Public Folders credentials prompt after migration to 2013

As part of our migration from 2010 to 2013, we have just moved our public folders across to 2013. In doing this, some, but not all, Outlook Clients are asking for credentials to access the public folders everytime Outlook opens. Looking at the connection
status in outlook while the prompt is open, it is already saying the connection is established. The client still says connected even when cancelling the prompt. This is driving users mad. Our exchange is external to the LAN domain, and have checked the OutlookAnywhere External
Authentication method are set to NTLM. I have created new outlook profiles, cleared windows credential manager on clients, used domain\username as well as UPN, and checked the autodiscover address is correct, all to no avail. The affected clients already
have http://support.microsoft.com/kb/2817371 applied to them.
I am really not sure where to go next. Any help is much appreciated.

Hi,
For the credential issue, I recommend the following troubleshooting:
1. Check if the property Logon network security for the problematic user is set to Anonymous Authentication:
File>account settings> more settings>security
http://support.microsoft.com/kb/2834139/en-us
2. Confirm if the property LmCompatibilitylevel is set to 2 or 3.
http://support.microsoft.com/kb/820281/en-us
3. Change another computer to test one problematic user.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Move mailboxes and public folders from exchange 2007 to Exchange 2013

1. How do i move mailboxes from exchange 2007 to exchange 2013. I have more than 1000 mailboxes.
What is the correct way to migrate. do i need to move a single mailbox. During migration do the mailboxes get corrupted
2. I want to move public folders from Exchange 2007 to Exchange 2013.
I ran powershell commands and got these results please do guide me how to move to exchange 2013.and what are the shell commands
Get-publicfolder
Name Parent Path
IPM_SUBTREE
Get-publicfolder | select AdminDisplayName,FolderPath
AdminDisplayName FolderPath
Get-PublicFolderStatistics | select AdminDisplayName,FolderPath
AdminDisplayName FolderPath
exchangeV1 schema-root\microsoft\exchangeV1
Internet Newsgroups Internet Newsgroups
Get-PublicFolder -Recurse | fl name,replicas > c:\publicfolder.txt
Name : IPM_SUBTREE
Replicas : {}
Name : Internet Newsgroups
Replicas : {MAIL\Public Folder Storage\Public Folder Database}

I have started moving mailboxes , i have tried moving few individual mailboxes to see how things go
MAIL is my exchange 2007 and MAIL1 is my exchange 2013, please do refer the below result
PS] C:\Windows\system32>Get-MailboxDatabase -server mail
Name                           Server          Recovery
ReplicationType
Mailbox Database               MAIL            False           None
[PS] C:\Windows\system32>Get-MailboxDatabase -server mail1
Name                           Server          Recovery
ReplicationType
Mailbox Database 1460777952    MAIL1           False           None
[PS] C:\Windows\system32>New-MoveRequest -Identity '[email protected]' -TargetDatabase "Mailbox Database 1460777952"
DisplayName               StatusDetail              TotalMailboxSize
TotalArchiveSize         PercentComplete
[email protected]          Queued                    363.6 MB (381,217,115 ...
0

Public folders from exchange 2007 to exchange 2013

HI I am new to exchange, i am planning to do the migration of Exchange 2007SP3 UR10 to Exchange 2013 CU7, I want to move public folders from exchange 2007 to exchange 2013. wht is the procedure to move and wht are the commands to know how many public folders
i have.I just want to be aware before the installation so that later i can avoid issues.please do guide me

Hi Quiett,
please find how to move public folders on ttp://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/migrating-public-folders-exchange-2013-part1.html
You can replace your servers names and follow exactly the proedure that is shown there. I strongly suggest to read also the 2nd page (replication) before you start. Please be aware of
Set-OrganizationConfig –PublicFoldersLockedForMigration $True , so you cannot change the source side whle migrating.
Regards,
Martin

Private marked Tasks in Public Folder after Migration 2007 - 2013 hidden

After the Migration of Public Folders from 2007 to 2013 some private marked tasks are hidden.
I see the item with mfcmapi but outlook doesnt show it. I think there is a problem with permission to see private marked items. But there is it possible to set this?
For example Public Delegation in Public Folder Mailbox?
Thanks fpr help

Hello,
At present, I'm afraid there is no way to set public delegation on public folder mailbox.
My environment is coexistence of exchange 2007 and exchange 2013. I check my environment, there is no way to set delegation for public folder in outlook or Exchange server.
Besides, we can't set permission on public folder in outlook.
Cara Chen
TechNet Community Support

Issue removing Exchange 2007 after migration to 2013

After migrating relatively successfully from Exchange 2007 to 2013, I am in the process of trying to decommission and uninstall 2007 from the servers. Through this process I have been following a guide found
here. Our old 2007 servers have been off for over two weeks and it seems like a good time to remove them and reclaim some space. I removed the old OAB and Mailbox DB, however when I attempted to remove the Public Folders so I could take the PF DB out the
following error appeared.
Get-PublicFolder : There is no existing PublicFolder that matches the following Identity: '\'.
I know that there are Public Folders existing as I can see them when I run Get-PublicFolderStatistics:
I've been back and forth across the forums and web and haven't been able to find a solution to this. Ultimately we never have and are not interested in using public folders but they were originally configured when we had a contractor move us from 2003 >
2007 several years ago. What I would like is to remove all traces of this garbage and just be able to uninstall/delete the old servers and move on with life.
Any help is greatly appreciated. Thank you in advance.
Jon Howard

Hi,
Have you tried to use Exfolders tool to remove PF?
More details about exfolders tool refer to the following article:
http://gallery.technet.microsoft.com/office/Exchange-2010-SP1-ExFolders-e6bfd405
Thanks.
Niko Cheng
TechNet Community Support

Microsoft Exchange server and Mailbox box prompt after migration

We are getting prompted to click OK when we open Outlook on the Microsoft Exchange server and Mailbox dialog box.
We just migrated from 2007 exchange to 2013 exchange and the people with windows 7 seem to be able to access exchange through outlook 2010 without getting prompted. Also people who are getting prompted are not able to access public folders and our
XP. Those using windows 7 can access public folders.

Hi,
From your description, I would like to clarify the following thing:
Windows XP does not like msstd:*.domain and must use msstd:server.domain instead.
So I recommend you set this by updating the CertificateName via EMS.
1. If you use a wildcard certificate, please run the following cmdlet:
Set-OutlookProvider EXPR –CertPrincipalName msstd:*.contoso.com
2. If not please run the Set-OutlookProvider EXPR –CertPrincipalName msstd:$null cmdlet. Once done, repair Outlook profiles and check results.
Besides, when there is a Windows XP user, we recommend SAN certificate not wildcard certificate.
Hope my clarification is helpful.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

After Migration Exchange 2013 does not send mail outside the organization

Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin Hossain

What I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25.

After migration Exchange 2013, MBX server, CPU utilization is so high

CPU utilization become so high this morning after migration into Exchange 2013,
Some healthy DBs is getting disccounetced with growing replay Queue length, mounted DB is no issue.
It seems that's short of CPU performance,
Are there any processes to limit or set up to reduce the load of CPU, MBX servers? It's temporary treatment...

What's the CU level you have for your Exchange 2013? Also, please check node runner processor as Node Runner process can cause CPU utilization issue. I would also suggest to check your disk IOPs as it looks like disk IOPs issue to me as well. Thanks.
Regards, Riaz Javed Butt | Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365 | mstechtalk.com

Cannot delete mails in public folders using OWA after applying SP3 RU5

Hello,
we recently applied service pack 3 rollup 5 to our Exchange 2010 server (before it was running rollup 4).
Ever since, when we try to delete a mail in a public folder using OWA we get the message "An unexpected error occurred and your request couldn't be handled". Each attempt also causes error 108 in the application log (Outlook Web App couldn't
connect Exchange Web Services due to a configuration error. Response code = "500".) which is not accompanied by any other errors.
Neither uninstalling the rollup nor restoring the server's system state to a point before installation of RU4 could fix the error. Deleting mails in a mailbox still works fine, it's only within public folders and only in OWA.
Any ideas?

Hi,
Please refer to the following article:
http://support.microsoft.com/kb/2249852/en-us
The issue occurs when the Internet Information Services (IIS) website that hosts the Exchange Web Services (EWS) virtual directory contains a site binding that binds to an IPv6 address.
Note It is a known issue that this configuration may cause an exception .
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Problems adding folders as portlets after migration

We have used the content area migration tool to migrate content areas from one Oracle Portal (3.0.66.5) instaled in Sun Solaris to another with the same version in the same platform.
After migrating thew content area, i try to add a folder portletand when customize the folder i want to publish i retrieve the error:
An Unhandled Exception has occurred. ORA-01403: no data found
Could youy help me, please?
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Harry Wong ([email protected]):
Is this happening with [b]every content area that you import?<HR></BLOCKQUOTE>
I tried my first export/import and that is the result. Searches don't work and text items give error wws-000.
I have shared categories and perspectives declared in shared objects.
I don't know if this is important, but it4s the only special i have done.
Thanks in advance
null

Outlook Authentication prompt after migrating from 2007/2013

I have a very simple environment. 3 new Exchange 2013 servers in a DAG behind a load balancer. Most users are still on Exchange 2007 environment. Autodiscover has been configured for load balanced name. There is no External Outlook
Anywhere connectivity. I have NOT enabled Outlook Anywhere in the 2007 environment. I have a simple Lync 2013 environment. 1 Server in a standard pool with no external connectivity. I have integration with OWA 2013 and Lync working.
All versions of Outlook are at least on the patch level required for Exchange 2013.
My issue is random password prompts in Outlook for some (not all) users with mailboxes on Exchange 2013. This password prompt appears to be coming from the load balanced Outlook anywhere name. I have had a few reports of users on Exchange 2007
getting an error stating they cannot open default set of folders. If I have them exit Lync 2013 client and open Outlook again it works fine. They can then open Lync without issue. Closing and opening Outlook will no longer reproduce the issue.
It seems like Lync is causing an issue here somewhere, but I have no idea where.
Lync BPA completes without any warning or errors. All test cmdlets complete without any errors.
2013 Outlook Anywhere settings:
Name                               : Rpc (Default Web Site)
ExternalHostname                   :
InternalHostname                   : mail.company.com
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
Get-AutodiscoverVirtualDirectory|select *auth*
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
LiveIdNegotiateAuthentication : False
WSSecurityAuthentication      : True
LiveIdBasicAuthentication     : False
BasicAuthentication           : True
DigestAuthentication          : False
WindowsAuthentication         : True
OAuthAuthentication           : True
AdfsAuthentication            : False
brian smith

I just could not let this go last night. The issue was occurring when I moved a mailbox to 2013.
2 scenarios
#1. Users mailbox moved from 2007 to 2013. Profile has a secondary mailbox that is still on 2007. When entering Outlook they are prompted for
a password into the internally resolvable load balanced name (mail.company.com). If I remove this secondary 2007 mailbox they work fine, UNTIL they try to access anything on 2007 (calendar, Public Folder, another mailbox, etc). When they do attempt they
are prompted for a password.
I have seemingly fixed this error by adding the external URL back to AutoDiscover on 2013 based on
http://support.microsoft.com/kb/2839517<u5:p></u5:p>. Even though we have no intentions of using Outlook Anywhere externally.
During this troubleshooting I also changed InternalClientsRequireSsl from false to true. Now I have clients reporting errors in their event log “A fatal error occurred while
creating an SSL client credential. The internal error state is 10013." I do not think changing this to require SSL, but I’m almost scared to change it because this issue
is seemingly resolved.
#2 mailbox that is only accessed as a shared mailbox Mailbox is moved from 2007 to 2013. Users attaching to the mailbox are still on 2007. This works perfectly fine for some. However others receive a password prompt each time they open Outlook.
If the 2013 mailbox is removed from their outlook profile they receive no prompt. If I manually remove the mailbox from their profile and add it back the prompts go away. I have not been tracking client versions, but these last 4 are running 12.0.6691.5000.
I also noticed in checking the connection status all 2007 references are using [Nego] for authentication and mail.company.com is using NTLM. Is this normal? This is the same in my test environment, but I can’t replicate this issue in my test environment
either.
I’m very stumped.
2013 Outlook anywhere config:
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
SSLOffloading                      : True
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : True
2007 Outlook anywhere config:
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
SSLOffloading                      : True
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : False
brian smith

Error in date prompt after migrating from 5.x to XI R2

Hi,
We have migrated from 5.x to XiR2 SP5 and are facing a problem with the date input parameter.
Our users use DESKI , when they try to access thier reports based on Stored Procedure,and the reports having date prompt , they get an error.
In 5.x they used to enter the date as DD MON YYYY , in XIR2 they enter it as MM/DD/YYYY but still we get the error
"The variable is of type date enter its value in the format 9/17/2009 14:50:00 PM"
The users tried this too but still the same error persists. The Oracle.prm and Oracle.sbo file on teh users machine is the same as that of the server.
I am able to recreate this error after logging onto the server and opening DESKi there. This error is occuring only with Stored procedures that take date as input parameter
has anybody faced this issue before, any resolutions for this
Thanks in advance
Shreekantha

Hi,
After analyzing this problem , what we found that no Stored Procedures that take user input are functioning, irrespective of teh datatype of the input prompt.
For all SPs that take user input we get an error saying
Connection or SQL sentence error: (DA0005)
Exception: DBD, ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'PROCEDURE_TEST_WITHOUTDATE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
State: N/A

Signed Email Error on Mobile Devices After Migration to 2013

After we migrate a user to Exchange 2013 SP1 from Exchange 2010 SP3, a users signed email message can't be viewed from their mobile device.
The users receive the following message:
"This encrypted message can't be displayed because this version of Exchange Server doesn't support encrypted S/MIME messages on mobile phones. To view this message, you need to open it on a computer using Outlook."
Is there some additional commands I need to run to allow this through ActiveSync?
I've run this command for OWA S/MIME already:
Set-SmimeConfig -OWAAllowUserChoiceOfSigningCertificate $true -OWACRLRetrievalTimeout 10000 -OWAEncryptionAlgorithms 6602:128

Is it working with iOS or Android or WP?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

My Tasks page in My Site doesnt appear after migration to 2013

We have recently migrated our My Sites from 2010 to 2013. everything has been migrated without issues except that when you click on Tasks in My Site page it takes you to the About me page instead.
This is not the case for new users who are creating their My Site for the first time.
Anyone has had this issue?

Hi CALIG,
Based on your description, your migrated users' MySites will go to "About me" page when click "Tasks" link from quick launch of newsfeed page (e.g. http://mysitehostsite/default.aspx) from mysite host site, but it is working for newly created
user's mysite.
I would suggest you open migrated mysite using SharePoing Designer 2013, see if the AllTasks.aspx page exists, if not, please check if it works with copying one from the newly created user's mysite.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Duplicate folders in iTunes after migrating my library

Hello,
I got a new computer, still Windows XP Pro, and install iTunes 9.0.2.25 in it, and import my library, problem is I'm having duplicated folders (Music Videos, My Top Rated, Recently Added, and so on ...)in iTunes. All my music is there and iTunes is working fine, I just want to find a way to delete the duplicated folder entries, any ideas???

I'm having the same issue. You search and search under support and nothing tells you how to delete the duplicate folders. I've got 3 different Itunes library, music, the list goes on and I need to know where these should really reside in my computer, under my programs\Itunes or what because if I delete one from any of the files to test it the song won't play under itunes. Why is this so complicated? Itunes support provides no instruction on where the files should be and how to get rid of the duplicates without killing the song under Itunes. This is making me nuts and it's eating up an extra 8Gb on my computer.

Public Folders credentials prompt after migration to 2013

Similar Messages

Maybe you are looking for