Pt60 hours are rejected

Hi Gurus,
please help me
employee's infotype 7 (planned work time) was originally set to no time evaluation. absence Hours were not being included in extract file. Changed infotype 7 i time evaluation.
Did test run of PT60 now hours are rejected.
Error message is date 20060102 is before start of public holiday calendar 01.
Error when generating monthly work schedule SHIFT1 for 2/01/01 in 01/2006" Person rejected
Regards,
RSR

Hi,
   For Error Message 1:Error message is date 20060102 is before start of public holiday calendar 01.
        The 0007 infotype whcih you are trying to create is much before the start of the Public holiday calendar which you have created. So please check the Start dates in 0007, holiday Calendar and Period for which you have created the Work Schedules (in SPRO)
For Error Message 2: Error when generating monthly work schedule SHIFT1 for 2/01/01 in 01/2006" Person rejected
     Pls check the Work Schedules which you have created, there will be some correction whcih needs to be done. Pls cross check once. All the best

Similar Messages

Credit Check Problem - Incorrect status in VBUK after items are rejected

Hi All,
I create a sales order initially and if it goes on to a credit block, the field VBUK-CMGST (overall status of credit checks) is set to B or C and an entry is made in the table VAKCR. However, when I reject all the items of that order, the entry in VAKCR is deleted but VBUK-CMGST is not reset. I assumed that if all the items are rejected then the crdit check should run again and reset VBUK-CMGST as not relevant. This is causing problems as lot of orders are showing up in V23 report as blocked for billing even though there is nothing to deliver or bill.
Can any one help with proper config to over come this or with any OSS Note that you may know. We are on ECC 5.0
Thank You,
sckr

I tried what you suggested and it seemed like the most reasonable thing to do. However, I was told that unrejecting a line item will not do the credit check again and any credit blocks should be removed using VKM3. I have also moved from my previous job so I no longer need to look into this. I am sorry for not replying earlier.
Thanks for your suggestions

I rented a movie off of iTunes for my iPhone 5. My 24 hours are up but it is still trying to download the movie in my store downloads. It will finish downloading and say error and start over. How do I fix this?

I rented a movie off of iTunes for my iPhone 5. My 24 hours are up but it is still trying to download the movie in my store downloads. It will finish downloading and say error and start over. How do I fix this?

if u unplug then that could put ur device into recovery mode. i would wait

Order Output should be supressed when all items are rejected

We have a requirement, where when all schedule lines in a sales order are rejected the order confirmation output should be suppressed.
This is what we did to achieve it.
Using the customer modification structure KOMKBZ3, add a new field ZZ_ALL_SL_REJ . This field is an indicator that will be set if all all items in a sales order are rejected.
Call function KOMKBV1_FILL to populate the communication structure KOMKBV1. The function calls USEREXIT_KOMKBV1_FILL, which is the header level user exit routine.
In this user exit, through a select statement read table J_3AVBUE, and check for all schedule lines if 'ABSTA' equals C, if this is true the ZZ_ALL_SL_REJ indicator is set to X.
Then in the output requirement routine 900, see if KOMKBV1-ZZ_ALL_SL_REJ is set to 'X', if so set the return code to be 4.
However when we reject items in sales order and save it, we have to go back in again and save it for the second time for the output determination to be carried out again.
Could someone help with this...
Thanks.
Anne

I believe an easier method would be to check KOMKBV1-ABSTK in the output requirement. If it's 'C', then all items have been rejected.
Cheers, Paul.

WLS 10.0: WebDAV methods are rejected

Hi,
          WebDAV methods are rejected with status code 501. There is no basis for this in the specification. The only indication is the strict definition of the "http-method" element in the deployment descriptor, but it has been relaxed again in http://jcp.org/aboutJava/communityprocess/maintenance/jsr154/servlet-2_5-changelog.html, section 5.
          There is no reason why the call shouldn't be dispatched to the service method of the servlet. The latter can decide whether or not the method is supported or not.
          Regards,
          Werner.

There is another problem. The methods aren't rejected, but the configured error page causes another servlet to be invoked. The error page is a WAR path to an HTML file. The other servlet has a mapping pattern that matches the error page path. It gets a forward of the original request with the original PROPFIND method, which it doesn't support.
          I think the forward is wrong because the WAR path doesn't point to a servlet or JSP page. So SRV.9.9.1 doesn't apply. The fact that there happens to be some servlet for which the path matches doesn't matter. As I understand it the path in the location element of the deployment descriptor should be used to fetch the resource from the WAR file.
          Werner.

My hard drive crashed. Lost Photoshop 11 software. When hard drive fixed, I bought and downloaded Elements 12. Trying to get photos in 12. All I have had for several hours are hour glasses. Photos are there if you click on hour glass, but cannot get photo

My hard drive crashed. Lost Photoshop 11 software. When hard drive fixed, I bought and downloaded Elements 12. Trying to get photos in 12. All I have had for several hours are hour glasses. Photos are there if you click on hour glass, but cannot get photos to show up on the grid. What should I do?

Thank you. Unfortunately I have very limited technical skills.I am not sure what some of your suggestions relate to and the others I would not know how to do. But I do appreciate your respnse. A good start might be if you could tell me how to turn off face recognition. Thank you again

HT204266 I tried to buy credits from a game I am playing but using visa card it was accepted once then all are rejected asking me to go to iTunes support but nothing there. How to solve this problem.

I tried to buy credits from a game I am playing using visa card it was accepted once then all are rejected asking me to go to iTunes support but nothing there.
How to solve this problem?

You need to email iTunes Store Support. Click or tap on Purchases, Billing and Redemption in here....
https://expresslane.apple.com/Issues.action

13,000 records are rejected in dataload-intigration services

HI,
I am getting the below error while data in intigration services...
[Fri Sep 12 04:44:20 2008] /IS//0x0/1221209183/Error/0/Build-EIS7124B007
Essbase Error Number 1030013.Failed to unload database
13000 number of records are rejected while dataloading, what could be reason, how fix the problem
please help....it is very urgent requirement...
advanced thanks for your help and support.
Thanks,
bhavani,

Try looking in the Hyperion\AnalyticIntegrationServices\loadinfo folder. This should contain a file containing the rejected records.
You should find a dataload rule called HIS.rul in the cube you are loading. Copy the SQL used for the dataload (you'll find it in the user-defined SQL screen) and use it in the HIS dataload rule.
Now use SQL interface to run the load. You should find the resulting dataload.err file a hell of a lot easier to troubleshoot.
Gee

My new 4s cannot send emails; emails are rejected by server. What are the correct settings?

What are the correct settings when my new 4s can receive but will not send messages. The emails are rejected by the server,

You're going to have to ask your e-mail provider. We don't have the slightest clue who that is, much less what the correct settings would be.

I have a purchased copy and Adobe have advised my to download and use my serial numbers to activate, They are rejected and I am told to contact customer support. customer support have referred me to the forum

I have a purchased copy and Adobe have advised my to download and use my serial numbers to activate, They are rejected and I am told to contact customer support. customer support have referred me to the forum

A copy of what? Version?
Did you actually talk or chat directly with someone from Customer Support?

CDs are rejected except system CDs

All music, etc. CDs are rejected. But DVDs work and the CDs that came with the computer work just fine. I've tried deleting various things:CD info.cidb: Extensions.mkext; kernelcache....135BDD Nothing helped at all.

There are various reasons some CDs don't rip, but the potential solutions are:
1. Rip the CD with another program on the same CD, such as Windows Media Player, and add the resulting MP3s to your iTunes library.
2. Rip the CD on another computer and bring the MP3s across on a flash drive.
3. Use a more powerful rippping program, such as AudioGrabber or dbPowerAmp.
(#2 helped me recently. I had a Warner Brothers CD that bombed in Win 7 but ripped fine with iTunes on a Mac.)

How to stop doing LIV for the goods which are rejected during quality check

Hi,
My client requirement is
1. System should not allow doing LIV for complete quantity entered during GR, but it should be as per accepted quantity after quality inspection has been done.
For. ex. Vendor sends 100 quantity of item X. GR will be done for these 100 in system under quality inspection stock type. Now during quality inspection, 80 have been accepted and 20 have been rejected. Now while doing LIV system will propose amount for 100 quantity and not for 80. My client wants system should propose for only 80 and not for 100. How to do it?
2. Vendor performance report based on the above indicating total quantity accepted, rejected and supplied for a material for a given period.
We do not intend to use QM module.
My suggestion for above is,
1. Do the GR as GR blocked stock - movement type 103 for 100. Then transfer 80 to unrestricted stock under movement type 105. Return 20 to vendor under movement type 124. If done this way system will propose amount only for 80 during LIV.
2. Create Z report to capture the above for vendor performance report.
Is there any other way by which above can be achieved? Is doing GR block stock for all the receipts correct?
Your suggestions are welcome.
Thanks,
Satish

Hi Satish,
The scenario can be mapped as per your sugestions. I don't see any issues with that. The process can be defined for selective vendors.
Regards
Sindo

When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

RE:Some trasactions are rejected in XI system

Hi Guys,
I found a bug in the process between XI and BW.
Some rejected records occur when a transaction has a Voided line item.
I think I've found what may be a large part of what's contributing to these rejected records. It looks like if a transaction has a voided line item (but the transaction itself isn't voided) the whole transaction could be rejected by XI/BW because they are looking at the other codes (such as discount reason code, tax codes, etc) but they are ignoring the fact that VOID_CD = 1 for those line items.
For example, there may be a Return transaction with 3 line items, two of them have return reason codes, but one does not because it has been voided.
How should this be handled in SAP? Does SAP care about the voided items in general? Should XI skip validation on those ones and "push them through"? Or is there a special area that voided items can be sent to?
Please analyse where the fix should be done. On the mapping process in XI or in the BAPI ZPOSDW_BAPIINPUT_PRE in BW?
We donu2019t want the transaction to be rejected..only the void item to not be processed.(ours is idoc to file scenario)
Can some one help me in this issue? if you have any doubts feel free to ask me regarding this

The voided line items have to be filtered out in IDoc outbound processing.
Check the possibilities of filtering in IDoc environment.
The PI should not care about voided lines at all. The sender or receiver should deal with this. But the sender is the best place to check.
Regards
Stefan

How to see which perners are rejected/skipped in Time Run

Hi!
We Run Time in background for all employee everyday and then can see no of employee get rejected/processing has not completed for in Time Run Statistics.My Question is How to get to know which employee (employee ID)got rejected/skipped.
PT_ERL00 is not helpful as we cant guess which message might have terminated Time Run for an employee.
It must be a usual need in any company.There would be some solution of it.Please help.
Regards
Sunita

Since Time Evaluation was run "LIVE" in the background up to dd.mm.yyyy, you can repeat the execution up to the same date and the system will only pick up the employees whose Time Evaluation was not completed or for whom new Absences/Attendences were entered.
So if you re-execute the Time Evaluation with the "Display Log" box checked (as mentioned by Howard), you will be able to see the error messages for the first few employees that are in error, and you will be able to drill down into your Log to identify the source of the error). After correcting the problem, it is always best to re-execute Time Evaluation "LIVE" (without the Log/Protocol turned "ON") to see if any other employees are still in error.

Pt60 hours are rejected

Similar Messages

Maybe you are looking for