Puase dialing doesn't work, puase dialing doesn't work

I have inserted "pause" but it doesn't work. 

So, when you try to use voice dialing it never says "say a command..." ?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

  • When I attach my battery grip to EOS 50D, the main dial doesn't work.

    When I attach my battery grip to EOS 50D, the main dial doesn't work. If I remove my battery grip.the main dial works fine. Has anyone else had this problem?

    It may be the result of the switch on the battery grip being ON. If you use the camera in Portrait mode you turn that switch on to make the shutter button on the grip active & maybe it also switches the wheel function too.
    "A skill is developed through constant practice with a passion to improve, not bought."

  • My iPods sound is iffy, for lack of a better word. At times it's fine, but most the time it doesn't work. The volume dials don't show up either. What's wrong with it and how should I fix it?

    My friend said the speakers might be blown, but the sound still works at times. And I'm sure if he speakers were broken then the volume dials would show up as well. So I need help figuring out whys going on.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • My keypad works when i dial a call then when I'm asked to dial extention the keypad doesn't work

    My keypad works when I dial a call but when asked to dial extention the keypad does not work

        tfoxx,
    We want to make sure that everythig is working on the device without any kind of issues. When did you notice that the dial pad went away once a phone call is made or received? Do you have a screen protector on the phone that covers the sensors on the device? Please keep us posted.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • HP 860 Machine has dial tone but fax doesn't work

    I have dial tone but cannot send or receive faxes. Get message on machine "unable to send or receive faxes".

    Hi @larsfal39 ,
    I see by your post that you can't send or receive a fax. I would be happy to help you.
    Here is a support document for troubleshooting: Cannot Send or Receive Faxes.
    Sorry for all the questions, but it will help to resolve this issue quicker. Please provide the following:
    Are you able to send and receive faxes?
    Did the fax test pass?
    What type of connection do you have? (Analogue, DSL, Cable Modem)
    Are you using a filter?
    Are you using the 2 wire fax cable?
    Do you have distinctive ring set up on the line?
    Is there any voice mail set up?
    Do you have a answering machine? (Where is it connected to)
    Where is the fax cable connected to? (modem, wall jack)
    Is there a phone also connected the printer?
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hey Siri doesn't work on my Apple Watch. I have to push the dial to get Siri to respond

    I've tried resetting my watch, speaking closer to the watch face, and asking my question right after saying Hey Siri but Siri does not respond or acknowledge my voice. I can sometimes use Siri if I push the dial and haven't had problems using it within messages yet.
    Anyone have a suggestion?
    Cynthia

    I assume you know the watch face needs to be illuminated for Siri to work.

  • Can I update plugin on dial-up - check & update page doesn't work

    I am on DIAL UP as I live in remote area. Got message that Flash plugin was disabled because it is out of date. Tried to update and told plugins BLOCKED FOR MY SAFETY, then told to go to "Plugin Check & Update" page. The "Checking Mozilla on Status of Your Plugins" circle/hourglass has been going round for almost 2 hours - nothing happening. Last time I had to pay computer guy $50 to update stuff. I can't afford this every other month. Any suggestions?

    Thanks. I ended up taking my PC to my daughter's - she's on high speed - and I downloaded the updated versions of everything I needed. My Dial-up is too slow (26.4 kbps YIKES!) to do that... bummer. So guess I'll just have to bring my PC to town periodically to do updates.

  • N8 dialing by name doesn't work

    Hi, since updating the sofware (knew I shouldn't have done that!) I can no longer dial people in the contacts by name, it is like the phone is searching a different contact list than before but I only have one contacts list.  Please help, I loved this feature and miss it very much!

    It's possible that feature got disabled. At the dialler screen, tap the application menu button bottom right -> Contact search -> ensure it's set to On.
    Hope this helps,
    Francois

  • Satellite L20: Modem doesn't get dial tone

    Hi,
    My L20 notebook doesn't get a dial tone whem I'm trying to dial up. On antoher pc the connection works well, so I'm sure that the line has a dial tone and that the other computer is 'listening'.
    I also tried to uncheck the 'wait before dial tone' option, tried to remove it from the Device manager, but after this all the modem still doesn't work. The current driver that is installed is version 7.20.00.00, because I can't install the latest version (7.25.00.00) (setup doesn't finish well, no specific error is given).
    Does anybody knows what to do??

    Open the system control panel and choose the Phone and modem options.
    There check the Modems tab. The modem should be placed in the list.
    If not, so you need to install the modem driver.
    Check the Modem function by pressing the "Query Modem" button.
    If the Modem Information window contain a list of AT commands (including ATI2, ATI3, ATI4 etc.), then the modem is correctly installed. The ATI5 command ends in with the number for the selected Regional settings (for example Germany = 06).
    To change the Regional Setting please use the Toshiba Internal Modem Region Select Utility.

  • UCCX 9.0 outbound progressive dialer doesn't

    Using UCCX 9.0.2-10000 in the lab.  Attempting to set up demo for customer for next week.
    I have the outbound dialer set up, but it's not attempting to make a call (never hits the gateway).  In pulling the MIVR logs, I'm seeing something strange (see below).  I tried using the new improved and completely impossible to use bug toolkit (why can't they EVER leave things alone that work, but that's another discussion for another day).  I can't locate any information about a bug like this.  The input file is straightforward enough.  But it will not outdial via the sip gateway. 
    I was going through the outbound troubleshooting guide, and when looking at the Sample MIVR Log Analysis, I was looking for it to retrieve the records as shown in the first step in that document.  It never seems to get that far.  Any input appreciated. 
    1264690: Oct 11 17:06:36.925 EDT %MIVR-CFG_MGR-7-UNK:ConfigManagerImpl-getAll(): given query : .DialingListConfig#3[campaignID=3?EQUAL,callStatus=6?EQUAL]  
    1264691: Oct 11 17:06:36.925 EDT %MIVR-CFG_MGR-7-UNK:ConfigManagerImpl-getAll(): query[0]: .DialingListConfig#3[campaignID=3?EQUAL,callStatus=6?EQUAL]  
    1264692: Oct 11 17:06:36.925 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery) RepositoryAccessors in list = 2  
    1264693: Oct 11 17:06:36.925 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery): RepositoryAccessor type = com.cisco.crs.cluster.config.ClusterConfig  
    1264694: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery): RepositoryAccessor type = java.lang.String  
    1264695: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery):Try to get the default accessor  
    1264696: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery)::found a RepositoryAccessor  
    1264697: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:DBAccessor.get(query))  
    1264698: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:Schema class = com.cisco.crs.outbound.DialingListConfig  
    1264699: Oct 11 17:06:36.926 EDT %MIVR-LIB_JDBC-4-JDBC_LOG_MONITOR:JDBC log: message=Cannot join transaction: do not override hibernate.transaction.factory_class,error_desc=null  
    1264700: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-UNK:No objects found: Exception=com.cisco.config.ConfigNotFoundException: Query returned 0 results  
    1264701: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION:com.cisco.config.ConfigNotFoundException: Query returned 0 results  
    1264702: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.impl.dbaccessor.DBAccessor.get(DBAccessor.java:530) 
    1264703: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.impl.ConfigManagerImpl.getCIRecords(ConfigManagerImpl.java:1438) 
    1264704: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.impl.ConfigManagerImpl.getAll(ConfigManagerImpl.java:534) 
    1264705: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.Config.getAll(Config.java:1147) 
    1264706: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.Config.getAll(Config.java:1052) 
    1264707: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.crs.outbound.DialingListConfig.getDialingListRecords(DialingListConfig.java:499) 
    1264708: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.wf.subsystems.outbound.ReadContactsThread.readCampaigns(ReadContactsThread.java:473) 
    1264709: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.wf.subsystems.outbound.ReadContactsThread.run(ReadContactsThread.java:153) 
    1264710: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.executor.impl.ExecutorStubImpl$RequestImpl.runCommand(ExecutorStubImpl.java:690) 
    1264711: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.executor.impl.ExecutorStubImpl$RequestImpl.run(ExecutorStubImpl.java:486) 
    1264712: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.executor.impl.ExecutorStubImpl$RequestImpl.run(ExecutorStubImpl.java:762) 
    1264713: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.executor.impl.ThreadStubImpl$RequestImpl.run(ThreadStubImpl.java:570) 
    1264714: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.util.ThreadPoolFactory$ThreadImpl.run(ThreadPoolFactory.java:853) 
    1264715: Oct 11 17:06:36.930 EDT %MIVR-SS_OB-7-UNK:Error retreiving config object   
    1264716: Oct 11 17:06:36.930 EDT %MIVR-SS_OB-7-UNK:ReadContactsThread: readCampaigns: campaignBatchSize after CALLBACK+PENDING+RETRIES=0 for campaignID:3  
    1264717: Oct 11 17:06:36.930 EDT %MIVR-SS_OB-7-UNK:ReadContactsThread: END  
    1264718: Oct 11 17:06:37.374 EDT %MIVR-SS_OB-7-UNK:Dialer:printLicenses() total_working_resources:0, OB_contacts_in_progress:0   1264690: Oct 11 17:06:36.925 EDT %MIVR-CFG_MGR-7-UNK:ConfigManagerImpl-getAll(): given query : .DialingListConfig#3[campaignID=3?EQUAL,callStatus=6?EQUAL]  
    1264691: Oct 11 17:06:36.925 EDT %MIVR-CFG_MGR-7-UNK:ConfigManagerImpl-getAll(): query[0]: .DialingListConfig#3[campaignID=3?EQUAL,callStatus=6?EQUAL]  
    1264692: Oct 11 17:06:36.925 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery) RepositoryAccessors in list = 2  
    1264693: Oct 11 17:06:36.925 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery): RepositoryAccessor type = com.cisco.crs.cluster.config.ClusterConfig  
    1264694: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery): RepositoryAccessor type = java.lang.String  
    1264695: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery):Try to get the default accessor  
    1264696: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:getAccessor(ConfigQuery)::found a RepositoryAccessor  
    1264697: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:DBAccessor.get(query))  
    1264698: Oct 11 17:06:36.926 EDT %MIVR-CFG_MGR-7-UNK:Schema class = com.cisco.crs.outbound.DialingListConfig  
    1264699: Oct 11 17:06:36.926 EDT %MIVR-LIB_JDBC-4-JDBC_LOG_MONITOR:JDBC log: message=Cannot join transaction: do not override hibernate.transaction.factory_class,error_desc=null  
    1264700: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-UNK:No objects found: Exception=com.cisco.config.ConfigNotFoundException: Query returned 0 results  
    1264701: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION:com.cisco.config.ConfigNotFoundException: Query returned 0 results  
    1264702: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.impl.dbaccessor.DBAccessor.get(DBAccessor.java:530) 
    1264703: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.impl.ConfigManagerImpl.getCIRecords(ConfigManagerImpl.java:1438) 
    1264704: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.impl.ConfigManagerImpl.getAll(ConfigManagerImpl.java:534) 
    1264705: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.Config.getAll(Config.java:1147) 
    1264706: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.config.Config.getAll(Config.java:1052) 
    1264707: Oct 11 17:06:36.929 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.crs.outbound.DialingListConfig.getDialingListRecords(DialingListConfig.java:499) 
    1264708: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.wf.subsystems.outbound.ReadContactsThread.readCampaigns(ReadContactsThread.java:473) 
    1264709: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.wf.subsystems.outbound.ReadContactsThread.run(ReadContactsThread.java:153) 
    1264710: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.executor.impl.ExecutorStubImpl$RequestImpl.runCommand(ExecutorStubImpl.java:690) 
    1264711: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.executor.impl.ExecutorStubImpl$RequestImpl.run(ExecutorStubImpl.java:486) 
    1264712: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.executor.impl.ExecutorStubImpl$RequestImpl.run(ExecutorStubImpl.java:762) 
    1264713: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.executor.impl.ThreadStubImpl$RequestImpl.run(ThreadStubImpl.java:570) 
    1264714: Oct 11 17:06:36.930 EDT %MIVR-CFG_MGR-7-EXCEPTION: at com.cisco.util.ThreadPoolFactory$ThreadImpl.run(ThreadPoolFactory.java:853) 
    1264715: Oct 11 17:06:36.930 EDT %MIVR-SS_OB-7-UNK:Error retreiving config object   
    1264716: Oct 11 17:06:36.930 EDT %MIVR-SS_OB-7-UNK:ReadContactsThread: readCampaigns: campaignBatchSize after CALLBACK+PENDING+RETRIES=0 for campaignID:3  
    1264717: Oct 11 17:06:36.930 EDT %MIVR-SS_OB-7-UNK:ReadContactsThread: END  
    1264718: Oct 11 17:06:37.374 EDT %MIVR-SS_OB-7-UNK:Dialer:printLicenses() total_working_resources:0, OB_contacts_in_progress:0  

    Upgraded to the latest build, but seeing exactly the same behavior.  However, continued playing with it, and the mystery cause is at least partially solved.  This is mostly a documentation problem.  From the documentation:
    DialTime field is used to specify the time to dial a number for individual contacts on the current date. The format to be used for this field is HH:MM. For example, to specify the dialing time as 08:25 am, the dial time field value should be 08:25 and for 03:45 pm, the dial time field value should be 15:45.
    Here's the thing.  If you put the colon character ":" in the middle of the time as a time separator, that breaks it.  Instead, enter the time as a 4 digit number in the HHMM format using 24 hour time, and it will work (or just don't use this field). 
    The same documentation also mentions the ability to have up to three phone numbers in the input files.  However, if you look at the contact import screen, it doesn't reflect this in the drop down (it offers only "Phone1") as a field choice.  My suspision is that this should actually just be "Phone", and that I can have up to 3 of them, but definately there is a huge disconnect between the documentation and how this actually works. 
    I can't mark my own reply as a solution, but there it is for anyone who is interested.

  • When I make a call or a call comes in on my LG G2 it doesn't show the dial pad or call in progress just a blck screen??????????Does anyone know how to fix it.

    when I make a call or a call comes in on my LG G2 it doesn't show the dial pad or call in progress just a blck screen??????????Does anyone know how to fix it.

        tfoxx,
    We want to make sure that everythig is working on the device without any kind of issues. When did you notice that the dial pad went away once a phone call is made or received? Do you have a screen protector on the phone that covers the sensors on the device? Please keep us posted.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • HT1460 ipod doesn't respond to pressing dial

    lately my ipod doesn't respond to pressing the dial as if to go to the next or previous song, or to back out further to the main menu.  Sometimes it works, most of the time it doesn't.  It's hard to believe the dial has worn out - I've barely used it. 

    do a reset.. PUSH AND HOLD the menu button and the middle button at the same time for 10 seconds.. it may take a few trys.

  • My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?

    My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.

    Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case.  If you still can't hear the tones go into your settings>sounds and make sure the options are on. 

  • HT201401 Phone doesn't go blank during call - ear/face dialing during call

    Help! My Iphone4 doesn't go blank during calls, resulting in ear/face dialing.  I've had this problem since I took it out of the box.  Anyone out there with this problem that was able to resolve it?

    There is a proximity sensor near the front receiver/speaker on the front of the phone the is supposed to sense when you have raised your phone to your face during a call and turn off the screen.  Your symptoms indicate there is something wrong with the proximity sensor on your phone.  Try cleaning or removing your screen protector to be sure that isn't the culprit.  If it isn't, make an appointment with the genius bar at a nearby Apple store to have it looked at.  (If you feel it was related to iOS 6, you could try restoring your phone first to see if that would help.)

  • UCM Routing Client doesn't appear when configuring a Dialed Number in Configuration manager

    Dear all,
    I am implementing a UCCE system version 9.0
    When I am trying to configure a Dialed Number in Configuration Manager, the Routing Client field is empty, it doesn't show the UCM option.
    Kindly can someone help me on this issue, what should I check? is there something missing in the configuration?...
    Any help would be greatly appreciated.
    Thank you in advance.
    Lara

    ICM Config Manager > Tools > Explorer Tools > PG Explorer
    Do you see a PG and PG Peripheral for UCM? If so, select the Peripheral and go to the Routing Client tab. I've attached a picture of what a healthy functioning PG and PG Peripheral would look like from the Routing Client perspective. 

Maybe you are looking for

  • Safari will not open at all

    I had been having the same problem as some of the other posters--Safari was excruciatingly slow, spinning beach ball, and so forth, rendering my computer almost unusable. I repaired permissions, changed the DNS settings as recommended in other posts,

  • How to burn boot cd in 10.7.5?

    I have numerous apps crashing upon launch and wish to run disk utility and repair the disk.  I have an older MacBook that cannot run Mountain Lion.  I'm running 10.7.5 and wish to create a bootable CD with disk utility on it so that I can repair the

  • Host Name Verification problem

    Weblogic (8.1+) Host Name Verification is failing when I think it should succeed. I've read the docs but it doesn't sounds like there's an easy way to get it working other than to disable host name verification all together - is there? I get: <Warnin

  • Apps. are not updating in 3.0

    My apps need to be updated on my phone, when I go to update, something new comes up about the apple store agreement. Keep hitting OK,OK,OK,OK depending on how many apps you need to update. It starts loading your apps, then stops and back to the agree

  • DME for checks...

    Hi all, I have a Internation Payment Medium on Checks... I had just made a payment run... When i tried, to rerun the payment again... a message prompts out saying that my previous check is in the check file... Do you know where or what tcode that i c