Public folders: Fatal error TargetMailboxConnectionStalePermanentException has occurred.
Hello,
We're in the middle of a large public folder migration, but we have an error on which we cannot continue.
Our environment is large:
1,1 TB of data
22.000 folders
2,8 million messages
Splitted over 63 PF mailboxes of 1 to 75 GB
Splitted over 5 Mailbox Databases
The first steps went fine, up to migration of most of the data (94%) in al little over 2 weeks.
Some key entries of the logging are:
22-12-2014 13:22:29 [mail02] Copy progress: 2791025/2791842 messages, 1.038 TB (1,141,256,941,697 bytes)/1.038 TB (1,141,805,091,498 bytes), 174/21895 folders completed.
22-12-2014 13:27:35 [mail02] Stage: CopyingMessages. Percent complete: 94.
22-12-2014 13:27:35 [mail02] Copy progress: 2791831/2791842 messages, 1.038 TB (1,141,804,826,907 bytes)/1.038 TB (1,141,805,091,498 bytes), 174/21895 folders completed.
22-12-2014 13:27:39 [mail02] Copying messages is complete. Copying rules and security descriptors.
22-12-2014 20:03:56 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (1/60).
23-12-2014 04:52:55 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (2/60).
23-12-2014 08:37:19 [mail02] Transient error MapiExceptionMdbOffline has occurred. The system will retry (3/60).
23-12-2014 19:33:08 [mail02] Request processing continued, stage LoadingMessages.
23-12-2014 19:34:53 [mail02] Copying messages is complete. Copying rules and security descriptors.
23-12-2014 19:55:31 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (1/60).
23-12-2014 21:59:48 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (2/60).
23-12-2014 22:58:28 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (3/60).
23-12-2014 23:36:09 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (4/60).
24-12-2014 00:01:56 [mail02] Transient error ResourceUnhealthyException has occurred. The system will retry (5/60).
24-12-2014 00:13:59 [mail02] Fatal error TargetMailboxConnectionStalePermanentException has occurred.
25-12-2014 22:40:28 [mail02] 'DOMAIN/Administrators/Admin' resumed request.
25-12-2014 22:40:38 [mail02] Job resumed with status 'Queued'.
25-12-2014 22:40:38 [mail02] Relinquishing job.
Now the status of the request is:
RunspaceId : 1d6f68ea-cca5-4646-ae36-eb13cafd93c1
Name : PublicFolderMigration
Status : Queued
StatusDetail : Relinquished
SyncStage : None
Flags : IntraOrg, Pull, SuspendWhenReadyToComplete
RequestStyle : IntraOrg
Direction : Pull
Protect : False
Priority : Normal
Suspend : False
SourceVersion : Version 14.3 (Build 210.0)
SourceDatabase : Public Folder Database EML
SourceServer : EML.DOMAIN.nl
BatchName :
OutlookAnywhereHostName :
RemoteCredentialUsername :
AuthenticationMethod : Basic
RemoteMailboxLegacyDN :
RemoteMailboxServerLegacyDN :
BadItemLimit : 20
BadItemsEncountered : 3
LargeItemLimit : 0
LargeItemsEncountered : 27
FolderToMailboxMap : {\, \IPM_SUBTREE\Werken\W0500, \IPM_SUBTREE\Werken\W1000, \IPM_SUBTREE\Werken\W2000,
\IPM_SUBTREE\Werken\W3000, \IPM_SUBTREE\Werken\W3100, \IPM_SUBTREE\Werken\W3200, \I
PM_SUBTREE\Werken\W3300, \IPM_SUBTREE\Werken\W3400, \IPM_SUBTREE\Werken\W3500, \IPM_
SUBTREE\Werken\W3600, \IPM_SUBTREE\Werken\W3700, \IPM_SUBTREE\Werken\W3800, \IPM_SUB
TREE\Werken\W3900, \IPM_SUBTREE\Werken\W4000, \IPM_SUBTREE\Werken\W4100...}
QueuedTimestamp : 8-12-2014 15:19:48
StartTimestamp : 8-12-2014 15:32:00
LastUpdateTimestamp : 28-12-2014 15:40:58
InitialSeedingCompletedTimestamp :
FinalSyncTimestamp :
CompletionTimestamp :
SuspendedTimestamp :
OverallDuration : 20.00:31:19
TotalFinalizationDuration :
TotalDataReplicationWaitDuration :
TotalSuspendedDuration : 2.04:18:22
TotalFailedDuration : 4.11:29:57
TotalQueuedDuration : 00:11:44
TotalInProgressDuration : 10.14:39:13
TotalStalledDueToCIDuration : 00:28:26
TotalStalledDueToHADuration : 01:22:51
TotalStalledDueToReadThrottle :
TotalStalledDueToWriteThrottle :
TotalStalledDueToReadCpu :
TotalStalledDueToWriteCpu : 00:56:11
TotalStalledDueToReadUnknown : 22:57:32
TotalStalledDueToWriteUnknown :
TotalTransientFailureDuration : 00:40:50
TotalIdleDuration : 08:32:59
MRSServerName :
EstimatedTransferSize : 0 B (0 bytes)
EstimatedTransferItemCount : 0
BytesTransferred : 1.11 TB (1,220,750,777,478 bytes)
BytesTransferredPerMinute :
ItemsTransferred : 2888617
PercentComplete : 20
PositionInQueue : 1/1 (Position/Queue Length)
PreventCompletion : True
FailureCode :
FailureType :
FailureSide :
Message : Job pickup failure: Resource reservation failed for 'Mailbox Database MAIL01/Mdb
Write' (CiAgeOfLastNotification(Mailbox Database MAIL01)): load ratio 1,79769313
486232E+308, load state 'Critical', metric 2147483647. This resource is currently un
healthy.
FailureTimestamp :
IsValid : True
ValidationMessage :
OrganizationId :
RequestGuid : 4830a2f8-bb0b-4f5e-95f5-510471b6ace2
RequestQueue : Mailbox Database MAIL01
ExchangeGuid : 84ed665e-e8de-4d22-85d6-dbfeefbb572d
Identity : f2320bf6-061b-444d-a9e5-2dc50ccec4a3\4830a2f8-bb0b-4f5e-95f5-510471b6ace2
DiagnosticInfo :
Report :
ObjectState : New
My question is: is there a way to override this error and continue the migration?
Thanks,
Leon
Hi,
It seems that you encountered a log of large items.
Please use the LargeItemLimit parameter to specify the number of large items to skip. Based on the error message, you get 27 large items, you can set the value to 30 to check result.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support
Similar Messages
-
Migrating Public folders Fatal error MapiExceptionNoReplicaAvailable
I am trying to migrate our public folders from our old 2010 server to the new 2013 one. I have created the folders (one) as per instructions and can see the structure under the name "Public" with "Mailbox1" in ecp but when I run the command
to migrate and run the check I see the error referred to above.
The full output from the get-statistics command is
RunspaceId : b6e18ee6-c158-40d7-a6a6-18b04c3d43d9
Name : PublicFolderMigration
Status : Failed
StatusDetail : FailedMAPI
SyncStage : CreatingFolderHierarchy
Flags : IntraOrg, Pull, Suspend, SuspendWhenReadyToComplete
RequestStyle : IntraOrg
Direction : Pull
Protect : False
Priority : Normal
Suspend : True
SourceVersion : Version 14.3 (Build 123.0)
SourceDatabase : Public_Folders
SourceServer : EXCSRV03.Walton.local
BatchName :
OutlookAnywhereHostName :
RemoteCredentialUsername :
AuthenticationMethod : Basic
RemoteMailboxLegacyDN :
RemoteMailboxServerLegacyDN :
BadItemLimit : 0
BadItemsEncountered : 0
LargeItemLimit : 0
LargeItemsEncountered : 0
FolderToMailboxMap : {\}
QueuedTimestamp : 2/22/2014 10:18:37 AM
StartTimestamp : 2/22/2014 10:18:43 AM
LastUpdateTimestamp : 2/22/2014 10:18:46 AM
InitialSeedingCompletedTimestamp :
FinalSyncTimestamp :
CompletionTimestamp :
SuspendedTimestamp :
OverallDuration : 01:10:03
TotalFinalizationDuration :
TotalDataReplicationWaitDuration :
TotalSuspendedDuration :
TotalFailedDuration : 01:09:54
TotalQueuedDuration : 00:00:03
TotalInProgressDuration : 00:00:06
TotalStalledDueToCIDuration :
TotalStalledDueToHADuration :
TotalStalledDueToReadThrottle :
TotalStalledDueToWriteThrottle :
TotalStalledDueToReadCpu :
TotalStalledDueToWriteCpu :
TotalStalledDueToReadUnknown :
TotalStalledDueToWriteUnknown :
TotalTransientFailureDuration :
TotalIdleDuration : 00:00:02
MRSServerName :
EstimatedTransferSize : 0 B (0 bytes)
EstimatedTransferItemCount : 0
BytesTransferred : 0 B (0 bytes)
BytesTransferredPerMinute :
ItemsTransferred : 0
PercentComplete : 10
PositionInQueue :
PreventCompletion : True
FailureCode : -2147467259
FailureType : MapiExceptionNoReplicaAvailable
FailureSide : Source
Message : Error: MapiExceptionNoReplicaAvailable: Unable to get replica list for the folder.
(hr=0x80004005, ec=1129)
Diagnostic context:
Lid: 40487 EMSMDBMT.EcDoRpcExt2
called [length=53]
Lid: 56871 EMSMDBMT.EcDoRpcExt2
returned [ec=0x0][length=192][latency=15]
Lid: 52176 ClientVersion:
15.0.516.30
Lid: 50032 ServerVersion:
14.3.123.2
Lid: 23226 --- ROP
Parse Start ---
Lid: 27962 ROP:
ropGetOwningMDBs [66]
Lid: 17082 ROP Error:
0x469
Lid: 18017
Lid: 21921 StoreEc:
0x469
Lid: 27962 ROP:
ropExtendedError [250]
Lid: 1494
---- Remote Context Beg ----
Lid: 26426 ROP:
ropGetOwningMDBs [66]
Lid: 3010
StoreEc: 0x8004010F
Lid: 3010
StoreEc: 0x8004010F
Lid: 3650
StoreEc: 0x8004010F
Lid: 53151
Lid: 1750
---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure:
0x469
Lid: 16814
Lid: 20910 StoreEc:
0x469
Lid: 61040
Lid: 61104 StoreEc:
0x469
FailureTimestamp : 2/22/2014 10:18:46 AM
IsValid : True
ValidationMessage :
OrganizationId :
RequestGuid : 9929f03f-d4a3-4a1d-945c-22d8bf04d3ca
RequestQueue : Staff_2014
ExchangeGuid : 4db20d25-f308-42d9-83f2-4c104e4aed62
Identity : RequestGuid (9929f03f-d4a3-4a1d-945c-22d8bf04d3ca), RequestQueue:
(6a17b86c-969d-4c16-8210-1d52a28eaa76)
Report : 2/22/2014 10:18:36 AM [EXCSRV05] 'Walton.local/Technicians/Jonathan RUBINSTEIN'
created request.
2/22/2014 10:18:42 AM [EXCSRV05] The Microsoft Exchange
Mailbox Replication service
'EXCSRV05.Walton.local' (15.0.516.29 caps:3F) is examining
the request.
2/22/2014 10:18:42 AM [EXCSRV05] Connected to target
mailbox 'Public Folders
(4db20d25-f308-42d9-83f2-4c104e4aed62)', database 'Staff_2014',
Mailbox server
'EXCSRV05.Walton.local' Version 15.0 (Build 516.0),
proxy server
'EXCSRV05.Walton.local' 15.0.516.29 caps:03DF07FFFF.
2/22/2014 10:18:42 AM [EXCSRV05] Connected to target
mailbox 'Public Folders
(309db159-1c82-407f-a8f2-5e3be77323da)', database 'Staff_2014',
Mailbox server
'EXCSRV05.Walton.local' Version 15.0 (Build 516.0),
proxy server
'EXCSRV05.Walton.local' 15.0.516.29 caps:03DF07FFFF.
2/22/2014 10:18:42 AM [EXCSRV05] Connected to source
mailbox 'Public Folders ()',
database 'Public_Folders', Mailbox server 'EXCSRV03.Walton.local'
Version 14.3
(Build 123.0).
2/22/2014 10:18:42 AM [EXCSRV05] Connected to source
mailbox 'Public Folders ()',
database 'Public_Folders', Mailbox server 'EXCSRV03.Walton.local'
Version 14.3
(Build 123.0).
2/22/2014 10:18:43 AM [EXCSRV05] Request processing
started.
2/22/2014 10:18:43 AM [EXCSRV05] Mailbox signature will
not be preserved for
mailbox 'Public Folders ()'. Outlook clients will need
to restart to access the
moved mailbox.
2/22/2014 10:18:43 AM [EXCSRV05] Mailbox signature will
not be preserved for
mailbox 'Public Folders ()'. Outlook clients will need
to restart to access the
moved mailbox.
2/22/2014 10:18:45 AM [EXCSRV05] Stage: CreatingFolderHierarchy.
Percent complete:
10.
2/22/2014 10:18:46 AM [EXCSRV05] Fatal error MapiExceptionNoReplicaAvailable
has
occurred.
ObjectState : New
We only use one or our existing public folders and I'm wondering about simply unlocking the structure and restoring the emails from Veeam backup. I need to get rid of the old exchange server for disk space. However I'd really like to get the
migration done properly in case we turn out to need some further stuff.
Is there any way to debug this issue and get the migration done?
Many thanksHi Jay,
This issue occurs because there are some legacy system folders in the public folder database.
To resolve this issue, follow these steps:
Open the Public Folder Management Console.
Expand and then click System Public Folders so that it is highlighted and populates the Result pane.
Right-click schema-root and then select Remove.
Right-click all "OWAscratchpad" entries and then select Remove.
Migrate public folders to Exchange Server 2013. For more information about how to do this, refer to the following Microsoft TechNet article:
Migrate public folders to Exchange 2013 from previous versions
More details in the following KB:
Cannot replicate public folder to Exchange Server 2013
http://support.microsoft.com/kb/2866631
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support -
We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=78]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetPropsSpecific [7]
Lid: 21921 StoreEc: 0x40380
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=45]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetReceiveFolderTable [104]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=69]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetAllPerUserLtids [125]
Lid: 17082 ROP Error: 0xFFFFFA84
Lid: 29793
Lid: 21921 StoreEc: 0xFFFFFA84
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0xFFFFFA84
Lid: 25738
Lid: 18570 StoreEc: 0xFFFFFA84
Lid: 23370 StoreEc: 0xFFFFFA84
Lid: 24302
Lid: 32494 StoreEc: 0xFFFFFA84
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source"
This is happening on every mailbox we attempt to move. Any help would be appreciatedThanks for responding
I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
Here is the entire message from the log:
11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
6.0 (Build 7654.0).
11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
Regular Items: 20, 1.906 MB (1,998,818 bytes)
Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
FAI Items: 20, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=78]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetPropsSpecific [7]
Lid: 21921 StoreEc: 0x40380
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=45]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetReceiveFolderTable [104]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=69]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetAllPerUserLtids [125]
Lid: 17082 ROP Error: 0xFFFFFA84
Lid: 29793
Lid: 21921 StoreEc: 0xFFFFFA84
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0xFFFFFA84
Lid: 25738
Lid: 18570 StoreEc: 0xFFFFFA84
Lid: 23370 StoreEc: 0xFFFFFA84
Lid: 24302
Lid: 32494 StoreEc: 0xFFFFFA84
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source
Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
PropTags: [ContainerHierarchy; ContainerContents]
11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job. -
Dear Friends,
Do kindly help me out on this issues. I have installed Microsoft Virtual PC 2007 in my PC and i am trying to create an new virtual machine for several testing. I have a clean ISO image of windows 7 . I import through Captured ISO option. The system tries
to configure the OS . But during the configuration i am getting this error.
*Your PC needs to Restart.
Please hold the power button.
Error Code: 0X0000005D
Parameters:
0x03063A09
0x756E6547
0x49656E69
0x6C65746E
An Internal Virtual Machine error (3) has occured.
The virtual machine will reset now.
I have Enabled the virtualization settings in BIOS.
Kindly help me out to resolve this issue.
Base Machine Platform : Windows 7 - 32 Bit and Windows 7 - 64 Bit.
ISO Image : windows 7 - 32 bit.Error Code: 0x0000005D: Your
CPU is not compatible.
Ref : http://www.winvistatips.com/internal-virtual-machine-error-3-has-occurred-t520964.html
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Runtime error RFC_NO_AUTHORITY has occurred in SM58
Hi Guys,
We are posting some IDocs from SAP R/3 ECC to XI and they get stuck in SM58 with error:
"Runtime error RFC_NO_AUTHORITY has occurred"
Do you have any ideas what this might be ?
Does this have to do with the user that executes the program to send the IDocs or the user used in RFC, because the RFC in SM59 works fine when tested and the user used there is PIAPPLUSER. It is also possible to logon remote.Hi,
Thank you for your reply. Problem solved. I assigned role SAP_ALL to PIAPPLUSER used in the RFC Connection in SM59.
Best Regards,
Evaggelos Gkatzios
Edited by: Evaggelos Gkatzios on May 30, 2010 12:45 PM -
After the Windows 2008 R2 64 bit server got below 2 updates a network share is no longer available. And trying to remap it with correct credentials (that work on a Windows 8.1 64 bit) gives this error: "System error 86 has occurred. The specified network
password is not correct."
Local Policies -> Security Options -> Network Security: LAN Manager Authentication Level
is already set to "LM and NTLM - use NTLMV2 session security if negotiated"
In fact this is how it was working earlier. And it hasn't been changed.
Below 2 updates were installed in past few days:
Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.185.3528.0)
Update for Windows (KB974405)Hi,
Does the network share a DFS share? If so, please install the hotfix below to check the results.
You cannot access a DFS share by using a valid user account in Windows Server 2008 R2, in Windows 7, in Windows Vista or in Windows Server 2008
http://support.microsoft.com/kb/2549311
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I have recently done the update to my iphone and then tried to backup my iphone to itunes and an error meesage has occured and now my phone isn't responding to anything and is stating that it needs to be restored back to manufacturers settings, Can anyone help?
Hi d_diotte,
Thanks for using Apple Support Communities. If you're unable to update your iPhone and keep seeing the "Connect to iTunes" image, this article has some steps you can try:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Ari -
System error 3 has occurred. The system cannot find the path specified
Enterprise Manager 12c Release 2 - 12.1.0.2.0
Agent Deployment Failed - host agent for Windows 32 bit, version 12.1.0.2
Deployment Phase Name: Secure Agent
Error: Execution of command C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent' on host myhost.mydomain.com Failed
Cause: Error Message: System error 3 has occurred. The system cannot find the path specified. Exit Code :2
Recommendation:
Fix the cause of the error and retry the operation (or) manually run the following commands on the remote host
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat secure agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat config agent addinternaltargets'
Any ideas? thanksI installed Cygwin, and it's working fine I suppose. From my EM12c host I can connect to the Windows host via SSH:
ssh WinHost
The authenticity of host 'WinHost (XXX.XXX.XXX.XXX)' can't be established.
RSA key fingerprint is XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'WinHost' (RSA) to the list of known hosts.
oracle@WinHost's password:
Last login: Wed Sep 19 17:26:40 2012 from SomeHost
oracle@WinHost ~
$ cygrunsrv -h
Usage: cygrunsrv [OPTION]...
Main options: Exactly one is required.
-I, --install <svc_name> Installes a new service named <svc_name>.
-R, --remove <svc_name> Removes a service named <svc_name>.
----------------- blah blah blah ------------------------------------
Report bugs to <[email protected]>.
oracle@WinHost ~
$ date
Thu, Sep 20, 2012 10:10:01 AM
oracle@WinHost ~
$ cd /cygdrive/c/oracle/product/emagent12/ - this is the folder where I try to install the agent
oracle@WinHost /cygdrive/c/oracle/product/emagent12
$ ls -la
total 0
drwx------+ 1 oracle None 0 Sep 20 09:55 .
drwx------+ 1 WinHostAdmin None 0 Sep 19 12:31 ..
Thanks -
Runtime error objects_objref_not_assigned has occured
hi,
i created bdc call transaction using (TRIP) tcode. and calling in rfc. in the back end its working properly, and in report also i called this function module and tested, there also getting result
properly, but the problem is, when this RFC used in java application means it showing error like (RUNTIME ERROR OBJECT_OBJECTREF_NOT_ASSIGNED ) has occured.
plz give some solution.......................Dear Klaus sir,
Basicalliy the data is coming from dot net to sap by rfc(zobd_upload) and into table zobd..
after that we are using one program where we can fetch the data from zobd table and using one bdc to update the likp table.but in production likp table is not updating and zobd table updated..
how to resolve that issue?
is any bdc problem? -
Runtime error OBJECTS_OBJREF_NOT_ASSIGNED has occurred
Hi All,
I am trying to run a MM42 BDC in the background and I am getting the error - Runtime error OBJECTS_OBJREF_NOT_ASSIGNED has occurred. Kindly helpDear Klaus sir,
Basicalliy the data is coming from dot net to sap by rfc(zobd_upload) and into table zobd..
after that we are using one program where we can fetch the data from zobd table and using one bdc to update the likp table.but in production likp table is not updating and zobd table updated..
how to resolve that issue?
is any bdc problem? -
Hi,
I am using Oracle 10g database express edition in windows vista business. While i am trying to strat the database it shows error as "system error 5 has occured" and whenever i am trying to connect the databse from SQL * PLUS it thrown error . error as follows." ORA-12154:TNS :could not resolve the connect identifier specified". TNSNAMES.ORA file as below
# tnsnames.ora Network Configuration File: C:\OracleDevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Ganesh)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORACLEXE)
RAM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Ganesh)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
)Hi Muhammad,
The error message is “Access Denied”, you need to logon as an account which has sufficient privileges to perform this action.
In addition, I suggest you open Services and navigate to the problematic service, then check the account information under Log on tab.
Here are some similar threads below I suggest you refer to:
Windows 2008 service access is denied.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/e57de215-a013-40cd-80ea-ed38e2a7f092/windows-2008-service-access-is-denied?forum=winserversecurity
Services Cannot Start on Win Server 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/68215d6c-683e-4495-ab50-26a5ad8ea239/services-cannot-start-on-win-server-2008-r2?forum=winservergen
WS2008R2 shows BFE service will not start - access denied
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f2e08bcf-d517-40a7-9c69-8cacc2fa5330/ws2008r2-shows-bfe-service-will-not-start-access-denied?forum=winservergen
Best Regards,
Amy -
While executing 'Z' BAPI Runtime error CALL_FUNCTION_NOT_FOUND has occurred
Dear Friends,
We Customized 'Z' BAPI but not transported to QA yet,
Is it possible to test with QA by fetch QA data by giving RFC target sys: (QA RFC Destination Name)
If I give RFC target sys: (QA RFC Destination), I am getting Runtime error CALL_FUNCTION_NOT_FOUND has occurred.
How to resole this....
What is method to check this customized BAPI with different server...../
It is working fine for Standard BAPI.
RegardsBut you should be able to call it in the DEV system from QA. This will prove that the RFC part works.
Rob -
I have an imac running with OS X 10.6.8
Then I downloaded Facetime to make it work but when I click on the icon a message error pops up
"An internal error facetime has occured. There was a problem with Facetime - you need to quit Facetime and Open Facetime again"
Is anyone can help to fix the problem - Thank youDid you figure this out? I have the same issue!!
-
Runtime error CONVT_NO_NUMBER has occurred
Dear experts,
I am using BAPI -- 'HR_MAINTAIN_MASTERDATA' to maintain infotype 8(Basic pay).
I debugged the code. The data is coming in IT (that is of type PPROP) from my text file. But it gives runtime error in the FM saying --
"Runtime error CONVT_NO_NUMBER has occurred"
Please guide,
Sumit.hi,
I checked in ST22. It says unable to interpret 4B as a number. Now I went to transaction PA30 and checked it's possible values. There were only 2- 8A and 8B. so I changed it to 8B. But still gives same error, as unable to interpret 8B as a number.
This is my int table while debugging--
line infty(c4) fname(c132) fval(c255) seqnr(n2)
1 0008 P0008-PERNR 40083005 00
2 0008 P0008-BEGDA 01012010 00
3 0008 P0008-ENDDA 31129999 00
4 0008 P0008-TRFAR A1 00
5 0008 P0008-TRFGR ASST.GM 00
6 0008 P0008-TRFST MA 00
7 0008 P0008-BSGRD 8B 00 " here is my 8B
8 0008 P0008-TRFGB 10 00
9 0008 P0008-DIVGV 01 00
10 0008 P0008-ANSAL 192 00
11 0008 P0008-ANCUR 18437 00
12 0008 P0008-WAERS INR 00
13 0008 P0008-LGA01 INR 00
14 0008 P0008-BET01 4000 00
15 0008 P0008-LGA02 4657 00
if fval is of c255, why doen it interpret it's fields as a number? -
Runtime error RAISE_EXCEPTION has occurred
I am running BDC in background for PP03 and getting this error message "Error message: (00/341) Runtime error RAISE_EXCEPTION has occurred" but while running in foreground it is working fine.In mode E there is no error ie successfully executed but in background this exception "Exception condition "CNTL_SYSTEM_ERROR" is raised......Please give details analysis of problem as i am new to ABAP-HR.. Pasting the dump also. ABAP Gurus please dont adivice me to try with other alternates like BAPI etc. As i am doN'T know about BAPI and i am bound to fix the problem by BDC only
Thanks in advanceYou cannot use PP03 in batch. It is not batch compatible.It uses some control framework which work only if the SAP GUI is active or when it is run in foreground. Use PP02 instead.A workaround of the problem would be to switch off the object manager: Set the ADMINISTRATION OBJMG switch in table T77S0 to X or (to deactivate the object manager for specific users only) proceed according to Note 496718.
In the medium or long term, SAP recommends that you use Transaction PP02 only. Transaction PP02 is and will be the only transaction that is fully batch-input-compatible (also in future releases).
Maybe you are looking for
-
Scheduled Task will run on Windows 7, but will not run on Server 2008 R2
So I have a scheduled task that uses nircmd to take a screenshot and then email it to a few company emails each night. With our old Exchange 2003 server, everything works prefectly on the 2008 R2 server (using SMTP). But since we upgraded to Exchan
-
Accessing External Url using Http Utility | Error when using from Weblogic on Solaris
We are using Http Utility (http://jakarta.apache.org/commons/httpclient/) from Apache for accessing external URL. A XML string is sent as POST parameter to the URL and the response is also an XML string. The URL is accessed over HTTPS protocol. I am
-
Referencing images in off-line approjects - possible?
I like to keep my Aperture library as slim and "clean" as possible. I only keep essential shoots and images in the library at any one time. Before the 1.5 update, I was exporting images in the form of approjects in order to keep all versions and imag
-
To make to consider condition value only once
Dear Experts, could you please tell me how i can make the condtion entry in SO level only once. Waht config is required at V/06 in spro. Quick response would be of great help Regards, Siva
-
Create a Domain Controller and a Child Domain using Powershell
Is it possible to create a Domain Controller and a Child Domain using Powershell?