Public Folders calendars updates and refreshing issues

Hi,
We have calendars we use under the Public Folders, but for some users it does not want to refresh right away, so user A inserts an entry in one of the Calendars, they do not see the entry they just saved inside the calendar at all. They try to add the same
entry again they get message are you sure you want to delete this entry !!
But if they add an entry and go back to mail view and go back in calendar view on their Outlook 2010 they sometimes see the entry they just made and sometimes double entries for same event as well because of the "delete this entry " message.
So the public folders calendars are not refreshing right away when users are entering an event, and also at instances other users will not be able to see the event either till they close out of outlook and re-open it.
It is bit of a nuisance, found this thread with similar problem but they are talking about exchange 2010 we are on exchange 2013 with CU1 (too afraid to upgrade to CU2 because of all the horror stories).
Is there any other way to have these public calendars that might refresh faster instead of using the Public Folders, if i am not mistaken MS has always tried to get away from using Public Folders and their development has been poor.
http://social.technet.microsoft.com/Forums/exchange/en-US/f96df4f4-a554-4b4e-a7bd-c9f639b09216/public-folders-calendar-extremely-slow?forum=exchangesvradminlegacy

Few things :
If i do decide to jump to CU3 , can it be directly from CU1 to CU3 jump ?
- I have not used resource mailboxes but are they not just "mailboxes" i want users to be able to see the calendars and the events posted in them, these resource mailboxes seem to be more geared towards booking a room or some multimedia equipment.
Yes. You can go straight to CU3.
Sure, they are just mailboxes, but users can open the shared calendar. Most people probably use them for booking - true, but you can use it the way any want of course and keep it simple.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

WIndow scrolling and refresh issues.

I am having problems with intermittent window scrolling and refreshing. I noticed it first in Safari but I have confirmed it is happening in other applications as well. Typically I have no problems with window scrolling and refreshing. At times however, it becomes sluggish. For instance, I will be reading a web page and attempt to scroll down and the there will be a delay of approximately one or two seconds before the window updates. This occurs whether I am using the keyboard, trackpad or mouse to scroll. There is no video tearing or graphics artifacts, just a delay followed by an updated window. During this time, moving windows also results in a delay of one or two seconds. Again, there is no tearing or artifacts, the window just appears in it's new positioning seconds later. This unfortunately makes the system near unusable as I can not accurately scroll or position. The problem occurs whether or not I have a significant number of applications and the CPU and memory usage is not abnormal. Restarting solves the problem temporarily but it still returns. Oddly, activating show desktop or show all windows via Expose eliminates the problem for some time as well until it returns later. My system is up to date with 10.5.6.
Seems like a problem with WindowServer. Has anyone seen this before or have any suggestions?

Did you ever get an answer to your window scrolling issue. My new PowerMac seems to always have this issue now. (I just moved to the Intel platform from the G4.) Thanks for any help you can give.

Yosemite calendar syncing and other issues

Hello all,
I am running latest versions of IOS 8 on IPAD Air2, iPhone5S and latest Yosemite on IMAC intel last year model.
There are few issues here....
In Mavericks when I edited an event in calendars it would show up almost immediately on my phone. No more. In Yosemite I would edit an event and it seems like a 50/50 chance it would RETAIN in the Yosemite calendar. And if it does, it does no sync across devices. This is a pain in my ***.
Second issue is when I use the 'shutdown' feature top left corner of OS X, the unit would begin to shut down then the spinning logo would keep spinning and unit would never shut down. The energy saver would take effect. I come from work thinking it was shut down, press the power button on back and the unit 'wakes' and continues with spinning shutdown logo.
Third issue, my iPhone randomly asks for the iCloud password, even though it is enable across all of my three devices.
Other than these issues I love Yosemite and IOS 8, but these are really kicking me from behind.
I appreciate any and all help!
Thanks

I have the same problem. Events entered on the macbook are not going to the cloud.

Photoshop PSD files will not open in AE or PREM?? This was fine in CS6 and CC - just did the CC2024 update and now issues-any help much appreciated

Titles says it all really,
Recently upgraded to the 2014 CC update and now i can't send PSD files…or any files for that matter into Premier or AE. If i save the file in Photoshop CC2014 then i can see it in finder etc, but i try to import and i get the notice 'importer reported a generic error'
please help i have work to finish

I am having the same issue. I can create a single layer file in Photoshop and it imports fine. If I create a file with 2 layers it crashes Premiere cc. Premiere will not display the box with options to import single layer, sequence etc. Any ideas?

ICloud Calendar Timezone and Refresh

Perhaps another iCloud bug here...
I travel a lot, and cross a lot of time zones. It'd be nice if my iCloud calendar could keep up with me!
What I appear to have discovered, is that even though I change the timezone on my Mac (Sys Prefs Date/Time), and change the timezone in my iCloud preferences, the iCloud Calendar will not refresh itself to show the proper days or times....doesn't refresh if I hit the refresh-calendar button, either.
In order to get the event to properly refresh, I must first double-click the event, and then close the event.... A bit of a pain if there are a couple dozen events needing changing in each timezone...
iCal on the iPad and iPhone does not seem to have this problem.
Thoughts? Fixes?
I'm submitting feedback to Apple on this...
Bob

Update...
The refresh button on the calendar does not work...
However, after making a timezone change, if I refresh the calendar page by clicking "Reload Page" on Safari, the calendar then properly reloads with the proper timezone changes for the events on that calendar...
Bob

Migrating public folders to exchange 2013 hebrew issue

I am migrating public folders to exchange 2013. half of them a named in hebrew.
The migration fails, the error is character related.
Is it possible at all to migrate hebrew named public folders?

Hi,
Did you got the error message mentioned in the following thread?
http://social.technet.microsoft.com/Forums/exchange/en-US/8b383a46-b710-4fc0-aa0b-e52f288cf93d/e2010-to-e2013-public-folders-migration-failed?forum=exchangesvrdeploy
If so, please check if they are mail-enabled public folders. If they are mail-enabled public folders, please make sure there are no invalid characters in alias.
Based on the description, you couldn't migrate public folders named in Hebrew, other public folders could be moved successfully. If I misunderstood your concern, please let me know.
If the issue persists, I'm afraid you need to rename these public folders in English.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Helix bios update and firmware issue

Hello. I recently had an issue - my keyboard dock stopped working entirely and I had the fan issue. I installed the firmware update and also updated my bios - with success, the keyboard dock now works.,
The first time I restarted my Helix 3xxx series.... it didn't work.
The issue I received is on windows 8.1. I loaded, logged in... and received a black screen. The cursor was there, and I could do CTRL-ALT-DEL, but nothing else loaded.
I looked it up, and previous lenovo laptops had this issue when upgraded to 8.1 - black screen, cursor, nothing else.
The issue with those laptops was with an AMD display driver - but I do not possess said driver. After going through their solutions many times, nothing works. I can run it in safe mode with networking, but trying to run standard is without fail. I updated my display drivers with no luck.
I don't know what caused it besides the apparent bios/firemare update. I do not know what else to try.
I can't even do a system restore because I dont have a USB drive to do it with.

F.23 is F.23 despite the discrepancy in the release dates. You have the latest BIOS.

Update and uninstalation issues

I just updated and downloaded Adobe Reader11.0.4, however the older version 10.10.7 is still on my control panel and I cant remove it. What should I do, will this create a problem??

Use the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html
then reinstall 11.0.4 from http://get.adobe.com/reader/enterprise/ and update to 11.0.5 from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5674

Growing file import and refresh issues

1) With files generated by our own MOV/op1a writers, we get different results with different wappers, different OS platforms and versions, and different storage filesystems, both using CC 7.1 and CS6.05
Quicktime files on the Mac, OS 10.7.5 to a Samba share: refresh will only work by putting Premiere into the background then bringing it to the foreground to force the update.
Quicktime files (any codec) on a win7 PC writing to an NTFS share: we get sporadic updates, although in about 98% of sessions, the file will update once or twice after import and then never again during that particular CC/CS6 session. Exiting the program, reopening it and loading the project again will update the duration. After closing the file, the duration updates instantly in both CC/CS6
-- For Quicktime files, it seems like some sort of cache file is written that does not get updatedand premiere looks at this instead of polling the current state of the file.
op1a XDCAM - on PC at least we get a sharing violation when attempting to open, much as in this discussion on the Adobe Community Premiere site: http://forums.adobe.com/message/4746601
op1a AVC-I not tested yet.
2) With Adobe Media Encoder CC doing the writing, we get no joy whatsoever. Only tested on win7/NTFS share
op1a XDCAM on import CS6/CC returns "file is open in another program" error.
op1a AVC-I on import CS6/CC returns "file is open in another program" error.
Quicktime (any codec) file import error or crash.
All types import correctly after the files are closed.
-- seems that the AME openfile() handle type is write-only, so Premiere can't open it for reading.
So...I guess my first question is, what growing file source has this feature been tested with, on which OS and storage filesystems?
There is virtually zero documentation and what little exists is very unspecific or contradictory...

Ken,
There are numerous posts on this subject. Currently LR treats same name, different extension files as sidecars of each other. Check out the numeroues RAW + JPG posts for example.
Import your files into different folders and then move them into the folder you want for now.
Hopefully this behaviour will be changed in the forthcoming 1.1 release mentioned by Jeff Schewe et al.

1.3.5.1 Updated, and Now Issue With Incoming Calls

Since updating to 1.3.5.1, any time I mute the ringer on an incoming call, it mutes the ringer until right before the missed call notification, but then plays the ringer again briefly. This defeats the purpose of being able to mute the ringer in the first place.
Post relates to: Pre p100eww (Sprint)

This occurrs any time I press the volume rocker key to mute the ring of an incoming call. After the initial time when it played an extremely brief snippet of my ringtone (factory installed "Older Phone" ringtone), it has randomly switched between the short ringtone and a electronic squeal noise.
Since I know the slightest software change can kill a seemingly unrelated feature, I'll try to be as detailed as possible. For my phone setup, it is completely stock (phone no.5 after misc. slider/screen/charger door issues, haven't had time to change anything yet) My ringtone volume is set to maximum with vibrate also on, system sounds are also set to maximum with the default tone. I have no non-app catalog programs or patches installed. I use a Touchstone back cover, although the phone was not on the charger when I noticed the issue.
The only downloaded apps on the phone are Pandora, Tip 'em!, Stop Watch, Fandango, Good Food, Mileage Monitor and gDial Pro (which has not been set up yet). With the exception of Pandora, none of these apps have been used since I received this replacement phone. They were all just automatically downloaded because my previous phone had them. I have e-mail accounts through Cox, Yahoo, and Gmail, none of which are synced to contacts, calendars, messaging or tasks. I do have my Palm profile and EAS through my work in a full sync capacity.
Hope this helps.
Message Edited by kx250ryder on 01-07-2010 07:29 AM
Message Edited by kx250ryder on 01-07-2010 07:30 AM

Updating and syncing issues from iPhone to iPad

I have two issues. I just got new iPhone and after creating an iCloud account all my contacts will only appears numbers on my phone (no names attached to the contacts) and now that updated my iPad to io5 nothing will sync with my iPhone. I checked my settings and wifi is on as well as photo stream is on. I'm so confused!

Assuming you are using the same AppleId on both devices (Settings App > iTunes & App stores), you should be able to open the itunes app, select Purchased from the lower menu and download any items you have purchased on the account.

8.0.2 update and Template issues

Here's an FYI & observation after the update to 8.0.2. My machine has both Logic Studio and Logic Express installed. After the software update yesterday, Logic Express startups up by presenting the templates dialog box offering all the templates as would be presented in Logic. Choosing any template not in the Logic Express set understandably creates error after error, but otherwise it seems to be a trivial issue.
Greg

Hey there tjbliven,
It sounds like you are not able to use the dictation feature of iOS 8, becuase the microphone icon is missing. It seems to me like Siri may be turned off, which would cause the icon to not be there:
Siri settings - iPhone
To set options for Siri, go to Settings > General > Siri. Options include:
Turning Siri on or off
That should get the dictation feature back for you.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Safari browser and refreshing issue.

Lets say I am on a forum page, I can refresh the page in two ways. Either I hit the refresh button on top or hit the bookmark page of the same page. This works on my old phone and the replacement, except for facebook issue.
On facebook, it did it this way before the replacement phone from Verizon and on the replacement it doesn't do it. I have to hit the refresh button on top, it doesn't refresh from the bookmark page. Also if I am on my feed, it automatically refreshes and goes to the top, sometimes. Is this a facebook issue or a certain setting. If it's just facebook, I don't really care but I don't want this issue on other Internet pages, kind of annoying.
Thanks, sorry for Grammar issue or if confusing question.

The bookmark button is not supposed to refresh it as of newer iOS operating systems

10.6.4 Update and Bluetooth issue

I just updated to 10.6.4 and my MBPro now doesn't allow bluetooth keyboard or mouse to wake when sleeping. The option to "allow bluetooth device to wake computer" is greyed out. This wasn't an issue prior to the update.
Any ideas?

I am thinking there was a problem with BT and sleeping of MBPs. I have a bluetooth mouse and disabled that feature in 10.6.3
I don't need my mouse to wake my MBP anyway. Sorry I am not much help. Just stating my view.
I just checked my computer...that area is not grayed out on mine and I am at 10.6.4.
Message was edited by: ScorchinScooter

2.2.1 update and call issues

Hi all,
I was very happy with my iPhone and the 2.2 software update, things were running nicely and I hadn't had any troubles, which is why I decided to go ahead and install the 2.2.1 update when it was released - and I have had nothing but trouble...
I live in an area where Vodafone coverage is not great, there are however certain areas where I can go to get almost full reception; this was the first problem that I noticed - I no longer get full reception here, it's now two or sometimes three bars.
The second problem I have is when I go to make a phone call, when the call is establishing it now takes sometimes up to 40 seconds of silence to get to the ringtone! With 2.2 it almost seemed instantaneous, and now there is this massive delay which is infinitely infuriating!
I think this second issue may be linked with the third, which is pretty much the opposite. When I end a call there is another long delay, though not normally as long as the setup delay - 15-20 seconds. Pressing the home button takes me back to the home screen with the green bar at the top saying the call is in progress, pressing the green bar takes me back to the call and allows me to press the end call button again, to no avail. All this whilst the call timer is still counting.
The last issue is with the calls itself... Now when I make a call, about 50% of the time it will drop out in the first 30 seconds of the call, I will not get a call failed message (which I had seen a couple of times in the past); it will just sit there like the person on the other end of the phone has gone silent and the call timer will still be incrementing. This coupled with the call end and redial delays make for an almost 1 minute round trip from the call dropping out to me calling back - this is extremely infuriating!
Now, I thought I could just roll back to the 2.2 update when everything was peachy... How wrong I was; it appears that the baseband has been altered in such a way with the 2.2.1 update that the 2.2 update cannot be restored to the phone, I've even gone to the lengths of jailbreaking the phone only to realise that the baseband cannot be rolled back, even if the firmware is.
So, this puts me in a situation where I have an infuriating phone to use because I cannot roll back to the last known good update for it - it was reasons like these call issues that I moved away from Windows Mobile and Symbion devices. My iPhone was great until this update - I just want it back to good working order!
I've tried restoring the phone, rebooting the phone, restoring to a 2.2 release (gives a #1013 error when trying to update it). Is there any way I can get this back - or is there a 2.2.2 release planned that will solve any of these issues?
Cheers,
--ryan

Have you done a reset (hold the sleep/wake & home button until the Apple logo appears)? A reset will often correct many issues you may have with the phone.
If a reset or restore does not correct the issues, you could try a new SIM from ATT or make an appointment at the Genius Bar to have the phone looked at.
This is a user to user forum. No one here knows when or what the next update will contain.

Public Folders calendars updates and refreshing issues

Similar Messages

Maybe you are looking for