Public Folder Replication Status Error c105010f
Hi,
I am trying to migrate from Exchange 2003 to 2010. I am now moving the replicas. I am not able to open Public Folder Replication where it gives me the error :
An unexpected, unknown error has occurred. MAPI or an unspecified service
provider.
ID no: 8004010f-0000-00000000
ID no: c105010f
I have alreday search and a hotfix is available from the link http://support.microsoft.com/kb/885468/en-us but i am not able to apply the hotfix as the system i am running is newer than
the hotfix requirement. Any solution please help :(
Hi,
I have searched for the error message, and it points to corrupt public folder database for most cases.
So I would recommend you first try the Eseutil/Isinteg tool to repair the public folder database, for your reference:
http://exchangeserver.tumblr.com/post/44851518519/how-to-repair-exchange-databases-with-eseutil-isinteg .
If it doesn’t work, please per the link below to restore public folder:
http://technet.microsoft.com/en-us/library/bb123467(v=exchg.65).aspx .
Regards,
Rebecca
Similar Messages
-
Exchange 2010 - public folder replication
Hi there.
Exchange 2010 SP3 (CU 8v2).
We would like to rid of the replication public folder messages.
Is it safe to delete those folders and they Will be automatically recreated?
We would like to get rid of those errors before we plan migration of PF to Exchange 2013 PF's.
with best regards
bostjancHi,
To get rid of these warnings, I suggest to Removing and re-adding the replica for the affected public folders. To remove and add replica for server, please use this script:
RemoveReplicaFromPFRecursive.ps1 –TopPubicFolder <\folder> –Server toRemove <servername>
AddReplicatoPFRecursive.ps1 –TopPulblicFolder <\folder> -ServerToAdd <servername>
Note: Scripts are found at %SystemDrive%\Program Files\Microsoft\Exchange Server\v14\Scripts. To run a script, type the following in the Exchange Management Shell:
[PS] C:\>cd $exscripts
[PS] C:\Program Files\Microsoft\Exchange Server\Scripts>.\ RemoveReplicaFromPFRecursive.ps1
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Outlook 2010 - Move to public folder brings an error "the folder is not available"
Hi
we have exchange 2010 SP3 in our organization
clients use both 2010 SP2 \ 2013 outlooks
when moving an item from the mailbox to a public folder directory the item moves successfully, and the directory is added to the recent directories under the "Move" button.
then, when I try to move another item to a public folder directory from the dropdown recent list I get the error message:
"The folder is not available"
obviously it's available as I can do the same action manually. it happens on Outlook 2010, Outlook 2010 SP2 and Outlook 2013
for all the users
so it's not a profile or a user's issue
I saw many posts with the same error but they mostly talk about pst files and the solution is the kb
2405793 which is already included in SP2 + out users don't use pst. everything is in exchange
hope to get some answers before I open support case at MS
Tamir LevyHi Tamir Levy,
From your description, when you drag an item to public folder, it is successful. When you use the "Move" button to move an item to public folder, it occurred the above error. If I have misunderstood your concern, please let me know.
I recommend you check if the issue also exists via OWA. If the issue doesn't occur when you use OWA, please verify if the issue happens on Outlook online mode or in cached mode.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Public folder replication 2003 2010 not starting
I have ran powershell scripts on exchange 2010 to add replicas recursively (a week ago) I then ran moveallreplicas scipt.
I have checked on 2010 and there are no pf replicas or folders
I checked 2003 and re-added the 2003 server as a replica server and ran pfdavadmin and verified the replication tab and files were all correct.
I then ran exfolders on the 2010 server but that shows no data under replicas or replication or file nothing at all.
I checked the queues on exchange 2003 to make sure the data was not getting backed up but the queues are empty.
Can someone tell me what troubleshooting technique to try next?
***Don't forget to mark helpful or answer***Hi,
Please make sure you connect to a public folder server in Public Folder Management Console.
And please make sure you have a public folder database in Exchange 2010 and make sure you see the public folder hierarchy. Without hierarchy, the MoveAllReplicas.ps1 script won't do anything because there are no folders in the hierarchy to modify.
You can use the Get-PublicFolder -Server <NewServerName> cmdlet to check result.
Here is a blog about public folder migration to Exchange 2010 which may help you for your reference.
http://blogs.technet.com/b/agobbi/archive/2010/08/04/how-to-move-public-folder-from-exchange-2003-to-exchagne-2010.aspx
Best regards,
Belinda Ma
TechNet Community Support -
Public Folder Replication Issues 2k7 to 2k10
Hello
Ater migrating all mailboxes from our old Exchange 2k7 server to 2k10, not i have to get rid of the public folder.
I asked a similar question some months ago, but now i have another new problem.
First off, i have add the 2k10 server to the replicas with the commands:
\AddReplicaToPFRecursive.ps1 -server 2k7server -TopPublicFolder "\" -Servertoadd 2k10server
.\AddReplicatoPFRecursive.ps1 -TopPublicFolder "\Non_IPM_Subtree" -Servertoadd 2k10server
Update-PublicFolderHierarchy -Server 2k10server
Get-PublicFolderStatistics -resultsize unlimited | update-publicfolder -Server 2k10server
After done this some months ago, i have the Hierarchy replicated on the 2k10server and i can see all the folder and subfolders, but with no content. After waiting some days, i got some content replicated,
2GB more or less, and the public folder on the 2k7 server is around 40GB
I have been researching waht could happen, checking permissions, connectors... but cant see were the problem is.
When i laung the public folder update cmdlet on the powershell, i can see on the mail queue, that both server are sending each other emails, from one public folder to the other one. But the thing, is that this emails subject are:
- Backfill Request
- Status
But i dont get any "content" or "folder content" email, so, the content of the public folders are not replicating.
Im lost at the moment i have no more ideas, and i thing i have searched whole google trying everything... im also thinking on exporting the content to a pst and move it... :S:S
Could some one have any tip or workaround form i can continue searching?
Thanks!!!!Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support -
Public folder replication problem
Hi
We have Exchange 2007 and 2010. Now i am about to uninstall 2007.
I have run the script MoveAllReplicas.ps1 so that there is no public folders left on the Exchange 2007. The problem is that one public folder still exists on both 2007 and 2010 and i cannot move it. Why? Is there any other way to remove it from 2007? Goggled
alot on this problem but cannot find a good solution.
Best regards
MatthiasCan you delete it though? I would open Outlook up, export all the contents of the folder to a pst, then delete the folder and recreate it and import from the pst.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Exchange 2013 Public Folder Replication
Can someone share some doc which has information on how Public folder hierarchy is replicated from Primary Public folder mailbox to Secondary public folder mailbox?
Also would like to know, can we have replica of public folder content in two different Public folder mailboxes?Hi,
To update the Public Folder Hierarchy, here is the link:
http://technet.microsoft.com/en-us/library/jj945055(v=exchg.150).aspx
To move a public folder to a different public folder mailbox, please check the following link:
http://technet.microsoft.com/en-us/library/jj906435(v=exchg.150).aspx
Public folder content is stored in the public folder mailbox but isn’t replicated across multiple public folders mailboxes.
Here is a link for more details about Public Folder:
http://technet.microsoft.com/en-us/library/jj150538(v=exchg.150).aspx
Best regards. -
Public Folder Replication Issue
During Exchange 2003 existence two Public folders databases were installed in 2 Exchange 2010 servers and they are replication without any issues. After that Exchange 2003 server were cleaned up.
Now we are planning to replicate this existing 2010 public folders to another Exchange 2010 server in another site but in same Exchange Organization. In this scenario, I added the replica in one of the folders and used script to replicate in all recursive folders.
But yet the 3rd server in other site is not replicating. So to trouble shoot I tried to use Exfolders. But I struck with other error in this below url.
http://clintboessen.blogspot.dk/2011/04/exception-active-directory-user-wasnt.html
https://patrickhoban.wordpress.com/2012/03/
Now I will come to my question. Will this solution will really work because I could not find any Microsoft confirmed article for this. Please confirm.
Though Exchange 2003 is no more, will it hinder the cleanup in future. Or will it be a block stone in future for any of the upgrades or cleanup activity.
Note: We already have Exchange 2013 installed in same Exchange Organization. Instead of delete, I tried renaming the CN=Server but it failed. So I doubt even will I be able to delete it. But it is next problem.
Regards, GhouseAdding the replica will start the replication (Assuming mail flow between 2 sites are working)
No, you won't have any issue removing exchange 2010, given you don't come across with any other issues ;)
What is your concern?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Hello,
We have an Exchange 2010 SP1 environment. The original public folder database was setup to replicate to one database. A new database was setup to migrate data away from the original. This database is on a separate server. Today, the
new database gets the mail for mail enabled public folders. It does not, however, have any items from the original. Both databases are configured in all public folders as replicas. This arrangement has been ongoing for two weeks. The
event log show messages sent from the original. The event log on the new server, shows messages from the old being processed on the new.
Any information regarding how to kick item replication between the two would be appreciated.
Thanks very much,
StaleyHi StaleyPC,
According to your description, I understand that something wrong with public folder replication with error “0x20”.
Firstly, I want to double confirm whether configure properly setting, for your reference:
http://technet.microsoft.com/en-us/library/bb691120(v=exchg.141).aspx
Secondly, please try to test mail flow between two servers. Because public folders are replicated through hidden email messages.
To narrow down the problem, we can then send an email to the public folder to see if it updates properly.
If mail flow is working properly, please look at the Application and System logs. A log entry will often point to the source of the problem without requiring you to manually troubleshoot it.
Please post related event log, it’s more helpful for further troubleshooting.
Additional, I find an article about Public Folder Replication and Troubleshooing, please refer to:
http://blogs.technet.com/b/exchange/archive/2006/01/17/417611.aspx
http://www.msexchange.org/articles-tutorials/exchange-server-2003/management-administration/Public-Folder-Replication-Troubleshooting.html
Best Regards,
Allen Wang -
Replication of Public Folder data from Exchange Sp1 to Exchange SP2
I have one Exch 2010 SP1 server and I am migrating to another Exch 2010 SP2 server. I am looking to migrate the old public folder data to a newer public folder database on the SP2 server. I have gone into Public Folder Management and added the
new server as a replication partner in properties of the folder, under "Replicate content to these public folder databases". After doing this, I don't see any replication occurring from the 2 servers. I turned on diagnostic logging on
both and I don't see any errors being created, just seem like nothing is happening.
What should I look for to troubleshoot this further?
Thanks in advance.Hi JoeyC,
From your description, I would like to clarify the following things for troubleshooting:
1. Make sure that Mail flow is working between two servers.
2. Please refer to the following article to confirm that the configuration is right.
Configure Public Folder Replication
http://technet.microsoft.com/en-us/library/bb691120(v=exchg.141).aspx
What's more, here is an article about scripts to move public folders to a different database or server for your reference.
Move Public Folder Content from One Public Folder Database to Another Public Folder Database
http://technet.microsoft.com/en-us/library/bb331970(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Public Folder migration (2010 - 2010) replication issues
Hi all,
I'm currently migrating from one exchange 2010 SP2, to another exchange 2010 SP2 server, and all is complete apart from damn public folders.
Via EMS I ran
.\AddRelicaToPFRecursive.sp1 -TopPublicFolder "\" -ServerToAdd "NewEXC10"
And I left exchange a day or so to chug along through the 1GB of public folders. I went to check the replication by running
Get-PublicFolder -Recurse | fl Name, Replicas
And I get:
Name: IPM_SUBTREE
Replicas: <>
Name: All Public Folders
Replicas: <Old PFDB. New PFDB>
Name: Meeting rooms
Replicas: <Old PFDB>
Name: Company Contacts
Replicas: <Old PFDB>
and this goes on for every sub folder under the public folders. I also tried
Get-PublicFolderStatistics -Server "OLDEXCH10"
Get-PublicFolderStatistics -Server "NEWEXCH10"
So I could get the item counts, in case everything had copied over but is not showing folder structure.I get
OLDEXC10
Name ItemCount
All Public Folders 0
Meeting Rooms 137
Company Contacts 43
NEWEXC10
Name ItemCount
All Public Folders 0
/o=domain/cm=addres...0
I've not gotten any errors in the event log, and attempted to initate the replication again, but with the same results. Can any one please help?
Many thanks,Hi,
To troubleshoot this issue more efficiently, I need to clarify one thing.
Did you delete an Exchange 2003 server before?
If you had uninstalled the legacy Exchange server, please check if there is an empty Servers container under the administrative group container. If it is there, please remove the empty servers container to check the result.
If you didn't remove Exchange 2003 server in your organization, you can check the following suggestions.
Please check if the mail flow between two servers was working fine.
From the output of ruing the Get-PublicFolder -Recurse | fl Name, Replicas cmdlet, I noticed that the public folder Meeting rooms and Company Contacts didn't have replicas on the New PFDB. You can add the New PFDB to the replica list via Public Folder Management
Console.
After that, please set the public folder replication schedule to Always Run.
Did you update the public folder content using the Update-PublicFolder cmdlet? If not, please run this command to check the result.
If the issue persists, please increase the Diagnostic Logging Level for MSExchangeIS\9001 Public to Expert to check if there is any related errors to narrow down the issue.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Public Folder Deletion/Removal and Replication
Hi All
Overview:
I have a single DAG with 3 Members with all roles on each server, each has a Public Folder and is replicated, ie; PF1, PF2 & PF3
the edb on PF1 has grown very large compared to the other 2 almost out of freespace (whitespace issue i think), so I plan to remove it whilst leaving PF2 & PF3 intact, then i need to re-replicate to an newly created PF1 so i'm back
to having all 3 servers replicating the public folder DB
I plan to point everyone to PF2 as they are currently split between PF1 & PF2 along with the DBs.
Can someone guide me through the process, I've looked at Removing public folders but nothing gives me a good guide in my scenario ?
ThanksHi,
Based on my understanding, you want to remove PF1, however you didn't want to interrupt the clients from accessing public folders, so you would like these users to access PF2. If I misunderstood your concern, please let me know.
Before you delete PF1, please specify PF2 for mailbox databases on the Mailbox server where this PF1 reside. After you recreate a new PF and configure Public Folder Replication, you can specify this new PF for mailbox databases to get it back when all data
have been replicated.
Here is an article about how to change the default Public Folder Database for a Mailbox Database for your reference.
Change the Default Public Folder Database for a Mailbox Database
http://technet.microsoft.com/en-us/library/bb629522(v=exchg.141).aspx
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx -
Public Folder Migration 2007 to 2010.
Hi,
I have searched through the forums (and Google) and not found anything that works.
I have a Public Folder database on an Exchange 2007 server that I’m trying to move all the replicas to my Exchange 2010 PF database.
I have done the following:
Added the 2010 PF database to the replicas of the folders on the 2007 database and waited several days for it to replicate.
I have 7 PF’s that will not completely replicate everything.
Run the MoveAllReplicas.ps1 (This removed the 2007 server as a replica on the folders and left only the 2010 server.)
When I run a Get-PublicFolderStatistics on the 2007 server I still see 7 PF’s that I cannot seem to get to move/replicate to 2010.
I have tried adding them (2007) back as a replica and “Update Content” but it’s not completely syncing.
I have turned up the logging and all I can find is the below. (I do not have a folder called 1-2754C9AEF1C.)
Error 0x8004010f occurred while generating an outgoing replication message.
Type: 0x4
Folder: (1-2754C9AEF1C)
Database "PFdatabase".
I’m looking for an article that will help me figure out and fix this.
If it’s a corrupt message/items (most of the 7 PF’s are calendars), then I’m looking for an article on how to find the specific items and remove it.
If I cannot find and fix the item causing the issue then I would like to understand how to delete the 7 PF’s on 2007 without deleting what has replicated to 2010.
Any help would be appreciated.
KevinHello,
Please try to refer to the following article to find bad item, and delete them. Replicate all other public folder on the affected PF database.
http://blogs.technet.com/b/bill_long/archive/2010/05/27/how-to-identify-bad-items-in-public-folder-replication.aspx
Or you can refer to the following steps to do it:
=======================================
1: Use PFDAVAdmin to dump the Folder ID (ptag_FID) of all the public folders in the affected PF Database.
a. Download the tool PFDAVAdmin. Run the PFDAVAdmin tool and go to File -> Connect, connect to the server and choose the public folder database.
b. Choose Tools -> Options, enable Logging to a file, choose a directory to save the log.
d. Select your top level folder, go to Tools ->
Export Properties. Choose only PF_FOLDER_PATHNAME and ptag_FID, type a name for Output log file such as PublicFolder.TXT, select “Selected folder and subfolders”, then click OK to export the log file. If either properties does not exist, please type
the property name in the box besides “Add property to list” button and then click “Add property to list” button to add this property to list.
Step 2: recreate the PF database:
Please create a new PF Database, then move all good public folders to a new PF database and leave the corrupted/deleted public folders on the original PF Database.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support -
Issues with Public folder migration
Hi,
I'm at the end of an Exchange 2007 to 2010 migration. 99.9% of mailboxes have been moved to the 2010 Mailbox server. The environment is : 2007 SP3(1 X CAS, HT and MBX), 2010 SP3 (1 X CAS, HT, and MBX). I'd really appreciate some help on some Public folder
replication issues:
I have replicated the default public folders across using:
AddReplicaToPFRecursive.ps1 -Server 2007MBX -TopPublicFolder "\"
-ServerToAdd 2010MBX
1) When I get public folder statistics from each Exchange mailbox, there are a few public folders where there are 1 or 2 items on the old server that are not on the new one. There is one public folder on the new server that is not on the old one. I've
updated the hierarchy but that hasn't helped. Is it possible this is because of the folder being created on the new server later on? Is there any way to easily find the folder location in a complex hierarchy?
2) When I try to get public folder statisctics on the 2007 MBX server, I get the following:
[PS] C:\Documents and Settings\ha>Get-PublicFolderStatistics >d:\test\test2
.txt
WARNING: Object
000000001A447390AA6611CD9BC800AA002FC45A030002640DAF3EE76D4783F6C0C0CD5AD03F015
6AA8A1ECE0000 has been corrupted and it is in an inconsistent state. The
following validation errors have occurred:
WARNING: The Name property contains leading or trailing whitespace, which must
be removed.
WARNING: Object
000000001A447390AA6611CD9BC800AA002FC45A030002640DAF3EE76D4783F6C0C0CD5AD03F015
6AA8A1EDA0000 has been corrupted and it is in an inconsistent state. The
following validation errors have occurred:
WARNING: The Name property contains leading or trailing whitespace, which must
be removed.
WARNING: Object
000000001A447390AA6611CD9BC800AA002FC45A0300789C48D2424955459FDBE1D59E103FF6000
0000652320000 has been corrupted and it is in an inconsistent state. The
following validation errors have occurred:
WARNING: The Name property contains leading or trailing whitespace, which must
be removed.
How do I find the object referenced by the series of numbers (for example, 000000001A447390AA....)?
I'm also seeing some backfill events (even ID 1020) on the 2010 Hub transport.
3) Which System Public Folders should be replicated from 2007 to 2010 prior to moving them using the moveallreplicas script? At the moment, the following are replicated between both servers:
StoreEvents (Old server), Schema-root, Schedule + Free Busy (and sub folders), OWA Scratchpad (Old Server), Event's Root, Offline address Book (/o=Exchange2003/cn=addrlists/cn=oabs/cn=Default Offline Address List & EX:/o=Exchange2003/ou=Exchange
Administrative Group (FYDIBOHF23SPDLT) )
Other system public folders are not replicated.
Thanks,
HAHi,
1) You can use the Get-Publicfolder -Recurse | Format-List Name, *path cmdlet to check the parent path of public folder.
2) You can use the Get-PublicFolderStatistics | fl name, *identity command to get the identity of public folder. View the list of identity you get, and check if you can find the following object.
000000001A447390AA6611CD9BC800AA002FC45A030002640DAF3EE76D4783F6C0C0CD5AD03F015
6AA8A1ECE0000
3) When you migrate public folder from Exchange 2007 to Exchange 2010, you need to replicate the following system public folders, you can remove the others.
SCHEDULE+ FREE BUSY, OFFLINE ADDRESS BOOK and EFORMS REGISTRY(if you use Organizational Forms)
Here is a related thread for you reference.
https://social.technet.microsoft.com/Forums/exchange/en-US/236fbd47-6907-4bb7-8f44-aec8acfa5cac/public-folders-system-folder-replication-from-exchange-2007-to-2010?forum=exchange2010
Best regards,
Belinda Ma
TechNet Community Support
Maybe you are looking for
-
Is there a way to leave the notification center open
Hello all, I wondered if there was a way to leave the notification center open in OS 10.8.1. Maybe via the terminal? I am using a 30" monitor and to me it would make sense to have NC alway open. Thanks a lot. Cheers.
-
So, I was about to shut down my MBP. I clicked the Apple icon to shut it down, and instead of the drop down menu, the whole screen suddenly turned gray and a window popped up that told me to restart my computer. I tried restarting it, but I couldn't
-
After checking my Airport express icon, I found 3 other networks which I never created. Is it possible that others (I live in an multiplex apartment) have somehow breached my security and are using my internet connection? The Apple Airport widget con
-
Checkbox with vertical label - FB mobil app
How can I create in Flash Builder a checkbox with a vertical label. Has someone an example code? The label should be under the checkbox (but in center): CheckBox L A B E L Great thanks, M.
-
sorry, i put my question in the title! my correctly entered restrictions passcode is no longer recognized after update. getting "failed attempt" error message after entering my (used daily and not forgotten) restrictions passcode. trying to turn rest