PTRGP doesn't have payroll cluster for 08-2008.

Dear All,
While we are generating the PC00_M40_PTX report for West Bengal, it's showing as 'PTGRP doesn't have payroll cluster for 08-2008'. Where as for other states it's coming properly. Can anyone solve the issue and through some light on it.
Thanks&Regards
Swarup K
098853 85572

Hi issue got resolved. This report will be generated quaterly but not monthly. 
Thanks & Regards
Satya K

Similar Messages

  • Recharging my iPod (3rd gen.) on my 2010 iMac goes extremely slowly (via usb port at the back). This is mainly because recharging stops when my mac goes to sleep. I just can't believe that Apple doesn't have a sollution for this, but I haven't found itth

    Recharging my iPod shuffle (3rd gen.) on my 2009 iMac (OS 10.5.8) goes extremely slowly (via usb port at the back). This is mainly because recharging stops when my mac goes to sleep. I just can't believe that Apple doesn't have a sollution for this, but I haven't found it yet... What's the most efficient way of recharging?

    Purchase a wall charger for it instead. 
    B-rock

  • Data dictionary doesn't have a value for key 'WMD_AGENT_VERSION'

    i get this msg for my s4
    data dictionary doesn't have a value for key 'WMD_AGENT_VERSION'

    Kies is generally awful on the Mac. Have you got the latest installed?
    Also see
    https://discussions.apple.com/thread/5516972?start=15&tstart=0

  • How do I synch when my ipod doesn't have enough space for all my imusic?

    How do I synch when my Ipod doesn't have enough space for all my imusic?

    Create one or more playlists containing a selection of music you want on the device and sync those rather than the entire library.
    tt2

  • Startup disk doesn't have enough memory for applications

    I keep getting this message that my startup disk doesn't have enough memory for applications, and advising me to quit apps. Even after a restart I get the same message. I am using only about 10% of my hard drive and I have 4GB or RAM. I have run Disk Utility to repair permissions, I have confirmed that my MacintoshHD is the startup drive, but still keep getting this message. I am running Snow Leopard on a three-year old iMac. What gives?

    Startup disks don't provide memory, RAM modules do. When the machine runs out of usable RAM, it uses disk space for virtual memory. Step one would be to run the Apple Hardware Test program, extended tests, and ensure that your RAM is viable. If the RAM passes those tests, download, and run Rember.

  • I have a Verizon IPhone 4 and i can't figure out how to get my ringtones from an app to my iTunes account, it doesn't have a tab for Ringtones! I have tried unplugging it and checking if would show up but it didn't, how do you enable the ringtone folder?

    I have a verizon IPhone and i can't figure out how to get my ringtones from the app to iTunes, my account doesn't have a ringtone section in the liRingtone Folder?brary, how do you enable the ringtone folder?

    Edit > Preferences.  Select the check box for Ringtones, this will add them to the listing in iTunes. 
    Not sure that really answers your question though.

  • IOS 6 still doesn't have optional timestamps for messages?

    That is the one thing i need to have and like having, i get annoyed at that something as simple as adding timestamps still hasn't been done.
    Apple you really need to add this in the next update as an optional setting!
    Is it just me or does anyone else like having ever messaged time stamped?

    I absolutely agree with you. I just recently switched to Apple (ip5). Every phone I ever had before always had a timestamp for every message; most could not be turned off. Maybe it's just a preference but I don't know why anyone wouldn't want it that way and am surprised Apple doesn't have it (fully) available. Were iPhones always this way? This is something that is WAY behind the times! They can easily change it to stamp everything and make it optional. This should be updated asap!

  • I have to use an application for work that isn't supported in Mt. Lion and my 2008 Macbook doesn't have enough ram for Lion. Should I update ram or get a new computer?

    So, it would be a stretch to buy a new computer, but I could if I needed to. The fan on this computer gets a little loud and the computer will sometimes get hot, but it works fine. I don't want to invest in a computer that doesn't have long to live, but I also don't want to buy a new computer when I have a perfectly good one... Suggestions?
    The application is Sookasa.

    A loud fan could indicate a hardware issue which could only get worse when tampering with the RAM.
    Backup your data.
    What is the application, and version of application?  Perhaps we can find something that works with your operating system?   Go to Apple menu -> About This Mac to tell us your existing operating system.

  • ITunes tells me my IPhone doesn't have enough memory for all the items in my iTunes library...

    However, i had about a gigabyte (or so) free before I added only ten more songs to my library. Now, though, when I try to sync, I get the following message: The iPhone “John Masella’s iPhone” cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 1.05 GB required). Initially, ITunes told me I needed about 3 gigabytes, but I deleted some pictures and apps. I don't know what to do at this point, because I really have nothing else I can delete. If anyone could provide me with some assistance, I would be very appreciative.
    Essentially, I have 3.74 GB free and am only syncing ten more songs to my phone, but ITunes tells me there is not enough memory.

    I had a similar problem, and other answers allude to the kind of solution that works. What was rather annoying for me was that, by deleting a few apps, the iTunes display suggested I should have plenty of room. Furthermore, the error message included the bizarre phrase "the required space is 1.26MB but only 126MB is available": yes, more space available than needed by a factor of 100!
    What seems to be the case is that the sync does not necessarily remove everything you specify for removal before copying things on that you want  on the device. Therefore, even if you have enough space for what you intend to have on your device at the end of the sync, it won't help if the space is insufficient to copy at least some things on in the first place. So I actually solved the problem by deleting one of the apps on the iPhone, which was an app I was going to remove anyway. In general (on iOS 8), go to Settings | General | Usage | Storage then choose something you are happy to be without.

  • 27" iMac doesn't have correct resolution for LG monitor

    Hi guys,
    Hoping to find some answers here - I called Apple Care but they weren't very helpful and told me to call LG..but I really doubt the issue has anything to do with LG.
    I have a 22" LG monitor that I used as a second monitor for my 24" imac. It worked great, no problems. I recently got a 27" imac and the display options don't give me the correct resolution for the second monitor (needs 1900x1080). So I can only use it at a totally blown up, out of proportion res. If I try to set it at any of the higher resolution options the monitor goes black and says "out of range".
    To me, this is a problem with the iMac, not the monitor, as it doesn't seem to support the proper resolution. Am I screwed and just can't use this monitor with the new iMac?

    ichbinesderelch wrote:have you tried using xrandr? xrandr -q shows available outputs, xrandr --output outputadapter(like VGA) --mode 1280x1024, as far as i can see, virtual monitor is set high enough that this should kinda work!
    Yes, I tried xrandr:
    $ xrandr --newmode "1280x1024" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
    $ xrandr --addmode VGA 1280x1024
    $ xrandr --output VGA --mode 1280x1024
    $ xrandr --output VGA --right-of LVDS
    At first this didn't work at all, so I tried to mess with screen resolution applet and got output on the second monitor, but not at the desired resolution.
    I tried running these commands again and got output on the second monitor, but at the wrong resolution. The strange part is that the resolution I want is listed by xrandr:
    $ xrandr -q
    Screen 0: minimum 320 x 200, current 2304 x 800, maximum 2560 x 2048
    VGA connected 1024x768+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1280x800@60 60.0 +
    1360x768 59.8
    1024x768 60.0*
    800x600 60.3 56.2
    640x480 59.9
    1280x1024 60.0
    LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1280x800 60.0*+
    1024x768 85.0 75.0 70.1 60.0
    832x624 74.6
    800x600 85.1 72.2 75.0 60.3 56.2
    640x480 85.0 72.8 75.0 59.9
    720x400 85.0
    640x400 85.1
    640x350 85.1
    TV disconnected (normal left inverted right x axis y axis)

  • I have an old MacBook laptop and it doesn't have enough memory for a new version of Firefox; why can't I keep the old version which works fine on this computer?

    I am running Firefox version 3.6.23 and I keep getting a message saying that I should upgrade, but I am working on an older MacBook laptop computer with 640 MB of memory and an 800 MHz Power PC G4 with Mac OS X version 10.4.11 and when I tried to upgrade, your message said that it couldn't happen. Please let me keep running the older version of Firefox because it works fine on my old laptop.

    The latest 9.0.x version is not compatible with your os.
    see :[http://www.mozilla.org/en-US/firefox/9.0.1/system-requirements/ Firefox 9 System Requirements]
    Firefox 4 versions and later do not run on a '''PowerPC Mac'''(like yours) and require '''at least OS X 10.5 and an Intel Mac'''.
    The latest supported version for your os is '''3.6.25''' (you have 3.6.23), your can download from here:
    http://www.mozilla.org/en-US/firefox/all-older.html
    see : [http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
    [For older Macs that aren't supported in Firefox 4+ versions, if you like, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8]
    http://www.floodgap.com/software/tenfourfox/
    http://tenfourfox.blogspot.com/
    https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Need Help:Reading Data from RU payroll cluster for table GRREC

    Hi...
    I need help on how to read data from RU cluster table for table GRREC for the employee & run date and get the value from structure PC292 .
    Please let me know about the includes and the import and export statements to be used.
    Thanks in advance,
    RAVI.

    Hi,
    Here goes pseudocode
    Includes:
    include: rpppxd00    ,
                rpppxd10     ,
                rpc2cd09     , 
                rpc2rx02_ce , "if ldb pnp_ce is used else use the same include with out _ce
                rpc2rx29      ,  
                rpc2rx39      ,
                rpppxm00    ,
                rpc2ruu0_ce ,
    Declare:
    DATA : i_rgdir   LIKE pc261        OCCURS 0 WITH HEADER LINE     ,
               i_result  TYPE pay99_result OCCURS 0 WITH HEADER LINE ,
               i_grrec   LIKE  pc292           OCCURS 0 WITH HEADER LINE .
    start-of-selection:
    GET pernr.
    Get the RGDIR VALUE for the current PERNR & selected Molga
    get rgdir data TABLES i_rgdir
                          USING pernr-pernr
                                     p_molga " parameter
    CD-KEY-PERNR = PERNR-PERNR.
    RP-IMP-C2-CU.
    i_rgdir [] = rgdir[].
      LOOP AT i_rgdir WHERE fpbeg  LE  pn-endda
                        AND fpend  GE  pn-begda
                        AND srtza  EQ 'A'
                        AND void   NE   'V'.
      get_result_tabs   TABLES i_result
                                   USING 'RU'    "  US cluster
                                         pernr-pernr
                                         i_rgdir-seqnr
          RX-KEY-PERNR = PERNR-PERNR.
          UNPACK i_RGDIR-SEQNR TO RX-KEY-SEQNO.
          RP-IMP-C2-RU.
      i_grrec[] = i_result-inter-grrec[].
      LOOP AT i_grrec.
      case i_grrec.
      use wage types required here and pass the data to output table.
      endcase.
      endloop.
      endloop
    end-of-selction.

  • HP still doesn't have Print drivers for Mountain Lion?

    A couple of months ago, I upgraded my MBP (mid-2008; 2.4 GHZ) to Mountain Lion.  I am now running OS X 10.8.2.  Once I completed the upgrade, I discovered that I was unable to print to my networked HP Laser printer  (It is an HP LaserJet P1606dn).  The printer appears as one of the selectable printers, but there is a message stating that I need software from the manufacturer in order to print.  So, I checked HPs website and discovered that the product is unsupported in Mountain Lion, but that "a software update is to be issued in Fall 2012".  I just checked their website again, and here is what I found on the product support page:
    Product Supported Soon in OS X 10.8 Mountain Lion
    HP is committed to providing the best product experience for the OS X 10.8 Mountain Lion operating system. 
    Today, a solution for your printer is not available for Mountain Lion. However, a driver update will be available in 2013 .
    HP aspires to provide the most up-to-date information on HP drivers and software. Please check back for updates.
    Has anyone found, or know of, a work-around for this issue?  I have not been able to use this printer from my MBP since upgrading.  Once I disovered this limitation, I defered upgrading our iMac to 10.8, so that I am able to print from at least one of our computers.   Appreciate any solutions anybody may have found to this limitation.  It seems unfathomable to me that HP could have a mainstream product like this NOT supported in 10.8, especially since the operating system has been on the market for many months.  And to state that the driver will be "available in 2013" is grossly unacceptable.  We'll be on 10.9 by the time they get around to updating their drivers for 10.8.

    Latest drivers:
    http://support.apple.com/kb/DL907

  • App Store Doesn't Have a Badge for Available Updates

    I'm certain there's an update available, at least one, and there's not a badge for this update on the App Store icon on the dock, isn't there supposed to be a little "1" notifying me of an available update?
    Ideas anyone?

    Ok, well, Twitter tweeted that their official Mac app had an update, I had specifically chosen to not update until I posted this.
    This isn't the first time this has happened, in the past, when there were two updates available that I recall that time, it still didn't show a badge.
    I have the same problem with the app store on my iPhone, my iPhone, however, didn't always have the problem.

  • I-tunes doesn't have movie tab for Apple TV

    I have a Mac Book which is paired with my ATV and I share a Mini with ATV. My MacBook has a summary, movies, and photos tab, but my Mini only has a summary and photos tab. This obviously does not allow me to transfer a movie that has been rented on my Mini to ATV. Why is this and how do I fix it?

    You can only have one 'synced' computer which can transfer video to AppleTv
    The rest will be streaming only
    You'd think there might be more flexibility for rentals, but really it's best for you to rent or the AppleTV direct or on the synced computer. Also I think 'moving' rentals from one device to another is not handled by the usual AppleTV tabs.
    From memory there's options under your rentals (maybe right click on the rental) to allow transfer to iPod etc - your AppleTV might be listed therer too.
    If not - Can you manually copy the movie from the current library to the synced one?
    You'll only be able to use it on one device at a time.

Maybe you are looking for