM server from the target.
This is such a simple thing to try to achieve - super frustrating...
Jeff

SAP templates use BAPIs not available in 4.7

We are trying to use the SAP module library templates for PP - We are running 4.7 and do not have access to BAPIs BAPI_PRODORD_GET_LIST or BAPI_PRODORD_GET_DETAIL, two of the BAPIs used in that template.
Any suggestions or help would be appreciated.
Thanks

If these BAPIs were not available in 4.7, then you would probably have to create them. But I was pretty sure the Production Order BAPIs were in existence then. You may want to post on a different board when some more savvy ECC folks would chime in. Are you sure you don't need the Process Order BAPIs? For BAPI_PROCORD_GET_LIST and its fellows were not released until ECC 5.5 (I think).
Regards and Good luck!
Mike

Business Intelligence Template not available

Hi,
I just upgraded a SP site from 2010 to 2013. And have turned on performance point services etc at both the site collection and site level. However, When I try to create a Business Intelligence subsite, that template is not available for me to select. Any
ideas of what I can do to fix this issue?
Sherazad

Verify if PerformancePoint is correctly associated with the web application. Refer to the following post for more information.
http://blogs.lessthandot.com/index.php/datamgmt/dbadmin/mssqlserveradmin/sharepoint-2013-bi-part-10/
http://sharepoint.stackexchange.com/questions/72176/where-can-i-found-and-how-can-i-configure-bi-center-site-collection-sharepoint-o
Cheers,

Ionic Side Menu Template - Javascript JavaScript runtime error: [$injector:nomod] Module 'ngLocale' is not available!

I am using VS 2013 ,CTP 3.1
When I tried to run the Ionic side menu template on Emulator 8.1, the javascript console shows below exception -
Exception was thrown at line 9576, column 11 in ms-appx://io.cordova.myapp8724a31325644ec29a8d2d88682b7987/www/lib/ionic/js/ionic.bundle.js
0x800a139e - JavaScript runtime error: [$injector:nomod] Module 'ngLocale' is not available! You either misspelled the module name or forgot to load it. If registering a module ensure that you specify the dependencies as the second argument.
http://errors.angularjs.org/1.3.6/$injector/nomod?p0=ngLocale
There was no code changes to any of the files.
Please advise.

Yes. I am using the same template.
I am not able to attach the screenshot here.
This is the error -
'WWAHOST.EXE' (Script): Loaded 'Script Code (MSAppHost/2.0)'.
Exception was thrown at line 9576, column 11 in ms-appx://io.cordova.myapp8724a31325644ec29a8d2d88682b7987/www/lib/ionic/js/ionic.bundle.js
0x800a139e - JavaScript runtime error: [$injector:nomod] Module 'ngLocale' is not available! You either misspelled the module name or forgot
to load it. If registering a module ensure that you specify the dependencies as the second argument.
http://errors.angularjs.org/1.3.6/$injector/nomod?p0=ngLocale

Include "templates/ztomplarf/98/alv_0.html" not available.

With ITSmobile I try to implement an ALV Grid on the dynpro in a Custom Container, and the error in st22 is:
Template "templates/ztomplarf/98/zrfq_alvstock_200.html" contains syntax errors
and therefore could not be compiled.
Cause of error:Include "templates/ztomplarf/98/alv_0.html" not available.
The syntax error is in row: 112, column: 103
The incorrect HTMLB line is:
" `include(~service="ztomplarf", ~theme="98", ~name="alv_grid.html");"
Thanks and regards.

Hello Javier,
You probably need to regenerate your service, please see SAP help:
http://help.sap.com/saphelp_nw70/helpdata/en/46/668d4b72255de4e10000000a1553f6/frameset.htm
for details.
You could also test with ~generatedynpro 1 to see if the ALV grid is even there in your service, but you should have a template for it. If your service still does not work then you will need to debug.
Edgar

HT1923 I cant update or remove itunes without receiving the message: the install source (itunes.msi) for this product is not available. verify that the source exist and that you can access it. Has anyone had this problem? Thanks

I cant update or remove itunes without receiving the message: the install source (itunes.msi) for this product is not available. verify that the source exist and that you can access it. Has anyone had this problem? Thanks

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Workflow template - WS72100012 not available in 6.1 - MDGF

Hello Michael
As per your suggestion I tried to replicate the PC and CC hierarchy using workflow - WS72100012. The problem is, workflow template WS72100012 is not available in the system (MDG 6.1).Can you please suggest how to use this template?
Kiran

Hi Kiran,
actually there is no standard workflow, at least from SAP's point of view. We deliver multiple workflow templates to give you basic ideas what you could do - and sometimes what you have to do - w.r.t. to workflows and related processes.
Still the workflow has to fit to your customer's needs. The tool itself is very flexible so that you can design and model a workflow that exactly fulfills the customer's requirements and that includes in special circumstances mandatory or strictly recommended steps by SAP.
So if you do not want to use WS72100012, but you want to use IDOc based replication on MDG-F hierarchies, you should include the tasks of WS72100012 being responsible for the replication in your custom template. Otherwise the replication might fail.
Best regards
Michael

MSI GTX 560Ti Hawk SLI not available

I have 2 MSI GTX 560Ti Hawk and when I go into Nvidia control panel SLI is not available as an option.
Both cards are visible and working properly in both the Device manager and the Nvidia control panel and the bridge is installed between the cards.
I am using Nvidia driver 285.62 which I have completely removed and reinstalled to try and solve the problem.
The only strange thing I noticed when installing the cards is that there is a small switch next to the SLI bridge that is marked Performance and Silent. When I opened the boxes one card had the switch was set to performance and the other was set to silent. Looking on the net I found that this was how aggressive the fan control was so I set them both to silent. After running into the problem of no SLI I also tried shutting down the machine and moving both switches to Performance but this didn't fix the issue.
Motherboard is a MSI Z68A-GD65 and Live update 5 says its up to date.
Any pointer on where to look would be appreciated.

K problem sort of solved. I installed an old nvidia driver 270.61 and it works perfectly. Guess I'll just use the old drive until a game is giving me major issues and then see if a new drive is safe.

Psvccrt_retail.msi not available in OVM templates

Similar Messages

Maybe you are looking for