PU12 run some employees missing in the file created

Hi,
In the file that is created during the pu12 run today generated only 50 employees. But when it was run 2 days back with the same variant, the records exported were 266.
What could be the possible reasons for these many missing pernrs.
Thanks & Regards,
Soumya.

Hi,
Previous run gave you 266 result and current one 50 result. The possible result may that for those 50 pernrs some records have been modified. Basically PU12 generates output based on some modification on employee records. If you check then you will find that after running 1st time with the same variant when you execute the PU12 with same variant then some modification was done on those 50 pernrs record. rest pernrs record was not modified. This may be one of the reason.
Thanks & Regards,
Sandip

Similar Messages

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

Records are missing in the File which XI has placed in Target FTP server

Hi All,
I have a scenario where in XI is transfering the files from ECC to Target System . No transformation required here . I am using AAE to run this scenario.
Issue i am facing here is that i can see few records missing in the File which XI had placed in the Target system FTP server . Same file if i check it in archive folder of ECC (which XI has archived after picking the file), complete set of records are present for the same file.
Need your inputs please....
Note : XI is using AAE to transfer the files and no mapping . Also i tried to check out the audit logs in the channel monitoring . Unforutanely i was not able to see the logs to check the bytes that was transferred while readng and writing the file . Sometimes i have faced audit logs issue in PI 7.1
Regards
Vinay P.

Please use temporary name scheme
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/content.htm
hope this helps
regards
Ninad

Why is the import tab missing under the file tab?

Why is import missing under the file tab? I want to import bookmarks etc. from Safari into Firefox.

You can find the Import menu entry in the Bookmarks Manager (Library)
*Bookmarks > Show All Bookmarks > Import & Backup > Import Data from Another Browser
*http://kb.mozillazine.org/Import_bookmarks

Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

How to fix this problem
"Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
I believe your problem will be something like that.

Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media

Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media Pending screen. What the? Have to cut this stuff soon! Wont even import into Media Encoder. Says there are no usable streams in the media! Just saw a podcast title about stress in the editing business. Better listen to the one! Any help would be most appreciated. J.

Copy ALL contents of SD card to a folder on edit hard drive. not just video clips, everything. Then in Premiere, import using Media Browser (tab at lower left of Premiere screen). This usually does the trick. There is metadata contained in the SD card files that is needed, not just the video clips alone.
Thanks
Jeff Pulera
Safe Harbor Computers

"The upload has failed. There was a problem running a virus scan for the file." any ideas???

"The upload has failed.
There was a problem running a virus scan for the file. "
This is the message i get when tryng to update
any ideas?

Error: "svr.VirusScanExecutionError"
An intermittent problem with acrobat.com's underlying virus scan component causes this issue. This issue happens occasionally on a small number of server instances.
The solution is to update the article again. Trying again typically routes you to a different host in the server array.

HT1918 I cannot access files I uploaded from an old computer. The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address?

I cannot access files I uploaded from an old computer. The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address and username?

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Firefox wont now start under Windows8 - it thinks it is open - I can not uninstall as it thinks firefox is running - I can't delete the files manually either

Firefox was working ok my wife's computer for the last month under Windows 8. We just had to reinstall MS Office and now Firefox will not open. I tried deleting it through Control Panel, but that fails - it thinks the application is running. I tried deleting the files manually, but again failed as it thought a file was open. Helper will not open either.

Have you tried shutting down and restarting Windows since this problem started? Problems with uninstalling can be caused by a backup of deferred updates that Windows clears when it restarts.
But... to return to the problem of Firefox not starting, what are you seeing: Does it display an error message? Does it crash immediately?

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix

I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix issues I had fixed in the single files. I need suggestions on what else can be done if any. Using Acrobat pro XI.

Out of habit, I tend to combine PDF files in the Page Thumbnails pane by right-click then "Insert Pages" -> "From File". For me, this preserves the tags from both documents, although the tags may have to be moved into the right location (if I recall correctly the tags for the inserted pages get put at the end of the tag structure, regardless of where the pages are inserted), If I first put the tags for the document to be inserted inside a container tag like Section, it makes the process easier. Moving that set of tags to the right place is the only re-fixing that I recall having to do. What behavior are you experiencing?
a 'C' student

How to view the File created against the Transport Request in ASCII format

Hi all,
We have a requirement where in the file created against the Transport reauest and its content should be viewed in ASCII format.
Experts do you have answer for this.
Is thers any method to work out.
Thanks in advance.
Every usefull answers will be awarded points.*********

Hi Anji Reddy,
Thanks for your reply.
Let me clear my querry.
when we create a program in se38 and save it in a zxxxx package then it will create a transport request. The Content of TR i mean is not the Program name or the object list in the TR. The content i mean here is the abap code written in the program. which will be stored as a file in the server. when we open this file it will give the SAP format. Which i want to view in ASCII format.

Payment details are missing in the file generated by driver program RFFOJP_T

Hello Friends – We send the payment files generated by driver program RFFOJP_T (Payment Medium Japan - Domestic DME (and Bank Charges)). Now, we see issue that couple of payment details are missing in Output file/AL11.
If 20 payment documents are created in F110, only few are shown in AL11/Output file.
Can you pls give me a little idea on how to analyze this issue.
Thanks

Hello Friends - Can you please give me a little idea on what could be the reason for the below issue.
We are using the program RFFOJP_T and when payment file is generated, some of the payment details are missing.
I have executed payment run for 5 payments and only one 1 has come to the file and below 4 are missing.
The following payment documents/payment orders were not updated
(Result of the payment document update)
    CoCd Payment document/Payment order
    9770 1400001524
    9770 1400001525
    9770 1400001526
    9770 1400001527
The accompanying payment media have not been generated
>
> Overview of the files generated (DME)
> Name / File name
Thanks

Why does some artwork embed into the file, but not others?

Hey everyone.
I'm running iTunes 11.3.1. I'm incredibly obsessive about having organised files and one thing in particular I want is album artwork embedded into the music file itself, not just on iTunes. The problem I have is that the artwork will embed for some, and not for others - even if I use the exact same methods:
I use the following for getting HQ covers: http://bendodson.com/code/itunes-artwork-finder/index.html
I will then click on the high resolution version, copy it to clipboard, command-i to get info of the individual tracks and manually paste the cover into every track on the album. When I then go into Finder to see if it has embedded, I find that for one album it has worked perfectly; but although I use the exact same method, it won't work for another album even if they're exactly the same file type.
(I know I can save myself time and select all the tracks, command-i and paste the artwork to do it in one go - but I find I get just as much of a mixed bag. I.e. sometimes it works, and sometimes it doesn't.)
I am literally at the end of my tether and I can't figure out what I need to do differently, any help is appreciated. Thanks.

I have encountered exactly the same problem and frustration :-)
Although I can't offer a definitive reason why, I did notice that the problem tracks typically had a higher resolution image attached in iTunes. I have used Preview to reduce the resolution to 600 x 600 (standard iTunes size) and it worked.
Now, I have no idea if it was the resolution or the fact that I was re-saving a fresh version of the JPG (which may have stripped out whatever was causing the problem), but the process of tweaking the file to 600 x 600 and re-saving has worked for me.

Why are some text missing from the right side of a page I send to my printer? Thanks

Why is some of the text missing on the right side of a page I send to my printer?

I came across something similar recently where it printed the left hand side only!
If I want to print an email, instead of File > Print ( does not print properly ) I click on the print icon on my email webpage ( do not use applemail and access gmail direct) which then takes me to print preview showing the complete email which prints ok.
Some webpages ( File>Print) do not print properly and some do. Those that do not generally have their own printer icon (path) that needs to be clicked on.
Maybe something to do with encryption but don't know.
Hope this helps in some way.

PU12 run some employees missing in the file created

Similar Messages

Maybe you are looking for