'Public' Active Directory account no longer works w/Tiger?

We have approx 20 public Macs that all log onto our Windows 2003 server using the same Active Directory account - 'Public'
This has worked fine until Tiger - Now when we attempt to log onto one of our network drives with this account name I'm told by a pop-up window that the account is either disabled or I've put the password in incorrectly.
Can anyone confirm if 'Public' cannot be used by a user on Tiger? Is it exclusively for the OS?

Ran accross this in help file...
"Mac OS X 10.3 or later: "Invalid user name and password combination" Message When Using Active Directory
When binding a Mac OS X client computer to Active Directory, the account entered is not validated (resolved) at that time. It is used as entered. If entered incorrectly, you will see an alert message later.
Symptom
After configuring the Active Directory Directory Access plug-in, an alert message appears at the client computer that says "invalid user name and password combination."
Products affected
Mac OS X 10.3 or later
Solution
This happens when an incorrect name and/or password is entered, including a username entered with incorrect syntax.
The user's login name (also known as "PrincipalName") is required when binding a computer to Active Directory.
The user can also use the short part of the login name (such as "virginia"). The typical syntax of a login name is similar to "[email protected]".
Note: If the user's login name has been modified from the default "[email protected]", then the default login name must be used. The modified login name (such as "[email protected]") cannot be used."

Similar Messages

Active Directory accounts no longer connect to Server

I administrate a small office network.
We have a Windows 2000 Server with active directory and a Windows 2003 Storage Server Appliance. (From Iomega)
After upgrading to 10.4.8 (it seems), our Mac integrated to the Active Directory has had problems connecting to the storage server.
When attempt to connect to smb://storage (the 2003 server appliance) we get a Error code -36 -- could not be read or written.
This only happens when logged into an AD account. Local accounts on the machine access the server as normal.
Also of note, the AD accounts have no problems accessing shares on the 2000 server.
Any ideas why this is only effecting AD accounts and a solution?

There are a couple of things you can check...
1. Check to make sure that the SMB signing option is disabled for the Windows 2003 Storage appliance. This can be done in the local group policy on the Server.
2. If it is a storage appliance, you should be able to run Microsoft's Services for Macintosh. This would give you AFP on the file server - a potential way to eliminate the need for using SMB on the Macs.
3. Use a 3rd party software on the Windows 2003 Storace Server called ExtremeZ-IP by Group Logic. It is a full featured AFP/IP file server for Windows (replacing SFM). We have an HP DL380 NAS device on our network (running Windows 2003 Storage Edition) that has 1.5 TB of storage for our MAc users. We use ExtremeZ-IP... I have nothing bu great things to say for it...

Snow leopard Active directory account taking a long time to verify password

Hi,
My mac is configured to use an active directory account (windows small biz server 2008), i configured a mobile account when i was still under leopard and it was working fine. Since i upgraded to snow leopard i started experience the following issues:
When i am out of the office (not connected on the domain), logging in to my mac take about 5min after i type the password, same thing when the mac awakes from sleep, i type my password and it says verifying password and this takes about 5 minutes to complete! Another issue i am experiencing is that whenever i put my mac to sleep, when it wakes up most of the running applications crash and i have to restart them. i was hoping 10.6.2 would fix that but it didn't.
Sorry for the long post. Thank you in advance for your support!

I guess we will have to wait for someone to give us a clue, or for apple to release 10.6.3 .

How to avoid duplicate DN exception when creating Active Directory Account

I am using OIM 9.1.0.2 to provision Active Directory accounts.
I run into issues when the DN of the user to be created already exists and I would like to know if anyone has some logic I can use to generate a different DN for new user by adding a number or something like that to the DN
Here is an example.
User 1 exists already and their DN: cn=john smith, cn=users, dc=company,dc=org
New user joins the company and his name is also john smith and he has no middle name: so system attempts to create his account as cn=john smith, cn=users, dc=company,dc=org
how can I accomplish this by making the account say cn=john smith_1, cn=users, dc=company,dc=org

855640 wrote:
I run into issues when the DN of the user to be created already exists and I would like to know if anyone has some logic I can use to generate a different DN for new user by adding a number or something like that to the DN
There are two different questions:
1. How to generate a sequence of candidates for the name attribute
2. How to check if a record with the given name candidate already exists in the Active Directory, and hence try the next candidate from the sequence.
The answer for the first part is usually defined by the policy existing in your organization, in the simplest case you can append sequential integer numbers to the end of the original name.
The answer for the second question is not so simple if you use are provisioning with MSAD connector.
There are two places you can put the check:
-- in the pre-populate adapter for the UD_ADUSER_COMMONNAME field
-- in the adpADCSCREATEUSER event handler, which is responsible for new AD user record creation.
Both cases need some coding, since you have to obtain the AD connection and search AD for matching records.
Pros & cons
Placing check code in the pre-populate adapter:
Pros:
the result is visible in the form, administrator can change the pre-calculated value if he wishes
Cons:
you need to have all access to connection parameters, and establish one extra connection
this is not the way OIM is supposed to work :-(
Placing check code in the AD user creation task:
Pros:
you have all access to connection parameters, and open a connection here anyway
Cons:
the result is not present in the form, so no way for manual interaction by administrator here
BTW: this problem is not only related to DN generation, some other AD attributes (e.g. sAMAccountName, mailNickName, userPrincipalName, mail) should be unique in the AD domain scope.
Edited by: madhatter on Sep 7, 2012 12:02 AM

Time Machine Backup using Active Directory account

I have two macbook pros (running 10.6.4) using Active Directory accounts and I am trying to backup them up to an Active Directory integrated XServe (running 10.6.4) with a shared Time Machine backup point. I open Time Machine preferences, select the disk, entering username and password, and it starts trying to make the backup disk available. However, it quits and gives me the following error - the network backup disk could not be accessed because there was a problem with the network username and password. The username and password are correct. I have tried three different accounts and they all produce this error.

This happened to an issue AFP. I had AFP authentication set to use Kerberos. I changed it to use "Any Method" and it is working properly.

After activating iCloud "video" no longer works on my iPhone and iPad. How can I reactivate "video"?

After activating iCloud, "video" no longer works on my iPhone and iPad. How can I reactivate "video"?

Welcome to the Apple Community lynntice.
Which part of video isn't working, playback or recording, could you please provide a little more information.

I forgot my password for my iTunes account and the email that is associated with my iTunes account no longer works. How do I recover my password and be able to change my security questions?

I forgot my password for my iTunes account and the email that is associated with my iTunes account no longer works. How do I recover my password and be able to change my security questions?

Forgotten Security Questions / Answers...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers

ActiveSync mail/contacts/calendars removed after Active Directory account is locked out?

Hey guys,
Wondering if anybody has seen an issue like this. This is a new Exchange 2010 deployment (8+ CAS servers) and the devices are all iPhones/iPads running the latest version of iOS (7.1.2). The CAS servers are behind a load-balancer.
Basically when a users' Active Directory account is Locked in AD (either manually or by entering the wrong password) their ActiveSync Contacts, Calendars and all Mail folders (except the Inbox strangely!) will be removed from the iOS device within a few hours. So an account might get locked out at say 6pm, if left locked out by the next morning the ActiveSync account will still be setup on the device as normal, but everything is gone except the mail in the Inbox. If a user has an iPad and iPhone both will be blanked.
The behaviour is similar to what is documented here - iOS: How to mitigate a full sync or reload of Exchange account data - however the Exchange servers are not issuing HTTP500 errors as we have captured logging during the window where the device blanks itself.
Any thoughts would be appreciated!
Thanks!

Hello,
which event ids are shown in the event viewer from the DCs? Or maybe locally also some errors are locked that give some more details.
If this happens it sounds personally for me that Java is the problem. Have you already opened a call at
https://community.oracle.com/welcome ?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Active Directory account lockout from OS X Server

I'm looking for assistance in tracking down why our 10.9 Mac server is constantly trying to use my Active Directory account. I changed my password a week ago and have been getting locked out constantly, and it appears the lockouts are coming from invalid password attempts from this OS X server. However, I don't know why the server would be using my AD credentials since I login to the Mac with an admin account and not my own. The only thing I can think of that may have used my AD credentials is connecting to a network file share at some point in the past, but I wouldn't have saved the credentials and it shouldn't be auto-mapping the share. The Mac itself is bound to Active Directory too.
I checked the Login Items and there is nothing there. I also reset the keychain to defaults and that didn't help. Does anyone else have any ideas for me to try to narrow down what the OS X server may be trying to use my credentials for?

So I'm going to guess I'm the only one that's ever had this issue...
Further digging with Wireshark shows that the OS X server is indeed issuing bind requests using my old AD account credentials multiple times per minute. I tried unbinding and rebinding, but that didn't help. The requests also start right away after a reboot, so whatever is using my credentials is doing so prior to any user logins on the server. Now I'm trying to track down what is actually issuing these requests on the server
In a span of a few seconds the machine issues three bind requests. The first is
bindRequest (1) "[email protected]" simple
Followed by
bindRequest (1) "<ROOT>" sasl
then
bindRequest (2) "<ROOT>" sasl
Anyone have an idea for me as to how to track down where my user account comes into play? It wasn't used to bind the machine to AD, I didn't see it anywhere in the keychain, and I only have a few apps running on the server, none of which use AD authentication or would request binding.

Creating Active Directory Accounts for vSphere 5.1 Services

To set up the management pieces of vSphere, I need to have an account or accounts created in Active Directory. I need to determine how many to create and what permissions they need.
In Single Sign on Server, I need to choose an account that vCenter server will use when it connects to SSO. I can use the default admin@system-domain. Or I can add an account that is configured in Active Directory. Or, I can also use an active directory group instead of an individual user. What is the best way to do this and if I use an AD account, what permissions does it need at the domain level and at the local level on the Single Sign on Server? (I'm using multisite mode, so I can't use local accounts)
In SQL Server, I need to choose an account to use for the SQL server service. Should this account be an active directory account or a local user account? If so, what permissions should be assigned to the account in Active Directory and what permissions should be assigned to it on the local machine? What AD group, if any should it be a part of? What local permissions does it need?
In vCenter Server, I need to choose an account to run the "vCenter Server Service" in. Is it best to use the default "system" account or to use an account from Active Directory, or a local account?
I'm trying to get a big picture of an AD account/group strategy to use that covers the main management pieces of vSphere - vCenter Server, Single Sign on, Inventory Service, Web Client Services.
For example, create one group called "vSphere Services", then create separate accounts for each management piece, and assign them specific permissions on specific systems. Or create separate groups for each management piece and assign permissions to the groups. Is it better to consolidate some of these user names or split them out? Any experiences / suggestions welcome. Thanks.

Hello,
For general services I use a service specific account within AD. This was before SSO and I use the same after SSO. SSO is used by only two services that I know about at the moment (Inventory Service and perhaps vCloud). However, there are many other service accounts that should be created. You want one account per service and I use AD for this, this way I can create a service account group and give it the appropriate roles and privileges. FOr example I have service accounts for:
VMware View
XenDesktop
vCops
HPSIM
Solarwinds
VMTurbo
NetApp
etc.
One service, one service account, each with either a general role or custom role depending on access requirements to vCenter.
For SSO, I to am waiting on general information, but I set mine up fairly basically to cover only those resources that make use of SSO. Since the vast majority of items do not use SSO, the rule still applies. Once SSO is supported by more than one or two tools, you still need to maintain that separation.
So I say yes, tie SSO to AD and do everything in one place, unfortunately, that is not very clear, or at least was not to me and these SSO issues are either beng fixed, documented, or both.
Best regards,
Edward L. Haletky aka Texiwill

Powershell Active Directory Account Expiration Script

I am putting together a script that creates a user account in AD, sets the password, adds groups, etc. The part I am having problems with is when the user selects the Contractor employee option and is prompted for the expiration date of the AD account.
The script will create the account, but the expiration date is not set in AD. Any suggestions?
Here's the code:
#Script to create Active Directory account
#Add the Active Directory Module if not already present
if (-not (Get-Module ActiveDirectory))
Import-Module ActiveDirectory -Force
Write-Host ""
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host ""
Write-Host "Computer Access"
Write-Host "Create Active Directory User Script"
Write-Host "PowerShell 3.0"
Write-Host "Version: 1.2"
Write-Host "Date: 4/14/2014"
Write-Host "Author: "
Write-Host ""
Write-Host "Please review the created Active Directory Account" -ForegroundColor Red -BackgroundColor Yellow
Write-Host ""
Write-Host "Base Business Unit Group Memberships are added only" -ForegroundColor Red -BackgroundColor Yellow
Write-Host ""
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host ""
Write-Host ""
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host "Creating Active Directory Account" -ForegroundColor Yellow
Write-Host "======================================================" -ForegroundColor DarkYellow
Write-Host ""
#Specify the target OU for new users
$targetOU = "OU=Personnel,OU=ETA,DC=eta,DC=state,DC=tx"
#Find the current domain info
$domdns = (Get-ADDomain).dnsroot # for UPN generation
#Set Account Variables
#Set Username with Dialogue Box
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Username"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setusername=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setusername=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the username for the account:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$samname = ($setusername | Out-String)
$samname = ($setusername) + ("")
function validateUser
    param(
    [string]$username
    #if the username is passed without domain\
    if(($username.StartsWith("domain\")) -eq $false)
        $user = Get-ADUser -Filter { SamAccountName -eq $username }
        if (!$user)
            return $false
        else
            return $true
    elseif(($username.StartsWith("domain\")) -eq $true)
        $username = ($username.Split("\")[1])
        $user = Get-ADUser -Filter { SamAccountName -eq $username }
        if (!$user)
            return $false
        else
            return $true
$usercheck = validateUser -username $samname
if($userCheck -eq $true) {
[System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
[Windows.Forms.MessageBox]::Show("Username already exists in AD please check and retry",`
"Username Check", [Windows.Forms.MessageBoxButtons]::OK, [Windows.Forms.MessageBoxIcon]::Stop)
[environment]::Exit(0)
else {} #Continue
Write-Host ""
Write-Host "USERNAME has been set to" $samname -ForegroundColor Yellow
#Set User Accounts First Name
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "First Name"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setfirstname=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setfirstname=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the users first name:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$givname = ($setfirstname | Out-String)
$givname = ("$setfirstname") + ("")
Write-Host ""
Write-Host "FIRST NAME has been set to" $givname -ForegroundColor Yellow
#Set User Accounts Last Name
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Last Name"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setlastname=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setlastname=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the users last name:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$surname = ($setlastname | Out-String)
$surname = ("$setlastname") + ("")
Write-Host ""
Write-Host "LAST NAME has been set to" $surname -ForegroundColor Yellow
#Set the Department Number for the Active Directory Account
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Cost Center"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setcostcode=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setcostcode=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,20)
$objLabel.Text = "Please enter the cost center for the account:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,40)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set variable and continue
$costcode = ($setcostcode | Out-String)
$costcode = ("$setcostcode") + ("")
Write-Host ""
Write-Host "COSTCODE has been set to" $costcode -ForegroundColor Yellow
#This creates a checkbox called Employee
$objTypeCheckbox = New-Object System.Windows.Forms.Checkbox
$objTypeCheckbox.Location = New-Object System.Drawing.Size(10,220)
$objTypeCheckbox.Size = New-Object System.Drawing.Size(500,20)
$objTypeCheckbox.Text = "Employee"
$objTypeCheckbox.TabIndex = 4
$objForm.Controls.Add($objTypeCheckbox)
#This creates a checkbox called Citrix User
$objCitrixUserCheckbox = New-Object System.Windows.Forms.Checkbox
$objCitrixUserCheckbox.Location = New-Object System.Drawing.Size(10,240)
$objCitrixUserCheckbox.Size = New-Object System.Drawing.Size(500,20)
$objCitrixUserCheckbox.Text = "Citrix User"
$objCitrixUserCheckbox.TabIndex = 5
$objForm.Controls.Add($objCitrixUserCheckbox)
#Set Permanent or Contractor (Expiration Date)
[void][reflection.assembly]::Load("System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089")
[void][reflection.assembly]::Load("System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
[System.Windows.Forms.Application]::EnableVisualStyles()
$form1 = New-Object 'System.Windows.Forms.Form'
$datetimepicker1 = New-Object 'System.Windows.Forms.DateTimePicker'
$radiobuttonPermanent = New-Object 'System.Windows.Forms.RadioButton'
$radiobuttonContractor = New-Object 'System.Windows.Forms.RadioButton'
$buttonOK = New-Object 'System.Windows.Forms.Button'
$InitialFormWindowState = New-Object 'System.Windows.Forms.FormWindowState'
$radiobuttonContractor_CheckedChanged={
    if($radiobuttonContractor.Checked){
        $datetimepicker1.Visible=$true
   }else{
        $datetimepicker1.Visible=$false
$Form_StateCorrection_Load=
   #Correct the initial state of the form to prevent the .Net maximized form issue
   $form1.WindowState = $InitialFormWindowState
$Form_Cleanup_FormClosed=
   #Remove all event handlers from the controls
   try
       $radiobuttonContractor.remove_CheckedChanged($radiobuttonContractor_CheckedChanged)
       $form1.remove_Load($FormEvent_Load)
       $form1.remove_Load($Form_StateCorrection_Load)
       $form1.remove_FormClosed($Form_Cleanup_FormClosed)
   catch [Exception]
$form1.Controls.Add($datetimepicker1)
$form1.Controls.Add($radiobuttonPermanent)
$form1.Controls.Add($radiobuttonContractor)
$form1.Controls.Add($buttonOK)
$form1.AcceptButton = $buttonOK
$form1.ClientSize = '508, 262'
$form1.FormBorderStyle = 'FixedDialog'
$form1.MaximizeBox = $False
$form1.MinimizeBox = $False
$form1.Name = "form1"
$form1.StartPosition = 'CenterScreen'
$form1.Text = "Form"
$form1.add_Load($FormEvent_Load)
# datetimepicker1
$datetimepicker1.Location = '160, 91'
$datetimepicker1.Name = "datetimepicker1"
$datetimepicker1.Size = '200, 20'
$datetimepicker1.TabIndex = 3
$datetimepicker1.Visible = $False
# radiobuttonPermanent
$radiobuttonPermanent.Location = '33, 57'
$radiobuttonPermanent.Name = "radiobuttonPermanent"
$radiobuttonPermanent.Size = '104, 24'
$radiobuttonPermanent.TabIndex = 2
$radiobuttonPermanent.TabStop = $True
$radiobuttonPermanent.Text = "Permanent"
$radiobuttonPermanent.UseVisualStyleBackColor = $True
# radiobuttonContractor
$radiobuttonContractor.Location = '33, 87'
$radiobuttonContractor.Name = "radiobuttonContractor"
$radiobuttonContractor.Size = '104, 24'
$radiobuttonContractor.TabIndex = 1
$radiobuttonContractor.TabStop = $True
$radiobuttonContractor.Text = "Contractor"
$radiobuttonContractor.UseVisualStyleBackColor = $True
$radiobuttonContractor.add_CheckedChanged($radiobuttonContractor_CheckedChanged)
# buttonOK
$buttonOK.Anchor = 'Bottom, Right'
$buttonOK.DialogResult = 'OK'
$buttonOK.Location = '421, 227'
$buttonOK.Name = "buttonOK"
$buttonOK.Size = '75, 23'
$buttonOK.TabIndex = 0
$buttonOK.Text = "OK"
$buttonOK.UseVisualStyleBackColor = $True
#endregion Generated Form Code
#Save the initial state of the form
$InitialFormWindowState = $form1.WindowState
#Init the OnLoad event to correct the initial state of the form
$form1.add_Load($Form_StateCorrection_Load)
#Clean up the control events
$form1.add_FormClosed($Form_Cleanup_FormClosed)
#Show the Form
$form1.ShowDialog()
#Set the password for the new user account
#Change P@$$w0rd to whatever you want the account password to be
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$objForm = New-Object System.Windows.Forms.Form
$objForm.Font = New-Object System.Drawing.Font("Arial",10)
$objForm.Text = "Password"
$objForm.Size = New-Object System.Drawing.Size(300,200)
$objForm.StartPosition = "CenterScreen"
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
    {$global:setpassword=$objTextBox.Text;$objForm.Close()}})
$objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
    {$objForm.Close()}})
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,120)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:setpassword=$objTextBox.Text;$objForm.Close()})
$objForm.Controls.Add($OKButton)
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,120)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click(
{$Looping=$False
$objForm.Close()
[environment]::Exit(0)
$objForm.Controls.Add($CancelButton)
$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20)
$objLabel.Size = New-Object System.Drawing.Size(280,40)
$objLabel.Text = "Please enter the password you wish to set. Press Enter for P@SSw0rd:"
$objForm.Controls.Add($objLabel)
$objTextBox = New-Object System.Windows.Forms.TextBox
$objTextBox.Location = New-Object System.Drawing.Size(10,60)
$objTextBox.Size = New-Object System.Drawing.Size(260,20)
$objForm.Controls.Add($objTextBox)
$objForm.Topmost = $True
$objForm.Add_Shown({$objForm.Activate(); $objTextBox.focus()})
[void] $objForm.ShowDialog()
#If OK then set password and continue
$userpassword = ($setpassword | Out-String)
$userpassword = ("$setpassword") + ("")
if ($userpassword -eq "") {$userpassword = 'P@SSw0rd'}
$password = (ConvertTo-SecureString $userpassword -AsPlainText -Force)
#Set Variables for New-ADUser cmdlet
$dplname = "$surname, $givname"
$upname = "$givname.$surname" + "@" + "$domdns"
$email = "$givname" + "." + "$surname" + "@eta.state.tx.us"
$office = "WBT"
$description = "$costcode"
$description2 = "611IS - Permanent"
$description3 = "611PM - Permanent"
$description4 = "501 - Permanent"
##$loginscript = "yourloginscriptname"
$servername = "teafs2"
$homedir = "\\$($servername)\User\$($samname)"
$homedirpath = "\\$($servername)\User\$($samname)"
$Company= "ETA"
$department = "yourdepartment"
$department4 = "School Finance"
$departmentnumber = "" + "-" + "$costcode"
Write-Host ""
Write-Host "HOME SERVER is" $servername -ForegroundColor Yellow
Write-Host ""
Write-Host "HOME DIRECTORY has been set to" $homedir -ForegroundColor Yellow
Write-Host ""
Write-Host "DEPARTMENT has been set to" $department -ForegroundColor Yellow
Write-Host ""
Write-Host "DESCRIPTION has been set to" $departmentnumber -ForegroundColor Yellow
Write-Host ""
#Create Active Directory Account
New-ADUser -Name $dplname -SamAccountName $samname -DisplayName $dplname `
-givenname $givname -surname $surname -userprincipalname $upname -emailaddress $email `
-Path $targetou -Enabled $true -ChangePasswordAtLogon $true -Department $department `
-OtherAttributes @{'departmentNumber'="$departmentnumber"} -Company $Company -HomeDrive "H" -HomeDirectory $homedir `
-Description $description -Office $office -ScriptPath $loginscript -AccountPassword $password `
#Add User to Active Directory Groups Based on Description Field
If ((Get-ADUser $samname -Properties description).description -eq $description2) {
Add-ADGroupMember -Identity "CN=InformationSystemsPrintGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=InformationSystemsOUDataGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=InformationSystemsNetworkAccess,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Mail users,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
If ((Get-ADUser $samname -Properties description).description -eq $description3) {
Add-ADGroupMember -Identity "CN=ProjectMgmtNetworkAccess,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=ProjectMgmtOUDataGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=ProjectMgmtPrintGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Cognos ETASE Dev-Test-Prod,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=PMO ALL,OU=Distribution Groups,OU=Mailbox accounts,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=PMO Permanent,OU=Distribution Groups,OU=Mailbox accounts,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Mail users,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
If ((Get-ADUser $samname -Properties description).description -eq $description4) {
Add-ADGroupMember -Identity "CN=SchoolFinancePrintGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=SchoolFinanceOUDataGroup,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=SchoolFinanceNetworkAccess,CN=Groups,OU=ETA,DC=tea,DC=state,DC=tx" -Member $samname
Add-ADGroupMember -Identity "CN=Mail users,OU=Groups,DC=tea,DC=state,DC=tx" -Member $samname
#Does the user require a mailbox?
$mailbox = New-Object -ComObject wscript.shell
$intAnswer = $mailbox.popup("Does this user require a mailbox?", `
0,"Create Mailbox",32+4)
If ($intAnswer -eq 6) {
    Add-ADGroupMember -Identity "YourADGroupName5" -Member $samname
    $mailbox.popup("User added to EMail Provisioning Group", `
    0,"Created",64+0)
} else {
    $mailbox.popup("User has not been added to the EMail Provisioning Group", `
    0,"Not Created",64+0)
#Does the user require a LYNC Account?
$lyncaccount = New-Object -ComObject wscript.shell
$intAnswer = $lyncaccount.popup("Does this user require a LYNC Account?", `
0,"Create LYNC Account",32+4)
If ($intAnswer -eq 6) {
    Add-ADGroupMember -Identity "YourADGroupName6" -Member $samname
    $lyncaccount.popup("User added to LYNC Provisioning Group", `
    0,"Created",64+0)
} else {
    $lyncaccount.popup("User has not been added to the LYNC Provisioning Group", `
    0,"Not Created",64+0)
#Create Home Directory and Set Permissions on Home Directory
New-Item -path $homedirpath -type directory
$acl = Get-ACL -path $homedirpath
$permission = "yourdomainname\$($samname)","Modify","ContainerInherit,ObjectInherit","None","Allow"
$accessrule = new-object System.Security.AccessControl.FileSystemAccessRule $permission
$acl.SetAccessRule($accessrule)
$acl | Set-ACL -path $homedirpath
##Set Share Permissions on Home Directory
$Computer = $servername
$Class = "Win32_Share"
$Method = "Create"
$name = $sharename
$path = $sharedirpath
$description = ""
$sd = ([WMIClass] "\\$Computer\root\cimv2:Win32_SecurityDescriptor").CreateInstance()
$ACE = ([WMIClass] "\\$Computer\root\cimv2:Win32_ACE").CreateInstance()
$Trustee = ([WMIClass] "\\$Computer\root\cimv2:Win32_Trustee").CreateInstance()
$Trustee.Name = "EVERYONE"
$Trustee.Domain = $Null
$Trustee.SID = @(1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0)
$ace.AccessMask = 2032127
$ace.AceFlags = 3
$ace.AceType = 0
$ACE.Trustee = $Trustee
$sd.DACL += $ACE.psObject.baseobject
$mc = [WmiClass]"\\$Computer\ROOT\CIMV2:$Class"
$InParams = $mc.psbase.GetMethodParameters($Method)
$InParams.Access = $sd
$InParams.Description = $description
$InParams.MaximumAllowed = $Null
$InParams.Name = $name
$InParams.Password = $Null
$InParams.Path = $path
$InParams.Type = [uint32]0
$R = $mc.PSBase.InvokeMethod($Method, $InParams, $Null)
switch ($($R.ReturnValue))
0 {Write-Host "Share:$name Path:$path Result:Success"; break}
2 {Write-Host "Share:$name Path:$path Result:Access Denied" -foregroundcolor red -backgroundcolor yellow;break}
8 {Write-Host "Share:$name Path:$path Result:Unknown Failure" -foregroundcolor red -backgroundcolor yellow;break}
9 {Write-Host "Share:$name Path:$path Result:Invalid Name" -foregroundcolor red -backgroundcolor yellow;break}
10 {Write-Host "Share:$name Path:$path Result:Invalid Level" -foregroundcolor red -backgroundcolor yellow;break}
21 {Write-Host "Share:$name Path:$path Result:Invalid Parameter" -foregroundcolor red -backgroundcolor yellow;break}
22 {Write-Host "Share:$name Path:$path Result:Duplicate Share" -foregroundcolor red -backgroundcolor yellow;break}
23 {Write-Host "Share:$name Path:$path Result:Reedirected Path" -foregroundcolor red -backgroundcolor yellow;break}
24 {Write-Host "Share:$name Path:$path Result:Unknown Device or Directory" -foregroundcolor red -backgroundcolor yellow;break}
25 {Write-Host "Share:$name Path:$path Result:Network Name Not Found" -foregroundcolor red -backgroundcolor yellow;break}
default {Write-Host "Share:$name Path:$path Result:*** Unknown Error ***" -foregroundcolor red -backgroundcolor yellow;break}

Would you be able to show me how it's done?
Here's an example:
$date = Read-Host 'Enter a date (e.g. 4/23/14)'
Write-Host "Original string: $date"
$dateTime = [datetime]$date
Write-Host "DateTime object: $dateTime"
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Will my website, which I published through my mobile me account, no longer work as soon as I switch to iCloud, or will it continue to be supported until June. I know I will have to publish it at Go Daddy or something similar, but am not ready to do that y

Will my website, which I published through my mobile me account, no longer work as soon as I switch to iCloud, or will it continue to be supported until June. I know I will have to publish it at Go Daddy or something similar, but am not ready to do that yet. I just got an iPad 2 and want to get swtiched over to iCloud, but will wait if it will make my website inaccessible.

Your iDisk, together with your website and Gallery if you have one, will be unaffected and will continue exactly as before after you migrate to iCloud.
The migration process will probably log you out of MobileMe so you may need to go to System Preferences>MobileMe and log back in to be able to access your iDisk in the Finder. Web access will be unaffected.
You will need Lion 10.7.2 on your iMac.

Active Sync certificates no longer work with iOs 4.3

Existing Active Sync certificates no longer work with iOs 4.3. Can I fix this?

My results differ from yours.
With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

Cannot login with Active Directory Account

Hello,
I am testing SnowLeopard (10.6.1) for deployment in my labs for the Spring 2010 semester. We use local home directories. This is a brand new fresh install of SL, on a freshly formatted Hard Drive.
When bound to Active Directory I can get any AD account that I've tested (5 different accounts) to authenticate except one, which happens to be my own personal AD account.
The secure.log shows these entries when I attempt to login:
Oct 9 14:18:29 mac-0017f20fc40 SecurityAgent[209]: User info context values set for ctarbox
Oct 9 14:18:29 mac-0017f20fc40 authorizationhost[208]: Failed to authenticate user <ctarbox> (tDirStatus: -14090).
Considering that I could log in with other accounts, and after resetting my AD password then still not being able to authenticate, I came to the conclusion that I had a corrupt OU in Active Directory.
I contacted one of our AD admins and had him delete both of my AD accounts: ctarbox and ctarbox1 then recreate both accounts. I still cannot login to AD with my ctarbox account.
I can still login to my current lab machines anywhere on campus running 10.5.8 with ctarbox.
I am baffled by this. I have been authenticating to Active Directory since 10.1 and have never seen anything like this.
Any idea, anyone?
Cheryl Tarbox
Macintosh Support Specialist
Binghamton University

I have found the solution to my problem. I have accounts in two different domains in our AD tree. I'll called these domains Domain A and Domain B.
Domain A is the primary domain for authentication to our public computing labs.
Domain B is a secondary domain for authentication to shared resources for faculty/staff.
Both accounts have the same user ID, but different passwords. In my Directory Utility>Advanced>Administrative window I have the option "Allow authentication from any domain in the forest' checked.
With this option checked Directory Utility in 10.6.1 will allow me to authenticate Domain B, but not Domain A.
With this option checked in Directory Utility in 10.5.8 just the opposite is taking place, I can authenticate to Domain A, but not Domain B.
It seems that somewhere in the upgrade to 10.6.1 the search policy for Active Directory has changed. My workaround is to uncheck this option and specifically choose Domain A in the search policy.

Setting up Wiki Calendars in iCal with Active Directory Accounts

I'm Having a little trouble wrapping my head around our Wiki Calendar Solution,
Id like to find a way to get the 10.6 Wiki Server Calendar's in iCal Client - using our active directory authentication.
I have a test 10.6 Server bound to our Active Directory with Wiki's up and running and am able to log in with AD account's and view and manage the Wiki Calendar - I can see how to subscribe to the calendar's - But I need full integration with iCal and maybe even Outlook - subscribing only provides read access.
anyone have any idea how his can be accomplished in and active directory setting - my searches have lead me to OD solutions and thats not going to work.

I don't know how much I'll be able to help, but I do have AD accounts using wiki services. Can you verify a few things:
1. The AD group is listed in the "Wiki Creators" box in Server Admin, yes?
2. If you open Terminal and run "sudo serveradmin settings teams:enableClearTextAuth", does it return "teams:enableClearTextAuth = yes"?
3. If you open System Preferences -> Accounts and then edit the directory servers, does the AD domain show as working normally?
Also, have you worked to isolate the problem? Have you tried creating an OD user to test against the wiki? Are the logs showing anything?

'Public' Active Directory account no longer works w/Tiger?

Similar Messages

Maybe you are looking for