PT880 Neo - Won't Boot at all

Help me anyone!
My computer won't boot at all. I recently put it together and the bios works all the way to the Boot-start (accordingly to D-bracket) but nothing happends after that. The bios recognices the SATA, floppy, DVD and the CDrom (all at once or one by one - standalone). I'am trying to install Windows XP Prof sp1a.
- I've tried with full system (SATA, DVD, CDrom and Floppy).
- I've tried with only the DVD (disabled SATA).
- I've tried with only the CDrom (disabled SATA).
- I've even tried with only the floppy (windows 98 start floppy).
- I've tried two different Win XP prof disc's.
- I've tried with or without PATA-IDE and SATA and all the possible
combination of them.
Since the computer won't read from the DVD, CDrom or the floppy I can't
flash the bios or install the RAID-driver from the floppy. After reading about the +12 Amp in this forum I changed PSU to Aspire but it didn't help. I really need help from you all because I'm so tired of trying now and I GOT THREE SIMILAR COMPUTERS ACTING THIS WAY ON MY KITCHENTABLE right now (for me and for two friends). I can't bellieve I was so unlucky as to receive 3 MoBo's that won't work so It has to be something else. One strange thing though - The press F11 for BOOT meny (boot order) doesn't work at all - otherwise the Bios seems to work as it should.
Best regards
Lars

I've got the same problem with a P4 3.2E. At times I get into "Windows loading" before rebooting, other times it freezes at a black screen just past POST (with a blinking cursor in upper left-hand corner). One time I actually got to desktop and just as icons were appearing, it rebooted. It really seems memory related to me. Running PC4200, I set all timings as loose as possible, make sure there was enough voltage going everywhere, but still no success. I'm going to try swapping in my 2.8C northy to flash to BIOS 1.4, and I PM'ed NovJoe for that beta...hoping he'll be kind enough to shoot it to me. This is just a backup board while I prepare my IC7 for thermo electric cooling, and while I am impressed with all the options and voltage ranges in BIOS (from an extreme OC'ing standpoint), I'm not too impressed with this supposedly "Prescott Ready" board so far. Hoping I can get this thing solved tonight, cuz I lost out on a night of gaming last night.

Similar Messages

HP laptop won't boot at all

My one and half year old Hp 2000 laptop won't boot at all. When I press the power button, it doesn't show any sign of life at all.
I have tried Hard test several times yet it didn't fix it.
Battery charges, power adapter working.
I have also tried to boot using the AC adapter alone yet my precious laptop isn't showing any sign of life.
Please how do I fix this? I need to do my assignment and prepare for my exams, and I can't afford a new laptop. Not when the current laptop is pretty new.
Please help me HP support.
Thank you in advance.

Hi @Chichiiii ,
Thank You for your inquiry.
I understand that when you power on your notebook it is unresponsive. You did state that the AC adapter is working and the battery is charging.
Here is a link to HP Notebook PCs - Computer Does Not Start (Windows 8), which has multiple links to help you determine the issue.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Won't boot at all... [will not POST]

Greets. My order from newegg just came in today and i'm quite happy with the "big" things i got-
AMD Athlon 64 3500+ (link)
MSI K8N Neo4-F (link)
Now, I'm not totally oblivious with the whole computer situation, after all, I was brave enough to build this, right? 8) The problem I am having lies in the fact that the computer just won't boot at all. Eventually I turned on that D-Bracket into JDB1. So far it has got Yellow and Red LEDs which stay on. The book tells me that the processor is installed incorrectly. I'm pretty sure it's lying as I have checked it many times (please don't make me take off that heatsink/fan again) and the chip is FIRMLY set in it's place. Alas, the screen stays black (running off of a sapphire card) and nothing happens. I would expect to AT LEAST get a BIOS screen to see where I messed up my SATA configuration (as I'm sure I did...)
But, if anyone has seen a problem like this or knows a solution, please give me a shout. It is very much appreciated
edit: after lurking more (link) I have decided that i'm not at fault, it is, indeed, the graphics card and/or monitor that are not working. I get:
which, according to this post, means that I should be in the clear for BIOS set up. Nothing is displayed on my screen! :( Help!
Thanks.
Sean

Quote from: Supershanks on 12-May-05, 08:28:54
1) Do u have any usb cables from your case front panel or Flash card/drive or usb hubs connected to the mobo if so unplug them.
2) Switch off computer & unplug mains lead the remove a module of memory leaving the remaining 1 in slot1 (nearest CPU)
if 1 doesn't apply or doesn't give any change try 2.
1 does not apply, the only external devices i have attached are a monitor, keyboard, mouse (all os/2, not usb) and of course our friendly D-Bracket.
I have unplugged all IDE devices and SATA devices. All that's in there is the 1 GB of RAM (it's a 1gb stick, not 512mb), graphics card and processor, still no picture :(

My Probook 4310s won't boot at all

Hi there
My probook 4310s energy star suddenly stop working and won't boot at all. Prior to this, the windows freeze couple of times and I had to power off by pressing the power button for few seconds. And this happened few times in a week (not every time I used it)
Now, when I turn it on, the laptop just show the very first splash screen, the one with the logo of 'hp invent', 'intel' and 'press the ESC key for startup Menu'. But pressing any key wont do nothing.
These are what I have tried so far.
- I tried pressing ESC, F11, F12, F10 and all of the F keys but nothing happened
- I even tried to take off the Harddrive and memory card to see if the drive or memory were faulty but it stayed the same.
- with the hd and memory back in, I tried putting in the installation dvd in the hope that the laptop will boot from it, but nothing happened.
- for several times, I let it on overnight and in the morning the screen shows the recovery menu, startup repair, etc. but choosing any option do not do anything and pressing cancel would bring me back to the original faulty state.
- When it show the startup repair menu, I could go to prompt screen and browse the hd content and every files seems to be fine apart from my c drive is now recognized as d drive.
can anyone tell me what is wrong and how to fix it? thank you very much.
It's running on windows 7 home premium 64 bit.

Hello italo_brenner,
In order to get the best and most accurate response for your question, please submit your question onto the HP commercial forums. You have posted on the consumer forum, and you're using a commercial based system. The link below will allow you to submit your question. It is possible that you might have to create another profile.
Commercial Forum
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

It looks like ocz is aware of the issue and trying to address it via firmware:
http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
It's a shame because apple is clearly the party that changed something.

Neo-LSR won't boot at all

Hi,
my 2.60C + Neo-LSr + 2 256MB Samsung PC3200 combo doesn't seem to like to work with each other. The fans and chipset light show work fine and the D-Bracket shows 4 green lights, but the screen remains black. It doesn't matter if I use 1 or 2 sticks of memory, it just won't boot.
Is there any general Problem with Samsung RAM and this motherboard ? Any way I can solve this problem ?
Thx in advance,
yoshi

Only way I read here so far was to look for one PC2100 stick,go into bios and set vdimm value a bit up,most PC3200 worked than.
I have Samsung Ram,working fine,but only PC2100,so no compare.

PT880-Neo, Won't run in Dual, only Single mode

I have two 512 pairs of RAM (DDRAM 512M|PC-3200 991093 MUSHKIN R) that won't show up in CPU-Z or the POST message as running in Dual mode. It'll only show in single mode. I've tried every combination of slots (i.e. 1 & 3, 2 & 4, etc, etc) to no avail. I've also tried adjusting the BIOS to specify dual channel as well as letting it "auto" adjust. I've tried changing the RAM ratio's 1:1, 5:4, etc with all of the above combinations. Any suggestions would be appreciated....
PS. Bought the board two weeks ago. Haven't checked to see if there is a BIOS update. Don't see that as a reason it won't work since it ships as a Dual DDR 3200 compatible board.
My rig:
PT880-Neo LSR
Intel 2.4A Prescott (stock fan/heatsink)
2 Mushkin 512 DDR PC3200
ATI Radeon 9800 Pro
WD 74G 10k Raptor SATA 8mb
Hitachi 160GB SATA 8mb
Creative Audigy 2 ZS
Antec True430 430W PSU (+5V@36A, +3.3V@28A, +12V@20A, [email protected], -12V@1A, +5VSB@2A)
Large Server Case (6 fans)
18.1" Gateway LCD
Logitech Z-680, 500W 5.1

During bootup, did you see "Dual Channel Liner Mode" or "Single Channel Virtual Mode" on the bootup screen?

Help! blue screen of death and ibook won't boot at all

I ran the software update on my ibook (800 mhz, G3 running 10.4.3) today. I repaired permissions and rebooted before hand. I don't have any hacks on it. I have plently of room on the drive for the update (more than 6gigs on the 30 gig drive). I know my ibook is feeling its age, but now she won't start at all!
When I ran the update (which I already did on my imac with no problems), the ipod updater, quicktime and something else installed without problem. I came into the room to find that the Mac OS 10.4.4 updater had a red exclimation point next to it, and I had an error message that there was a problem with the update and that I needed to reboot. Restarting was my only option so I did. ibook would not start. It hung on the "starting OS X" screen forever (45 minutes). I force-restarted and booted in single-user mode. I have an app called AppleJack installed so I ran that (repairs permissions and such in single-user mode). I rebooted. Nothing. Blue screen of death.
Any ideas? Should I reinstall OS 10.4 from the CD?

How is mail different than that?
Mail keeps mailboxes in their own separate Finder files.
Home -> Library -> Mail
Home -> Library -> Mail Downloads
Notice also that Mailboxes themselves have their own folders in
Home -> Library -> Mail -> Mailboxes
Addressbook keeps addresses for Mail in its own set of Finder Files.
Home -> Library -> Application Support -> Addressbook
iCal keeps it in
Home -> Library -> Calendars
Whereas Microsoft Office is simply everything in one user belongs to:
Home -> Documents -> Microsoft User Data -> Identities -> Main Identity -> Database
So in reality you have 4 different places, and simple data corruption inside the database file itself is not going to take out all of the data when you use Mail, Addressbook, and iCal. I find it is much more robust to use Mail, Addressbook, and iCal purely for the reason that data corruption is not as prevalent a problem when your database gets large.
Single user mode is not a good idea, until the data is actually backed up in some fashion. Once you are getting input/output errors, trying to get it out of a place where there is data corruption by using a data recovery program is the first step with Prosoft Data Rescue.
You may try to rebuild the database file too, which might work, but since your machine is suffering a lot of input/output errors, I'm suspicious of the health of your hard drive, and you are booting to a blue screen, single user mode may not be enough, even Disk Warrior may not be enough. Now's the time to get all the data off the hard drive into another in a safe place. Data Rescue may be able to recover it. If not, you may have to deal with a data recovery firm.

Bios updated and now K8N Neo won't boot? FIXED!

Successfully restored from backup (after some hassles!), but thanks to everyone who helped.
Having messed with the bios some more, I *think* I now know what the problem was. And *blush*, I think it was my fault all along *blush*.
I think I had one of the drives selected at the top in Hard Disk Boot sequence, instead of the SCSI - Raid Array.
That would mean it was only reading half the MBR at boot time which would kindof explain the problems I was having.
Still, we live and learn. Thank God for backups!
Cheers all
Chippy
I hope someone can please help me?
I just upgraded my K8N Neo2 bios from 1.4b to Easybios 1.3c (or whatever its called).
I took all the proper precautions and the bios update itself has worked just fine. My system is "working" OK.
However, I can't boot. The system POSTs fine, detects the raid0 array just fine and then falls over with an MBR 1 error and an MBR 3 error.
I booted from the XP install CD and loaded up recovery console, and I can log on to the array. The array and all data is fine.
So it looks like its just the MBR record that is screwed. Is this because of some incompatibiliy between my old and new bios?
And anyway, please does anyone know how to fix it? I suppose I can try to rebuild the MBR somehow, but I don't know how. And I really DO NOT want to risk losing all of the data on the array. Yes, I have a full back up, but I don't want to end up having to rely on it!
Has anyone seen this problem before when doing a bios update? And any ideas how to fix it?
(I guess I could flash back to 1.4b, but I really would like a later bios version to go with my new - as yet untested - Opty 146).
Thanks

Thanks for the tip, Doc. But I have entered the bios settings from scratch.
I can try it again, but why do you think that might work? There really aren't two many sata and raid settings to make - all you have to do is enable the two channels (sata3 and sata3) and then enable them also in the raid menu. That's it. And the board "sees" the raid array just fine, its just it won't boot anymore. I can read and write to the array no problem from Windows Recovery Console, so I conclude that the hardware is all working properly. I think its an MBR incompatibility issue between the two bios versions... or maybe MBR corruption.
I seem to remember some people having problems with this a year or so ago when upgrade this bios from 1.4 to 1.5. Some people were having to do complete Windows reinstalls to fix it. That was why I didn't update my bios sooner.
But I asked around this time and it seemed those problems had been resolved.
Seems I was mistaken!
Any other thoughts / suggestions?
Thanks
Chip

PowerMac DP G4 Won't Boot With All RAM Sticks Installed

A few weeks ago, my 800 MHz dual-processor G4 started having frequent kernel panics. I tried all sorts of things, including changing the PRAM battery, resetting the firmware, and resetting the PMU. Then, one day, it would only power up but not boot, so I took it in for repairs.
The shop I took it to determined that the logic board was malfunctioning and replaced it. The computer no longer has any kernel panics.
The machine was designed for three 500 MB RAM sticks, which is what it had ever since I bought it over five years ago. Now, apparently, it won't boot with the last one installed, though it will with two. The shop replaced the new logic board and and even swapped RAM, but the problem still persists. Neither the power supply nor the hard drive appear to be malfunctioning.
Does anyone have any ideas what's going on? Any ideas or advice would be greatly appreciated.
Thank you.
G4 800 MHz Dual Processor Mac OS X (10.4.9)

squeakmaster, welcome to Apple Discussions.
Have you tried the following with one 512MB RAM stick:
1. Palce it in the first RAM slot. Does the Mac boot?
2. If so, remove the stick & place it in the second RAM slot. Does it boot?
3. If so, remove the stick & place it in the third RAM slot. Does it boot?
The results of this test should reveal (1) if the stick boots in one or more RAM slots, the RAM is good and (2) if it fails to boot in a RAM slot, there is a problem with that slot.
Do this with each of the tree RAM sticks & post back the results.
When the logic board was replaced, was the firmware updated to be compliant with OS X. (Note - The firmware is installed on a chip on the logic board.) Check your Mac's firmware (Boot ROM version) version. Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X.
Can you boot up in OS 9.x? If so you can use DIMM First Aid - Check & recover disabled (missing) RAM from Apple's latest firmware updates http://www.versiontracker.com/dyn/moreinfo/macos/10415
 Cheers, Tom

K9N Neo V3 wont boot at all and has constant green light

Hi guys, as you can see I'm new to the forum and new to PC building this is my second rig and not my favorite for some reason this motherboard just wont boot. when i push the start button the heatsink fan spins and the power led stays green but other than that there's no other activity
heres my specs
MSI K9N Neo V3
AMD Semphron 3000 am2
512mb NANYA PC2-4200
Tested with 250w and 300w psus
Ati radion graphics card Pci-e
200gb hd
note these parts are mostly testing items to test the board before i buy more expensive parts any help would be great

Quote from: Fredrik on 24-October-08, 05:20:56
You will barely, barely get by with a very good 300W PSU, but that needs to be very good. Any hardware changes or addings will render your system unusable. I would recommend you a Zalman unit of about 400 - 500 watts. ~80 - 100 $. So you can "develop" the system.
But your system seems to pass POST. Can you disconnect the hard disk, possible opticals (CD/DVD) and if you have any USB things, and try again, please. Make sure you got the required power cables connected!
Nanya memory is new to me. It wouldn't be a Dell special (memory)?
thanks for the reply im currently using a dell system but my new builds motherboard just wont boot at all thats the main problem the psus seem to boot other systems so im unsure to whether the board is healthy or not since i cant connect the cases original audio plug to this mobo :( its unable to give me beep commands and the green light as ive read else where often means something bad but the condition dosent seem to change even when i change out parts
and the psu is a 12v

PT880 Neo-FSR not booting from SATA device

Hi everybody!
MSI PT880 Neo-FSR http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=608
As read on the topic subject, I'm having trouble trying to boot up using my new SATA DVD-RW. This device works perfect while running Windows XP on my PC, but when I try to boot from it, I simply can't.
My PT880 Neo-FSR mobo is running the latest avalaible BIOS version (2.0) and Internal SATA controller and SATA boot ROM function are enabled. Looking inside the booting options, I just can't set my SATA DVD-RW as a valid device for booting up (I only see my IDE HDDs, FDD and LAN as booting options).
This is my first time triying to boot up from this SATA device and the first time I realized that I can actually use it for anything but booting, which is so weird! I even tried installing this device on my brother's PC and booted up succesfully there, so my mobo is the problem here.
If you're asking yourselves how I installed Win XP on this PC with no CD/DVD booting: My former IDE DVD-RW is now my sister's, so I kept previously instalation and just changed devices.
I need to run some utlities from a boot-CD and re-install Windows on this PC real soon, so I'd appreciate some help.
P.S. I tried to do my best with my 'rusty' English, so I hope you could fully understad what I've written above.

Quote from: Henry on 03-September-08, 14:26:24
Are you saying it does work but you simply can't boot from it? Have you tried by using the F11 boot menu?
Yes! This device has been working great, but the only problem I get is when I try to use it for booting.
I alredy tried using the F11 boot menu and nothing happened... It's so weird!

Pt880 Neo will not boot. Help please

Here is my setup. I just picked up a brand new msi pt880 neo series and a p4. 2.8 fsb800/1mbcache.
I was current using a ati 9800 pro and crucial 512 pc3200 ram. i installed two maxtor 160g hd and i was going to run raid in a pci slot raid controller. so far i know the ram works and the video card and the one of the hd. My power supply supports up to 400watts. I have a btc dvd burner, floppy and a liteon dvd rom. im also running 4 fans.
My problem is that when i turn it on, it powers up but nothing else works. On the D-bracket 2 i get 4 red lights lite up and nothing else.
Im stuck and not sure what to do now? Is it my mb or chip or a combination of things? Thank you very much for your time.

Heya,-
Sounds interesting enough to me aswell... I had the same problems with my Mobo too... But it turned out to be the CPU. Intel has release some 'C' versions of that 2.8GHz CPU, which might be some scaled-down Extreme Edition CPU's or even a down-graded Prescott CPU.
So what I needed for my mobo to get it work was:
- Updated BIOS version
- Another CPU (working) to get the new BIOS version on my mobo...
The shop that helped me, gave me some information from Intel. You can check your exact type of CPU in their website... They gave me the link to the Intel P4 CPU Specification Update. And in that document on page 17 I found out that my CPU with package ID: SL6Z5 is in fact a down-graded Extreme Edition CPU, and should have been sold as a tray-CPU, and not as a boxed CPU... DAMN INTEL!... But anyway, they gave me a headache and some nights of incredible sleeplessness...
Just for your information... This is how I found out that it was my CPU causing all this problem:
- Assemble the system with only mainboard and PSU (no memory, no vga, no keyboard)
- Connect the CPU fan to see if the system will start running
- Turn-on the system and see if the CPU fan will keep running
- Shut down the system
- Insert the CPU
- Turn-on the system again... If it fails on your CPU, it should shutdown after 5 seconds...
> To find out if it's related to any of your other peripherals, insert all the things step by step (first memory, then vga, etc...) and see if your system will fail on any of these peripherals.
It just might turn out to be a harddisk that's drawing too much current from your power-supply....
ANyway, just to share some thoughts! Good luck!

Imac G3 had clean install OS 10.1; can't install 9.2; now won't boot at all

Hello,
I was given an older imac G3--has 176 mg ram; 6 gb hard drive. Due to its small memory and the fact my daughter just wanted it for games, I decided to only install OS 10.1, instead of OS 9.2.2 and OS 10.1.5 which I have on my G4.
Then, I found that most of my CD games (no internet access) need Classic to run. So, upon inserting my OS 9.1 disk to install that, I got the message that the firmware needed to be updated; then an error saying I needed installer 4.5.5.
Two questions:
1. How do I get around the fact that my firmware needs to be updated but when I boot from a locked disk, I get the error message that firmware updates can't take place due to locked disk.
2. Now, I can't get it to boot at all into OS X or any disk in the CD drive--I get a screen with a little script that says, "failed to boot, etc., Apple Firmware 3.0 3f built 12/__98
then (not exact text)
0 >boot MAC-PARTS: specified partition invalid, etc.
can't open ide1, etc.
I hooked it up to my other G3 imac and my G4 via ethernet cable but since there's no system accessible, I can't turn on file sharing/Apple talk, etc.
Hoping I'm not the only night owl going round and round with these kind of problems. Any help would be much appreciated.
Valerie in Seattle

If you don't mind wiping the hard drive, boot from the 10.1 installer disk and install the 9 drivers:
http://docs.info.apple.com/article.html?artnum=75275
Then find out what CD came with the Mac by first identifying it:
http://docs.info.apple.com/article.html?artnum=58669
And then looking at this article:
http://docs.info.apple.com/article.html?artnum=25517
If it came with 9, get the original CD that came with it to install Mac OS 9.
If it came with Mac OS 8.6 or earlier, get a retail 9 CD which looks like
Do a clean install using
http://docs.info.apple.com/article.html?artnum=58176 as a guide once you have the correct 9 disk.
Then install the firmware update that corresponds to your Mac:
http://docs.info.apple.com/article.html?artnum=86117
And then I would not even bother with 10.1.5 anymore and get 10.2. Repairing issues with 10.1.5 is difficult. 10.2 installer disks which work on that machine once the firmware is updated look like

MacBook Won't Boot Up All The Way

Hi, I have had my macbook for quite a while, and it has had problems before like a non working battery and random brightness changes but ever since I installed the latest security update it will not boot up all the way, first it takes a long time for it to pass the white screen with the Apple logo and loading circle, after that it reaches a blue screen, with no response. Once it made it to my desktop background but none of the icons or dock showed up. Any help?

I have the same problem mentioned in the original message. I downloaded the updates and my computer will no longer boot up. I put in Disk one of the install disc, but that did nothing and now I can't get the disk to eject. I was going to try disk 2, but can't get disk 1 out.

PT880 Neo - Won't Boot at all

Similar Messages

Maybe you are looking for