Public Beta? Documentation? API Reference? Sample Code?

Dear Adobe:
Is this beta just for testing existing code to see if the new player version breaks our existing code?
Or is this beta intended as a public beta to allow developers to use the new capabilities in FP11/AIR3?
Based on the release announcement stating "Introduces features" it seemed like it was intended to allow all interested developers to access the new APIs. If this is true, can an Adobe employee explain what a "beta" of FP11/AIR3 means without documentation or code samples? Or, if docs and/or samples are public can you reply on this post with the links?
I do see the link on the Features page for "Stage3D APIs (`Molehill`) for Flash Player". I would very much appreciate if you could add a similar link for a page with details on "H.264/AVC SW Encoding for Camera" :-)
Best regards from the lead on a loyal developer team chomping at the bit to build great solutions using the new FP11/AIR3 capabilities.
Best regards,
g
P.S. Following are related, prior and still unanswered posts:
http://forums.adobe.com/thread/877323
http://forums.adobe.com/thread/877452

Here's what I've heard from one of our community managers regarding stage3d:
"Thibault Imbert posted a discussion of what Stage3D is all about back then at http://www.bytearray.org/?p=2555. NJ also posted a more beginner level discussion of what it is all about at http://www.rictus.com/muchado/2011/02/28/demystifying-molehill-part-1/. Assuming they actually do intend to use these low level API’s (which I doubt most people will want to or have the ability even to do so), a site called iFlash3D covered it in great detail in a two part series discussing the ins-and-outs of AGAL (http://iflash3d.com/shaders/my-name-is-agal-i-come-from-adobe-1/ and http://iflash3d.com/shaders/my-name-is-agal-i-come-from-adobe-2/) as well as a reference card for AGAL http://iflash3d.com/site/agal-reference-card-available/. Or another that discusses how to manage cameras in a 3D space http://iflash3d.com/flash3d-coding/flash-3d-molehill-cameras/. Beyond those sites, most people aren’t discussing the details of the Stage3D api’s for a general audience that I have found."
I asked about the other new features (audio compression, surround sound, video encoding, etc.) but they hadn't seen anything created yet. However, they are interested in getting content developed for these areas and will work on getting that done. Look for third party resources and ADC updates in the near future.
Thanks,
Chris

Similar Messages

Need help with API and sample code for checking a user's rights on a folder

Hi All,
I am working on an UCM integration where user supplies a folderpath (ucm folders), and a file is later uploaded to this location.
Since a user can provide a folderpath where he has only Read Access or no access at all, we are trying to work out a way to pre-check his permissions on the folder.
Since we have Entity Security enabled, we have 5 security fields to rely on Account, Security Group, User Access List, Group Access List, Role Access List.
Writing custom code for this security check is second on our agenda.
Firstly, we wish to know the API and sample code that typically performs this Security Check in UCM.
We could find intradoc.shared.SecurityUtils which has methods to check security on SGroup and Account, but we couldn't find anything for:
1) Overall security check
2) ACL security check on top of sgroup and account security check

Any ideas anyone?!
I am looking forward to some pointers here. :(

API or Sample code to monitor the temperature of Intel processors

Is there any free(no license or trail) API or sample code for temperature monitoring which can able to monitor Intel single Core, dual Core and quad Core processors temperature ?
http://tnvbalaji.com
http://in.linkedin.com/in/tnvbalaji

Hi,
Would you mind letting me know the result of the suggestions? If you need further assistance, feel free to let me know. I will be more than happy to be of assistance.
Best regards,
Jesse
Jesse Jiang [MSFT]
MSDN Community Support | Feedback to us

I want to an API or any sample code to make business calls to J.D.Edwards

hi,
i want to make use of J.D.Edwards from my java GUI application, by using my Application Interface i want to make use of Java Calls to the the J.D.Edwards. is any one is having API or Sample code fro this?
plz help me out Regarding this.

hi,
i hav searched through google also
i did not get anything regarding this, what all got apart from this is,
in market we are having 3rd party onnectors for this.
but i dotn use any of them.
can any body help me regarding this plz.

Essbase API Sample code

Hi,Can anyone help me to get Essbase API's sample code for Java.Thanks in advance.Mahesh

When you install Essbase Deployment Services (formerly Essbase Enterprise Services), which is the container for the Java API, a sample directory get installed that has about 30 sample Java classes covering a wide variety of JAPI functionality.Tim TowApplied OLAP, Inc

RSA on j2me sample code needed

Hello,
Please does anyone have a working rsa public and private key cryptograghy sample code for a mobile device Or j2me.
i am working on an evoting aplication using j2me as my client ,but i need a rsa key .please as anybody done this before?
I need urgent help.
Thanks

Cross posting
http://forum.java.sun.com/thread.jspa?threadID=5209791&tstart=0
db

Web Service API sample code

Howdy All,
I am trying to work through the iTunes U Admin's guide directions on how to upload content using the Web Service API. I have completed everything through step 2, (I believe it is page 48 in the current guide), Request an Upload URL from iTunes U. After I try to POST a file to the URL returned in step 2 the only response I receive back from the server is a 500 error. I am writing my application in C# so using a UNIX curl script to perform the file upload is not possible, and that seems to be the only thing close to sample code that I can find.
Has anybody else written some .NET code that performs the file upload in step 3 that they would be willing to share? Even Java code that I could port over to C# would be a good start. I can also post some of my own code if there is anybody that feels like taking a look at it.
Thanks,
David
Other OS

Couple of pointers for you ...
First is that the documentation (last time I looked) has a bug that will prevent you from using the web services API. Here is a link to the changes you need to make:
http://discussions.apple.com/thread.jspa?threadID=899752&tstart=15
Next, when I was working through this stuff, I found learned a ton about HTTP I didn't previously know (like how to construct a valid multipart MIME doc). If it would be helpful, your POSTed doc should look pretty close to this:
Content-Type: multipart/form-data; boundary=0xKhTmLbOuNdArY
--0xKhTmLbOuNdArY"
Content-Disposition: form-data; name="file"; filename="myXMLFile.xml"
Content-Type: text/xml; charset="utf-8"
<?xml version="1.0" encoding="UTF-8"?>
<ITunesUDocument>
<ShowTree>
<KeyGroup>maximal</KeyGroup>
</ShowTree>
</ITunesUDocument>
--0xKhTmLbOuNdArY--
I would be happy to share my own code, but it might not be what you're after (I used Objective-C and Apple's NSMutableHTTPRequest Cocoa class to do my HTTP POST). I am not a C# guy, but I would bet dollars-to-donuts that C# has some kind of class that serves as a wrapper for an HTTP POST request ... you give it the HTML, it POSTs.
MacBook Pro Mac OS X (10.4.8) I lied. I'm running Leopard

KIMYONG : API ( FND_SUBMIT, FND_REQUEST) Sample Code 소개

Purpose
Extension 개발자들이 간혹 요청하는 Standard API (FND_SUBMIT, FND_REQUEST)의 sample code입니다.
Configuring the Script
FND_SUBMIT test procedure and sample code
Creates a procedure called fnd_submit_test that can be registered and run as a concurrent program.
This procedure will use the FND_SUBMIT API to submit a request set. (Function Security Reports - This request set should be seeded, if it is not available the values in the script may need to be changed.) The procedure will then place itself in a Paused status until the request set completes.
Running the Script
1. Install this procedure in the APPS schema.
2. Register the procedure as a concurrent program
Caution
This script is provided for educational purposes only and not supported by Oracle Support Services. It has been tested internally, however, and works as documented. We do not guarantee that it will work for you, so be sure to test it in your environment before relying on it.
Proofread this script before using it! Due to the differences in the way text editors, e-mail packages and operating systems handle text formatting (spaces, tabs and carriage returns), this script may not be in an executable state when you first receive it. Check over the script to ensure that errors of this type are corrected.
Script
REM +==========================================================================
REM | Concurrent Processing Sample Code
REM |
REM | FILE:
REM | fnd_submit_test.pls
REM |
REM | REVISION:
REM | $Id$
REM |
REM | DESCRIPTION:
REM | FND_SUBMIT test procedure and sample code
REM | Creates a procedure called fnd_submit_test that can be registered
REM | and run as a concurrent program.
REM | This procedure will use the FND_SUBMIT API to submit a request set.
REM | (Function Security Reports - This request set should be seeded, if
REM | it is not available the values in the script may need to be changed.)
REM | The procedure will then place itself in a Paused status until the
REM | request set completes.
REM |
REM | INSTRUCTIONS:
REM |
REM | 1. Install this procedure in the APPS schema.
REM |
REM | 2. Register the procedure as a concurrent program
REM |
REM |
REM +==========================================================================
whenever sqlerror exit failure rollback;
create or replace procedure fnd_submit_test (errbuf out varchar2,
retcode out varchar2) as
success boolean;
req_id number;
req_data varchar2(10);
srs_failed exception;
submitprog_failed exception;
submitset_failed exception;
begin
-- Use FND_FILE to output messages at each stage
fnd_file.put_line(fnd_file.log, 'Starting test...');
-- Read fnd_conc_global.request_data, if available then we have been
-- reawakened after the request set has completed.
-- If so, exit.
req_data := fnd_conc_global.request_data;
if (req_data is not null) then
errbuf := 'Done!';
retcode := 0 ;
return;
end if;
-- Step 1 - call set_request_set
fnd_file.put_line(fnd_file.log, 'Calling set_request_set...');
success := fnd_submit.set_request_set('FND', 'FNDRSSUB43');
if ( not success ) then
raise srs_failed;
end if;
fnd_file.put_line(fnd_file.log, 'Calling submit program first time...');
-- Step 2 - call submit program for each program in the set
success := fnd_submit.submit_program('FND','FNDMNFUN', 'STAGE10', 'System Administrator', chr(0));
if ( not success ) then
raise submitprog_failed;
end if;
fnd_file.put_line(fnd_file.log, 'Calling submit program second time...');
success := fnd_submit.submit_program('FND','FNDMNMNU', 'STAGE10', 'System Administrator', chr(0));
if ( not success ) then
raise submitprog_failed;
end if;
fnd_file.put_line(fnd_file.log, 'Calling submit program third time...');
success := fnd_submit.submit_program('FND','FNDMNNAV', 'STAGE10', 'System Administrator', chr(0));
if ( not success ) then
raise submitprog_failed;
end if;
-- Step 3 - call submit_set
fnd_file.put_line(fnd_file.log, 'Calling submit_set...');
req_id := fnd_submit.submit_set(null,true);
if (req_id = 0 ) then
raise submitset_failed;
end if;
fnd_file.put_line(fnd_file.log, 'Finished.');
-- Set conc_status to PAUSED, set request_data to 1 and exit
fnd_conc_global.set_req_globals(conc_status => 'PAUSED', request_data => '1') ;
errbuf := 'Request set submitted. id = ' || req_id;
retcode := 0;
exception
when srs_failed then
errbuf := 'Call to set_request_set failed: ' || fnd_message.get;
retcode := 2;
fnd_file.put_line(fnd_file.log, errbuf);
when submitprog_failed then
errbuf := 'Call to submit_program failed: ' || fnd_message.get;
retcode := 2;
fnd_file.put_line(fnd_file.log, errbuf);
when submitset_failed then
errbuf := 'Call to submit_set failed: ' || fnd_message.get;
retcode := 2;
fnd_file.put_line(fnd_file.log, errbuf);
when others then
errbuf := 'Request set submission failed - unknown error: ' || sqlerrm;
retcode := 2;
fnd_file.put_line(fnd_file.log, errbuf);
end;
rem ===================================================================
commit;
exit;
Reference
자세한 사항은 Note 221542.1 를 참고하세요.

Not sure about that particular option, but in general you pass in pairs - an example from code I didn't write but maintain (so if this is the worst possible way, I apologize)
proj_req_id6 := FND_REQUEST.SUBMIT_REQUEST('SQLGL', 'XXXX_GLGENLED_PDF',
                          'XXXX General Ledger',
                          '',dummy_default,
                          'P_SET_OF_BOOKS_ID='||v_rep_cmp.set_of_books_id,'P_CHART_OF_ACCOUNTS_ID=101',
                          'P_KIND=L','P_CURRENCY_CODE='||v_rep_cmp.currency_code,
                          'P_ACTUAL_FLAG=A','P_BUD_ENC_TYPE_ID=100',
                          'P_START_PERIOD='||'&1','P_END_PERIOD='||'&1',
                          'P_MIN_FLEX='||v_min_flex||'.'||v_emp_cost_center.COST_CENTER||'.00000.000.000.000.00',
                          'P_MAX_FLEX='||v_max_flex||'.'||v_emp_cost_center.COST_CENTER||'.99999.999.999.ZZZ.99',
                          'P_PAGE_SIZE=180',chr(0),'',
                          '','','','','','','','','','');You see where I have option pairs - for example
'P_ACTUAL_FLAG=A'Tells my program that the value for parameter P_ACTUAL_FLAG is A
This example is from a SQL*Plus script, hence the &1 for the value substitutions.
Hope that helps

Need Sample Code for Vendor creation using JAVA API

Hi,
I have a scenario like Vendor creation using Java API.
1.I have Vendors (Main) Table.
2.I have look up tables like Account Group.
3.Also Qualifier table(Phone numbers) too.
Could you please give me the sample code which helps me to create Vendor records using Java API?
I need Code samples which should cover all of the above scenario.
Marks will be given for the relevent answers.
Best Regards
PK Devaraj

Hi Devraj,
I hope the below code might solve all your problem:-
//Adding Qualified field
//Creating empty record in Qualifed table
//Adding No Qualifiers
Record qualified_record = RecordFactory.createEmptyRecord(new TableId(<TableId>));
try {
qualified_record.setFieldValue(new FieldId(<fieldId of NoQualifier), new StringValue(<StringValue>));//Adding No Qualifier
catch (IllegalArgumentException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
catch (MdmValueTypeException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
//Creating Record in Qualified table
CreateRecordCommand create_command = new CreateRecordCommand(connections);
create_command.setSession(sessionId);
create_command.setRecord(qualified_record);
try
create_command.execute();
catch(Exception e)
System.out.println(e.toString());
RecordId record_id = create_command.getRecord().getId();
//Adding the new record to Qualifed Lookup value and setting the Yes Qualifiers
QualifiedLookupValue lookup_value = new QualifiedLookupValue();
int link = lookup_value.createQualifiedLink(new QualifiedLinkValue(record_id));
//Adding Yes Qualifiers
lookup_value.setQualifierFieldValue(0 , new FieldId(<FieldID of Yes Qualifier>) , new StringValue(<StringValue>));
//Now adding LookUP values
//Fetch the RecordID of the value selected by user using the following function
public RecordId getRecordID(ConnectionPool connections , String sessionID , String value , String Fieldid , String tableid)
ResultDefinition rsd = new ResultDefinition(new TableId(tableid));
rsd.addSelectField(new FieldId(Fieldid));
StringValue [] val = new StringValue[1];
val[0] = new StringValue(value);
RetrieveRecordsByValueCommand val_command = new RetrieveRecordsByValueCommand(connections);
val_command.setSession(sessionID);
val_command.setResultDefinition(rsd);
val_command.setFieldId(new FieldId(Fieldid));
val_command.setFieldValues(val);
try
 val_command.execute();
catch(Exception e)
RecordResultSet result_set = val_command.getRecords();
RecordId id = null;
if(result_set.getCount()>0)
 for(int i = 0 ; i < result_set.getCount() ; i++)
 id = result_set.getRecord(i).getId();
return id;
//Finally creating the record in Main table
com.sap.mdm.data.Record empty_record = RecordFactory.createEmptyRecord(new TableId("T1"));
try {
 empty_record.setFieldValue(new FieldId(<FieldId of text field in Main table>),new StringValue(<StringValue>));
 empty_record.setFieldValue(new FieldId(<FieldId of lookup field in Main table>), new LookupValue(<RecordID of the value retrieved using the above getRecordID function>));
empty_record.setFieldValue(new FieldId(<FieldId of Qualified field in Main table>), new QualifiedLookupValue(<lookup_value>));//QualifiedLookUp value Retrieved above
} catch (IllegalArgumentException e1) {
// TODO Auto-generated catch block
 e1.printStackTrace();
} catch (MdmValueTypeException e1) {
 // TODO Auto-generated catch block
 e1.printStackTrace();
//Actually creating the record in Main table
CreateRecordCommand create_main_command = new CreateRecordCommand(connections);
create_main_command.setSession(sessionId);
create_main_command.setRecord(empty_record);
try
 create_main_command.execute();
catch(Exception e)
 System.out.println(e.toString());
Thanks
Namrata

DRM API Sample code & new to API work recommendations

Hello Gurus,
I am getting ready to venture into the world of DRM API. I'm a SQL / integration / app type person with no experience related to working wth APIs. Can someone please post some sample code and perhaps recommend some reference books, training, approach I should consider? I welcome the opportunity to learn. I just need a nudge in the right direction. Your recommendations are greatly appreciated!
Cheers!

http://docs.oracle.com/cd/E17236_01/epm.1112/drm_api_ref.html
Thanks,
Murali

I just need a little help to connect with eCommerce API. Could anyone please give a JAVA sample code

Hi All,
I am looking for a sample code to just to connect with Business Catalyst eCommerce API. My aim is to simply retirieve the list of the products and update them.
It would be really helpful, if anyone please provide me a sample code in JAVA, just to connect with the API.
Thanks
Ani

public static void main(String[] args) throws RemoteException, MalformedURLException {
                    String endpoint = "https://CC.sys.com/CatalystWebS1ervice/CatalystEcommerceWebservice.asmx?WSDL"; // endpoint url can be found under Site Settings -> API -> click on eCommerce and copy the URL on the browser here.
                    CatalystEcommerceWebserviceSoapProxy sq = new CatalystEcommerceWebserviceSoapProxy(endpoint);
                    Products[] prod = new Products[2];
                    prod = sq.product_ListRetrieve(Username , Password, SiteID, CatalogueID);
                    System.out.println(prod[1].getDescription());

Wizard framework API SAMPLE CODE !!!!

Does somebody have some sample code
on how to use the wizard framework api
Thanks

Yeah, I have it.
Wizard Framework
Regards
Puru
Award points.

DOCUMENTATION BUG: Broken link in APEX 4.0 API Reference

In the See also section of the <tt>apex_util.remove_preference</tt> method, the *"Managing Session State and User Preferences"* link is dead:
olink:AEADM110|Managing%20Session%20State%20and%20User%20Preferences

The broken lin in APEX 4.0 API Reference has been corrected. The latest updated version of this document is now available on the Oracle Technical Network (OTN).
Thanks for reporting the bug,
Drue Swadener
Principal Technical Writer

How-To/Sample code to tie up class variable to MXML component created in Design view

This is a very noob question but I've been searching through the documentation for the last 2 hours and can't seem to find anything helpful. I have a SWFLoader created in the design view. I have all my app code in an <fx:Script> with all my functions and variable in a CDATA tag. All I want to do is hookup the SWFLoader created in the design view with a private var in my ActionScript.
I also have two separate states for my app, and I want the same SWFLoader to be visible in both states. Can someone point me to some useful sample code or documentation??
Any help is much appreciated.

Sun has recommendations for naming conventions. Class names should start with a capital letter. You should avoid using class names that are the same as classes provided in the SDK. Following these conventions will make it easier for people to help you. For example, you should not use file, nor should you use File. It's better to use MyFile, replacing My with something that makes sense to your application (SeniorFile?).
Also, check the Formatting Help link when posting for a desciption on how to use the code tags for posting code.
1. You need to establish references between your classes. One way is to have a constructor that has a JMenuBar argument.
2. You can not add a file to a JMenuBar because a JMenuBar adds a JMenu. I don't think you want file to extend JMenu. It may be better for file to have a JMenu.
I haven't tried to compile this code so no guarantees - just trying to show you an approach.
public class Senior extends JFrame {
 public Senior() {
 JMenuBar bar = new JMenuBar();
 MyFile file = new MyFile(bar);
//whatever else you need
public class MyFile {
 public MyFile(JMenuBar mbar) {
 JMenu menu = new JMenu();
 mbar.add(menu);

API Reference of SAP Visual Business Geo Maps - SAP UI5

Hi,
I came across a blog post written regarding making SAP Visual Business available on SAPUI5 (since version 1.18) and also came across few demos at this link.
But I am not able to find any API documentation regarding this.
We are working on a small POC using SAP Fiori/SAPUI5, in which we want to make use of maps.
Could anyone please let us know as to where we can find more info regarding the API reference, documentation or some examples with sample code.
Thanks,
Vinay C

Hi Ella,
Indeed we have! We posted a guide on Client side development: UI5 Development with Visual Business
This will explain the basics and is more usable then the plain API doc in the demo kit.
Cheers Uwe

Public Beta? Documentation? API Reference? Sample Code?

Similar Messages

Maybe you are looking for