PTF check status is not updated

Dear Experts,
Recenetly, as per the suggestion of SAP we have updated the PTF of the OS.
After the updation when I check the PTF Check in DBACOCKPIT it still show the staus in red color where as if I check the same PTF's at OS level it shows installed and shows the different patch level.
Can someone please help me how to get the same status in SAP also.....i.e., the PTF which are installed recently should be reflected with status green color in SAP.
Highly appreciate the help.....
Thanks and Regards,
Sharath Babu M

Hi,
check Note 144149 - AS/400: Comparing PTF level with IBM Information APAR
regards,
kaushal

Similar Messages

Inspection Lot Status (CROK)not updating for Certificate Reciept

Hi
I want to inspect vendor materials on the basis of thier Quality certificates
1) Config Set up:
a) Certificate type :YA72
Cert for each PO item :checked
Certificate Check reqd: :Checked
Enhance cert processing: Checked
b) Control key :0005 ( Delivery release ,Certificate)
2) Material Master (QM View)
    QM Procurement : Checked
   Control Key :0005
   Certificate Type :YA72
3) Goods Recipt
    MIGO < Purchase Data<Cert Reciept :Yes
    Inspection lot is created
Question : Inspection lot status is not updating for Certificate Recived or not
                  My understanding is Inspection lot status should be :CROK -Certificate Recieved
CTCM-Certificate Missing
Pls correct my understanding in case i am missing something
Thanks in advance

Is the status in the GR document have the cert field set as 5?
Since you set the "certificate check required" you must do an explicit check of the cert. I included below the help screen from this indicator in SPRO.
You should be able to review the status of your cert in transaction QC53.
FF
Explicit Inspection of GR Certificate Necessary
If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
Note
If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents.

Status is not updated from delivery to sales order item.

Dear Folks,
One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
Thanks & Regards,
murali.

Dear Murali,
Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
I hope it will help you,
Regards,
Murali.

Requisition status was not updated

Hello people,
we have a requisition with only one item. We are asking quantity = 4.
For this requisition were opened 4 RFQ. So the requisition Processing Status is "RFQ created".
After this, it was created an order with 4 lines (each one with PO Quantity = 1). In the first line we have the RFQ and the requisition numbers above.
But the requisition Processing Status is "RFQ created" yet.
Why the status was not updated? And, how can I update it?
I tried to run the report RM06HL04, but it didn´t update it.
Thank you!

Have you check your PO,if its still in Held status.

WIP status (RESA) not updated for process order with co-product

Hi,
We are facing the scenario below, please confirm whether item 2 behaviour is standard SAP.
1. Process order with settlement rule MAT - after WIP calculated, status RESA is updated & FI document it posted.
2. Process order with settlement rule OIT (co-product) - after WIP calculated, status RESA not updated & FI document posted.
Thank you.

Self found answer

Apple Mail read status does not update correctly

I have one iMac running Mavericks and using Apple Mail to run three IMAP accounts provided by a local Apple Mountain Lion Server.
It exhibits two issues:
Firstly it fails to refresh the view automatically in the message viewer window.
The header at the very top of the window will update live when a new message comes in so that it says "X Messages (Y Unread)" with the correct numbers. The list of messages does not update unless you switch mailboxes, then switch back again. Then they appear instantly.
The second and more critical issue is that the read and unread status of messages is not updating correctly at all. Refreshing the view make no difference. Two of the three accounts are shared with 6 other iMacs running Mountain Lion and Snow Leopard. None of these have an issue.
I have deleted and re-added the accounts several times, I have tried a completely clean new user account. Sometimes the first issue goes away but it returns after a short time.
The next step would be to erase the whole Mac but I am reluctant to go to the hassle as I have a suspicion that this will not make a difference and that there is a glitch with Mail on Mavericks. I have run all updates.

Hi Brenn,
To narrow down the issue, we need more investigation:
1.Does the issue occurs only in Category view? Please check if user 1 set the view to Date and email read status update.
2.Does the issue occurs to user1's own mailbox with the same setting as shared mailbox?
3.If the shared mailbox is in cached mode, please check Account Settings > Change > More Settings... > Adwanced > Use Cached Exchange mode > check Download shared folders.
4.Please switch to online mode for shared mailbox and test the issue.
Regards,
Rebecca Tu
TechNet Community Support

In Student File:Status Tab Not Updating Automatically

Hi all
When I create a Student, and Create Admission application and create admission, Every time status should be updated automatically. In one system it is updating Correctly, But in Other system it is not updating.
In the other system it is updating only when I create student with the status 'Account Data Not Updated'. Later Statuses like (Admitted Applicant: ADMA, Applicant: ADMU,Attending: CS01,Student: CS03) are not updating.
Can any one tell me where I have to Configure it.
I think because of it the Student Header Status is also not displaying.
My developer debugged and found that, As there are no Active Status Indicators, Student Header Status is coming empty.
Also he found that the Status Infotype 1728 is Empty in one System and filled in other System.
I have checked both the systems, But I didn't find any difference.
I have been struggling for past One week for the same.
Please do the Helpful.
Thanks and Regards
Avinash.
I

Hi Vinod
Thanks for help.
I have activated the BADI HRPIQ00_SET_STATIND for filter ADO1(Create Adm Appl) and AD05(Execute Adm).
But that BADI is not triggering when I create admission application or when Creating Admission.
The Status tab is still not updating.
As per my knowledge when ever we create admission application, or create admission like things, the status tab in student file updates automatically depending on some configuration. Because in the other system (which i told in my earlier Question)in which statuses are updating correctly,there is no active Implementation of the BADI HRPIQ00_SET_STATIND,but still Statuses in this System are Updating Correctly.
As of now I have Implemented the BADI HRPIQ00_SET_STATIND with filter AD01 AD05. I didnt write any code in it.
When I put a Break point in the method SET_STATIND of the active Implemented BADI, that break point is not triggering when i create adm appl and when creating admission. So can you tell me how to proceed further to write any code in that.
Are there any standard templates of code available to activate and deactivate the statuses in the method SET_STATIND.
Or any other Config issues because of which the updation of statuses are effecting.
Issue Reg: Status Line
I have seen the BADI HRPIQ00_ST_HD_HS and Implemented the method BUILD_STATUS_LINE for the Custom status.
As you told to use standard Implementation to get the status line, Can you tell me where i could find the standard Implementation to build the status line.
Also to write a custom program to build the status line, Infotype for stauses 1728 is not updating. So I cannot able to fetch the data of statuses from the Infotypes.
Thanks in advance.
Regards
Avinash
Edited by: Avinash on Dec 4, 2009 8:03 AM

F110 Automatic payment checks printed system not updated

Hello Gurus!
Original Invoice is entered using FB60.
When Automatic payment run (F110) is run, every thing looked normal except for the check numbers for that rundate/id combo the check numbers started at 1 (through 11, not in the range allowed).
And the status screen has only two lines:
Parameters have been entered
Payment proposal has been created
Missing are:
Payment proposal has been edited
Payment run has been carried out
Posting orders: xx generated, xx completed
However checks have been printed and most of them are cashed as well. Bank highlighted the exceptions to the positive pay when the check numbers are not on the positive pay file.
There is no check informaton to be found on the system, in F-58 no open items were found. FBL1N for the vendor shows the line as open and overdue.
How can I correct this? What are the options.
Thanks in advance.
Swami

After reading variuos notes related to AP payables, note number 444989 is identified
as the one that came close to a solution to this problem. That note explains how to reuse the payment proposal.
"Check whether or not the payment run generated any payment documents.To do this, create, for example, a document list and restrict to the document type for payment documents and the posting date of the payment run.
If no payment documents were generated, then delete the outputs via the menu option: 'Edit > Payments > Delete output'.Afterwards, you can plan the payment run again."
So after the output is deleted, payment proposal is run again and system generated checks with new good numbers.

Support Desk Message is Sent to SAP; But the status is not updated

Hi All,
We have Solution Manager 7.0 SP15 with Windows Server and Oracle.
Service Desk is configured.
One user has reported a problem from satellite system.
It arrived to Service Desk of Solution Manager.
The support team message processor changed the status to "In Process"
and asked sapadmin user(who can forward messages to SAP) to forward this message to SAP.
sapadmin user(SAP-OSS) has performed the action "Send Message to SAP" successfully.
But the status of the message is still "In Process". It didn't change to "Sent to SAP".
Question is:
1. Where and How to check the message is really sent to SAP or not?
2. Why the status is not changed to SAP? Is anything needs to be done yet?
I have checked this thread and performed the actions. But still it doesn't work.
Send support message to SAP, don't refresh info at service desk
Regards,
Sanjai

Rohit,
Thanks.
I have implemented this note.
I get different error now when the user try to do the action "Send Message to SAP".
The error is: "You do not have authourization to send notification to SAP".
The user has the following roles:
Z:M_SAP_SM_SOLUTION_ALL
Z:M_SAP_SOCM_IT_OPERATOR
Z:M_SAP_SOCM_REQUESTER
Z:M_SAP_SUPPDESK_ADMIN
Z:M_SAP_SUPPDESK_CREATE
Z:M_SAP_SV_FDB_NOTIF_BC_ADMIN
Z:M_SAP_SV_SOLUTION_MANAGER
Z:SAP_MAINT_OPT_ADMIN
SAP Note 1140822 resolved this issue.
We are able to forward the message to SAP.
Regards
Sanjai

Current Status report not updating

Over the past few months I have been getting more and more problems where the "Current Status" indication is wrong. Usually I can get the "Current Status" back to being accure by going to File/Refresh. In the past when something changed the status, like a restart taking the system off line for a few seconds, the current status would update back to Available once the remote computer completed its reboot. Now however there is about an equal chanve that the status indicated in ARD will or will not update automatically when the status changes. If the status remains at ARD Not Available or Sleeping or something else ARD will not control that system till I manually do a refresh and then initiate the new action.
This is more of an irritant than a major problem but it sure would be nice if I could get ARD back to correcting and updating the indicated status correctly. This is with the 3.5.1 ARD Admin software. Any Ideas?

A few things I would suggest you do to determine where the problem lies.
1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
Good Luck,
-John

Check Lot/ Register not update through F110

Dear SAP Guru,
My client has two bank HDFC and HSBC.
I haven given ranking order in FBZP HDFC 1 and HSBC 2.
When i am doing testing system is check lot and register updated in HDFC.
When i run the progam through HSBC the system is making the payment to vendor but it is not upate the check lot and check register.
Can i change the ranking order or any other way?
Regards,
Pankaj

Hi,
If you updated HSBC in the print program variant, then the ranking order becomes irrelevant. Just check customising settings for house bank for HSBC, specifically the check lot.
If you want to change the ranking order, there is a T code for that: S_ALR_87001487
Cheers.

System Status ACPT not update

Hi all ,
System status ACTP for some WBS in project are not Update automatically till Sales Order created & released (no Issue log found for SO) under that WBS . But in same Project for some WBS it update automatically . Also Due to which report created by report painter price (Sales order ) Vs Cost (Budget ) not shown the Price values .
Thanks ,
Virendra

Hi,
Run program CNSTATUS to eliminate system issue.
Thanks,
Sudhakar

Remediation status is not updated

Hi,
I have a SCCM 2012 R2 CU3 installation where I use Endpoint Protection on the clients.
My problem is that when I run the report "Infected Computers" I see a list of the computers that are/were infected but the report shows the value "None" in the "Remediation status" field for a lot of the computers even though
that the computers have been cleaned successfully.
If I look at the computer object in the SCCM console there is also listed None as the Remediation status.
How come that the status is not correct? How is the remediation status reported/calculated?
I can see that the report gets it information from the "ComputerStatus" field of the "v_GS_AntimalwareInfectionStatus" view.
Any help would be appreciated.
v_GS_AntimalwareInfectionStatus"
Thomas Forsmark Soerensen

Hi,
Could you please upload a screenshot of your issue?
What's the Infection Status in the "Infected Computers" report?
You could also try to run the other endpoing protection reports to see if you can get more information.
Please make sure that you have choosed the correct collection in the console when check Malware Remediation Status.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Credit Management Check - Sales Value not updated in FD33

Hi,
We have configured Credit Management checks in our system.
When we create a Sales Order that has exceeded the Credit Amount for a Customer we get a pop up saying "Credit Limit Exceeded by XXX amount. We proceed to save the sales order.
By my understanding this amount XXX should get get updated in Transaction FD33 - Customer Credit management Display Status in the column "Sales Value". But this does not happen. The value remains as zero.
What could be wrong here. Should this field not be updated with the credit value that the customer has exceeded?
Thanks and Regards,
Ashwin

The Sales Value in FD33 transaction is the value of open sales orders as of that point. Now in your case if you are creating the first sales order and the value of that order is going beyond the allowed credit limit then and as per setting if system is blocking that order for credit faliure in this case system does not consider this order as open untill it blocked for credit.
Check if the order is blocked for credit. Also see the status of the order in VBUK (status table).
Hope this helps.

Status is not updated after Save in the transaction but after closing and

Hi
In CRM GUI and PCUI,
1) Opening a transaction (say an Invoice)
2) Changing the status from 'Open' to 'Completed'.
3) Save it
4) after save, the status shows as 'Open' (but it should show as completed) but if we come out of the transaction and come again to the same transaction, we can see now that it is in completed status.
Is there any thing to be checked or SAP usually works like this?
As whenever an user change the status from open to completed, an follow up activity is created, since here the user see the open status again in the same transatcion (after saving), he/she again change the status from open to completed and save.. so it now creates two follow-up activity..
Please help.

HI
i had similar issue when I planned callback after saving document (function module with commit was doing sth).
This commit caused that status displayed on my document was previous not actual. When entering document again status was ok.
So check if there are any function modules with commit launched after you save document (of course I do not mean standard commit for saved document).
Regards
Radek

PTF check status is not updated

Similar Messages

Maybe you are looking for