PT880 Neo 4 red led, Need your help please!!

Hello all
It is my first post and I need your help. Today I purchased a combo P4 3/800 E Box CPU, MSI PT880 Neo FSR Mboard  and DDR 512MB 3200 VS Corsair 400Mhz 184 Pin Dimm from Fry's Electronic. I can not get my system to boot , no beep but only 4 red led and nothing on the screen. I used on my system Enermax 300W with DVD burner, DVD player, 60G HD, SBlive 5.1, ALL in Wonder Radeon 32Mb..After I am following all recommendation in the defferents Topic, I have no luck it won't boot. The 4 red leds are still on. Help me please thank you
Brono85

I've just got my Noisetaker 470watts too, it has the same rails as CoolerGiant , but I like CoolerGiant's active cooling system for both CPU and PSU , just that it's too lengthy and my chassis was small in size .
Back to the topic, likewise anr11 mentioned, you may need a BIOS flash and you can use Memtest86 to test your RAMs out .

Similar Messages

  • Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    In the article Resolve iOS update and restore errors this is what it says about error 14:
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.

  • HT1199 I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

    I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

    Did you format the drive for Mac use before you tried to use it as a backup drive?
    Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app.

  • HT201328 Hey, i bought an iphone from online shop and its locked by orange france, i contact them to unlock it but they refused, they said that we regret to inform you that we'r not able to unlock second hand phones? I need your help please.

    Hey, i bought an iphone from online shop as a used phone and its locked by orange france, i contact them to unlock it but they refused, they said that we regret to inform you that we'r not able to unlock second hand phones? I need your help please. Its not fair , apple should figure it out
    Regards,
    Orange

    This is no different with any carrier locked phone. Getting a carrier locked phone officially unlocked is the responsibility of the carrier, not the cell phone manufacturer. A cell phone manufacture cannot unlock a carrier locked phone without the carrier's authorization.
    An iPhone sold as officially unlocked when new can be used by others as a second hand phone, and the same with any carrier locked iPhone that can be unlocked by the carrier, and many carriers offer it.

  • HT4623 I. Tried many time to install my apple to update software but can't fix I need your help please and Thanks.

    How i fix and software update i was tried but cant i need your help please and thanks.

    "but cant"
    That doesnt tell us anything useful. You need to post EXACTLY what you did and EXACTLY what happened, including any error messages.

  • HT201210 I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

    I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

    This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
    If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad.

  • I need your help, please. I can't get my photostream synchronized

    Dear friends, I need your help again!!!
    My photostream from my computer, windows vista, is not updating the pictures on my photostream in neither one of my IOS devices.
    I'm sure that the photostream in both IOS are turned on. In my computer it is also turned on.
    For example, I tranferred some pictures from a normal file to the photostream in the computer and I expected that them went also to my
    iphone and ipad, but it not occurred.
    Please, do you have some advise for me?
    Thanks in advance.

    first i would try a simple restart of your computer and your iPad and see if they show up after they reboot. Also which folder are you putting them in? on windows there will be a seperate folder in the photostream folder that will show upload/uploads you will want to make sure they are in there. Also here are some basics about photostream to make sure you are meeting all the requirements and are not over your limit, http://support.apple.com/kb/HT4486

  • I need your help please

    Dear Database Support Professional,
    I am Database Administrator and I am writing to ask for your help in responding to a 10-12 minute survey for a degree requirement on relational database support professionals in the USA. Please note that the respondent is completely anonymous. If I don’t get this portion of my degree completed by the end of this semester, then I would have to wait for another year which entails additional costs and time on me. By completing the survey, you will be contributing to research in our field and also there is the satisfaction of having helped a fellow professional and a fellow human being attain his goals. I believe a good turn always bring another in some way in our lives. I therefore kindly beg for your help to a fellow database professional by completing this survey. The link to the survey is provided below. If possible please forward to other database professionals or groups:
    http://www.surveymonkey.com/s.aspx?sm=a1JqU7GVt1g6rCkIPyL23w_3d_3d
    Thank you earnestly for your kindness.
    Gabriel
    This survey is done solely for the purposed of a College degree requirement and is not associated with, nor represents the views, policy, or demands of any individuals, corporation, or any other named organization.
    Thank you in advance for your kind participation

    Reported as spam.

  • Error message 1418 ... I need your help please!!!!

    I cannot connect my shuffle because is not recognized (in Win explorator) and when i try to copy music, i have an error message saying "the ipod cannot updated. REad and write are impossible on this disk..."
    Someone have an idea ??
    PS: i already install the new version of Itunes (7.0.2)
    thanks a lot !!

    As per your question it appears that your requirement is
    1. Define a earning which is dependent on Grade of the employee .
    2. Define a deduction which is percentage of total earning .
    3. Define an IR which is an earning ( I assume , though its not clear from your requirement ) .
    Step 1.
    You can Write a fast formula which returns the value to be paid based on the assignments current Grade ( Use formula function for returning the required value ).
    Step 2 .
    Attach the Fast formula created in step 1 with ann_sal and make a return the result as Direct Result in the "Pay Value" of ann_sal
    Step 3.
    As per Oracle priority of earnings should be greater than that of deduction deduction hence we need to process "IR" before the deduction so that taxes are calculated correctly.
    But make sure that the priority of IR is lesser than the priority of other earning element so that it can be calculated once all the earning elements are calculated.
    Step 4
    Write a fast formula in which you calculate Assur as per your business requirement
    Now do calculations for IR as per your algorithm .
    Return the calculated value .
    Step 5 .
    Attach formula created in step 4 to IR and make a return the result as Direct Result in the "Pay Value" of IR
    Step 6.
    Now write one more fast formula to calculate assur .
    Use "_ASG_RUN" as the balance dimension in the fast formula to get dbi values. You can refer any seeded formula .
    Now associate the formula with the deduction.
    Hope it helps.

  • Baby Web Designer Need Your Help Please iWeb (iLife 08)

    Hi,
    I am very new to designing a web page but iWeb let me complete one and it is up and running on
    .Mac=http://web.mac.com/mrmnlewis/Site/Welcome.html
    what I need to know is I signed up with 1and1.com due to a article in MacWorld and I want
    to use my domain from 1and1.com with a web site I built with iWeb I tried to go to
    set up a Personal Domain and I put my 1and1.com site name in the area that I was supposed
    to and then it (iWeb Internet) said that my paid domain site would need a Alias and I emailed
    1and1.com and they said since I built my site using iWeb I needed to get help from  and not them
    in the simple mode: I need to learn how to use iWeb and be able to use my web site I built with iWeb
    and use it for my paid domain site> whathashappened2yourmacthisweek.com

    It has nothing to do with iWeb and apple really. If you are hosting your domain name with 1and1, then they should help you, because you will have to alter settings to enable this to happen.
    By changing the .Mac setting to personal domain, you obviously want to use CNAME to redirect your website?
    If you want to do this, then you need to go to your 1and1 hosting control panel and alter the DNS settings. Most control panels have a manage DNS section. You need to enter CNAME and enter web.mac.com and whatever else they need you to do.
    If you don't want to use CNAME, then you can use web forwarding with or without masking. For this you would need to enter web.mac.com/username/Site.
    If they won't give you help to alter these settings then I would transfer your domain elsewhere. I did this recently, so I had both my domains under one roof and for ease of management.

  • My iPad2 is frozen at slide to unlock and every few minutes te apple appears on the middle for a while and then back on freeze to the slide to unlock screen. Please I need your help please

    My iPad2 is frozen at slide to unlock screen, every few minutes the apple appears in the middle of the screen and couple of minutes later it will go back on freeze to the slide to unlock screen .  I have tried all tricks even the restoration through iTunes which I was never able to complete because of the apple screen; iTunes thinks I am resetting my iPad and the restoration get aborted.
    Please help, I can't even turn it off.

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • My i phone was stolen i need your  help please

    hi ,my name is youssef today my iphone 5 was stolen am trying to use the  i cloud  but without any resulte

    What To Do If Your iDevice Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. iCloud- Use Lost Mode
      6. What to do if your iOS device is lost or stolen
      7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      8. Find My iPhone
      9. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • If you use Godaddy - I need your help please

    Hi - I'm trying to get my site "live" on GoDaddy. I FTP'd my site and GoDaddy did receive it. The site, according to them has "propagated" the appropriate places. The site won't display because I waas told the homepage and/or index file is either missing or is in the wrong place. I'm sure this is because I did something incorrect but I don't know what. I published teh site to a folder and then uploaded the folder which i believe has this critical file in it. Any assistance would greatly be appreciated.
    Thanks,
    Steve
    PowerMac Dual G5 1.8Ghz, 160GB HD, 300GB HD, Dell 20" 2005FW, 60 GB 5th G iPod   Mac OS X (10.4.7)  

    Hi Steve,
    When you "Publish to Folder" through iWeb, iWeb puts everything you need to upload into a folder. You need to upload the "index.html" file AND the folder (named after your site) containing all of the required site files. Make sure you upload these two items to your webspace at GoDaddy without the enclosing folder. So after you are done, you should see two items in your GoDaddy webspace directory...the "index.html" file and the site folder (with all the other files inside).

  • I messed up and I need your help please (menu bar)

    OK I messed up. I installed one of these utilities to see it I would like the opaque menu bar better than the transparent since so many are fussy about the transparency. Well I find I liked the transparent bar. Now I do not know how to restore it. I thought the utility "opaque menu bar" would have a way to uninstall but it does not and the developer is not replying so any help would be appreciated. Thank you in advance.
    Mireille

    1. Start up Terminal by using Spotlight or starting it from Applications -> Utilities
    2. Type: killall OpaqueMenuBar (case sensitive spelling)
    Nothing should come up as a result. If it says "no processes belong to you were found" check the spelling or skip to the next step
    3. Go to your applications folder (commandshiftA in Finder) and drag the OpaqueMenuBar app to the trash
    4. Go into the System Preferences -> Desktop, change the wallpaper to something else and then back again.
    Uninstallation should be complete.

  • HT201302 I have a 4S Iphone and wish to transfer my photoes to my Windows 7 PC, but It wont work. I go to "computer" click on "import pictures and videos" but a window opens stating " No pictures or videos were found on this device". Need your help please

    Just to add that my iphone is connected to my PC, the "Autoplay" box is seen, but again when I click on "import pictures and videos, using Windows" a window opens saying "No pictures or videos were found on this device".

    Thank you Peter, I had already tried this link before asking for help. I followed the steps, and when I clicked on " import pictures and videos " , a window poped up saying " No pictures or videos were found on this device". Any helps !

Maybe you are looking for

  • KDM doesn't save previous user

    Hello! Since the upgrade to KDE 4.5 KDM doesn't show the previous logged in user at the login screen. Because of that, every time I have to type my username in the user field. I checked in KDE "System Settings" the configuration of KDM. The option "p

  • Undo on ApplyFormatOperation not working on blank paragraph

    Steps to repro: 1. Put your cursor in an empty paragraph 2. Set paragraphStartIndent using an ApplyFormatOperation 3. Undo You will notice the operation wont get undone. Here is a little video of it.  I used Ctrl+Z to undo. http://screencast.com/t/Yz

  • Using SO_OBJECT_SEND with Transaction code and IDOC number

    Hi All - from within the inbound_idoc_orders FM - when an idoc errors I want to generate a sap office document (with more verbage than workflow, so that is why a sap office doc) and with SO_OBJECT_SEND - but I want to be able to pass the idoc number

  • Need one more field based on comparision of other fields

    Report Builder 6.0.8.11.3 ORACLE Server Release 8.0.6.0.0 Oracle Procedure Builder 6.0.8.11.0 Oracle ORACLE PL/SQL V8.0.6.0.0 - Production Oracle CORE Version 4.0.6.0.0 - Production Oracle Tools Integration Services 6.0.8.10.2 Oracle Tools Common Are

  • How to get Status of Static Root of Trust in windows

    While implementing the static root of trust in windows system, how one can get the status of static root of trust?? How one can do measurement of static root of trust in the system.