Public folders are not in sync after settting up Replicas between Exchange 2003 and 2010

I have setup Public Folder replicas between the 2 Exchange servers and I can see all the top and sub level folders.
For those mailboxes that were migrated over to Exchange 2010, I have noticied a lower number of item contents in these fodders when views from an Outlook client whose mailbox had been migrated over to Exchange 2010.
On Exchange 2003 System Manager, if I properties one of the Public Folders, under the Replicataion tab, I can see the old and new server there. On the Exchange server 2003 box, I can see the last update reviced was a few weeks ago.
I did see an option to synchronize content but I am not sure which server to run this one from. The Exchange 2003 or 2010 server.
There is also a Resend Changes... option. Should I use this instead?
Can anyone advise?

Hi,
The "Resend changes" and "Synchronize content" options in Exchange 2003 ESM are used to initiate hierarchy and content replication.
To update public folder hierarchy and content from Exchange 2010 side, you can use the following commands.
Update-PublicFolderHierarchy
Update-PublicFolder
Please run the Get-publicfolderstatistics cmdlet to get public folder details such as item count, this information will help you compare content replicated between the source and destination servers.
Besides, here is a blog about public folder replication troubleshooting for your reference.
http://blogs.technet.com/b/exchange/archive/2006/01/17/417611.aspx
Hope this is helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Similar Messages

Public folders are not wisible in exchange 2007 EMS

Hello!
I'm experiencing some troubles with public folders. Few months ago I migrated to exchange 2013 CU3, server OS is 2012R2. All public folders are working OK, users can see them in outlook, can send mail to and from them. But in EMS I cannot see public folders
structure. When I'm trying to create new folder, there is error
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00
Test
Failed
Error:
There is no existing PublicFolder that matches the following Identity: '\'. Please make sure that you specified the correct PublicFolder Identity and that you have the necessary permissions to view PublicFolder.
MapiExceptionUnknownUser: Unable to make connection to the server. (hr=0x80004005, ec=1003)
Diagnostic context:
Lid: 16280 dwParam: 0x6BA Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x6BA Msg: EEInfo: ProcessID: 5368
Lid: 12696 dwParam: 0x6BA Msg: EEInfo: Generation Time: 2014-02-21 09:41:29:149
Lid: 10648 dwParam: 0x6BA Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x6BA Msg: EEInfo: Status: 1722
Lid: 9624 dwParam: 0x6BA Msg: EEInfo: Detection location: 390
Lid: 13720 dwParam: 0x6BA Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6BA Msg: EEInfo: NumberOfParameters: 2
Lid: 8856 dwParam: 0x6BA Msg: EEInfo: prm[0]: Unicode string: vls-mail4.vl.veb
Lid: 8856 dwParam: 0x6BA Msg: EEInfo: prm[1]: Unicode string: SERVER_NAME
Lid: 23065 EcDoConnectEx called [length=203]
Lid: 17913 EcDoConnectEx returned [ec=0x3EB][length=56][latency=0]
Lid: 19778
Lid: 27970 StoreEc: 0x3EB
Lid: 17730
Lid: 25922 StoreEc: 0x3EB
Exchange Management Shell command attempted:
New-PublicFolder -Name 'Test' -Path '\' -Server 'server_name'
Elapsed Time: 00:00:00
With powershell I have following
Get-PublicFolder -Server server_name
Get-PublicFolder : There is no existing PublicFolder that matches the following Identity: '\'. Please make sure that you specified the correct PublicFolder Identity and that you have the necessary p
ermissions to view PublicFolder.
At line:1 char:17
+ Get-PublicFolder <<<< -Server server_name
+ CategoryInfo : NotSpecified: (0:Int32) [Get-PublicFolder], MapiOperationException
+ FullyQualifiedErrorId : 9416A968,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
Checked ADSI, all settings are correct. Application and system logs on server shows nothing.
With PFDAVadmin I can see all PF's structure. Permissions are set correctly.

Hi,
I recommend you refer to the following article to migrate the PF from exchange 2007 to exchange 2013:
Migrate Public Folders to Exchange 2013 From Previous Versions
Exchange supports moving your public folders from the following legacy versions of Exchange Server:
Exchange Server 2010 SP3
Exchange Server 2007 SP3 RU10
Thanks.
Niko Cheng
TechNet Community Support

Network account public folders are not shared?

Ok - I have posted before... but I have done more looking and have confirmed:
When I log into my mac using a network account, my public folder is not shared for guest users. I have set the permissions for my Public folder: chmod -R 0777 /Public but this does not help - the share is not visible. I can only imagine that there is a config file somewhere... maybe accessible through netinfo? Does anyone have any idea?
Thanks,
Davod

Heh... no problem.
Well, I am the network administrator.
Since the network account(s) I am referring to are MS Active Directory accounts (opposed any other LDAP or OS X Server Open Directory accounts), there is no other NetInfo database other than what is local to the Mac workstation.
I don't know why Apple thought it was more secure to lock down file sharing like this. I say that because the alternative (that I have seen in practice anyway) is to have all users run as an admin account all the time. Then when users want to access a coworkers files over the network, they are sharing thier (admin) account passwords to do so. It just seems really backwards to me is all. Run as least privilege. I always thought that was computing 101.
Anyway, this question is expanding, because there are scenarios where a user will get external hard drives from a client, and plug them into thier Mac. THey may want to have a coworker access some of the files on these drives for assistance with the job or whatever... but the drives do not show up just as the user's public folder does not show up.
Has anyone had good luck using a Preferences Panel applet called SharePoints? It seems like it could help me to solve this sharing dilema...
Thanks...

My add-ons are not running anymore after upgrade to Firefox 3.6.13 and the add-on page crashes efey time I open it.

E-mail notifier and weather forecasts are not visible anymore in my taskbar.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button (in Firefox 4: right-click the extension -> "Find Updates") to do a compatibility check.

Data sync between exchange 2003 and exchange 2013

Need assistance on a general direction.
There is a 2003 domain with exchange 2003 currently in use. On this domain there is also a contact management application that is heavily integrated and cannot be update at this time. I would like to bring up a new 2013 exchange server.
Is there a method that I could have user data synchronized between the 2013 exchange data and the 2003 exchange? In this manner users could use the 2013 exchange as primary and the Contact manage application could use the sync copy of exchange 2003. For
now I am only concerned about he the calendar however I am sure the other information will need to be sync as well.
Please let me know. Thank you.

Hi There,
Once you install Exchange 2013 it will use the same data your Exchange 2003 is using \ seeing because both of them use Active directory for Directory information.
Exchange 2013 will see all the users that are 2003 without you needing to sync \ move data.
If you need to users to be on Exchange 2013 and keep Exchange 2003 all you need to do is move the mailboxes to Exchange 2013.
Cheers,
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Are there any known issues with speed between excel 2003 and 2010 when using WAAS?

Request asked by customer. Thought I would run this by the forum first.
Can you please raise a ticket with Cisco TAC asking why Excel files in 97-2003 file format cannot be fully optimized when compared to the same file being saved in the latest file format?
When using the latest file format, the user experience is amazing and up to 100x faster to open and save files. Our testing has identified an issue with the older file format.

I deployed WAAS about 3 years ago. Part of the deployment was before and after testing. When the users used Office 2010 the results were good. When they used Office 2003 the results were terrible. Some files took minutes to open, some never opened. Solution was to upgrade to O2010.
Hope this helps.

Exchange 2003 to 2010 Migration Active-Sync & OWA

I am in the process of migrating from Exchange 2003 to Exchange 2010. I have a co-existence running currently. I have moved 1 mail box over to the new exchange server (a test account I created). I have 2 questions, one about OWA and the other about Active-Sync/Mobile
access.
1. When I log into my internal OWA site I can access the webmail just fine. However when I try to go to my external OWA site I get a HTTP Error 404. I have setup the weblink https://webmail.company.com in my external DNS record. However the internal link
says it is https://webmail.company.com/owa. Is there something additional that needs to be setup in IIS for the external site to work or only after the migration is completed?
2. I tried adding the account I migrated to my cell phone for mail but I just get a "Connection to server has failed" message. The internal and external link for mobile access is both the same and setup in external DNS https://mail.comapny.com.
Is this a feature that only works after the migration is completed? I have ports 80,443,143,25,993 open in my sonicwall for e-mail services. However the IP is still set to my old exchange server. Is it possible to have 2 settings the same in sonicwall with
2 different IP's? Last time I tried it with migrating my VPN neither VPN server worked after that.
Any help and insight would be greatly appreciated. I am new to systems administration and this is my first exchange migration

Hi,
Here are my answers you can refer to :
1. To deploy OWA in the Exchange 2003 and 2010 coexistence, we need a legacy namespace for the Exchange 2003 server.
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2009/12/02/3408921.aspx
Additionally, for the 404 error, I recommend you check the IIS log to find the root cause:
http://support.microsoft.com/kb/943891
2. I recommend you deploy Exchange 2010 in the "Internet Facing AD Site" and Exchange 2003 server in the "Non-Internet facing AD site": set the external URL in CAS 2010 and point mail.company.com to Exchange 2010 server IP address.
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2009/12/08/3408985.aspx
thanks,
Angela Shi
TechNet Community Support

Message looping between Exchange 2003 & Exchange 2010 after domain type changed to internal relay

Hi
We have a coexistence environment where we are currently migrating from Exchange 2003 to 2010 and have 80% of the users already on the Exchange 2010 platform. This is all within the same AD forest, let's call it FOREST1.AD.
The problem I'm seeking help about is a message routing problem we had this morning where messages bound for the Exchange 2003 users started looping between Exchange 2003 and Exchange 2010. The problem started as a result of changing the accepted domain
type to 'internal relay domain' for the purposes of establishing SMTP namespace sharing with an external Exchange environment (different forest, let's call it FOREST2.AD). The expectation was that after changing the domain type from authoritative to 'internal
relay domain', Exchange 2010 would route messages for unknown recipients to the external environment and that would be the only effect of the change. The message routing to the external environment worked completely OK. However, later we noticed that Exchange
2003 stopped delivering messages to its local users and started routing them to Exchange 2010 which would route the messages back to Exchange 2003 as that's where the recipients existed, only to have Exchange 2003 send them back to Exchange 2010 again.
The Send connector to route the messages, for the shared namespace, to the external environment used the Exchange 2010 server as the source server. It makes sense and is expected that Exchange 2003 would send messages for any unknown recipients to Exchange
2010 for onward delivery via the Send connector. But it is not expected for Exchange 2003 to not deliver messages to its own users using the store driver and instead routing them on to Exchange 2010.
We fixed the problem by reversing the change and not only changed the domain type back to authoritative but also removed the Send connector for the specified shared namespace. However, we do need to understand why this problem happened and how to stop it
from happening.
We did test the shared SMTP namespace configuration using a test domain before applying the change to the domain that is used for production email traffic. Test users on Exchange 2003 with email addresses on the test domain did not experience this looping
problem. This has been tested again after the production domain experienced the problem and there is no looping for the test domain. The only difference I noticed between the configuration for the test domain and the production domain is that while both domains
existed as accepted domains of type 'internal relay domain' in Exchange 2010, there was a difference in configuration in Exchange 2003 where the test domain was not present on the recipient policy at all and the production domain was present there.
This also makes me wonder if Exchange 2003 and Exchange 2010 in the same organization keep a separate configuration to determine which domain they are authoritative for. When you install Exchange 2010, it does add all the domains on the recipient policies
to the accepted domains configuration but any new domains you add in accepted domains in Exchange 2010 are not added to the legacy recipient policy object.
Can someone please help clarify these grey areas and explain why the message looping was created and how to avoid it. I'm happy to provide any further information.
Thanks
Nauman.

Hello,
Why do you want to use the 'internal relay domain' authentication?
Thanks,
Simon Wu
TechNet Community Support

Exchange 2013 public folders are sending read receipts for items viewed in public folders

We have Exchange 2013 with public folders. These public folders are used for a large amount of shared contacts. When a user goes into the public folders and double clicks on a contact to view it, Exchange dispatches a read receipt to all users
that are configured as publishing editors to notify them that a certain contact was read. How do I disable this option?

hi again dear.. :)
"At first, I would like to say the
read Receipt is not sent out by the device, it is sent out by the Exchange server. This is how it works and what happens:
1.
E-mail with request for send
receipt is received on the Exchange server;
2.
E-mail is synchronized with Windows Mobile based device using Exchange
ActiveSync;
3.
When e-mail is
read on Windows Mobile based device the read status is synchronized back to the Exchange server;
4.
The Exchange server creates and sends out the
Read Receipt when receiving the Read status update from the device;
The above is how this is implemented and there is no functionality which allows preventing this from occurring on the Mobile device.
It seems that there is an alternative method to disable RR using transport rules. However, it will at the risk of the filtering out other messages
with the same subject.
Towards the third party mobile clients that support RR and DR, you might consider using Flexmail 4.11. It’s impossible to deactivate ActiveSync
RRs in Exchange server 2007/2010."
also
One way to stop read receipts being triggered through client side configuration on the mobile is to use the option "Don't Mark Read on server".
I have tested this successfully using this option in the TouchDown mail client on Android.
Not sure if the standard or other mail clients do support this option, TouchDown certainly does and it works.
The side effect obviously is, that the read status isn't synced back to Exchange anymore:"
hope now i r clear... one way or the other... you need to send a feed back or define a transport rule... but that again may create problem with the same subject :)
Regards Shah. MCITP, MCMA, MCTS No claims (try at your own risk)

Mail account folders are not synchronized

Mail account folders are not synchronized. How do I do this?

Ok Istart understing.
There is an issue with icloud Drive, the part called "mail".
I disabled that part and the rules created by experiment were gone.
So I restored my synced rules and smart folders plist in the V2 Maildata folder and all were like before.
So I tried to reactivate the iclodudrive mail part and the problem was again there. The smart folders where gone again and the rules were now mixed with the ones created by experiment.
So I deactivate icloud mail option on my iphone and my ipad, and redone the restore the synched rules and smart folder.
After that all seems to be fine.
Now I have even reactivated the mail icloud option on iphone and ipad.
I suppose is definitely a bug.
I remember that my mac popped up some strange message saying there was a problem with icloud drive.
I will notice if this happen again to see into the log what is telling for real as I suppose that is the cause that messes up my email.

My new folders are not visible in Finder

New folders (generated by a application, SABNZB+, that runs in the background as a web service) will only show up in Finder once I have run a search in Finder and are not visible before. I have tried a disk repair and a permissions rebuild.
Any ideas anyone?

Yes they do, no problems there.
I am starting to believe it might have to do with the fact that the folders are created by an unarchiver that reassembles files after they are downloaded from my newsgroup. The strange thing is that there never used to be a problem, it started somewhere around the second update to mountain lion. But it could also be a new version of the application SABNzb+, I am not sure.
What is also weird is this: I can find the folder when doing a search in Finder, then open the folder, all files are there and the folder is then visible normally.
Edit: The files are reassembled by the unarchiver on the main Macintosh HD, then moved to a different volume and deleted from the originating volume.

AR Invoice Line Numbers and Sales Order line numbers are not in Sync.

Hi,
There is an AR Invoic with 2 lines and SO with 2 lines. The line numbers on the Invoice and SO are not in Sync. SO line No 2 is Invoice line No1 and SO line No1 is Invoice Line No2. What determines the Invoice line numbering?
Thanks

Hi,
Goto the T.Code "VOV7".
Select your item category.
Details.
Maintain the Completion rule as "A(Item is completed with the first reference)".
Save.
If you do this after the follow on document is created,the item is completed and you cannot reject the item.
For your second question,
Goto the T.Code "VTLA".
Select your valid combination.
Click on item.Select your item category.Details.
There is a check box called as "Update document flow".Tick that one.
Save.
Regards,
Krishna.

"My folders" and "Shared Folders" are not appearing

Hi All,
"My folders" and "Shared Folders" are not appearing after integrating with BI server(11.1.1.1.5). Any help?
Regards,
Kishore P

Tgara wrote:
There are plenty of apps in the App Store that can do what you want, and many are free.
There are not currently (or at least I haven't found any) any weather apps that will appear in the Notifications Center the way the included app does on the iPhone. It's not a big deal for me but I can understand the people who want it.

Pictures are not being delivered after saying delivered on iMessage.

Pictures are not being delivered after saying delivered on iMessage.
Txting through iMessage works fine. Pic's won't send.
I turned on and off everything and did all the necessary trouble shooting.
I'm on a Verizon 4S. and I'm sure Verizon has nothing to do with iMessage system, since it's on its on server.

bump

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

Public folders are not in sync after settting up Replicas between Exchange 2003 and 2010

Similar Messages

Maybe you are looking for